Spl repair to bldg No T-10 (OTM) Accn at Tibri Mil Stn under GE Gurdaspur.

Amount

Demoliton of existing roof treatment removing all foreign material loose dirt, dust, fungus etc cleaning the surface with wire brushes to entire satistaction of Engineer-in-Charge.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in padding levelling etc and roof kerbs complete all as directed.

M&L for APP based polymeric membrane minimum weighting 3kg/ sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt not less than 150gms/Sqm) land on primed surface by forced application laid as per manufacturer's instructions complete all as specified and directed by Engineer-in-Charge with following procedure :- (a) 1st coat applying bitumen primer confirming to IS-3384-1965 @ 0.40 Kg/Sqm to be applied on prepared roof surface till the surface is peroperly impregnated. (b) 2nd coat of bonding material using blown type bitumen conforming to IS-702 of grade 85/25 @ 1.20 Kg/Sqm. (c) 3rd course i.e laying of APP based modified membrane described here-in-before with 100mm overlap in longitudinal direction and 150mm in transverse direction.

M&L for applying one coat of bituminious aluminium paint @ 0.20 Kg Per Sqm over APP membrane, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises all as directed.

M&L for non-skid ceramic tiles of 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11sqm but not exceedig 0.18 sqm in floors set and jointed in neat cement slurry and pointed in coloured cement over 15mm thick screed/bedding layer in CM (1:6) all as specified and directed by Engineer-in-Charge.

M&L for coloured vitrified tiles 10mm thick(square/ rectangular) polished, area exceeding 0.36 sqm, in floor etc set and jointed in neat cement slury over 15mm thick screed/bedding layer in CM (1:6) and filling joint with white cement using pigment to match existing shade/ colour complete all as specified

M&L for coloured vitrified tiles 10mm thick(square/ rectangular) polished, area exc 0.36sqm but not exc 0.72 sqm, in floor etc set and jointed in neat cement slury 10mm thick backing plaster/ screed in CM 1:4 as in skirting and dado etc complete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surfaces 300 x 450 x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of existing surface over 10mm thick backing plaster/ screed in CM (1:4) complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25 mm thick over 15mm thick screed bed or bedding layer in CM 1:4,laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified & directed.

M&L for machine cut kota stone slab 18-20 mm thick in riser of steps, skirting ,dado and pillar laid over cement screed bed 10mm thick in CM 1:4, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & mirror polishing complete all as specified & directed.

Demolition of cement concrete in ground floor & paving n exc 15 cm thick below or above ground level including removing to a distance not exc 50m away complete all as specified and directed by Engr-in-Charge.

M&L for 25mm thick cement concrete type B-0, 1:2:4 (using 12.5mm graded crushed stone aggregates) as in flooring, finished the surface even and fair complete all as specified and directed.

Taking down chowkhats with shutters (without taking off shutters from the frame) area not exceeding 1.5 Sqm each, and removing from site complete all as specified and directed.

All as per Srl item No 14 here-in-before but area exceeding 1.5 Sqm but not exceeding 4 Sqm each.

Taking down shutters without taking off chowkhat exc 1.00 but not exc 2.00 Sqm each complete all as specified and as directed.

S&F 125 x 60 mm size MS pressed steel frames 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete as specified and directed.

S&F 105x 60 mm size MS pressed steel frames 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete as specified and directed.

S&F 35mm thick 2nd class hard wood glazed and skelton shutters as in doors open rebated and prepare to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR Part-I section 8 clause 8.24 (a) complete all as directed.

S&F 35mm thick modular designer flush doors, solid core construction, with block board core and pre-laminated on both faces complete all as specified and directed.

S&F steel window 1.25mm thick box type(primer coated) ERW hollow P section of size 60mmX25mm double rebated comprises guaged skelton & glazed shutter including guard bar ERW sec 50mmX20mm and 1mm thick with two openable leaf consisting two nos sash bar of T-section 20mmX3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mmX25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1(four Nos for each window) including following fitting welded to frame shutter:-(i) Hold fast,150mm long of 12mmX3mm made to shape-04Nos per window (ii) Handle of Z section 20mmX25mm,100mm long-o1Nos per window (iii) MS Tower bolt 150mm long-02 Nos per window (iv) Z sec 20mmX25mm,100mm long stopper -01 Nos per window (v) Cleat 55mm long of hollow square 15mmX12mm-02Nos per leaf (vi) Fabrication & fixing arrangements as Drg No CEJZ/TD-06-07 (vii) M S guard bar 12mm square bars @ 150 mm C/C fixed horizontly.

