Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹7.6 Cr
EMD Value
₹7.6 L
Closing Date
13 Jul 2023, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Construction of Govt. Girls High School at Jajpur Town, Jajpur, Odisha.
NBCC/SBG/BBSR/DMF-JAJPUR/2023/01
NBCC/SBG/BBSR/DMF-JAJPUR/2023/01
Open Tender-Domestic
Civil Works General
Jajapur, Odisha
₹11,800
₹7.6 L
13 Jul 2023
14 Jun 2023
13 Jul 2023
13 Jul 2023
17 Jul 2023
No. SOR SOR AMOUNT SOR AMOUNT SOR AMOUNT SOR AMOUNT
AMOUNT Total AMOUNT Total AMOUNT Total AMOUNT Total AMOUNT Total
AMOUNT(Rs.) (Rs.) (Rs.) (Rs.) (Rs.)
1 CIVIL WORK : 4043167.116 2935138.23 6978305.34 23540102.78 1609272.14 25149374.92 843261.44 39552.00 882813.44 7293254.27 1051065.16 8344319.43 35719785.61 5635027.52 41354813.13
2 PLUMBING WORK : 1904529.35 82858.00 1987387.35 0.00 681398.00 681398.00 0.00 452271.00 452271.00 0.00 47783.00 47783.00 1904529.35 1264310.00 3168839.35
3 ELECTRICAL WORKS: 0.00 840512.76 840512.76 0.00 4925393.81 4925393.81 0.00 194543.09 194543.09 0.00 2417683.80 2417683.80 0.00 8378133.46 8378133.46
4 FURNISHING: 0 0.00 0.00 0.00 9420912.78 9420912.78 0.00 0.00 0.00 0.00 0.00 0.00 0.00 9420912.78 9420912.78
Total 5947696.47 5526531.95 11474228.41 23540102.78 17354321.72 40894424.51 843261.44 686366.09 1529627.53 7293254.27 3516531.96 10809786.23 37624314.96 27083751.71 64708066.67
GRAND TOTAL 76355518.67
GRAND TOTAL 76355518.67
Digitally signed Architects
by RAJESH
DULALCHANDRA MANDAL
Date: 2023.06.14 16:44:45 IST
Govt. Girls High School, Jajpur
SITE DEVELOPMENT - ABSTRACT OF COST
SITE DEVELOPMENT, GOVT. GIRLS HIGH SCHOOL, JAJPUR, ODISHA.
ABSTRACT OF COST
SL.N NON-SOR TOTAL AMOUNT
SL.N NON-SOR TOTAL AMOUNT
DESCRIPTION OF WORK SOR AMOUNT (Rs.)
O. AMOUNT (Rs.) (RS)
A CIVIL WORK :
I EARTH WORK 9,27,700.30 - 9,27,700.30
II CONCRETE WORK 9,05,829.54 - 9,05,829.54
III REINFORCED CEMENT CONCRETE WORK 11,35,550.57 - 11,35,550.57
IV BRICK WORK 6,46,066.73 - 6,46,066.73
V MARBLE & GRANITE WORK - - -
VI WOOD AND P.V.C. WORK - - -
VII STEEL WORK - 4,46,652.92 4,46,652.92
VIII FLOORING WORK 38,631.00 20,33,023.61 20,71,654.61
IX ROOFING WORK - - -
X FINISHING WORK 3,89,388.97 4,55,461.70 8,44,850.67
XI GLAZING WORK - - -
XII WATER PROOFING WORK - - -
TOTAL (A) 40,43,167.12 29,35,138.23 69,78,305.34
B PLUMBING WORK :
I SANITARY FIXTURES & CP BRASS FITTINGS - - -
II SOIL, WASTE, VENT & RAIN WATER PIPES 19,04,529.35 82,857.94 19,87,387.29
III WATER SUPPLY SYSTEM - - -
TOTAL (B) 19,04,529.35 82,858.00 19,87,387.00
C ELECTRICAL WORKS:
I INTERNAL ELECTRICAL WORKS 8,40,512.76 8,40,512.76
TOTAL (C) - 8,40,512.76 8,40,512.76
F HORTICULTURE (D) 4,50,000.00 4,50,000.00
G PLAY AREA € 12,18,022.96 12,18,022.96
Grand Total 1,14,74,228.06
Grand Total 1,14,74,228.06
2.0 ADD GST @ 18% ON [G] 20,65,361.05
SUB-TOTAL [I+J]=[K] 1,35,39,589.11
Govt. Girls High School, Jajpur
SITE DEVELOPMENT - CIVIL DETAILED ESTIMATE
SITE DEVELOPMENT, GOVT. GIRLS HIGH SCHOOL, JAJPUR, ODISHA.
DETAILED ESTIMATE
SL.N AMOUNT
SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS) AMOUNT (RS)
I 1.0 EARTH WORK
Earth work in ordinary soil with initial lead and lift including
rough dressing in layers not exceeding 0.3m in depth and the
1 SOR cum 110.98 143.96 15977.30
Earth transported by transport vehicles as directed by the
Engineer-in-charge.
Extra lift or 1.5m or part there of over the initial lift of 1.5m in all
2 SOR kinds of embankments and road works and ordinary earth work
in general.
a) 1st Extra lift of 1.5m (up to 7.5m) cum 18.75 15.37 288.20
Single under reamed pile foundation with RCC M25 using
12mm size black hard granite crusher broken chips including
3 SOR cost of borring but excluding cost of M.S./Tor steel and labour
charges for cutting, bending and binding of steel.
a 600mm dia and 6.0M long. each 75.00 12323.80 924285.00
Filling in foundation and plinth with excavated materials
4 SOR including watering and ramming as directed by the Engineer-in- cum 755.84 80.00 60467.34
charge of earth work.
5 SOR Transportation of earth from site upto 15km cum -644.86 237.67 -153263.64
Filling in foundation and plinth with filling sand, watered and
rammed including cost of material, labour, royality and
6 SOR cum 99.00 361.90 35828.10
transportation etc. complete as per specifications and as
directed by Engineer-in-charge.
Supplying chemical emulsion in sealed containers including
delivery as specified.
Chlorpyriphos/ Lindane emulsifiable concentrate of 20% litre 7.20 172.50 1242.00
Diluting and injecting chemical emulsion for POST-
8 SOR CONSTRUCTIONAL anti-termite treatment (excluding the cost
of chemical emulsion) :
Treatment of soil under existing floors using chemical emulsion
@ one litre per hole, 300 mm apart including drilling 12 mm
diameter holes and plugging with cement mortar 1 :2 (1 cement
: 2 Coarse sand) to match the existing floor:
With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
TOTAL EARTH WORK 927700.30 0.00
II 2.0 CONCRETE WORK
C.C (1:3:6) with 25mm to 40mm size crrusher broken metal
including all cost, conveyance,royalty & taxes etc.comp.to work
9 SOR cum 3.58 4632.10 16571.34
site as per specification approved by the department & direction
Cement concrete (1:2:4) with 12mm size hard broken granite
chips.
a 1st floor cum 141.08 6087.00 858723.53
C.C (1:4:8) with 25mm to 40mm size crrusher broken metal
including all cost, conveyance,royalty & taxes etc.comp.to work
11 SOR cum 7.16 4267.60 30534.68
site as per specification approved by the department & direction
TOTAL CONCRETE WORK 905829.54 0.00
III 3.0 REINFORCED CEMENT CONCRETE WORK
Providing M.S. reinforcement for R.C.C. work including cutting,
12 SOR bending, binding and tying the grills and placing in position Qtl. 94.48 7841.20 740843.73
including cost of binding wire 18 to 20 gauge.
Providing, hoisting laying of Reinforced Cement concrete of
Grade M-25 including all material & labour charges and also
13 SOR including shuttering and centring but excluding reinforcement
etc. complete as per specifications and as directed by Engineer-
in-Charge of the project.
C1 - Page 1 of 4 For Niche Architects
Govt. Girls High School, Jajpur
SITE DEVELOPMENT - CIVIL DETAILED ESTIMATE
SITE DEVELOPMENT, GOVT. GIRLS HIGH SCHOOL, JAJPUR, ODISHA.
DETAILED ESTIMATE
SL.N AMOUNT
SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS) AMOUNT (RS)
a Footings cum 18.23 5318.70 96933.31
b Columns below plinth cum 4.76 11099.90 52846.62
c Grade slab under floor on plinth lvl. cum 0.56 9481.20 5333.18
d Plinth beam cum 11.35 5674.50 64395.69
e Columns above plinth cum 5.95 11099.90 66058.28
f Slab beam cum 9.83 11099.90 109139.77
TOTAL REINFORCED CEMENT CONCRETE WORK 1135550.57 0.00
IV 4.0 BRICK WORK
Brick work withFly ash bricks 25 cm x 12 cmx8cm size having
crushing strength not less than 75 Kg/cm2 with dimensional
14 SOR cum 8.24 4197.50 34566.41
tolerance +8 percent in cement mortar (1:6) in foundation.
Brick work withFly ash bricks 25 cm x 12 cmx8cm size having
crushing strength not less than 75 Kg/cm2 with dimensional
15 SOR cum 144.38 4235.50 611500.31
tolerance +8 percent in cement mortar (1:6) in Super Structure
TOTAL BRICK WORK 646066.73 0.00
V 5.0 MARBLE & GRANITE WORK
TOTAL MARBLE & GRANITE WORK 0.00 0.00
VI 6.0 WOOD AND P.V.C. WORK
TOTAL WOOD AND P.V.C. WORK 0.00 0.00
VII 7.0 STEEL WORK
Steel work in built up tubular/built up sections/ framed work,
(round, square or rectangular hollow tubes etc.) trusses etc.,
including chequered plates, cutting, hoisting, fixing in position
and applying a priming coat of approved steel primer, including
welding and bolted with special shaped washers etc. complete.
Electric resistance or induction butt welded tubes kg 4086.49 109.30 446652.92
TOTAL STEEL WORK 0.00 446652.92
C1 - Page 2 of 4 For Niche Architects
Govt. Girls High School, Jajpur
SITE DEVELOPMENT - CIVIL DETAILED ESTIMATE
SITE DEVELOPMENT, GOVT. GIRLS HIGH SCHOOL, JAJPUR, ODISHA.
DETAILED ESTIMATE
SL.N AMOUNT
SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS) AMOUNT (RS)
VIII 8.0 FLOORING WORK
Providing and laying Polished Granite stone flooring in required
design and patterns, in linear as well as curvilinear portions of
the building all complete as per the architectural drawings with
18 mm thick stone slab over 20 mm (average) thick base of
cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed
with cement slurry and pointing with white cement slurry
admixed with pigment of matching shade including rubbing ,
curing and polishing etc. all complete as specified and as
directed by the Engineer-in-Charge.
Polished Granite stone slab jet Black, Cherry Red, Elite Brown,
Cat Eye or equivalent.
a Ground Floor sqm 15.00 2575.40 38631.00
Providing and laying at or near ground level factory made kerb
stone of M-25 grade cement concrete in position to the required
line, level and curvature, jointed with cement mortar 1:3 (1
cement: 3 coarse sand), including making joints with or without
grooves (thickness of joints except at sharp curve shall not to
18 MR more than 5mm), including making drainage opening wherever cum 25.32 7123.50 180340.31
required complete etc. as per direction of Engineer-in-charge
(length of finished kerb edging shall be measured for payment).
(Precast C.C. kerb stone shall be approved by Engineer-in-
charge).
Providing and laying factory made chamfered edge Cement
Concrete paver blocks in footpath, parks, lawns, drive ways or
light traffic parking etc, of required strength, thickness & size/
shape, made by table vibratory method using PU mould, laid in
required colour & pattern over 50mm thick compacted bed of
sand, compacting and proper embedding/laying of inter locking
paver blocks into the sand bedding layer through vibratory
compaction by using plate vibrator, filling the joints with sand
and cutting of paver blocks as per required size and pattern,
finishing and sweeping extra sand. complete all as per direction
of Engineer-in-Charge.
16.91.2 80 mm thick C.C. paver block of M-30 grade with
approved color design and pattern.
TOTAL FLOORING WORK 38631.00 2033023.61
IX 9.0 ROOFING WORK
X 10.0 FINISHING WORK
20 SOR 12mm thick cement plaster (1:6) on brick work. sqm 45.00 139.80 6291.00
16mm thick cement plaster (1:6) over brick or stone masonry.
21 SOR sqm 873.00 199.90 174512.70
Providing and applying plaster of paris putty of 2 mm thickness
22 SOR over plastered surface to prepare the surface even and smooth sqm 45.00 244.80 11016.04
complete.
Finishing walls with textured exterior paint of required shade
:New work (Two or more coats applied @ 3.28 ltr/10 sqm) over
23 SOR and including priming coat of exterior primer applied @ sqm 948.00 204.70 194055.60
2.20kg/10 sqm
Painting two coats to the wall surface by using 100% premium
Acrylic emulsion paint to interior wall surface over a coat of
primer with water bond cement primer after preparing the
24 SOR surface smooth by applying putty punning with Synthetic Acrylic sqm 45.00 78.08 3513.63
wall putty including finishing the surface smooth by sand
papering in all heights etc. complete in all respect.
C1 - Page 3 of 4 For Niche Architects
Govt. Girls High School, Jajpur
SITE DEVELOPMENT - CIVIL DETAILED ESTIMATE
SITE DEVELOPMENT, GOVT. GIRLS HIGH SCHOOL, JAJPUR, ODISHA.
