Construction of civil works for 220 kv GIS Sub station focal point Sherpur

Amount

Earth work in excavation in foundations, trenches etc. in all kinds of soils

Dressing of earth work for road

Earth work in filling(exclusive of compensation for earth) in excavation in ordinary soil or soil containing gravel or kankar upto 40 % and filling in 15 cm layers in foundation and plinth including ramming, watering and consolidating under floors with earth brought from a distance not exceeding 30 metres

Disposal of excavated earth within a lead of 1.00 Km

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)

Centering and shuttering for faces of wall

Centering and shuttering for faces of wall

Centring and Shuttering for faces of concrete in columns square or rectangular.

Centring and shuttering for sides and soffits of Beams,beam launching girder bressumers, lintels

Centring and shuttering for flat surfaces such as suspended floors, roofs,landings, chajjas, shelves etc.

Centering and shuttering for stair case with sloping siffits including rises and stringers

Cement Concrete 1:8:16 with 40mm gauge stone aggregate.

Cement Concrete 1:6:12 with 40mm gauge stone aggregate.

Cement Concrete 1:4:8 with 20mm gauge stone aggregate.

Cement Concrete 1:4:8 with 40 mm gauge stone aggregate.

Cement Concrete 1:3:6 with 20mm gauge stone aggregate.

Cement Concrete 1:2:4 with stone ballast or shingle.

Reinforced cement concrete M-25 Mechanical mixed excluding steel reinforcement centring and shuttering in foundation and plinth

Reinforced cement concrete M-25 Mechanical mixed excluding steel reinforcement centring and shuttering in superstrutures

Damp proof course 4 cm thick of cement concrete 1: 2: 4 with two coats of bitumen 20/30 penetration @ 1.65 kg per sqm laid hot and sanded.

supplying and laying of brick bats in well shafts

First class burnt brick work laid in cement sand mortar 1:7 in first storey upto 4 metres above plinth level.

First class burnt brick work laid in mud mortar in foundation and plinth.

First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth.

First class burnt brick work laid in cement sand mortar 1:6 in superstructure

115mm thick brick work 1:4 in Superstructure

First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth.

First class burnt brick work laid in cement sand mortar 1:5 in superstructue

Extra labour rate for 1st class Brick work in well shaft

First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth.

Extra for brick work done above 4.0 mtrs

Extra for brick work done upto 4.0 mtrs above the top of structural roof of lower storey

Extra for 100/115 mm thick wall for additional storey upto 4.00 mtr abovr the top of structural roof of lower storey

Top khurra 0.6m x 0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick cement concrete 1:8:16.

Bottom Khurra on ground 1.2m x 0.6m consisting of brick on-edge laid in cement mortar 1:3 over 75mm cement concrete 1:8:16 including 12.5mm thick cement plaster 1:3

Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified.

Providing and fixing 110 mm dia SWR U.P.V.C Rain water pipe (ring fitted type-A) as per IS:13592 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-incharge. (If fixed on wall face clamp to be paid separatly as per respective item)

Providing and fixing 110 mm dia SWR U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.

Providing and laying integral cement based water proofing treatment includimg prepration of surface as required for treatment of roofs,balconies,terraces etc complete as per CSR

providing and fixing of false ceiling at all hieghts 0f 600x600x15 mm Mineral fibre ceiling tiles laid in grid system. The frame work comprise of made od GI 120GSM coating with minimum .30mm thickness main suppoerts spaced at 1200mm c/c

Conglomerate floor 25mm thick cement concrete topping 1:2:4.

Conglomerate floor 50 mm thick cement concrete topping 1:2:4.

Screed of 40 mm thick CC 1:8:16 to be laid below topping using mechanical mixer for mixing of material

62 mm thick cement concrete flooring with concrete hardner topping under layer 50 mm thick cement conc 1:2:4

Plinth protection/ brick or tile flooring laid in cement sand mortar 1:4 on 100mm thick cement concrete 1:8:16 and 100mm thick sand filling and cement pointed 1:2 on top.