S&F MS box type ventilator fixed type with glazing bar without wire work and glass as per Drg No CEJZ / TD-1019 /08 sheet 1/3 to 3/3 with guard bar incl. priming coat complete all as specified and directed.

S&F mild steel frame work as in door or gate of angle or other section with gusset plates, rails, braces etc complete drill for fixing of steel sheeting or other covering door etc confirming to Fe-410 W Gde-E-250 complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube fixing in opening all as specified and direcgted by Engineer-in-Charge.

S&F factory made solid panel pace door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having PVC sheet strip of 20mm width in side with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement in the frame at site as per specification & drawing.

S&F 100mm butt hinges, medium weight, cold rolled mild steel all as specified and directed.

S&F 100mm butt hinges, aluminium cast type all as specified and directed.

S&F 150 mm long aluminium handles cast type all as specified and directed.

S&F 200 mm long aluminium tower bolts of extruded section section all as specified and directed.

S&F 250 mm aluminium alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F in repairs floor door stopper 140mm of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor all as directed.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc all as specified and directed by Engineer-in-Charge.

M&L for rendering 15mm thick in CM 1:6 for internal surface of wall and finished even and smooth without using extra cement complete all as directed.

M&L for rendering 15mm thick in CM1:4 for external surface of wall and finished even and smooth without using extra cement complete all as directed.

Rendering 10 mm thick on fair faces of concrete surfaces on ceilings in cement mortar 1:3 and finished even and smooth without using extra cement.

M&L for preparation of new plastered surface and applying two coats of oil bound distemper, over and incl a layer of wall care putty 2mm thick to get even and smooth finish on new plastered surface of internal wall, complete all as specified and as directed.

M&L for preperation of new plastered surface and applying three coats of white wash on newly plastered surfaces of ceiling, complete all as directed.

M&L for prepration of newly plastered/un plastered surfaces of wall and applying two coats of cement base paint of shade as approved complete all as specified and directed.

M&L for complete removal of existing treatment and finishing walls with acrylic exterior paint of required shade with two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and directed

M&L for preperation of old plastered surface rubbing down of distempered and painted surface and complete removal of existing treatment and applying two coats of oil bound distemper over a coat of 2mm thick putty on old plastered surface of internal wall complete all as specified and as directed.

M&L for preperation of old plastered surfaces ceiling and applying two coats of white wash complete all as directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

M&L for 75mm thick cement concrete (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) finished even & smooth without using extra cement as in plinth protection including forming joint to full depth at every 3.0m interval and at every change of direction and filled mixture of bitumen and sand (1:3) by weight complete all as specified and directed.

M&L for 75mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base of floor, path etc complete all as specified and directed.

M &L for chequered cement concrete tile 300x300x 25mm thick with grey cement and pigment including providing cement mortar 1:3 on edges of tiles complete all as directed.

Material & labour PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in coping for brick work, side benching complete all as specified and directed.

S&F in replacement of bib tap, 15 mm dia with wall flange made of cast copper alloy, chromium plated complete all as directed.

S&F in replacement of pillar taps, 15 mm dia, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, complete all specified and directed.

S&F in replacement of stop cock with long shank and cup (concealed type), 15mm dia with wall flange, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe / unions complete all as directed.

S&F in replacement of angular stop cock 15 mm dia with wall flange made of cast copper alloy, chromium plated fancy type complete all as specified and directed.

M&L for medium grade galvanised steel water tubing with and incl all fittings and fixtures, fixed to wall or laid in floors for 15 mm bore, concealed or exposed including taking down old pipe complete all as specified and directed.

All as per Srl item No 51 above but dia 20mm.