DETAILED ESTIMATE
SL.N AMOUNT
SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS) AMOUNT (RS)
Supply and installation of 6mm high pressure laminate with
25x50mm aluminium pipes back framing. Process- Black
exterior base paint on plastered walls, fixing of Aluminium tubes
with cleat plates, fasterners etc all included. Fixing of High
25 MR pressure laminate with standard company recommended sqm 31.35 4885.43 153158.23
pasting and reviting in matching color. HPL shall have
Aluminium skin thickness of minimum 0.25 on both sides with
top coating of 28-30 micron Lumiflon and core of LDPE +
Supply and installation of Vertical plantation system HDPE living
wall trays.
Colour: - Black (PPCP POT), Dimensions: -(4x4 inch). Supply
and installation at wall by fasteners, anchors or welded.Drip
Irrigation System: Supply and installation of Irrigation system in
each wall trays. Lateral Poly Pipe 12mm or 16 mm, Poly and
Cap Connectors, Poly tee(3 Way) Connectors. Poly Elbow
Connectors ,Pressure 4Kg/pressure, Drippers. Water pressure
26 MR sqm 35.64 8482.14 302303.47
for irrigation.
Drainage – 2” drain pipe for drainage at panels bottom.
Soil Media/ Supply and installation of indoor and indoor plants,
soil media (Mixed Bio Wall Soil Media, vermin, micronutrients,
anti-fungal treatment)
Indoor Plants- Pepromia green, Pepromia variegated,
Syngonium varieties, Oxycardium philodendron, Pothos, Ferns,
Chlorophytum, Arelia, Crotons
TOTAL FINISHING WORK 389388.97 455461.70
XI 11.0 GLAZING WORK
XII 12.0 WATER PROOFING WORK
C1 - Page 4 of 4 For Niche Architects
Govt. Girls High School, Jajpur
SITE DEVELOPMENT - PLUMBING DETAILED ESTIMATE
SITE DEVELOPMENT, GOVT. GIRLS HIGH SCHOOL, JAJPUR, ODISHA.
PLUMBING DETAILED ESTIMATE
Amount
S. No. DSR 2021 Description of Item Unit Qty Rate
DSR 2021 NSR
Sanitary Fixtures & CP Brass Fittings
Total C/F to Summary 0
SOIL, WASTE & VENT AND RAIN WATER PIPES AND
FITTINGS
1 4.1 Providing and laying in position cement concrete of specified
grade excluding the cost of centring and shuttering. All work
up to plinth.
4.1.3 1:2:4 ( 1cement : 2 Coarse sand : 4 graded stone aggregate
20 mm nominal size ) Cum 11.25 7365.15 82857.94
2 DSR-12.22 Making khurras 45x45 cm with average minimum thickness
of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4
graded stone aggregate of 20 mm nominal size) over P.V.C.
sheet 1mx1mx400micron, finished with 12mm cement plaster
1:3 (1 cement : 3 coarse sand) and a coat of neat cement,
rounding the edges and making and finishing the outlet
complete. Each 37.5 266.60 9997.50
3.0 DSR-12.44 Providing and fixing to the inlet mouth of rain water pipe cast
iron grating 15 cm diameter and weighing not less than 440
grams. Each 15 47.90 718.50
4 DSR 19.7.2 Inside size 120x90 cm and 90 cm deep including C.I. cover
analysis with frame (medium duty) 500 mm internal diameter, total
weight of cover and frame to be not less than 116 kg (weight
of cover 58 kg and weight of frame 58 kg) :
19.7.2.1 With common burnt clay F.P.S. (non modular) bricks
of class designation 7.5 Each 15 24405.90 366088.50
5 DSR 19.7.3 Inside size 120x90 cm and 90 cm deep including C.I. cover
analysis with frame (heavy duty) 560 mm internal diameter, total
weight of cover and frame to be not less than 208 kg (weight
of cover 108 kg and weight of frame 100 kg) :
19.7.3.1 With common burnt clay F.P.S. (non modular) bricks
of class designation 7.5 Each 8 30197.95 241583.60
6 DSR 19.8 Extra for depth for manholes :
analysis
19.8.2.1 With common burnt clay F.P.S. (non modular)
bricks of class designation 7.5 Each 15 9744.25 146163.75
7 DSR 19.36 Providing and laying Non Pressure NP-4 class (Heavy duty)
analysis R.C.C. pipes including collars/spigot jointed with stiff mixture
of cement mortar in the proportion of 1:2 (1 cement : 2 fine
sand) including testing of joints etc. complete
19.36.1 450 mm dia RCC pipes. m 225 2720.00 612000.00
19.36.2 600 mm dia RCC pipes. m 150 3519.85 527977.50
C3 - Page 1 of 2 For Niche Architects
Govt. Girls High School, Jajpur
SITE DEVELOPMENT - PLUMBING DETAILED ESTIMATE
Amount
S. No. DSR 2021 Description of Item Unit Qty Rate
DSR 2021 NSR
Total C/F to Summary 1904529.35 82857.94
Water Supply System
Total C/F to Summary 0.00
C3 - Page 2 of 2 For Niche Architects
Govt. Girls High School, Jajpur
SITE DEVELOPMENT - ELECTRICAL DETAILED ESTIMATE
SITE DEVELOPMENT, GOVT. GIRLS HIGH SCHOOL, JAJPUR, ODISHA.
BOQ - ELECTRICAL WORKS
S.No DESCRIPTION UNIT QTY 75% Qty RATE AMOUNT
Wiring for light point/ fan point/ exhaust fan point/ call bell point with
1.5 sq.mm FRLS PVC insulated copper conductor single core cable in
surface / recessed medium class PVC conduit,with modular switch,
1 1.8.1 modular plate, suitable GI box and earthing the point with 1.5 sq.mm Point 30.00 22.50 596.49 17,894.70
FRLS PVC insulated copper conductor single core cable etc. as
required. (Group-A)
Wiring for light /power plug with 2 x 4 Sq.mm. FRLS PVC insulated,
copper conductor single core cable in surface / recessed medium
2 1.12 class PVC conduit along with 1 no. 4 Sq.mm FRLS PVC insulated m 1260.00 945.00 171.90 2,16,594.00
copper conductor single core cable for loop earthing as required.
Wiring for circuit / submain wiring alongwith earth wire with the
following sizes of FRLS PVC insulated, copper conductor single core
cable in surface/ recessed medium class PVC conduit as required.
3.1 1.14.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire. m 60.00 45.00 143.54 8,612.40
3.2 1.14.4 2 x 6 sq.mm. + 1 x 6 sq.mm. Earth wire m 324.00 243.00 214.02 69,342.48
3.3 1.14.11 4 x 16 sq.mm. + 2 x 6 sq.mm. Earth wire m 120.00 90.00 646.34 77,560.80
Supply and fixing of following sizes of medium class PVC conduit
along with accessories in surface/recess including cutting the wall and
making good the same in case of recessed conduit as required.
1.31 Supply and fixing of suitable size GI box with modular plate and
cover in front on surface or in recess including providing and fixing 3
pin 5/6 amps modular socket outlet and 5/6 amps. modular switch,
connection etc. as required. Each
1.32 Supply and fixing of suitable size GI box with modular plate and
cover in front on surface or in recess, including providing and fixing 6
pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps. modular
switch, connection etc. as required. Each
DISTRIBUTION BOARDS & MCB's
Supplying and fixing 5 amps. to 32 amps. rating, 240/415 V, 10kA,
"C" curve, miniature circuit breaker (MCB) suitable for inductive
load of following poles in the existing MCB DB complete with
connections, testing and commissioning etc. as required.
2.10.1 single pole Each 108.00 81.00 171.04 18,472.32
Supplying and fixing following way, horizontal type three pole
and neutral, sheet steel, MCB distribution board, 415 V, on
surface/ recess, complete with tinned copper bus bar, neutral
8 bus bar, earth bar, din bar, interconnections, powder painted
including earthing etc. as required. (But without MCB/RCCB/
Isolator)
2.4.3 8 way, Double door Each 3.00 2.25 3954.56 11,863.68
9 Supplying and fixing following rating, four pole, (three phase and
neutral), 415 volts, residual current circuit breaker (RCCB), having a
sensitivity current upto 300 milliamperes in the existing MCB DB
complete with connections, testing and commissioning etc. as
required.
2.15.3 63 amps Each 3.00 2.25 2386.83 7,160.49
1.57 Supplying & fixing suitable size GI box wih modular plate and
cover in front on surface or in recess including providing and
10 fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" EACH 18.00 13.50 549.22 9,885.96
curve including connections, painting etc. as required
C5 - Page 1 of 2 For Niche Architects
Govt. Girls High School, Jajpur
SITE DEVELOPMENT - ELECTRICAL DETAILED ESTIMATE
S.No DESCRIPTION UNIT QTY 75% Qty RATE AMOUNT
LIGHTING FIXTURES & FANS
Supply, installation, testing and commissioning of wall / ceiling / LED
light luminaires with all accessories as per standard item etc complete
as required as per the standard catalogue item.
a Supply, installation, testing and commissioning of Surface mounted
LED downlighter(round shape) with lumen output minimium 1000
lumens, CRI>70,power consumption 10-15W max. , Constant Current
electronic Driver, Color temperature option of 6500K with all Nos. 15.00 11.25 2025.00 30,375.00
accessories as per Luster / Philips as per Interior design.
b Supply, installation, testing and commissioning of LED Based LED
Bulkhead with High Pressure Die Cast Aluminium Body provided with
Polycarbonate cover, System Lumen Package of 600 lm and a
maximum System Wattage of 10 Watts, Ingress Protection Rating of Nos. 15.00 11.25 1665.00 24,975.00
IP66 and IK Rating of IK09, Operating Voltage Range of 120-277V
AC as per Luster / Philips as per Interior design...,
12 Supplying and fixing of GI box of following size modules, alongwith
modular base & cover plate for modular switches in recess etc as
required.
1 or 2 Module (75mmX75mm) No 60.00 45.00 243 14,580.00
13 Supply and drawing of UTP 4 pair Cat 6 LAN cable in the existing
surface/recessed PVC conduit as required.
one run mtrs 187.50 140.63 49 9,187.50
14 Supply & fixing of Faceplate for Flush / Surface Mount Information
Outlets Single Aperture with screw hole covers & Icon Tree Size
86mmX86mm
a Single Aperture no 37.50 28.13 250 9,375.00
b Telephone socket outlet No 2.00 1.50 105 210.00
Supplying and drawing following pair 0.5 mm dia FRLS PVCinsulated
annealed copper conductor, unarmored telephone cable in the
15 existing surface/ recessed steel/ PVC conduit asrequired
a 2 Pair mtrs 75 56.25 18 1,350.00
Supply, installation, testing & commissioning of 6-10w LED Spot/
Spike light, Having minimum IP-65 and Efficacy minimum 90 Lm/W,
LM6 high pressure die cast aluminium housing, Glass cover mounting
16 on Spike, clip and surface as requiredwith complete accessories.(CAT No 38 28.13 1848.00 69,300.00
REF : Philips - LED Spot / Kaselec or eq)
Supply, installation, testing & commissioning of 15-20w LED Uplite
light, Having minimum IP-66 and Efficacy minimum 90 Lm/W, LM6
17 high pressure die cast aluminium housing, Glass cover mounting on No 6 4.50 2567.00 15,402.00
floor recessed as required with complete accessories.(CAT REF :
Philips - uplight / Kaselec or eq)
Supply, installation, testing & commissioning of Dual 5-10w LED UP
& Down light, Having minimum IP-54 and Efficacy minimum 90
18 Lm/W, LM6 high pressure die cast aluminium housing, Glass cover No 75 56.25 2259.00 1,69,425.00
mounting on floor recessed as required with complete accessories as
per Phillips / Kaselec or EQ..
Supply, installation, testing & commissioning of 20-25w LED Bollard
light including 1 to 1.2 mter pole, Having minimum IP-54 and Efficacy
minimum 90 Lm/W, LM6 high pressure die cast aluminium housing,
19 Glass cover mounting on floor recessed as required with complete No 15 11.25 2875.00 43,125.00
accessories as per Philips / Kaselec or EQ.
TOTAL carried forward to Summary 840512.8
C5 - Page 2 of 2 For Niche Architects
SITE DEVELOPMENT, GOVT. GIRLS HIGH SCHOOL, JAJPUR, ODISHA.
BOQ - Play Area
SI.No. Description Unit Quantity Rate Amount
1 Supplying. Installation. Testing and Commissioning of
Following Children's Play Equipment as per mentioned
Product details from Flora Fountains and Amusements or
approved Equivalent with Body of FRP and Structure of Gl of
specified Dia size and wall thickness not less than 2.0mm,
etc. complete as per Technical Datasheet. Indian Standard
Code and as Directed By Engineer-in-charge or Project
Architect.
Name of the Equipment & Model Number
SPRING RIDER- FKR-01 No. 2 15443.12 30886.24
DELUXE SPRING RIDER-FKR-03 No. 0 21110.32 0
ROCKING BOAT- FKR-06 No. 0 15443.12 0
THREE-IN-ONE
(SEA-SAW-01, SWING-01, SLIDE-01) FKR-07 No. 0 96342.40 0
SPRING SEAS. (FOUR-SEATER)-FSS-05 No. 1 42362.32 42362.32
ARCH SWING-FSW-01 No. 1 51004.80 51004.8
MERRY-GO-ROUND PLATFORM)-FMGR-03 No. 1 63756.00 63756
FRP SPIRAL SLIDE-FFS-03 No. 0 140263.20 0
ROTO CURVE SLIDE-FRS-03 No. 0 106260.00 0
STRAIGHT NET CLIMBER- FSC-12 No. 1 52421.60 52421.6
TRAMPOLIN AREA: 10 Dis-ESC-30 No. 0 97759.20 0
Multi-Purpose Play Unit, Area-13 mtr X 9 mtr.
