AR to 6J type houses H. No 1 to 14 8FM type houses 1 to 26 in PGIMS, Rohtak for the year of 2024 25

Amount

Distempering with 1st quality acrylic distemper (Ready mix) having voe content less than 50 grams/ litre of approved brand and manufacture to give an even shade:Old work (one or more coats) (HSR 30.25.1) (Labour Rate)

Regarding terracing of mud phaska covered with tiles or brick, in cement mortar by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement : 3 fine sand), including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded), all complete as per direction of Engineer-in-Charge.(HSR 30.9)

Providing and laying of conglomerate floor 40mm thick cement concrete topping 1:2:4 (HSR 10.8)

Providing and laying of 40 mm thick marble chips flooring rubbed and polished to granolithic finish, under layer 34 mm thick cement concrete 1 :2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) and top layer 6mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 1 mm to 4 mm nominal size, laid in cement marble powder mix 3: 1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 marble chips) by volume, including cement slurry etc. complete, Dark shade pigment with ordinary cement (HSR 10.19.1)

Providing and laying of marble chips skirting up to30 cm height, rubbed and polished to granolithic finish, top layer 6 mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from smallest to4 mm nominal size, laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 marble chips) by volume, 8 mm thick with under layer 12 mm thick in cement plaster 1:3 (1 cement : 3 coarse sand), Ordinary cement without any pigment (HSR 10.25.1.6)

Providing and fixing of Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick (HSR 10.37.1)

Providing and fixing of Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.(HSR 10.38)

15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1 :3 (1 cement: 3 fine sand) (HSR 11.12.1)

15 mm cement plaster on the rough side of single or half brick wall of mix 1 :6 (1 cement: 6 fine sand) (HSR 11.6.2)

12 mm cement plaster of mix 1:6 (1 cement: 6 fine sand) (HSR 11.5.4)

Lime surkhi pointing 2:3 weathered and struck on brick and tile work (HSR 11.31)

Finishing walls with water proofing cement paint of required shade,Old work (one or more coats @ 2.20 kg/10 sqm) complete (HSR 30.35.2) (Labour Rate)

1O mm thick cement plaster 1 :3 (1 cement: 3 fine sand) (HSR 11.4.2)

12 mm cement plaster of mix 1:3 (1 cement: 3 fine sand) (HSR 11.5.2)

20 mm thick cement plaster damp-proof course 1:3 with 2 coats of bitumen at 1.65 kg. per sqm, laid hot and sanded, Vertical (HSR 6.12.1)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade,One or more coats on old work (HSR 30.28.1) (Labour Rate)

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, One or more coats on old work (HSR 30.27.1) (Labour Rate)

Finishing walls with Acrylic Smooth exterior paint of required shade, Old work (Two or more coat applied @ 1.67 litre/ 10 sqm) on existing cement paint surface (HSR 30.37.1) (Labour Rate)

Polishing on wood work with ready made wax polish of approved brand and manufacture, Old work (HSR 30.33.1) (Labour Rate)

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:Float glass panes of nominal thickness 4mm (weight not less than 1Okg/sqm) (HSR 30.54.1)

Shri Salasar Co-OP L & C SOCIETY LTD.

The New Phougat Co-op L&C Society Ltd.