S&F of rotational moulded polyethylene cylindrical vertical with closed top water storage tank triple layered white colour 1000 Ltr capacity with connecting nipple, hoisted and fixed in position on new or existing foundation and making GI tubing inlet or outlet connection including taking down old tank complete all as directed.

S&F in repairs 20 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair 20mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (min wt 210 gms) all as specified and directed.

S & F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

S & F in repairs plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F hand shower (health faucet ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repair vitreous China wash hand basin, white, flat back, size 580x450mm excluding taps, waste chain, plug and porcelain stopper but including brackets, CP waste coupling including PTMT PVC connection 600mm long complete all as specified and directed.

S&F brass chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed.

S&F in repairs 10 litres, PVC valve less, syphonic action type, dual type flushing cistern, high level, white inlet, ball valve, float, chain and pull and brackets including PTMT PVC connection 600mm long all as specified and directed.

S&F in repair towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden/ plastic cleats all as specified and directed.

S&F in repairs vitreous china squatting pan, 'orissa' pattern, size 580 x 440 mm white with integral foot rests complete all as specified and directed.

M&L for green marble 16 to 18 mm thick in steps, pillars, window cills, pillars, cooking platforms and the like laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Taking down eaves gutter and rain water pipes including all fittings any size and pattern all as specified.

S&F PVC (SWR) pipe of 110 mm nominal dia, wall thickness of 3.5 mm, type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end socketed, duly fixed with cement solvent etc complete pipe duly laid in trenches or in floors complete all as directed.

S&F PVC (SWR) pipe of 75 mm nominal dia, wall thickness of 3.5 mm, type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end socketed, duly fixed with cement solvent etc complete pipe duly laid in trenches or in floors complete all as directed.

S&F of ringfit PVC (SWR) pipe of 110 mm nominal dia size, wall thickness of 3.5 mm, type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end as self socketed with an integral groove to hold the rubber gasket, with and incl rubber gaskets, ringfit sockets etc, complete pipe duly fixed to wall complete all as specified and directed.

S&F of ringfit PVC (SWR) pipe of 75 mm nominal dia size, wall thickness of 3.5 mm, type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end as self socketed with an integral groove to hold the rubber gasket, with and incl rubber gaskets, ringfit sockets etc, complete pipe duly fixed to wall complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S&F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal complete all as specified and directed.

S&F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal complete all as specified and directed.

S&F PVC floor trap of 75 mm outlet with grating including jointing to waste pipe with solvent cement all as specified and as directed.

M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer complete all as specified and directed.

All as per Srl item No 76 above but applying one coat of synthetic enamel paint on old wooden surface.

M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer complete all as specified and directed.

All as per Srl item No 78 above but one coat on old treated surfaces.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and directed.

S&F figured glass pin headed type, 3mm thick ordinary quality, in squares, not exceeding 0.50 Sqm in each pane fixed oil putty complete all as specified and directed.

S&F stainless steel wire cloth 0.71 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks or galvanized wire staples complete all as specified and directed

M&L for stainless steel curtain rod 25mm dia steel pipe cutting into length as required at site with and including stainless steel end caps/knobs and stainless steel wall mounting brackets complete all as specified and directed.

Demolition of brick work built in cement mortar or lime mortar including all quoins arches, pillars etc complete all as specified and directed.

M&L for brick work with fly ash bricks, straight or curved on plan exc. 6 M mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for half brick thick wall with fly ash bricks, straight or curved on plan to any radius built in cement mortar 1:4, complete all as specified and directed.

M&L for RCC 1:1.5:3 type B0 (using 12.5mm graded crushed stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, chajja, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for mild steel deformed TMT bars 6 to 10mm dia (as in reinforcement) cut to length, bent to shape as required including cranking, bending spirally for hooking for column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

Form work to sofits of suspended slabs such as roof slabs, floor slabs and lintels, chajja landing and similar work n. exc 200mm thick complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes etc. nexc 10 sq m on plan and getting out all as specified & directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. all as specified & directed.

Removing excavated material n. exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified & directed.