2 Consists of: - FMPU-02
1. Square Deck-7 ht with FRP roof-01 no
2. Square Deck-5 ht with FRP roof-04 no
3. Square Deck-3' ht with FRP roof-01 no
4. Suspension Bridge-8' long- 02no
5. Hanging Bridge-8' long-01 no
6. FRP Tunnel-6" long-02 no
7. Spiral Slide-7'ht. -01 no
8. Step Ladder: -02 no
9. Fire Man pole: - 01 no
10. Ship Ladder: - 01 no
11. Zebra Climber-5`ht.: - 01 no
12. Plain Slide-5` ht.: -01 no
13. Handi Hold: - 01 no
14. Wave Slide-8` ht.: -01 no 15. Bowl Slide-3° ht: -01 no No. 1 977592.00 977592
Total 1218022.96
3 HORTICULTURE/Plantation Work :
Supply & Plantation work, as per approved GFC drawings in
all respect (Considered lumpsum amount, But item wise/ 450000.00 4,50,000.00
Plantation wise items to be finalized as per approved final
drawings paid to Agency accordingly. L.S.
Govt. Girls High School, Jajpur
BLOCK A - ABSTRACT OF COST
CONSTRUCTION OF A BLOCK (COLLEGE), GOVT. GIRLS HIGH SCHOOL, JAJPUR,
ODISHA.
ABSTRACT OF COST
SL.N NON-SOR TOTAL AMOUNT
SL.N NON-SOR TOTAL AMOUNT
DESCRIPTION OF WORK SOR AMOUNT (Rs.)
O. AMOUNT (Rs.) (RS)
A CIVIL WORK :
I EARTH WORK 9,73,838.94 - 9,73,838.94
II CONCRETE WORK 8,93,343.78 - 8,93,343.78
III REINFORCED CEMENT CONCRETE WORK 1,30,65,103.61 - 1,30,65,103.61
IV BRICK WORK 19,19,173.27 - 19,19,173.27
V MARBLE & GRANITE WORK 39,850.04 - 39,850.04
VI WOOD AND P.V.C. WORK 15,64,562.70 3,96,719.10 19,61,281.80
VII STEEL WORK - 4,86,350.54 4,86,350.54
VIII FLOORING WORK 20,09,340.01 7,26,202.50 27,35,542.51
IX ROOFING WORK 97,683.27 - 97,683.27
X FINISHING WORK 21,29,417.40 - 21,29,417.40
XI GLAZING WORK 1,82,167.04 1,82,167.04
XII WATER PROOFING WORK 6,65,622.73 - 6,65,622.73
TOTAL (A) 2,35,40,102.78 16,09,272.14 2,51,49,374.92
B PLUMBING WORK :
I SANITARY FIXTURES & CP BRASS FITTINGS 2,26,481.34 2,26,481.34
II SOIL, WASTE, VENT & RAIN WATER PIPES 2,29,921.56 2,29,921.56
III WATER SUPPLY SYSTEM 1,72,711.74 1,72,711.74
IV RAIN WATER HARVESTING 52,282.88 52,282.88
TOTAL (B) - 6,81,398.00 6,81,398.00
C ELECTRICAL WORKS:
I INTERNAL ELECTRICAL WORKS 28,52,678.81 28,52,678.81
II 10 PASSENGER LIFT 14,37,500.00 14,37,500.00
III SOLAR POWER PLANT 10KW 3,67,367.00 3,67,367.00
IV MAIN LT PANEL 2,67,848.00 2,67,848.00
TOTAL (C) - 49,25,393.81 49,25,393.81
D HVAC WORKS 7,17,345.00 7,17,345.00
TOTAL (D) 7,17,345.00 7,17,345.00
E FURNISHING WORKS
I INTERIOR FUNRNITURE 82,66,315.00 82,66,315.00
II BLINDS AND SHADES 11,54,597.78 11,54,597.78
TOTAL (E) 94,20,912.78 94,20,912.78
E TOTAL [A+B+C+D+E] = [F] 4,08,94,424.51
2.0 ADD GST @ 18% ON [G] 73,60,996.41
TOTAL 4,82,55,420.92
Govt. Girls High School, Jajpur
BLOCK A - CIVIL DETAILED ESTIMATE
CONSTRUCTION OF A BLOCK (COLLEGE), GOVT. GIRLS HIGH SCHOOL, JAJPUR, ODISHA.
DETAILED ESTIMATE
SL. SOR NON-SOR
SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS)
NO. AMOUNT (RS) AMOUNT (RS)
I 1.0 EARTH WORK
Earth work in ordinary soil with initial lead and lift including
rough dressing in layers not exceeding 0.3m in depth and the
1 SOR cum 182.47 143.96 26269.14
Earth transported by transport vehicles as directed by the
Engineer-in-charge.
Extra lift or 1.5m or part there of over the initial lift of 1.5m in all
2 SOR kinds of embankments and road works and ordinary earth work
in general.
a) 1st Extra lift of 1.5m (up to 7.5m) cum 41.31 15.37 634.97
Single under reamed pile foundation with RCC M25 using
12mm size black hard granite crusher broken chips including
3 SOR cost of borring but excluding cost of M.S./Tor steel and labour
charges for cutting, bending and binding of steel.
a 600mm dia and 6.0M long. each 49.50 12323.80 610028.10
i) For each additional depth of 0.5m beyond initial depth of
b each 297.00 780.50 231808.50
6.0m add extra to the rate
Filling in foundation and plinth with excavated materials
4 SOR including watering and ramming as directed by the Engineer-in- cum 115.53 80.00 9242.69
charge of earth work.
5 SOR Transportation of earth from site upto 15km cum 66.94 237.67 15909.44
Filling in foundation and plinth with filling sand, watered and
rammed including cost of material, labour, royality and
6 SOR cum 99.00 361.90 35828.10
transportation etc. complete as per specifications and as
directed by Engineer-in-charge.
Supplying chemical emulsion in sealed containers including
delivery as specified.
Chlorpyriphos/ Lindane emulsifiable concentrate of 20% litre 7.20 172.50 1242.00
Diluting and injecting chemical emulsion for POST-
8 SOR CONSTRUCTIONAL anti-termite treatment (excluding the cost
of chemical emulsion) :
Treatment of soil under existing floors using chemical emulsion
@ one litre per hole, 300 mm apart including drilling 12 mm
diameter holes and plugging with cement mortar 1 :2 (1 cement
: 2 Coarse sand) to match the existing floor:
With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
TOTAL EARTH WORK 973838.94 0.00
II 2.0 CONCRETE WORK
C.C (1:3:6) with 25mm to 40mm size crrusher broken metal
including all cost, conveyance,royalty & taxes etc.comp.to work
9 SOR cum 18.59 4632.10 86103.21
site as per specification approved by the department &
direction of E.I.C
Cement concrete (1:2:4) with 12mm size hard broken granite
chips.
a 1st floor cum 106.55 6087.00 648585.07
C.C (1:4:8) with 25mm to 40mm size crrusher broken metal
including all cost, conveyance,royalty & taxes etc.comp.to work
11 SOR cum 37.18 4267.60 158655.50
site as per specification approved by the department &
direction of E.I.C
TOTAL CONCRETE WORK 893343.78 0.00
III 3.0 REINFORCED CEMENT CONCRETE WORK
Providing M.S. reinforcement for R.C.C. work including cutting,
12 SOR bending, binding and tying the grills and placing in position Qtl. 875.89 7841.20 6867991.61
including cost of binding wire 18 to 20 gauge.
Providing, hoisting laying of Reinforced Cement concrete of
Grade M-25 including all material & labour charges and also
13 SOR including shuttering and centring but excluding reinforcement
etc. complete as per specifications and as directed by Engineer-
in-Charge of the project.
a Footings cum 67.07 5318.70 356714.57
b Column pedestals cum 0.00 11099.90 0.00
c Columns below plinth cum 6.93 11099.90 76891.09
d Grade slab under floor on plinth lvl. cum 36.00 9481.20 341323.20
e Plinth beam cum 11.35 5674.50 64395.69
A1 - Page 1 of 9 For Niche Architects
Govt. Girls High School, Jajpur
BLOCK A - CIVIL DETAILED ESTIMATE
CONSTRUCTION OF A BLOCK (COLLEGE), GOVT. GIRLS HIGH SCHOOL, JAJPUR, ODISHA.
DETAILED ESTIMATE
SL. SOR NON-SOR
SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS)
NO. AMOUNT (RS) AMOUNT (RS)
f Columns above plinth cum 61.94 11099.90 687518.09
h Slab beam cum 92.40 11099.90 1025619.11
i Roof Slab
Ground floor cum 75.17 9481.20 783990.51
First floor cum 63.00 10430.00 728544.60
Second floor cum 63.00 11564.20 813985.20
Third floor (Mumty) cum 7.61 12920.40 81054.09
j S/C flight cum 21.26 10647.50 226392.47
k Classroom steps cum 48.19 10647.50 513135.20
l Lintels on doors & windows cum 4.25 8864.80 37686.59
m Wash basine counters sqm 5.21 810.50 4225.04
n Chajjas sqm 48.60 810.50 39390.30
o Elevation works cum 37.50 11099.90 416246.25
TOTAL REINFORCED CEMENT CONCRETE WORK 13065103.61 0.00
IV 4.0 BRICK WORK
Brick work withFly ash bricks 25 cm x 12 cmx8cm size having
crushing strength not less than 75 Kg/cm2 with dimensional
14 SOR cum 33.45 4197.50 140405.66
tolerance +8 percent in cement mortar (1:6) in foundation.
Brick work withFly ash bricks 25 cm x 12 cmx8cm size having
crushing strength not less than 75 Kg/cm2 with dimensional
15 SOR cum 143.95 4235.50 609680.90
tolerance +8 percent in cement mortar (1:6) in Super Structure
Providing and laying autoclaved aerated cement blocks
masonry with 150mm/230mm/300 mm thick AAC blocks in
super structure above plinth level up to floor V level with RCC
band at sill level and lintel level with approved block laying
polymer modified adhesive mortar all complete as per direction
of Engineer-in-Charge. (The payment of RCC band and
reinforcement shall be made for seperately).
a Ground Floor cum 82.21 4764.80 391733.89
b First Floor cum 77.04 4954.30 381677.53
c Second floor cum 79.87 4954.30 395675.29
TOTAL BRICK WORK 1919173.27 0.00
V 5.0 MARBLE & GRANITE WORK
Providing and fixing 18 mm thick gang saw cut, mirror polished,
premoulded and prepolished, machine cut for kitchen
platforms, vanity counters, window sills, facias and similar
locations of required size, approved shade, colour and texture
16 SOR laid over 20 mm thick base cement mortar 1:4 (1 cement : 4
coarse sand), joints treated with white cement, mixed with
matching pigment, epoxy touch ups, including rubbing, curing,
moulding and polishing to edges to give high gloss finish etc.
complete at all levels.
Granite of any colour and shade
Area of slab over 0.50 sqm sqm 4.05 2837.60 11492.28
Providing edge moulding to 18 mm thick marble stone
counters, Vanities etc., including machine polishing to edge to
give high gloss finish etc. complete as per design approved by
Engineer-in-Charge.
Granite work metre 6.75 295.00 1991.25
Extra for fixing marble /granite stone, over and above
corresponding basic item, in facia and drops of width upto 150
18 SOR metre 6.75 253.60 1711.80
mm with epoxy resin based adhesive, including cleaning etc.
complete.
Extra for providing opening of required size & shape for wash
basin/ kitchen sink in kitchen platform, vanity counter and
similar location in marble/ Granite/ stone work, including
19 SOR each 2.25 404.10 909.23
necessary holes for pillar taps etc. including moulding, rubbing
and polishing of cut edges etc. complete.
A1 - Page 2 of 9 For Niche Architects
Govt. Girls High School, Jajpur
BLOCK A - CIVIL DETAILED ESTIMATE
CONSTRUCTION OF A BLOCK (COLLEGE), GOVT. GIRLS HIGH SCHOOL, JAJPUR, ODISHA.
DETAILED ESTIMATE
SL. SOR NON-SOR
SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS)
NO. AMOUNT (RS) AMOUNT (RS)
Fixing tiles/Marbles in dados skirting and risers of step on
12mm thick cement plaster (1:3) jointed with neat cement slurry
mixed with pigment to match the shades of the tiles etc.
complete.
Vitrified Tile 600mmx600mm Coloured / Printed series
a Ground Floor sqm 24.94 952.20 23745.49
TOTAL MARBLE & GRANITE WORK 39850.04 0.00
VI 6.0 WOOD AND P.V.C. WORK
Providing and fixing factory made single extruded WPC (Wood
Polymer Composite) solid door/window/Ceosetory window s
& other Frames/Chowkhat comprising of virgin PVC polymer of
K value 58-60 (Suspension Grade), calcium carbonate and
natural fibers (wood powder/ rice husk/wheat husk) and non
tox ic additives (maximum toxicity index of 12 for 100 gms)
fabricated with miter jo ints after applying PVC solvent cement
and screwed with full body threaded star headed SS screws
having minimum f rame density of 750 kg/cum, screw
withdrawal strength of 2200 N (Face) & 1100 N (Edge) ,
minimum compressive strength of 58 N/mm2, modulus of
21 SOR elast icity 900 N/mm2 and resistance to spread of flame of
Class A category with property of being termite/borer proof,
water/moisture proof and fire retardant and fixed in position
with M.S hold fast/lugs/SS dash fa steners of required dia and
length complete as per direction of Engineer-In - Charge . (M.S
hold fast/lugs or SS dash fasteners shall be paid for separate
Note: For WPC solid door/window frames , minus 5mm
tolerance in dimensions i.e. depth and width of profile shall be
acceptable . Variation in profile dimensions on plus side shall
be acceptab le but no extra payment on this account shall be
Supplying, fitting and fixing well dressed and well seasoned sal
wood choukaths framed and fixed including two coats coats of
coaltaring to wall and lintel side faces of choukaths including
cost of coaltar and labour for coaltaring and fixing required nos.
of W.I. clamps to the choukaths with approved qualities of
screws including cost, conveyance, loading required for the metre 105.68 1286.90 135993.16
work etc. complete in all respect with cost, conveyance,
royalties, loading, unloading and taxes of all materials and cost
of all labour, T&P, sundries, scaffolding etc. required for the
work complete in all respect as per specification and direction
of Engineer in Charge
Providing and fixing ISI marked flush door shutters conforming to IS :
2202 (Part I) non-decorative type, core of block board construction with
22 SOR frame of 1st class hard wood and well matched commercial 3 ply
veneering with vertical grains or cross bands and face veneers on both
faces of shutters:
35 mm thick including ISI marked Stainless Steel butt hinges with
necessary screws
Extra for providing lipping with 2nd class teak wood battens 25
23 SOR mm minimum depth on all edges of flush door shutters (over all sqm 54.90 345.00 18940.50
area of door shutter to be measured).