Anti-skid floor tiles 10mm thick in flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with white cement slurry in joints including corners angles and beading.

P/F Coloured glazed Tiles

Providing and fixing coloured grenite stone tiles 15 mm to 20 mm thick in skirting risers of steps and dado

Providing and laying polished grenite stone 18 mm thcik flooring in required design

Providing and laying vitrified floor tiles of Size 600 x 600 mm in different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete as per CSR

Providing and laying 60 mm thick factory made interlocking paver blocks of M-35 grade oridinary grey colour

Prov. & fixing alkali resistant anti acid tiles(290 x 290 x 10 mm ) Johnson tiles or equivalent flooring

12.5 mm thick cement plaster 1:3

12.5 mm thick cement plaster 1:4

12.5 mm thick cement plaster 1:5

12.5 mm thick cement plaster 1:6

20 mm thick cement plaster 1:4

20 mm thick cement plaster 1:5

6 mm CP 1:4 under side ceiling

20 mm th. Vertical DPC of CP 1:3 with 2-coats of hot bitumen

Preparation of plastred surface or concrete surface for distempering including surface applying filling with approved quality filler consisting of POP including finishing of surface.

Finishing walls with exterior decorative cement based pint such as snowcem,Robbicem etc

Painting two coats of synthetic enamel paint over one coat of primer on new steel or iron surface

Finishing walls with premium acrylic smooth exterior paint with silicon additives of required shade with two or more coats including base coat.

Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two coats)

Painting with acid proof paint of approved brand and manufacture to give an even shadetwo coats

Preparation of plastred surface or concrete surface for painting PE (incluiding sand papering the surface ) using ready mixed cement based wall putty by applying 2-coats to get required finish.

Providing and fixing brass 100 mortice latch and lock with 6 lever with pair of handle( Best make of approved quality alluminum door)

Providing and fixing brass 100 mortice latch and lock with 6 lever without pair of handle( Best make of approved quality alluminum door)

Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (Excluding sliding bolt) more than .50 sqm

Factory manufactured flush doors fixed in position iron hinges etc (excuding the cost of any fittings other than specified above but including labour for fixing the same in position(code II revision !S-2191 part I 1973) 35 mm thick

Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete

701 mm to 850mm

850mm to 1000mm

Providing and fixing aluminium work for doors,windows, ventilators & built up standard tubular sections & other sections 733 & IS 1285 of Jindal / equivalent make approved ny engg incharge fixed with rawl plugs & screws with fixing clips or with expansion hold fastners i/c necesasry fitting up to gap at junctions, top, bottom a7 sides reqiored PVC plugs Aluminiumsections shall be smooth rusat free straight & jointed mechanically complete as per architectural drawings & the directions of engineer incharge.

Fixed portion for chowkats

Shutters of doors / windows/ cup Boards

P&F 12 mm Prelaminatrd particular board flat pressed 3 layers or graded wood particular board conforming to IS 12823 in panneling fixed in al. doors with CP brass/stailess steel screws compl;ete as per drawing

P&F glazing in aluminium doors windows ventilators shutters & partitions as per architectural drawings and the directions of engineer incharge(Float glass panes of 5.5 mm thickness)

P/F aluminum sliding Bolts

P&F Powder coated extruded sections periheral frame

Providing and fixing MS rail weighing 44.64 kg/mtr or 90 lbs/mtr and 52 kg /mtr

Steel work, fixed independently without connecting plates, including cutting, hoisting and fixing in position Steel ,75x12mm

Structural steel work in angles.tees,flats etc rivetted or welded in/c cutting fixing all gusset plates bolts, nuts complete with hoisting

Wrought iron and mild steel ladders , framed grills ,grating etc.window guards,iron doors,stair case,iron railingincluding cost of bolts and nuts or screws complete fixed in position