Demolition and breaking up old unserviceable drain pipes any type 150 mm bore at any depth set in cement mortar includind PCC bed complete all as specified & directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) concrete bed to drain pipes 150mm bore including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified & directed.

Supplying and laying in trenches, jointing and testing reinforced concrete pipes 150mm, class NP3, laid and jointed complete with collars at any depth over PCC bed complete as specified.

S&F in replacement of PVC connection 450mm long, 15mm dia PTMT complete all as specified and directed.

S&F in repair vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

S&F in repairs 32mm dia waste coupling of PTMT (half or full threaded) (minimum weight 45gms) complete all as specified and directed

M&L for repair to sunken floor treatment and providing as under :- (i) Demolition of concrete of any description and in any position not otherwise specifically provided or in any type of filling in sunken portion & cleaned the sunken incl vertical wall surface complete all as directed. (ii) Laying of 40mm thick (Min) PCC (1:2:4) type B-0 (using 12.5 mm graded crushed stone aggregate) with integral water proofing compound as per manufacturer instructions on bottom of sunken portion with proper slope towards spout. Vertical sides shall be plastered in CM (1:3), 15 mm thick mixed with water proofing compound as per manufacturer instructions. Plaster shall be extended over PCC coving when the same is green i.e. PCC & plaster be carried out at the same time. (iii) After laying sewage/ plumbing pipes with fixtures in position 2 coats of Dr. Fixit Pidifin 2K compound shall be applied. (iv) Test again of water tightness by ponding for 72 hours & rectify defects if any till total elimination of defects. (v) Filling the sunken floor with PCC ( 1:5:10) type E-2 using brick aggregate over the treated surface. (vi) spouts of 25mm dia GI pipe light grade projecting 450mm clear of face outer a wall with mosquito proof cap on inner face of pipe shall be provided to drain out seepage water, including cutting holes and making good if needed as specified and directed.

E/M PORTION Taking down carefully aluminium/ copper point wiring for light, fan, bell, socket of point complete fiitings such as switches, ceiling roses, pendents, regulator socket etc complete at site and making goods disturbed surfaces of walls, floors etc complete all as specified and directed.

M&L for point wiring with PVC insulated and PVC unsheathed multistranded FRLSH copper conductor cable of size 1.5 Sqmm including concealed PVC conduit with fittings and making good to the disturbed surfaces with continuous earth wire of copper 1.5 sqmm dia to common earth including provn of 3mm thick plastic laminated sheet of appropriate size and fixing on CI/MS boxes for mounting of accessories like switch sockets and regulators etc. complete all as specified for One light / Fan/ bell point controlled by one way switch

All as per Srl item No 101 above but one 5 pin socket outlet on independent board.

All as per Srl item No 101 above but one 5 amps socket outlet 5 amps on same board.

All as per serial item No.101 here-in-before but wiring with 2.5 sqmm FRLSH copper wire including earth wire 2.5 Sqmm of copper for 15 Amps 3 pin socket outlet.

M&L for sub main wiring with two runs of single core multi stranded PVC insulated, copper conductor, grade 1100 Volt, FRLSH cable of size 6 sqmm ( red for phase and black for neutral) and including electrical grade PVC conduits of desired colour not less than 1.2 mm thick and 25mm dia and 6sqmm multistranded copper conductor cable PVC unsheathed green coloured for earthing with complete accessories duly connected with earth dolly complete and taking down old unserviceable wiring complete all as specified and directed. Note :- (a) Cost of making good the disturbed surface plastering/ filling putty alongwith matching with the existing colour with MES approval make of distemper is deemed to be included in the quoted rate by contractor. (b) Three run of cable alongwith PVC conduit together shall be measured as single run.

S&F switch piano flush type single pole one way 5 amps complete all as specified and directed.

S&F socket outlet 3 pin 5 amps flush type complete all as specified and directed.

S&F switch flush type 15 amps single pole type one way complete all as specified and directed.

S&F socket outlet 3 pin 15 amps flush type complete all as specified and directed.

S&F in replacement of LED tube light fitting wall mounted with single side connection polycarbonate LED batten with aluminium housing and integrated electronic driver of capacity 20W, four feet and connection with PVC insulated twin core 23/0.0076 twisted copper cable from ceiling rose to tube light fitting, complete all as specified and directed.