Providing and fixing wooden moulded beading to door and
24 SOR window frames with iron screws, plugs and priming coat on
unexposed surface etc. complete :
2nd class teak wood
50 x 20 mm metre 105.68 169.66 17928.82
Providing 40x5 mm flat iron hold fast 40 cm long including fixing
to frame with 10 mm diameter bolts, nuts and wooden plugs
25 SOR and embedding in cement concrete block 30x10x15cm 1:3:6 each 103.50 112.50 11643.75
mix (1 cement : 3 coarse sand : 6 graded stone aggregate
20mm nominal size).
Door Hardware
26 MR SS Tower Bolt 12'' each 10.50 679.00 7129.50
dormakaba BB 4330, 5 Knuckle, 2 Ball bearing butt hinges size
27 MR 4" x 3" x 3mm, in SS 304 and in SSS finish. Suitable for door each 111.00 312.00 34632.00
weights upto 120kgs. Template Drilled
A1 - Page 3 of 9 For Niche Architects
Govt. Girls High School, Jajpur
BLOCK A - CIVIL DETAILED ESTIMATE
CONSTRUCTION OF A BLOCK (COLLEGE), GOVT. GIRLS HIGH SCHOOL, JAJPUR, ODISHA.
DETAILED ESTIMATE
SL. SOR NON-SOR
SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS)
NO. AMOUNT (RS) AMOUNT (RS)
dormakabakaba ML 550S Digital Mortise lock in standard
design accessible by Fingerprint (100 nos.), RFID (100 Nos.),
PIN (4 Nos.), BLE (10 mobiles), Mechanical Keys (3 nos.).
28 MR each 0.00 41861.00 0.00
Emergency Power: external 9VDC alkaline battery. Mortise lock
in Black with Bright Chrome Rim finish. Remote Control
(optional)
dormakaba floor stop half dome with 45mm dia with fixing
29 MR each 27.75 232.00 6438.00
accessories, in satin Chrome
Providing and fixing aluminium die cast body tubular type
universal hydraulic door closer (having brand logo with ISI, IS :
30 SOR 3564, embossed on the body, door weight upto 35 kg and door each 0.00 832.30 0.00
width upto 700 mm), with necessary accessories and screws
etc. complete.
Providing & Fixing decorative high pressure laminated sheet of
plain / wood grain in gloss / matt/ suede finish with high density
31 SOR protective surface layer and reverse side of adhesive bonding
quality conforming to IS : 2046 Type S, including cost of
adhesive of approved quality.
1.0 mm thick sqm 109.80 693.36 76130.93
Providing and fixing factory made uPVC white colour fixed
glazed windows/ventilators comprising of uPVC multi-
chambered frame and mullion (where ever required) extruded
profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized
mild steel section made from roll forming process of required
length (shape & size according to uPVC profile), uPVC
extruded glazing beads of appropriate dimension, EPDM
gasket, G.I fasteners 100 x 8 mm size for fixing frame to
finished wall, plastic packers, plastic caps and necessary
stainless steel screws etc. Profile of frame shall be mitred cut
and fusion welded at all corners, mullion (if required) shall be
also fusion welded including drilling of holes for fixing
32 SOR hardware's and drainage of water etc. After fixing frame the gap
between frame and adjacent finished wall shall be filled with
weather proof silicon sealant over backer rod of required size
and of approved quality, all complete as per approved drawing
& direction of Engineer-in-Charge. (Single / double glass panes
and silicon sealant shall be paid separately).
Note: For uPVC frame, sash and mullion extruded profiles
minus 5% tolerance in dimension i.e. in depth & width of profile
shall be acceptable. Variation in profile dimension in higher
side shall be accepted but no extra payment on this account
shall be made.
Fixed window / ventilator made of (small series) frame 47 x 50
mm & mullion 47 x 68 mm both having wall thickness of 1.9 ±
0.2 mm and single glazing bead of appropriate dimension.
(Area upto 0.75 sqm.)
A1 - Page 4 of 9 For Niche Architects
Govt. Girls High School, Jajpur
BLOCK A - CIVIL DETAILED ESTIMATE
CONSTRUCTION OF A BLOCK (COLLEGE), GOVT. GIRLS HIGH SCHOOL, JAJPUR, ODISHA.
DETAILED ESTIMATE
SL. SOR NON-SOR
SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS)
NO. AMOUNT (RS) AMOUNT (RS)
Providing and fixing factory made uPVC white colour sliding
glazed window upto 1.50 m in height dimension comprising of
uPVC multi-chambered frame with in-built roller track and sash
extruded profiles duly reinforced with 1.60 ± 0.2 mm thick
galvanized mild steel section made from roll forming process of
required length (shape & size according to uPVC profile),
appropriate dimension of uPVC extruded glazing beads and
uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy
(white powder coated) touch locks with hook, zinc alloy body
with single nylon rollers (weight bearing capacity to be 40 kg),
G.I fasteners 100 x 8 mm size for fixing frame to finished wall
and necessary stainless steel screws etc. Profile of frame &
sash shall be mitred cut and fusion welded at all corners,
DSR including drilling of holes for fixing hardware's and drainage of
Analysis water etc. After fixing frame the gap between frame and
adjacent finished wall shall be filled with weather proof silicon
sealent over backer rod of required size and of approved
quality, all complete as per approved drawing & direction of
Engineer-in-Charge. (Single / double glass panes, wire mesh
and silicon sealent shall be paid separately)
Note: For uPVC frame and sash extruded profiles minus 5%
tolerance in dimension i.e. in depth & width of profile shall be
acceptable. Variation in profile dimension in higher side shall
be accepted but no extra payment on this account shall be
Three track three panels sliding window with fly proof SS wire
mesh (Two nos. glazed & one no. wire mesh panels) made of
(small series) frame 92 x 44 mm & sash 32 x 60 mm both
having wall thickness of 1.9 ± 0.2 mm and single glazing bead
of appropriate dimension (Area of window upto 1.75 sqm).
Structure glaze Series with Door and Window
Providing and fixing flat face structure glaze aluminum section
as per JIS A4706 AND JIS A4702 of 60x100/200mm, door
profile size top and bottom 40x100mm and window section size
should be 40x 80mm, extruded aluminum sections should be
made from Grade 6063-T5 , & Anodized with Texguard coating
.All profiles should be Non insulated Profiles. All other major
Accessories should be manufactured by the same
manufacturer.
4.1 Hardware should be as per approved makes and same
DSR manufacturer of the system.
Analysis All materials which are used in should be corrosion-resistant
so that the good functioning in different environments and that
there are no negative influences either on the aluminum or on
the surface treatment.
The system should allow the application of glazing or panels
with thickness up to 12 mm .The external perimeter of
aluminum sections should be Anodized with Texguard coating
Marion face 60mm, Wind pressure:- 1600 Pa, Water tightness:-
500 Pa, Air tightness A-4. Both Frame and Casement should
be made in Thailand. Approved make: Tostem or equivalent
A1 - Page 5 of 9 For Niche Architects
Govt. Girls High School, Jajpur
BLOCK A - CIVIL DETAILED ESTIMATE
CONSTRUCTION OF A BLOCK (COLLEGE), GOVT. GIRLS HIGH SCHOOL, JAJPUR, ODISHA.
DETAILED ESTIMATE
SL. SOR NON-SOR
SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS)
NO. AMOUNT (RS) AMOUNT (RS)
Modular Kitchen:-
Providing and fixing both sides of laminate finish kitchen
cabinet with shelf in 18 mm HDHMR E1 Grade pre laminate
with 22mm HMR MDF E1 Grade PVC Membrane finish shutter
with Majestic profile & tony handles. All ends should have
35 MR edge banding tape of M/s Rehau / Dolkin 0.8mm thickness for sqm 3.96 88010.00 348519.60
cabinet. Back Panel pre laminated 5mm HDHMR. Carcass to
be supplied in knock down condition with pre factory drill for
mini fix, dowels, Shelf with shelf supports and drawer and
100mm adjustable legs & hettich fitting with Majestic handles
TOTAL WOOD AND P.V.C. WORK 1564562.70 396719.10
VII 7.0 STEEL WORK
Steel work in built up tubular/built up sections/ framed work,
(round, square or rectangular hollow tubes etc.) trusses etc.,
including chequered plates, cutting, hoisting, fixing in position
and applying a priming coat of approved steel primer, including
welding and bolted with special shaped washers etc. complete.
Electric resistance or induction butt welded tubes kg 1583.25 109.30 173049.23
Providing and fixing 10 mm plain toughened glass SS railing
with wooden top handrail 40 mm X 40 mm, of CP2 sagwan
wood including PU polish in mat finish and bottom 80 mm X 40
37 MR rmt 20.52 13956.40 286437.66
mmaluminium profile of wooden color powder coating all
complete, under the supervision of Engineer-in-Charge.
Providing & fixing fly proof wire gauze to windows, clerestory
38 MR windows & doors with M.S. Flat 15x3 mm and nuts & bolts
complete.
Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and
1.4 mm aperture on both sides
TOTAL STEEL WORK 0.00 486350.54
VIII 8.0 FLOORING WORK
Providing and fixing machine cut, mirror/ eggshell polished ,
Marble stone work for wall lining (veneer work) including dado,
skirting, risers of steps etc., in required design and pattern (if
required with marble stone slab pieces of different shapes,
sizes & texture but of even thickness) on 12 mm (average)
39 MR thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and
jointed with white cement slurry @ 3.3 kg/sqm including
pointing with white cement slurry admixed with pigment of
matching shade, including rubbing, curing, polishing etc. all
complete as per Architectural drawings, and as directed by the
Engineer-in-Charge.
18 mm thick Italian Marble stone slab,Perlato, Rosso erona,
Fire Red or Dark Emperadore etc.
Providing and laying machine cut, mirror polished, Italian
Marble stone flooring laid in required pattern in linear portion of
the building all complete as per architectural drawings, with 18
mm thick stone slab laid over 20 mm (average) thick base of
cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed
with white cement slurry @ 4.4 kg/sqm including pointing with
white cement slurry admixed with pigment to match the marble
shade including rubbing, curing and polishing etc. all complete
as specified and as directed by the Engineer-in-Charge.
Polished Granite stone slab colour of Black, Cherry/Ruby Red
or equivalent
A1 - Page 6 of 9 For Niche Architects
Govt. Girls High School, Jajpur
BLOCK A - CIVIL DETAILED ESTIMATE
CONSTRUCTION OF A BLOCK (COLLEGE), GOVT. GIRLS HIGH SCHOOL, JAJPUR, ODISHA.
DETAILED ESTIMATE
SL. SOR NON-SOR
SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS)
NO. AMOUNT (RS) AMOUNT (RS)
Providing and laying Polished Granite stone flooring in required
design and patterns, in linear as well as curvilinear portions of
the building all complete as per the architectural drawings with
18 mm thick stone slab over 20 mm (average) thick base of
cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed
with cement slurry and pointing with white cement slurry
admixed with pigment of matching shade including rubbing ,
curing and polishing etc. all complete as specified and as
directed by the Engineer-in-Charge.
Polished Granite stone slab jet Black, Cherry Red, Elite Brown,
Cat Eye or equivalent.
a Ground Floor sqm 175.86 2575.40 452922.40
b First Floor sqm 0.00 3019.70 0.00
Supplying, fitting ,fixing vitrified tile of ( Printed ) in floors of
size 600mmx600mm of approved make conferming to IS:13755
laid on 20mm thick cement mortar (1:4) (1 cement:4 sand) and
42 SOR filling joints with white cement of approved quality including
cost of all materials,labour T&P etc required for the work all
complete as per the direction of Engineer-in-charge.
a Ground Floor sqm 387.19 931.50 360669.36
b First Floor sqm 400.90 941.50 377444.71
c Second Floor sqm 381.20 941.50 358904.11
d Terrace sqm 443.85 941.50 417884.78
Fixing tiles/Marbles in dados skirting and risers of step on
12mm thick cement plaster (1:3) jointed with neat cement slurry
mixed with pigment to match the shades of the tiles etc.
complete.