MS Foundation Bolts

Mild steel reinforcement for RCC work where not included in the complete rate of RCC including bending, binding and placing in position complete: ,40mm dia earth rods

Cold twisted deformed (Ribbed/ Tor Steel Bar) Bars Fe 500 grade as per IS 1786-1985, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete

Supplying and fixing rolling shutters of approved make

Providing and fixing ball bearing for push and pull type rolling shutter

Extra for providing mechanical device,chain and crank operation for operating rolling shutter exceeding 11.20 sqm in area of the rolling shutter

Providing and fixing 50NB medium class MS pipe stair case railing having two no horizontal pipes and vertical pipe at 1500 c/c including cutting and welding and two coats of red oxide primer.

Welding by gas or by electric plant, including carriage to and from workshop.

Powder Coating to alluminium section

Providing Weep holes 25 mm dia at every 2.00 mtr distance with 25 mm dia PVC pipe

Boulder filling under floors 230 mm thick complete

Compacting original ground level below road crust as per (a)specificationsLoosening, leveling and compacting original ground up to a level of 500mm below road crust, mixed with water at OMC, levelled, graded and compacted in layers by rolling so as to achieve minimum dry density as given in Table 300-2 for sub grade construction as per technical clause 305 of MORT&H specifications

Water Bound Macadam Grading I Providing, laying, spreading and compacting stone aggregates of Grading III to water bound macadam specification including preading in uniform thickness, hand packing, rolling with smooth wheeled roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density complete as per technical clause 404 of MORT&H specifications ORT&H specifications

Water Bound Macadam Grading III Providing, laying, spreading and compacting stone aggregates of Grading III to water bound macadam specification including preading in uniform thickness, hand packing, rolling with smooth wheeled roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density complete as per technical clause 404 of MORT&H specifications ORT&H specifications

Plain cement concrete M-20 grade precast kerb 250mm high with bottom width 165mm and top width 115mm fixed in position on earth base including carriage to site of work complete as per technical clause 408 of MORT&H specifications

Providing and filling joint sealing compound with coarse sand and 6 percent bitumen by weight complete as per drawings and technical clause 2605 of MORT&H specifications

Providing and fixing 25 mm thick compressible fiber board in expansion joints complete

WATER SUPPLY AND SANITARY INSTALLATIONS

Providing and laying ,fixing and jointing of ISI marked HDPE pipe as per ISI 4984-1995, 4kg/cm square pressure

100 mm o/dia

250 mm dia

300 mm dia

Providing laying ,fixing and testing CPVC pipe lines ISI mark with specials such as tees,bends,sockets elbows etc

1) 20 mm o/dia

Providing laying ,fixing and testing CPVC pipe lines ISI mark with specials such as tees,bends,sockets elbows etc

1) 25 mm o/dia

Providing and fixing and jointing GI/PVC union couplings

20 mm dia

25mm dia

Providing ,lowering ,cutting jointing ,salt glazed stone ware pipes and specials ISI marked as per Is 651-2007

Providing and fixing jointing ISI marked gun meta lpeet valves

20 mm dia for outlet pipes

25 mm dia for inlet pipe

Cutting holes upto 23cm square thorugh B.B. in cement walls for pipes, and making goo/d including repointing, replastering and finishing according to existing finish where required through wall 22.86 cm thick

Boring with 100 mm diametre casing pipe for tube well in all kinds of soils except ordinary hard rocks requiring blasting including removing the casing pipe after the hand pipe/tube well is lowered and tested Upto 0-15 mtr depth

Boring with 200 mm diametre casing pipe for tube well in all kinds of soils except ordinary hard rocks requiring blasting including removing the casing pipe after the hand pipe/tube well is lowered and tested

Upto 150 m depth BGL

Supplying and fixing well cap having thread to fix on housing pipe complete in all respects

Supplying,assembling, lowering and fixing in vertical posotion in bore well unplasticized of PVC Pipe 150 mm o/dia