S&F wall/ ceiling mounting LED 9/10 watt tube light fitting complete with all accessories with CCT of 6000K suitable for demestic application, 240 volt, 50Hz and internally pre-wired with 1.5 sqmm twin twisted flexible cable copper conductor and connection complete all as specified and directed.

S&F decorative 9W LED wall mounting fittings complete set including 9W LED lamp polycarbonate type B-22 complete all as specified and directed.

S&F PVC insulated sheathed copper wire 1.5 sqmm FRLSH single core 1100 volt for inverter connection in same conduit all as specified and directed.

S&F fan regulator electronic type 100 watts 5 step type size complete all as specified and directed by Engineer-in-Charge.

S&F lamp holder, PVC/ polycarbonate type insulated body with back plate suitable for batten/ angle fittings complete all as specified and as directed.

M&L for ceiling rose, surface bakelite 65x50mm three terminal all as specified and directed.

S&F in replacement GI pipe bracket made out of GI pipe light grade 32 mm bore and bent to shape 1.5m long, MS clamps made out of MS flat iron of size 32mm thick with nuts, bolts and washers complete including dismentling the existing GI pipe bracket and drilling of holes for nuts and bolts etc complete all as specified and directed.

S&F LED street light fitting 35 Watt 230V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Supply and fixing in repair sheet metal enclosure for DB’s when MCB’s to be used of 240 volt 8 way with 200 amps rated bus bar SPN double door complete all as specified and directed. (Note :- All the connection of incoming and out going wire in MCB will be made with thimble with suitable size as directed).

S&F in repair MCB single pole 6 amps to 32 amps, complete all as specified and directed.

All as per Srl item No 120 here-in-before but single pole and neutral 32 amps complete all as specified and directed.

M&L for replacement of distribution board made out of CRCA sheet DB vertical type double door TPN 4 Way MS sheet including fixing in the wall, cutting chases, grounting and necessary patch work and white wash to match with the existing including making connections all as directed containing the folowings:- (Note :- All the connection of incoming and out going wire in MCCB and MCB will be made with thimble with suitable size as directed. (a) MCCB 4 pole 63 amps 16 KA breaking capacity with thermal release: 01 No (In coming). (b) Bus bar made out of aluminium duly insulated wire adhesive tape RYB & black :4 Nos. (c) MCB SPN 40 Amp- 4 Nos, MCB SP 40 Amp- 04 Nos (out going). (d) Connection from MCCB to bus bar will be made with aluminium strip of suitable size as directed).

M&L for earthing complete with galvanised steel earth plate electrode 60cm ×60cm × 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No.3 connected to earthing test point including testing on completion including watering GI pipe 20mm bore medium grade, 15mm bore light grade GI pipe for protection of earth lead including provision of concrete pit in PCC (1:3:6) type C-1, pre-cast RCC (1:2:4) MS bar funnel & wire mesh, excavation and earth work in any type of soil including dismantling existing earthing complete all as specified & directed by Engr-in-charge.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sqmm 3.5 core complete al as specified and directed.

Supply and lay brick common burnt sub class "B" old size for protection of cable laid in trenches for under ground cable all as specified.

M&L for sand cushioning in trenches using fine sand to under ground cable, laid in two layers 15cm before laying the cable and 8cm after laying the cable complete all as specified.

M&L for cable protection GI tubing light grade fixed long the pole/ under road/ along the wall of size 40mm bore with necessary clamps complete all as specified and directed.

A Schedule of Credit for old/unserviceable demolished/ dismantled items has been catered for in the tender. The Schedule of Credit is pre-priced by MES. The final amount of the tender shall be arrived at after deducting the total amount of Schedule of Credit Rs. 47,436/- from the total amount of BoQ as per General Summary sheet catered for after Schedule of Credit.

s.v and co (BID ID -3384737)

buta singh and sons (BID ID -3392549)

BISHAN DASS (BID ID -3392588)

M/S Harjinder Singh Contractor (BID ID -3385157)

M/S DARSHAN & CO (BID ID -3383297)