Granite tiles (above 0.40 Sqm. 20mm thick.)
a Ground Floor sqm 17.59 2360.60 41514.66
b First Floor sqm 0.00 2391.60 0.00
TOTAL FLOORING WORK 2009340.01 726202.50
IX 9.0 ROOFING WORK
Providing and fixing false ceiling at all height including
providing and fixing of frame work made of special sections,
power pressed from M.S. sheets and galvanized with zinc
coating of 120 gms/sqm (both side inclusive) as per IS : 277
and consisting of angle cleats of size 25 mm wide x 1.6 mm
thick with flanges of 27 mm and 37mm, at 1200 mm centre to
centre, one flange fixed to the ceiling with dash fastener 12.5
mm dia x 50mm long with 6mm dia bolts, other flange of cleat
fixed to the angle hangers of 25x10x0.50 mm of required length
with nuts & bolts of required size and other end of angle hanger
fixed with intermediate G.I. channels 45x15x0.9 mm running at
the spacing of 1200 mm centre to centre, to which the ceiling
section 0.5 mm thick bottom wedge of 80 mm with tapered
flanges of 26 mm each having lips of 10.5 mm, at 450 mm
44 SOR centre to centre, shall be fixed in a direction perpendicular to
G.I. intermediate channel with connecting clips made out of
2.64 mm dia x 230 mm long G.I. wire at every junction,
including fixing perimeter channels 0.5 mm thick 27 mm high
having flanges of 20 mm and 30 mm long, the perimeter of
ceiling fixed to wall/partition with the help of rawl plugs at 450
mm centre, with 25mm long dry wall screws @ 230 mm
interval, including fixing of gypsum board to ceiling section and
perimeter channel with the help of dry wall screws of size 3.5 x
25 mm at 230 mm c/c, including jointing and finishing to a flush
finish of tapered and square edges of the board with
recommended jointing compound , jointing tapes , finishing with
jointing compound in 3 layers covering upto 150 mm on both
sides of joint and two coats of primer suitable for board, all as
per manufacturer's specification and also including the cost of
12.5 mm thick tapered edge Glass Reinforced Gypsum (GRG)
board conforming to IS: 2095- (Part 3) : 1996 (Board with BIS sqm 102.41 879.30 90052.47
certification marks)
A1 - Page 7 of 9 For Niche Architects
Govt. Girls High School, Jajpur
BLOCK A - CIVIL DETAILED ESTIMATE
CONSTRUCTION OF A BLOCK (COLLEGE), GOVT. GIRLS HIGH SCHOOL, JAJPUR, ODISHA.
DETAILED ESTIMATE
SL. SOR NON-SOR
SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS)
NO. AMOUNT (RS) AMOUNT (RS)
Providing and fixing tiled false ceiling of specified materials of
size 595x595 mm in true horizontal level, suspended on inter
locking metal grid of hot dipped galvanized steel sections (
galvanized @ 120 grams/ sqm, both side inclusive) consisting
of main "T" runner with suitably spaced joints to get required
length and of size 24x38 mm made from 0.30 mm thick
(minimum) sheet, spaced at 1200 mm center to center and
cross "T" of size 24x25 mm made of 0.30 mm thick (minimum)
sheet, 1200 mm long spaced between main "T" at 600 mm
center to center to form a grid of 1200x600 mm and secondary
cross "T" of length 600 mm and size 24x25 mm made of 0.30
mm thick (minimum) sheet to be interlocked at middle of the
1200x600 mm panel to form grids of 600x600 mm and wall
angle of size 24x24x0.3 mm and laying false ceiling tiles of
45 SOR approved texture in the grid including, required cutting/making,
opening for services like diffusers, grills, light fittings, fixtures,
smoke detectors etc. Main "T" runners to be suspended from
including fixing perimeter channels 0.5 mm thick 27 mm high
having flanges of 20 mm and 30 mm long, the perimeter of
ceiling fixed to wall/partition with the help of rawl plugs at 450
mm centre, with 25mm long dry wall screws @ 230 mm
interval, including fixing of gypsum board to ceiling section and
perimeter channel with the help of dry wall screws of size 3.5 x
25 mm at 230 mm c/c, including jointing and finishing to a flush
finish of tapered and
GI Metal Ceiling Lay in perforated Tegular edge global white
color tiles of size 595x595 mm and 0.5 mm thick with 8 mm
drop; made of GI sheet having galvanizing of 100 gms/sqm
(both sides inclusive) and 20% perforation area with 1.8 mm
dia holes and having NRC (Noise Reduction Coefficient ) of sqm 6.00 1271.80 7630.80
0.5, electro statically polyester powder coated of thickness 60
microns (minimum), including factory painted after bending and
perforation, and backed with a black Glass fiber acoustical
fleece.
TOTAL ROOFING WORK 97683.27 0.00
X 10.0 FINISHING WORK
45 SOR 12mm thick cement plaster (1:6) on brick work. sqm 2425.17 139.80 339038.17
16mm thick cement plaster (1:6) over brick or stone masonry.
46 SOR sqm 1259.25 199.90 251724.08
6 mm thick cement plaster (1:4) to R CC surfaces finished
47 SOR smooth including closed deep chiping and slury treatment. Per sqm 990.52 157.00 155511.82
Providing and applying plaster of paris putty of 2 mm thickness
48 SOR over plastered surface to prepare the surface even and smooth sqm 3415.69 244.80 836163.40
complete.
Finishing walls with textured exterior paint of required shade
:New work (Two or more coats applied @ 3.28 ltr/10 sqm) over
49 SOR and including priming coat of exterior primer applied @ sqm 1259.25 204.70 257768.48
2.20kg/10 sqm
Painting 2 coats with any enamel paint on new work over
50 SOR sqm 150.00 136.60 20490.00
primer including cost of paint & primer , labour.
Painting two coats to the wall surface by using 100% premium
Acrylic emulsion paint to interior wall surface over a coat of
primer with water bond cement primer after preparing the
51 SOR surface smooth by applying putty punning with Synthetic Acrylic sqm 3415.69 78.08 266699.22
wall putty including finishing the surface smooth by sand
papering in all heights etc. complete in all respect.
Applying priming coats with primer of approved brand and
manufacture, having low VOC (Volatile Organic Compound )
52 13.85 content. With ready mixed pink or grey primer on wood work sqm 29.06 69.59 2022.24
(hard and soft wood) having VOC content less than 50 grams/
TOTAL FINISHING WORK 2129417.40 0.00
A1 - Page 8 of 9 For Niche Architects
Govt. Girls High School, Jajpur
BLOCK A - CIVIL DETAILED ESTIMATE
CONSTRUCTION OF A BLOCK (COLLEGE), GOVT. GIRLS HIGH SCHOOL, JAJPUR, ODISHA.
DETAILED ESTIMATE
SL. SOR NON-SOR
SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS)
NO. AMOUNT (RS) AMOUNT (RS)
XI 11.0 GLAZING WORK
Providing and fixing glazing in aluminium door, window,
ventilator shutters and partitions etc. with EPDM rubber /
53 SOR neoprene gasket etc. complete as per the architectural
drawings and the directions of engineer-in-charge . (Cost of
aluminium snap beading shall be paid in basic item):
With float glass panes of 4.0 mm thickness (weight not less
than 10 kg/ sqm)
TOTAL ALUMINIUM WORK 182167.04 0.00
XII 12.0 WATER PROOFING WORK
Providing and laying water proofing treatment to vertical and
horizontal surfaces of depressed portions of W.C., kitchen and
the like consisting of:
(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed
with water proofing compound conforming to IS 2645 in
recommended proportions including rounding off junction of
vertical and horizontal surface.
(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3
54 SOR sqm 7.50 702.50 5268.75
coarse sand) mixed with water proofing compound in
recommended proportion including rounding off junction of
vertical and horizontal surface.
(iii) IIIrd course of applying blown or residual bitumen applied
hot at 1.7 kg. per sqm of area.
(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at
joints of PVC sheet should be 100 mm wide and pasted to each
other with bitumen @ 1.7 kg/sqm).
Providing and laying integral cement based water proofing
treatment including preparation of surface as required for
treatment of roofs, balconies, terraces etc consisting of
following operations:
(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of
cement admixed with water proofing compound conforming to
IS. 2645 and approved by Engineer-in-charge over the RCC
slab including adjoining walls upto 300 mm height including
cleaning the surface before treatment.With average thickness
of 120 mm and minimum thickness at khurra as 65 mm.
(b) Laying brick bats with mortar using broken bricks/brick bats
25 mm to 115 mm size with 50% of cement mortar 1:5 (1
cement : 5 coarse sand) admixed with water proofing
compound conforming to IS : 2645 and approved by Engineer-
55 SOR in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 sqm 464.03 1423.10 660353.98
cement :5 coarse sand ) admixed with water proofing
compound conforming to IS : 2645 and approved by Engineer-
in-charge to required slope and treating similarly the adjoining
walls upto 300 mm height including rounding of junctions of
walls and slabs.
(c) After two days of proper curing applying a second coat of
cement slurry using 2.75 kg/ sqm of cement admixed with water
proofing compound conforming to IS : 2645 and approved by
Engineerin- charge.
(d) Finishing the surface with 20 mm thick jointless cement
mortar of mix 1:4 (1 cement :4 coarse sand) admixed with
water proofing compound conforming to IS : 2645 and
approved by Engineerin- charge including laying glass fibre
cloth of approved quality in top layer of plaster and finally
TOTAL WATER PROOFING WORK 665622.73 0.00
A1 - Page 9 of 9 For Niche Architects
Govt. Girls High School, Jajpur
BLOCK A - PLUMBING DETAILED ESTIMATE
CONSTRUCTION OF A BLOCK (COLLEGE), GOVT. GIRLS HIGH SCHOOL, JAJPUR, ODISHA.
BOQ - PLUMBING ITEMS
Amount
S. No. DSR 2021 Description of Item Unit Qty Rate
Sanitary Fixtures & CP Brass Fittings
1.0 17.78. Providing and fixing white vitreous china extended wall
mounting water closet of size of approved shape including
providing & fixing white vitreous china cistern with dual flush
fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/
8 litres), including seat cover, and cistern fittings, nuts, bolts
and gasket etc complete. Each 3 11204.91 33614.73
2.0 MR Providing and fixing in position best indian Health Faucet with
8mm dai 1 meter long Flaxible Tube and wall bracket with N.
R. V. (nonreturn wall). Each 3 2250.00 6750
3.0 DSR-17.7A Providing and fixing wash basin with C.I. brackets, 15 mm dia
CP Brass single hole basin mixer of approved quality and
make, including painting of fittings and brackets, cutting and
making good the walls wherever required:-
3.1 a White Vitreous China Wash basin size 550x400 mm with a
15 mm C.P. brass single hole basin mixer. Each 3 2973.05 8919.15
4.0 17.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen
sink with mat finish as per IS 13983 with C.I. brackets and
stainless steel plug 40 mm including painting of fittings and
brackets, cutting and making good the walls wherever
required :
4.1 17.10.1.3 Kitchen sink with drain board 510x1040 mm, bowl depth
200mm. Each 8 5394.22 43153.76
5 DSR-17.22B Providing and fixing CP Brass Single lever telephonic wall
mixer of quality & make as approved by Engineer in charge.
5.1 (a) 15 mm nominal dia Each 2 5259.41 10518.82
6 17.22A Providing and fixing CP Brass 32mm size Bottle Trap of
approved quality & make and as per the direction of Engineer-
in-charge. Each 8 761.73 6093.84
7 17.34 Providing and fixing toilet paper holder :
17.34.1 C.P. brass Each 2 585.15 1170.3
8 18.22 Providing and fixing C.P. brass shower rose with 15 or 20
mm inlet :
9 18.49 Providing and fixing C.P. brass bib cock of approved quality
conforming to IS:8931 :
9.1 18.49.1 15 mm nominal bore Each 2 373.19 746.38
10 18.51 Providing and fixing C.P. brass long body bib cock of
approved quality conforming to IS standards and weighing
not less than 690 gms.
10.1 18.51.1 15 mm nominal bore Each 7 608.87 4262.09
11 18.53 Providing and fixing C.P. brass angle valve for basin mixer
and geyser points of approved quality conforming to IS:8931
11.1 18.53.1 15 mm nominal bore Each 27 430.05 11611.35
A3 - Page 1 of 5 For Niche Architects
Govt. Girls High School, Jajpur
BLOCK A - PLUMBING DETAILED ESTIMATE
Amount
S. No. DSR 2021 Description of Item Unit Qty Rate
12 DSR-18.53A Providing and fixing C.P. Brass extension nipple (size
15mmx50mm) of approved make and quality as per direction
of Engineer-in-charge. Each 52 53.03 2757.56
13 18.65 Providing and fixing PTMT soap Dish Holder having length of
breadth 102mm, height of 75mm with concealed fitting
arrangements,
weighing not less than 106 gms Each 8 83.16 665.28
14 17.72 Providing and fixing PTMT towel ring trapezoidal shape 215
mm long,200 mm wide with minimum distances of 37 mm
from wall face withconcealed fittings arrangement of
approved quality and colour, weighing not less than 88 gms
15 17.73 Providing and fixing PTMT towel rail complete with brackets
fixed to
wooden cleats with CP brass screws with concealed fittings
arrangement of approved quality and colour
16 17.73.1 450 mm long towel rail with total length of 495 mm, 78 mm
wide and effective height of 88 mm, weighing not less than
170 gms Each 2 493.01 986.02
17 17.71 Providing and fixing PTMT liquid soap container 109 mm
mm high and 112 mm distance from wall of standard shape
bracket of the same materials with snap fittings of approved
quality
and colour, weighing not less than 105 gms. Each 7 125.74 880.18
18 Providing and fixing vertical storage type hot water heater
fixed to wall with anchor bolts & nuts, 15mm CP brass angle
stop cock and 15mm CP brass non-return valve complete
including making connections with 15mm dia CP connecting
pipes on inlet and outlet, suitable length of power cable and
15 amps plug.