Supplying,assembling, lowering and fixing in vertical posotion in bore well unplasticized of PVC medium well screen (RMS) Pipes 125 mm o/dia

Providing lowering in trenches to correct gradient and alignment ,jointing with tyton rubber joints and cutting of RCC pipes

Extra for providing 1:2 cement sand mortar on tyton joints of RCC pipes

Providing and fixing in position single socket SWR UPVC soil waste or antisyphonage pipes as IS 13592 (110 mm o/d)

Providing and fixing in position C.I soil waste or antysyphonage pipes ISI specifications of E.D.C manufacture

100 mm dia

Providing and fixing in position single socket SWR UPVC soil waste or antisyphonage pipes as IS 13592 (75 mm o/d)

Providing and fixing in position HCI grating 150x150 mm for gully trap

P&F in position 100 mm dia C.I cowel

Providing and laying in trenches to correct gradient and alignment and jointing of UPVC pipes having ISI specifications IS 15328-2003 class SN8 160 mm o/d

Cutting holes upto 23cm square for pipes in flooring and roofs of bricks, tiles with lime concrete or cement concrete and making good including repointing, replastering and colour or white washing where required

Through floor or roof 15.00cm thick

Excavation in open cutting or in streets and lanes for intramural sullage drains complete as per CSR item

Earth work in excavation in Foundations Trenches etc. complete as per CSR itm

For all classes of soil except rocky.

R.C.C. Manhole cover 500mm i/d Heavy duty

R.C.C. Manhole cover Light duty Rectangular single/double seal pattern 450mm x 600mm clear inside opening

Construction of brick masonry inspection chambers size as given below upto 0.60 m average depth in 1:5 cement sand mortar complete as per CSR item

Extra for every 0.3 m depth of I/C

P & F in position Chinaware Europeon type water closet P-trap or S-trap ( to be approved of the Engineer Incharge) suit consisting of 10 ltr PVC flushing cistern supported on angles iron brackets,short bend 32 mm dia i/c cost of solid white cover complete in all respect & to the entire satisfaction of engineer in charge

Providing and fixing 10 litres capacity Chinaware low level flushing cistern with PVC internal fitting, instead of 10 litres capacity PVC flushing cistern.

Providing and fixing C.P. Brass short flush bend 32mm instead of PVC short bend.

Providing and fixing jet spray with 2,-6" long PVC pipe CP brass nut

Providing and fixing in position sensor battery operated for urinal of approved make to the approval of Er-incharge complete in all respects

Extra for providing & fixing PVC 32 mm dia waste pipe up to floor level & plumbing joints

Providing fixing partition for different type of urinals (toughned glass partitio)

Providing and fixing SS health faucet complete in all respects

Providing and fixing in position best Indian make white ordinary lavatory suites consisting of C.P. brass waste 32mm dia, pair of angle iron bracket with one C.P. brass tap complete.Size 550 mm x 400 mm

Providing and fixing in position 32 mm dia G.I waste pipe embedded in wall 2.8 mm thick upto floor level including cost of wipped solder joint etc. complete as required by the Engineer in charge.

Providing and fixing in position best Indian make chromium plated brass, Bottle trap 32mm dia with 40 mm seal .

Providing and fixing in position best quality stainless steel sinks with complete fitting. Over all size 1070x464 mm and bowl size 555x475x200 mm

Providing and fixing in position paper holder of approved make fixed into wall complete

Providing and fixing in position towel rails / ring fixed in with rawl plugs embedded in walls with brass rews, complete in all respects including cutting and making good the walls etc.

Providing and fixing in position acrylic size 510x130 shelf fixed in with rawl plugs with C.P brass screws complete ncluding cutting and making good the walls etc.

Providing & Fixing in position best indian make bevelled edge 5mm thick mirror mounted on 4mm thick ardboard sheet ground fixed in position by means of 4 nos. chromium plated brass screws and washers over rubber washers and rawl plugs embedded in the walls or chromium plated brass clamps with C.P. rass screws (as required by the Engineer-in- Charge) complete including cutting and making good the walls etc.