18.1 NS-9 Capacity15Litres Venus Model Magma 25GV Each 5 12500.00 62500
19 NS Providing and fixing 15mm C.P brass Sink MixerJaguar
Model. No. FLR-5165 or approvedequivalent.) for kitchen
sink with swinging spout complete. Including cutting and
making good the walls wherever required . Each 7 4500.00 31500
Total C/F to Summary 226481.34
A3 - Page 2 of 5 For Niche Architects
Govt. Girls High School, Jajpur
BLOCK A - PLUMBING DETAILED ESTIMATE
Amount
S. No. DSR 2021 Description of Item Unit Qty Rate
SOIL, WASTE & VENT AND RAIN WATER PIPES AND
FITTINGS
20 4.1 Providing and laying in position cement concrete of specified
grade excluding the cost of centring and shuttering. All work
up to plinth.
20.1 4.1.3 1:2:4 ( 1cement : 2 Coarse sand : 4 graded stone aggregate
20 mm nominal size ) Cum 2 6330.35 12660.7
21 DSR-12.22 Making khurras 45x45 cm with average minimum thickness
of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4
graded stone aggregate of 20 mm nominal size) over P.V.C.
sheet 1mx1mx400micron, finished with 12mm cement plaster
1:3 (1 cement : 3 coarse sand) and a coat of neat cement,
rounding the edges and making and finishing the outlet
complete. Each 6 229.14 1374.84
22.0 DSR-12.44 Providing and fixing to the inlet mouth of rain water pipe cast
iron grating 15 cm diameter and weighing not less than 440
grams. Each 6 41.17 247.02
23.0 NS Providing and fixing 110 mm dia PVC floor trap moulded
EXTENTION PIECE (Height Riser) having 3 nos. boss inlets
suitable for 50 and 40 mm pipe connections, jointing and
dripseal all complete as per standard detail. NOS 8 350.00 2800
24.0 NS Providing and fixing floor drain points formed out of UPVC
110 X 50 mm dia reducer with suitable extension piece
including cost of cutting and making good the walls and
floors wherever required. NOS 8 385.00 3080
25 NS Providing and fixing C.P JALI 125 mm X 125 mm square
vertical grating fixed in wall / floor for tarrace rain water
outlet, complete work. NOS 8 300.00 2400
26 NS Providing, jointing and fixing UPVC Soil, Waste and Vent
pipes of approved make conforming to IS : 13592 Class B, 6
kg/cm2 pressure including fittings and specials, i.e. bends,
tees, crosses, access pieces, adaptors for connections to
other materials, plugs, reducers, cowls, offsets, etc.in pipe
ducts , sunken floors, under slung from ceiling and jointing
with epoxy based sealant-`Dripseal`, Pipes may be laid/
fixed in pipe ducts, sunken floors, under slung from ceiling.
The pipes shall be laid to
26.10 63 mm dia M 30 600.00 18000
26.20 110 mm dia M 240 750.00 180000
27 NS-26 Providing and fixing in position 110x63 mm dia uPVC
reducing elbow including fix to floor with cement mortar. Each 7 151.00 1057
28 NS-27 Providing and fixing 100 mm dia GI inlet fitting/ Extension
Piece with 2 or 3 inlets of 32 to 50 mmdia, fixed to CI trap
with lead joint and set in cement concrete as per drawing
complete. Each 7 906.00 6342
29 NS-28 Providing and fixing in position 125x125 mm stainless steel
grating for floor trap/floor drain including fix to floor with
cement mortar. Each 7 280.00 1960
Total C/F to Summary 229921.56
A3 - Page 3 of 5 For Niche Architects
Govt. Girls High School, Jajpur
BLOCK A - PLUMBING DETAILED ESTIMATE
Amount
S. No. DSR 2021 Description of Item Unit Qty Rate
Water Supply System
30 DSR-18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)
pipes, having thermal stability for hot & cold water supply,
including all CPVC plain & brass threaded fittings, i/c fixing
the pipe with clamps at 1.00 m spacing. This includes jointing
of pipes & fittings with one step CPVC solvent cement and
the cost of cutting chases and making good the same
including testing of joints complete as per direction of
Engineer in Charge
Concealed work including cutting chases and making good
the walls etc.
30.1 18.8.1 15 mm nominal outer dia .Pipes. Metre 45 379.17 17062.65
30.2 18.8.2 20 mm nominal outer dia .Pipes. Metre 183 441.57 80807.31
31 DSR-18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)
pipes, having thermal stability for hot & cold water supply
including all CPVC plain & brass threaded fittings This
includes jointing of pipes & fittings with one step CPVC
solvent cement, trenching, refilling & testing ofjoints complete
as per direction of Engineer in Charge
Internal work - Exposed on wall
31.2 18.9.2 20 mm dia nominal bore Metre 45 236.58 10646.1
32 DSR-18.17 Providing and fixing gun metal gate valve with C.I. wheel of
approved quality (screwed end) :
32.1 18.17.1A 20 mm dia nominal bore Each 2 395.54 791.08
32.2 18.17.1 25 mm dia nominal bore Each 2 427.30 854.6
33 18.48 Providing and placing on terrace (at all floor levels)
polyethylene water
storage tank, IS : 12701 marked, with cover and suitable
locking
arrangement and making necessary holes for inlet, outlet and
overflow
pipes but without fittings and the base support for tank. per litre 7500 8.34 62550.00
Total C/F to Summary 172711.74
RAIN WATER HARVESTING
23.1 Boring/drilling bore well of required dia for casing/ strainer
pipe, by suitable method prescribed in IS: 2800 (part I),
including collecting samples from different strata, preparing
and submitting strata chart/bore log, including hire &
running charges of all equipments, tools, plants &
machineries required for the job, all complete as per
direction of Engineer-in-charge, upto 90 metre depth below
34 ground level.
23.1.1 All types of soil
23.1.1.1 300 mm dia metre 45 440.32 19814.40
23.3 Supplying, assembling, lowering and fixing in vertical
position in bore well, unplasticized PVC medium well casing
(CM) pipe of required dia, conforming to IS: 12818, including
required hire and labour charges, fittings & accessories etc.
all complete, for all depths, as per direction of Engineer -in-
charge.
23.3.1 100 mm nominal size dia metre 45 516.00 23220.00
23.5 Supplying, filling, spreading & leveling stone boulders of size cum 3
range 5 cm to 20 cm, in recharge pit, in the required
thickness, for all leads & lifts, all complete as per direction of
Engineer-in-charge. 1140.17 3420.51
A3 - Page 4 of 5 For Niche Architects
Govt. Girls High School, Jajpur
BLOCK A - PLUMBING DETAILED ESTIMATE
Amount
S. No. DSR 2021 Description of Item Unit Qty Rate
23.7 Supplying, filling, spreading & leveling coarse sand of size cum 3
range 1.5 mm to 2 mm in recharge pit, in required thickness
over gravel layer, for all leads & lifts, all complete as per
direction of Engineer -incharge.
23.9 Providing and fixing factory made precast RCC perforated each 2
drain covers, having concrete of strength not less than M-25,
of size 1000 x 450x50 mm, reinforced with 8 mm dia four
nos longitudinal & 9 nos cross sectional T.M.T. hoop bars,
including providing 50 mm dia perforations @ 100 to 125
mm c/c, including providing edge binding with M.S. flats of
size 50 mm x 1.6 mm complete, all as per direction of
Engineerin-
charge.
23.13 Providing and fixing suitable size threaded mild steel cap or
spot welded plate to the top of bore well housing/ casing
pipe, removable as per requirement, all complete for
borewell of:
23.13.1 100 mm dia each 2 163.00 326.00
Total C/F to Summary 7u3e 52282.88
A3 - Page 5 of 5 For Niche Architects
Govt. Girls High School, Jajpur
BLOCK A - ELECTRICAL DETAILED ESTIMATE
CONSTRUCTION OF A BLOCK (COLLEGE), GOVT. GIRLS HIGH SCHOOL, JAJPUR, ODISHA.
BOQ - ELECTRICAL WORKS
S.No DESCRIPTION UNIT QTY RATE AMOUNT
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5
sq.mm FRLS PVC insulated copper conductor single core cable in
surface / recessed medium class PVC conduit,with modular switch,
1 1.8.1 modular plate, suitable GI box and earthing the point with 1.5 sq.mm Point 564.00 596.49 3,36,420.36
FRLS PVC insulated copper conductor single core cable etc. as
required. (Group-A)
Wiring for light /power plug with 2 x 4 Sq.mm. FRLS PVC insulated,
copper conductor single core cable in surface / recessed medium
2 1.12 class PVC conduit along with 1 no. 4 Sq.mm FRLS PVC insulated m 1822.50 171.90 3,13,287.75
copper conductor single core cable for loop earthing as required.
Wiring for circuit / submain wiring alongwith earth wire with the
following sizes of FRLS PVC insulated, copper conductor single core
cable in surface/ recessed medium class PVC conduit as required.
3.1 1.14.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire. m 1128.00 143.54 1,61,913.12
3.2 1.14.4 2 x 6 sq.mm. + 1 x 6 sq.mm. Earth wire m 324.00 214.02 69,342.48
3.3 1.14.11 4 x 16 sq.mm. + 2 x 6 sq.mm. Earth wire m 120.00 646.34 77,560.80
Supply and fixing of following sizes of medium class PVC conduit along
with accessories in surface/recess including cutting the wall and
making good the same in case of recessed conduit as required.
1.31 Supply and fixing of suitable size GI box with modular plate and
cover in front on surface or in recess including providing and fixing 3
pin 5/6 amps modular socket outlet and 5/6 amps. modular switch,
connection etc. as required. Each
1.32 Supply and fixing of suitable size GI box with modular plate and
cover in front on surface or in recess, including providing and fixing 6
pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps. modular
switch, connection etc. as required. Each
1.25 Supply and fixing two module stepped type electronic fan regulator on
7 the existing modular plate switch box including connections but 121.00 293.95 35,567.95
excluding modular plate etc. as required. Each
DISTRIBUTION BOARDS & MCB's
Supplying and fixing 5 amps. to 32 amps. rating, 240/415 V, 10kA, "C"
curve, miniature circuit breaker (MCB) suitable for inductive load of
following poles in the existing MCB DB complete with
connections, testing and commissioning etc. as required.
2.10.1 single pole Each 108.00 171.04 18,472.32
Supplying and fixing following way, horizontal type three pole
and neutral, sheet steel, MCB distribution board, 415 V, on
surface/ recess, complete with tinned copper bus bar, neutral
9 bus bar, earth bar, din bar, interconnections, powder painted
including earthing etc. as required. (But without MCB/RCCB/
Isolator)
2.4.3 8 way, Double door Each 3.00 3954.56 11,863.68
10 Supplying and fixing following rating, four pole, (three phase and
neutral), 415 volts, residual current circuit breaker (RCCB), having a
sensitivity current upto 300 milliamperes in the existing MCB DB
complete with connections, testing and commissioning etc. as required.
2.15.3 63 amps Each 3.00 2386.83 7,160.49
1.57 Supplying & fixing suitable size GI box wih modular plate and
cover in front on surface or in recess including providing and
11 fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" EACH 18.00 549.22 9,885.96
curve including connections, painting etc. as required
12 5.15 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess
for connections etc. as required.(Make-Obo/ Aps)
13 5.18 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for
loop earthing along with existing surface / recessed conduit / submain
wiring / cable as required. (Make-Obo/ Aps)
A5 - Page 1 of 6 For Niche Architects
Govt. Girls High School, Jajpur
BLOCK A - ELECTRICAL DETAILED ESTIMATE
S.No DESCRIPTION UNIT QTY RATE AMOUNT
14 MR Supply, installation, testing and commissioning of advance
maintenance free Chemical Gel GI Earthing of JK Chem rode copper
of 3mtr long 50mm dia CHEMRODE filled with highly conducting
metallic compounds with the permanent sealings at both the ends with
compressed at the top along with 50 Kgs of RESLOW mixture of
Resistance Lowering Grounding Minerals. The loss on ignition by mass
of the chemical compound shall be less than 22%. The chemical
compound should be tested and certified by any International Nos 3.00 4500.00 13,500.00
accredited and BIS (Bureau of Indian Standards) accredited laboratory.
The chemical earth electrode manufacturer shall be an ISO 9001:2015
& ISO 14001:2015 certified organization. The Earth pit should be
covered with heavy duty polyplastic weather proof chamber. Make-
APS/ JK / OBO
LIGHTING FIXTURES & FANS
Supply, installation, testing and commissioning of wall / ceiling / LED
light luminaires with all accessories as per standard item etc complete
as required as per the standard catalogue item.
a Supply, installation, testing and commissioning of Aluminium, CRC
Sheet base,mild steel arm, SS Finish, Acrylic diffuser, 5W Led Picture
MR Nos. 8.00 1665.00 13,315.80
Light as per Lustre item No. Li-36001-5/ Philips as per Interior design.
b Supply, installation, testing and commissioning of Aluminium, CRC
Sheet base,mild steel arm, SS Finish, Acrylic diffuser, 20W Led Picture
MR Nos. 7.00 3285.00 22,995.00
Light as per Lustre item No. Li-36004-20 / Philips as per Interior
design..
c Supply, installation, testing and commissioning of COB based down
light, Housing made of Cast aluminum, power coated, Acrylic
MR Nos. 54.00 3168.00 1,71,072.00
diffuser.16W Led Down Light as per Lustre item No. Li-14035-16/
Philips as per Interior design..
d Supply, installation, testing and commissioning of Surface mounted
LED downlighter(round shape) with lumen output minimium 1000
lumens, CRI>70,power consumption 10-15W max. , Constant Current
MR electronic Driver, Color temperature option of 6500K with all Nos. 298.50 2025.00 6,04,462.50
accessories as per Luster / Philips as per Interior design.
e Supply, installation, testing and commissioning of LED Based LED
Bulkhead with High Pressure Die Cast Aluminium Body provided with
Polycarbonate cover, System Lumen Package of 600 lm and a
MR maximum System Wattage of 10 Watts, Ingress Protection Rating of Nos. 19.00 1665.00 31,635.00
IP66 and IK Rating of IK09, Operating Voltage Range of 120-277V AC
as per Luster / Philips as per Interior design...,
f Supply, installation, testing and commissioning of Flexible Non
Waterproof. 15W Led Strip (5 meter) Light with driver as per Lustre
MR Nos. 15.00 2565.00 38,475.00
item No. Li-42002-15 / Philips as per Interior design.
g Supply, installation, testing and commissioning of Hanging Light as
per Lustre item No. Li-3424/1 1xGLS/RetrofitCFL/LED E-27,Spun
MR Nos. 19.00 4104.00 77,976.00
Aluminium Housing Top Plate, Make Luster / Philips as per Interior
design.
h Supply installation, testing and commissioning of Wall Light as per
Lustre Item No. Li-3314/1W-1XGLS/Retrofit CFL/LED-B-22 Base &
MR Arm Made of Brass Casting,Span Brass Holder Cap, Glass Diffuser. Nos. 15.00 5850.00 87,750.00
Make Luster / Philips as per Interior design.
Supply, Installation, Testing and Commissioning of AC 230/250 volts,
50 HZ exhaust fan including providing nuts, bolts, mounting frame,
16 Louvers shutters and other accessories etc. Complete as per interior
design
250 mm to 300mm sweep minimum1250 rpm (4-5 star) Nos 10.00 2205.00 22,050.00
A5 - Page 2 of 6 For Niche Architects
Govt. Girls High School, Jajpur
BLOCK A - ELECTRICAL DETAILED ESTIMATE
S.No DESCRIPTION UNIT QTY RATE AMOUNT
Supply, Installation, Testing and Commissioning of 1200 mm sweep,
BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC)
Motor, class of insulation: B, 3-4 nos. blades, 30 cm long down rod, 2
nos. canopies, shackle kit, safety rope, copper winding, Power Factor
not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery
minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD
less than 10%, remote or electronic regulator unit for speed control and
all remaining accessories including safety pin, nut bolts, washers,
17 temperature rise=75 degree C (max.), insulation resistance more than Each 116.00 2925.00 3,39,300.00
2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply,
earthing etc. complete as required. 3 / 4 aluminium blade BLDC ceiling
fan BEE 5 Star Rating as per IS 374:2019, Service Value-7.10m3/ Min
(At turbo Speed)/ 28 to 31Watt full load power at turbo speed.
220m3/min air delivery at turbo speed as per interior design
18 Supplying and fixing of GI box of following size modules, alongwith
modular base & cover plate for modular switches in recess etc as
required.
1 or 2 Module (75mmX75mm) No 60.00 243.00 14,580.00
19 Supply and drawing of UTP 4 pair Cat 6 LAN cable in the existing
surface/recessed PVC conduit as required.
A5 - Page 3 of 6 For Niche Architects
Govt. Girls High School, Jajpur
BLOCK A - ELECTRICAL DETAILED ESTIMATE
S.No DESCRIPTION UNIT QTY RATE AMOUNT
one run mtrs 187.50 49.00 9,187.50
20 Supply & fixing of Faceplate for Flush / Surface Mount Information
Outlets Single Aperture with screw hole covers & Icon Tree Size
86mmX86mm
Single Aperture no 37.00 250.00 9,250.00
21 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid
copper conductor PE insulated, shielded with fine tinned copper braid
and protected with PVC sheath in the existing surface/ recessed steel/
PVC conduit as required
22 Supplying and fixing following modular switch/ socket on the existing
modular plate & switch box including connections but excluding
modular plate etc as required.
TV antenna socket outlet No 4.00 119.00 476.00
Telephone socket outlet No 4.00 105.00 420.00
Supplying and drawing following pair 0.5 mm dia FRLS PVCinsulated
annealed copper conductor, unarmored telephone cable in the existing
23 surface/ recessed steel/ PVC conduit asrequired
2 Pair mtrs 75 18.00 1,350.00
TOTAL carried forward to Summary 2852678.8
Supplying, installation, testing & commissioning of 10 Passenger
(680 Kg), Gearless type, Machine room-less passenger lift
of any of M/s OTIS, M/s Kone, M/s Thyssenkrupp, M/s
Schindler, Lifts make having contract speed 1 m/s serving
MR different floors in the lift shaft as per detailed specifications as
under and additional details given in schedule of technical
particulars. Provisions of General CPWD specifications for lift
works are to be followed.
Speed - 1.0 Metre/Sec.
Floor - 3 stops
Travel - 8.4 Mtr. (Approx.)
Stop & Opening - 3 Stops & 3 Openings (One side only)
Type and Position of Machinery - Gearless type, Machine Room-less
Controller - Micro processer based AC variable voltage & variable
frequency Control
Automatic rescue device complete with dry maintenace free batteries
as required.
Operation - Microprocessor based Simplex Full Collective with /
without attendant.
Power - 415 V ±10%, 3 Phase, 50 Hz. Or as per manufacturer
specifications
Car panel finish - Scrach resistant Stainless steel with side walls Pre-
laminated wooden finish as approved by Architect
Car door - Power operated centre opening horizontal sliding
stainless steel AISI441Scratch resistant
A5 - Page 4 of 6 For Niche Architects
Govt. Girls High School, Jajpur
BLOCK A - ELECTRICAL DETAILED ESTIMATE
S.No DESCRIPTION UNIT QTY RATE AMOUNT
Door operation - Full Height Infra-red cross-multi beam
Landing doors - 2 panel Centre opening, stainless steel scratch
resistant at all floors. It must be fire-rated for minimum 1-Hrs and
supplier must provide the certiifcate for the same alongwith material
supply.
Car operating Panel / Landing operating panel - Car operating
panel with braile symbol luminous buttons and braile illuminated push
buttons on all landing in Stainless Steel Mirror finish.
Hand rail - Shall be SS finish fixed above 900mm from the car-floor
level on rear-wall or side wall.
Voice announcement system - In car to announce the position of
the elevetor in hoist way as the car passes or stop at a floor served by
the elevator
Intercom system - 3-way intercom
Clear Opening of Doors - 800mm x 2200mm (Wide x Height)
Lift Car inside size - 1300 x 1350 x 2400 ( Width x depth x height).
Size of Lift Well - 2000 x 1900 mm(Width x Depth)
Entrance -800mm
Analysed Amount No 1 1437500.00 14,37,500.00
TOTAL carried forward to Summary 1437500.0
Supply, Installation, Testing and Commissioning of on grid Solar
Photovoltaic Power Plant conforming to MNRE specifications as
amended, consisting of Mono/Poly Crystalline silicon solar cells, net
metering facility, necessary protections, earthing, mountedon
Aluminium/GI structure of suitable strength with following components
complete as required:-a)Solar Photovoltaic Module of capacity 330Wp
or above, manufactured in India, conforming to IS14286/ IEC61215,
IS/IEC61730-Part-1, IS/ IEC61730-Part-2. Solar Photovoltaic Module
conversion efficiency shall not be less than16.5%. PV modules used in
solar power plants/systems must be warranted for their output peak
watt capacity, which should not be less than 90% at the end of 10
years and 80% attheend of 25 years. b)Power Conditioning Unit (PCU)
of 350-800V DC Input voltage range and 400V AC, three phase, 4
wire, 50Hz+/-2.5Hz, output voltage suitable to generate AC Power with
efficiency not less than 97%, total harmonic distortion less than3% and
suitable for ambiepto 300 mm height including rounding o
A5 - Page 5 of 6 For Niche Architects
Govt. Girls High School, Jajpur
BLOCK A - ELECTRICAL DETAILED ESTIMATE
S.No DESCRIPTION UNIT QTY RATE AMOUNT
The PCU shall adjust the voltage and frequency level to suit the Grid
Voltage Frequency. c) Data Monitoring System complete with
accessories. d)Fixing of Array junction box & Main junction box with
IP65 protection and termination arrangement for incoming and outgoing
cable along with glands, lugs and other accessories etc. as required. e)
Lightning and surge voltage protection. f) Connections &
Interconnections by supplying & fixing required size XLPE insulated kWp 7 52481.00 3,67,367.00
copper conductor 1.1kV grade armoured power and control cables
between solar modules, main power cable to grid supply PCU unit
along with supplying & fixing of necessary channel/conduit lugs and
other accessories etc. as required.
TOTAL carried forward to Summary 367367.00
24 MAIN LT PANEL
INCOMING
Supply, installation, testing and commissioning of cubical type LT
switchgear suitable for 415V, 3 Phase, 4 Wire 50 Hz AC supply system
fabricated in compartmentalized design from CRCA sheet steel of 2
mm thick for frame work and covers, 3mm thick for gland plates
including cleaning & finishing complete with 7 tank process for powder
coating in approved shade, having suitable capacity extensible type
TPN Aluminium Alloy bus bars of high conductivity, bottom base
channel of MS section not less than 100mm x 50mm x 5mm thick,
fabrication shall be done in transportable sections, entire panel
shall have a common copper earth bar of size 25mm x 5mm at the rear
with 2 Nos. earth stud, solid connections from main bus bar to switch
gears with required size of Al. bus bars and control wiring with
2.5sq.mm. FRLS insulated copper conductor cable, cable alleys, cable
gland plates in two half, i/c providing following 415V Switchgear and
accessories in the Panel as per SLD ,specifications complete as
required (Gpto 300 mm height including rounding of junctions of walls
and slabs.
(c) After two days of proper curing applying a second coat of cement
slurry using 2.75 kg/ sqm of cement ad
1 No 160 A Microprocessor Based FP MCCB, 36 KA service breaking
capacity with heavy duty solid neutral link alongwith Earth fault relay
and CBCT.Rotary handle and spreader link
1 No 160 A, 36 KA Auto changeover switch,
Metering for incoming:
Digital Multifunction meter (MFM-4) with RS-485 communication port
for measurement of PF, V, A & Hz , equivalent to EM6459, with CT as
required.
Phase indicating lamps RYB with 2 Amps SP MCB back up.
BUSBAR
Electrolytic high conductivity Aluminium three phase and neutral
busbars rated at 200 amps, 36KA, insulated with heat shrinkable
coloured PVC sleeves & clip on shrouds for joints. Neutral Bus Bar
shall be 50% of Phase Bus Bar.
OUTGOINGS
10 nos. 63 Amps 10KA FP MCB
ON / OFF indicating lamps with MCB as backup protection.
4 nos. 63 Amps thermal magnetic release 25 kA 440 volt FP MCCB
with overcurrent,earth fault and short circuit releases each complete
ON / OFF indicating lamps with MCB as backup protection.
Main Panel as described as above and as per specification complete
in all respects.
A5 - Page 6 of 6 For Niche Architects
Govt. Girls High School, Jajpur
BLOCK A - HVAC DETAILED ESTIMATE
CONSTRUCTION OF A BLOCK (COLLEGE), GOVT. GIRLS HIGH SCHOOL, JAJPUR, ODISHA.
BOQ:- HVAC WORKS
Description Amount
S.No. Unit Qty Rate
1 HI WALL SPLIT UNITS -
Supply, Installation, testing and commissioning of 3 Star BEE rated Air-
cooled DX type Hi-wall split air conditioners each comprising an outdoor
unit(s) consisting of hermetically sealed Inverter compressor suitable for
operation on 230V, 50Hz, 1 Phase AC supply, air cooled condenser,
condenser fan etc. with outer casing and indoor fan coil unit consisting
of centrifugal fans, fan motor, DX cooling coil, outer casing, filter,
control and power panel with remote etc. entire cabling and wiring from
indoor to outdoor, insulation and with full charge of refrigerant R 410 . -
The indoor and outdoor units shall be with structural steel supports,
angles, rods etc. The quoted price shall also include, refrigerant
charging, supports, Stand , clamps, fittings, connections, sleeves,
supports, MCB. Unit shall be suitable to operate till 52 Deg C ambient
temperature. Make - Hitachi
1.3 2.0 TR Unit Minimum cooling capacity 7000 Watt Nos. 9 48,400.00 4,35,600.00
Supply, Installation, testing and commissioning including vaccumiazation
and Nitrogen testing of following nominal sizes of soft drawn copper
refrigerant piping for Split & Cassette units, complete with fittings, with
suitable adjustable ring type hanger supports, jointing/brazing including
accessories, insulated with 13 mm / 9 mm Class-O closed cell
elastometric nitrile rubber tubular sleeves sections of specified
thickness as given below for Suction and Liquid lines, all accessories as
per specifications etc. as required : Make:Rajco,Mandev,Hindustan..
Complete as required as per site conditions.
3.2 2.0 TR Split Units Rmt 135 1,210.00 1,63,350.00
Supply installation, testing and fixing of heavy duty Class’B’ PVC pipes ISI
as per IS 4985-2000,drain piping complete with 6mm thick aluminum
4 laminated XLPE tublar insulation fittings, supports as per - -
specifications
4.1 32 mm dia Rmt 135 275.00 37,125.00
4.2 25 mm dia Rmt 135 232.00 31,320.00
Supplying and laying of XLPE insulated Copper conductor armored
cables of 1.1KV grade of following sizes directly on wall/ structural
frame/ cable trays or racks using approved type of clamps, double
earthing with GI strip/ wire of suitable size and hardware all complete
as per equipment specifications, drawings and direction of
5.3 4C X 2.5 Sqmm Flexible Rmt 135 370.00 49,950.00
Total ( INR ) 7,17,345.00
A7 - Page 1 of 1 For Niche Architects
Govt. Girls High School, Jajpur
BLOCK A - FURNISHING DETAILED ESTIMATE
CONSTRUCTION OF A BLOCK (COLLEGE), GOVT. GIRLS HIGH SCHOOL, JAJPUR, ODISHA.