Providing and fixing inposition CP/ alluminium Khunti of approved make

Providing & Fixing in postion 15 mm i/d bib cock of best quality (as approved by the Engineer-in-charge).

Providing & Fixing in postion stop cock / Angle valve (as approved by the Engineer-incharge).

Providing and fixing inposition liquid soap container CP brass

Providing & fixing in position best Indian make PVC flexible tube connection.

PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut

Providing and fixing SWR UPVC specials for soil waste vent or antisyphonage pipes as per ISI 14735

Floor trap 110x110 mm

Floor trap 110x75 mm

Y junction

Elbow 110 dia

Elbow 75 mm dia

Providing and fixing SS grating with frame over floor traps

Providing and placing in position on terrace at all floor levels HDPE water storage tank of approved make with cover with suitable lockingarrangement and making necessary holes

Providing and fixing in position GI tank nipple

20 mm dia

25 mm dia for inlet pipe

Providing and fixing in position gully trap fixed cement concrete 1:4:8 complete with grating 150mmx150mm

ELECTRICAL WORK

Wiring Fanpoint without fan box in PVC insulated copper conductor single core cable ISI marked overall 1.50sqmm, 1100 V grade with step type elecronic fan regulater 100 Watts ( socket size)

Wiring Fanpoint with sheet metal fanbox ( shape hexagonal and sheet thickness not lessthan 1.6mm) in PVC insulated copper conductor single core cable ISI marked overall 1.50sqmm, 1100 V grade with step type elecronic fan regulater 100 Watts ( socket size)

Wiring light point in PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sq. mm, 1100volts grade.

Wiring call bell point

Wiring 3 Pin 6 Amp. Plug control comprising wall socket and switch including bonding to existing earth with PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1 sq. mm, 1100volts grade complete.

Wiring 16/20 amp. Plug in PVC insulated copper conductor

Wiring light point with double control switches

supply and erection of PVC insulated single core FRLS 1.5 mm copper conductor

supply and erection of PVC insulated single core FRLS 2.5 mm copper conductor

supply and erection of PVC insulated single core FRLS 4mm copper conductor

supply and erection of Haevy gauge welded conduit pipe 25 mm dia

Heavy gauge flexible conduit pipe 25 mm dia (ISI Mark) on surface

Call Bell 220/230 volts AC ding dong

Supply and errection of RCCBO ( Resedual Current braker over load) for earth leakage ,over load and short circuit protection suitable for 240/415 volts 50 cycles AC supply with breaking capacity of 10KA as per IEC 61009 in the existing MCB distribution board as per PWD specifications including connection with suitable size if thimbles/lugs

RCCBO Double pole 32 amp sensicity 30MA

RCCBO Four pole 63 amp sensicity 100MA

RCCBO 63 ampere Double pole 100 amp

Miniature circuit breaker single pole 16 amp. (Breaking capacity 10kA, Curve-C) suitable for 240/ 415 volts 50cycles AC supply

Supply and errection of sheetmetal double door distribution board suitable size and of required no of bays for mounting miniature circuit breakers/RCBO's/RCCB; in the exisiting MCB distribution board as per PWD General Specifications 2010 including connectionswith suitable size of thimles and bonding to existing earth etc GROUP-B(Havell's,HPL,ABB ,standard & other brands approved PWD.

T.P &N double door distribution board 6 way each

T.P &N double door distribution board 12 way each

NS ITEMS

Providing and fixing removable raised/false access flooring with system and its components of approved make for different plenum height with possible height adjustment upto 50 mm, comprising of modular load bearing floor panels supported on G.I. rectangular stinger frame work and G.I. Pedestal etc. all complete, as per the architectural drawings, as specified and as directed by Engineer-in-charge as per DSR 11.54 .2 specifications

Extra for additional height of plateform 150mm

Providing and fixing steel door with frame double shutter as per desighn and drawing complete

Door D4 &D5 (1.5x2.5m)

Providing and fixing steel doorfactory manufacruted as per drawing no 08DFG19-TM-5300-S-7133

Single leaf door FD2 (1.2mx2.1 m)

Double leaf door FD1 (1.5mx2.5M)

Providing Powder Coating on Aluminium Sections

Providing and fixing laminated Float safty glass fixed window

P&F Toughened Glass 12 mm thick

P&F Toughened Glass 6 mm thick

Providing and laying 125 micron polythene sheet between PCC and RCC NS

Providing & Fixing cable racks of MS angls40x40x5 mm and MS Flat 75x6mm

P/F MS Chequred palte 5mm thick

P & F M S Angle Iron nosing 50x50x6mm

P & F M S Angle Iron nosing 30x30x3mm with ms flat 15x4 mm

P&F Base plates235x220x12mm

P&F M S cleats 65x65x6 mm

P&F 12.5 mmx300mm long anchor bolts

Wire Gauge in aluminum windows

S/F of RCC drain cover of size 910mmx300 mm

Fixing of Template

P/F GI sheet of TATA make Durashine complete as pr specifecations

Prov./Fixing 200 watt gate light posts/ lantern of Crompton Greeves / Bajaj/Equivalent

P/F of Steel gate 5.80 mtr wide

P/F angle iron posts of various sizes

P/F barbed wire complete in in four rows

Providing and fixing Chain link wire net fencing 1.8 mtr high

P/F barbed wire complete in in 6 rows

Providing and fixiing conceritina barbed wire coil 600 mm dia complete

Supply and fixing tube fittings of Bajaj make on wall (Model BTIR-228) of 1x28 W surface /Pendal mounted T5 luminaire

P/F ceiling fan 1400 mm sweep crompton make

S/F Exhaust fan 12" sweep of Crompton make including louver ( Model-T5JB1328EB) of v1x28 WT-5

S/F Exhaust fan 18" sweep of Crompton make including louver ( Model-T5JB1328EB) of v1x28 WT-6

Supplying and fixing exhaust fan 627 mm sweep of Crompton Make including louvers (Model T5JB132EB)

S/F Ceiling light of 2"x2"of Bajaj make( Model-BZRSOL 2x36 W GZIWH/equvilant)

Providing &b fixing High bay/Medium Way fixuture supported from truss/roof Bajaj Make (Model A200112BGHBM nxt B156 WH NB SD/equivilant

P&F Flame proof Tube fittings of Bajaj make (BJEX FTL 236) of 2x28 W T-5

Flooring of Cement Concrete 1:5:10 with crushed stone 20 mm size mechanically mixed laid in 75 mm thickness in blocks of size 3.0mx3.0m using shuttering complete in all respect including preparation of surface for laying concrete.

Providing & Laying of cement Slurry of cement to sand ratio 1:6 using cement content not less than 150kg per 100 Sqm area complete.

Supplying and Spreading of 20 mm size crushed stone in 75 mm thick layer over pcc flooring in the yard area.

Extra carriage of material beyond 5.00 Km

Cement

Steel

Earthing Rod

Fine Sand

Landing Rate

Extra carriage and Difference of rate for Bricks

Extra carriage and Difference of rate of Crusher 13.2/12

Extra carriage and Difference of rate of Crusher 11.2/10

Extra carriage and Difference of rate of Stone Ballast

Extra carriage and Difference of rate of Coarse Sand

Bidder Name

Amount in Words

GURU CONSTRUCTION CO.

Mahesh Kohli Goverment Contractor

SOHAN LAL MEHTA

SATYAN KUMAR GOVT CONTRACTOR

SATYAN KUMAR GOVT CONTRACTOR

GURU CONSTRUCTION CO.

SOHAN LAL MEHTA