BOQ:- FURNISHING WORKS (TENTATIVE)
S No. Description Unit Quantity Rate Amount
1 3 seater desk with bench
2 4 seater desk with bench
Workstation table
4 Table 1500 x 700 nos. 8 14950 119600
5 Table 1800 x 700 nos. 1 20815 20815
6 Credenza 1050 x 450 nos. 3 22080 66240
Reception table 2400 x
8 Center table 1500 x 600 nos. 2 11500 23000
9 Sofa set - 2 seater nos. 2 26680 53360
10 Sofa side table nos. 2 5175 10350
Staff room table 5000 x
12 SS 304 table 2400 x 900 nos. 11 87400 961400
13 SS 304 table with sink nos. 7 117875 825125
14 Study table 2700x1200 nos. 6 31050 186300
15 Side table 2700 x 600 nos. 3 23000 69000
Storage shelf 2400x1500
16 x450 closed
Storage shelf 2400x450
Meeting room table 4700
19 Seating bench 1500 x 450
20 Student chairs nos. 54 6612.5 357075
21 Workstation chairs nos. 35 11212.5 392437.5
22 Executive chairs nos. 2 20987.5 41975
23 Conference chairs nos. 85 7762.5 659812.5
24 Visitor chairs nos. 6 7762.5 46575
25 Lab chairs nos. 77 17250 1328250
Total C/F To Summary 0 8266315.00
26 Window shades sqm 188 6152.5 1154597.776
Total C/F To Summary 0 1154597.776
A8 - Page 1 of 1 For Niche Architects
RENOVATION OF B,C,E AND F BLOCK (COLLEGE), GOVT. GIRLS HIGH SCHOOL,
JAJPUR, ODISHA.
ABSTRACT OF COST
SL.N NON-SOR TOTAL AMOUNT
SL.N NON-SOR TOTAL AMOUNT
DESCRIPTION OF WORK SOR AMOUNT (Rs.)
O. AMOUNT (Rs.) (RS)
A CIVIL WORK :
I EARTH WORK 4,59,476.15 - 4,59,476.15
II CONCRETE WORK 2,63,951.72 - 2,63,951.72
III REINFORCED CEMENT CONCRETE WORK 5,92,855.59 - 5,92,855.59
IV BRICK WORK 5,36,681.25 - 5,36,681.25
V MARBLE & GRANITE WORK 86,749.35 - 86,749.35
VI WOOD AND P.V.C. WORK 20,50,598.36 30,080.00 20,80,678.36
VII STEEL WORK - 5,90,537.43 5,90,537.43
VIII FLOORING WORK 9,76,157.72 4,28,133.60 14,04,291.32
IX ROOFING WORK - - -
X FINISHING WORK 14,46,241.58 2,314.13 14,48,555.71
XI GLAZING WORK 1,59,721.20 - 1,59,721.20
XII WATER PROOFING WORK 7,20,821.35 - 7,20,821.35
TOTAL (A) 72,93,254.27 10,51,065.16 83,44,319.43
B PLUMBING WORK :
I SANITARY FIXTURES & CP BRASS FITTINGS - - -
II SOIL, WASTE, VENT & RAIN WATER PIPES - 47,782.50 47,782.50
III WATER SUPPLY SYSTEM - - -
TOTAL (B) - 47,783.00 47,783.00
C ELECTRICAL WORKS:
I INTERNAL ELECTRICAL WORKS 24,17,683.80 24,17,683.80
TOTAL (C) - 24,17,683.80 24,17,683.80
E FURNISHING WORKS
I INTERIOR FUNRNITURE - -
II BLINDS AND SHADES - -
TOTAL (E) - -
E TOTAL [A+B+C+D+E] = [F] 1,08,09,786.23
1.0 ADD CONTINGENCIES @ 2% 2,16,195.72
TOTAL [G] 1,10,25,981.95
2.0 ADD GST @ 18% ON [G] 19,84,676.75
3.0 ADD LABOUR CESS @ 1% ON [G] 1,10,259.82
TOTAL [H] 20,94,936.57
TOTAL 1,31,20,918.52
NICHE ARCHITECTS
RENOVATION OF B,C,E AND F BLOCK (COLLEGE), GOVT. GIRLS HIGH SCHOOL, JAJPUR, ODISHA.
DETAILED ESTIMATE
AMOUNT
SL.NO. SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS) AMOUNT (RS)
EARTH WORK (FOR ADDITIONAL BOUNDARY WALL
RELATED TO RENOVATION BLOCKS)
Earth work in ordinary soil with initial lead and lift including
rough dressing in layers not exceeding 0.3m in depth and the
1 SOR cum 61.22 143.96 8813.71
Earth transported by transport vehicles as directed by the
Engineer-in-charge.
Extra lift or 1.5m or part there of over the initial lift of 1.5m in all
2 SOR kinds of embankments and road works and ordinary earth work
in general.
a) 1st Extra lift of 1.5m (up to 7.5m) cum 9.00 15.37 138.34
Single under reamed pile foundation with RCC M25 using
12mm size black hard granite crusher broken chips including
3 SOR cost of borring but excluding cost of M.S./Tor steel and labour
charges for cutting, bending and binding of steel.
a 600mm dia and 6.0M long. each 36.00 12323.80 443656.80
Filling in foundation and plinth with excavated materials
4 SOR including watering and ramming as directed by the Engineer-in- cum 48.73 80.00 3898.50
charge of earth work.
5 SOR Transportation of earth from site upto 15km cum 12.49 237.67 2968.80
Filling in foundation and plinth with filling sand, watered and
rammed including cost of material, labour, royality and
6 SOR cum 0.00 361.90 0.00
transportation etc. complete as per specifications and as
directed by Engineer-in-charge.
Supplying chemical emulsion in sealed containers including
delivery as specified.
Chlorpyriphos/ Lindane emulsifiable concentrate of 20% litre 0.00 172.50 0.00
Diluting and injecting chemical emulsion for POST-
8 SOR CONSTRUCTIONAL anti-termite treatment (excluding the cost
of chemical emulsion) :
Treatment of soil under existing floors using chemical emulsion
@ one litre per hole, 300 mm apart including drilling 12 mm
diameter holes and plugging with cement mortar 1 :2 (1 cement
: 2 Coarse sand) to match the existing floor:
Digitally signed by RAJESH
DULALCHANDRA MANDAL
Date: 2023.06.14 16:44:45 IST
RENOVATION OF B,C,E AND F BLOCK (COLLEGE), GOVT. GIRLS HIGH SCHOOL, JAJPUR, ODISHA.
DETAILED ESTIMATE
AMOUNT
SL.NO. SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS) AMOUNT (RS)
With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
TOTAL EARTH WORK 459476.15 0.00
II 2.0 CONCRETE WORK
C.C (1:3:6) with 25mm to 40mm size crrusher broken metal
including all cost, conveyance,royalty & taxes etc.comp.to work
9 SOR cum 1.00 4632.10 4632.10
site as per specification approved by the department & direction
Cement concrete (1:2:4) with 12mm size hard broken granite
chips.
a 1st floor cum 41.58 6087.00 253097.46
C.C (1:4:8) with 25mm to 40mm size crrusher broken metal
including all cost, conveyance,royalty & taxes etc.comp.to work
11 SOR cum 1.46 4267.60 6222.16
site as per specification approved by the department & direction
TOTAL CONCRETE WORK 263951.72 0.00
III 3.0 REINFORCED CEMENT CONCRETE WORK
Providing M.S. reinforcement for R.C.C. work including cutting,
12 SOR bending, binding and tying the grills and placing in position Qtl. 49.23 7841.20 385993.61
including cost of binding wire 18 to 20 gauge.
Providing, hoisting laying of Reinforced Cement concrete of
Grade M-25 including all material & labour charges and also
13 SOR including shuttering and centring but excluding reinforcement
etc. complete as per specifications and as directed by Engineer-
in-Charge of the project.
a Footings cum 8.75 5318.70 46527.99
b Columns below plinth cum 2.29 11099.90 25366.38
c Plinth beam cum 6.81 5674.50 38637.41
d Columns above plinth cum 2.86 11099.90 31707.97
e Slab beam cum 5.82 11099.90 64622.23
TOTAL REINFORCED CEMENT CONCRETE WORK 592855.59 0.00
IV 4.0 BRICK WORK
Brick work withFly ash bricks 25 cm x 12 cmx8cm size having
crushing strength not less than 75 Kg/cm2 with dimensional
14 SOR cum 21.15 4197.50 88777.13
tolerance +8 percent in cement mortar (1:6) in foundation.
Digitally signed by RAJESH
DULALCHANDRA MANDAL
Date: 2023.06.14 16:44:45 IST
RENOVATION OF B,C,E AND F BLOCK (COLLEGE), GOVT. GIRLS HIGH SCHOOL, JAJPUR, ODISHA.
DETAILED ESTIMATE
AMOUNT
SL.NO. SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS) AMOUNT (RS)
Brick work withFly ash bricks 25 cm x 12 cmx8cm size having
crushing strength not less than 75 Kg/cm2 with dimensional
15 SOR cum 105.75 4235.50 447904.13
tolerance +8 percent in cement mortar (1:6) in Super Structure
TOTAL BRICK WORK 536681.25 0.00
I 1.0 MARBLE & GRANITE WORK
Providing and fixing 18 mm thick gang saw cut, mirror polished,
premoulded and prepolished, machine cut for kitchen platforms,
vanity counters, window sills, facias and similar locations of
required size, approved shade, colour and texture laid over 20
1 SOR mm thick base cement mortar 1:4 (1 cement : 4 coarse sand),
joints treated with white cement, mixed with matching pigment,
epoxy touch ups, including rubbing, curing, moulding and
polishing to edges to give high gloss finish etc. complete at all
levels.
Granite of any colour and shade
Area of slab over 0.50 sqm sqm 7.29 2837.60 20686.10
Providing edge moulding to 18 mm thick marble stone counters,
Vanities etc., including machine polishing to edge to give high
gloss finish etc. complete as per design approved by Engineer-
in-Charge.
Granite work metre 20.25 295.00 5973.75
Extra for fixing marble /granite stone, over and above
corresponding basic item, in facia and drops of width upto 150
3 SOR metre 86.40 253.60 21911.04
mm with epoxy resin based adhesive, including cleaning etc.
complete.
Extra for providing opening of required size & shape for wash
basin/ kitchen sink in kitchen platform, vanity counter and
similar location in marble/ Granite/ stone work, including
4 SOR each 0.00 404.10 0.00
necessary holes for pillar taps etc. including moulding, rubbing
and polishing of cut edges etc. complete.
Fixing tiles/Marbles in dados skirting and risers of step on
12mm thick cement plaster (1:3) jointed with neat cement slurry
mixed with pigment to match the shades of the tiles etc.
complete.
Digitally signed by RAJESH
DULALCHANDRA MANDAL
Date: 2023.06.14 16:44:45 IST
RENOVATION OF B,C,E AND F BLOCK (COLLEGE), GOVT. GIRLS HIGH SCHOOL, JAJPUR, ODISHA.
DETAILED ESTIMATE
AMOUNT
SL.NO. SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS) AMOUNT (RS)
Vitrified Tile 600mmx600mm Coloured / Printed series
a Ground Floor sqm 40.10 952.20 38178.46
TOTAL MARBLE & GRANITE WORK 86749.35 0.00
II 2.0 WOOD AND P.V.C. WORK
Providing and fixing factory made single extruded WPC (Wood
Polymer Composite) solid door/window/Ceosetory window s
& other Frames/Chowkhat comprising of virgin PVC polymer of
K value 58-60 (Suspension Grade), calcium carbonate and
natural fibers (wood powder/ rice husk/wheat husk) and non
tox ic additives (maximum toxicity index of 12 for 100 gms)
fabricated with miter jo ints after applying PVC solvent cement
and screwed with full body threaded star headed SS screws
having minimum f rame density of 750 kg/cum, screw
withdrawal strength of 2200 N (Face) & 1100 N (Edge) ,
minimum compressive strength of 58 N/mm2, modulus of elast
6 SOR icity 900 N/mm2 and resistance to spread of flame of Class A
category with property of being termite/borer proof,
water/moisture proof and fire retardant and fixed in position with
M.S hold fast/lugs/SS dash fa steners of required dia and
length complete as per direction of Engineer-In - Charge . (M.S
hold fast/lugs or SS dash fasteners shall be paid for separate
Note: For WPC solid door/window frames , minus 5mm
tolerance in dimensions i.e. depth and width of profile shall be
acceptable . Variation in profile dimensions on plus side shall
be acceptab le but no extra payment on this account shall be
Digitally signed by RAJESH
DULALCHANDRA MANDAL
Date: 2023.06.14 16:44:45 IST
RENOVATION OF B,C,E AND F BLOCK (COLLEGE), GOVT. GIRLS HIGH SCHOOL, JAJPUR, ODISHA.
DETAILED ESTIMATE
AMOUNT
SL.NO. SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS) AMOUNT (RS)
Supplying, fitting and fixing well dressed and well seasoned sal
wood choukaths framed and fixed including two coats coats of
coaltaring to wall and lintel side faces of choukaths including
cost of coaltar and labour for coaltaring and fixing required nos.
of W.I. clamps to the choukaths with approved qualities of
screws including cost, conveyance, loading required for the metre 79.34 75.37 1286.90 102102.65
work etc. complete in all respect with cost, conveyance,
royalties, loading, unloading and taxes of all materials and cost
of all labour, T&P, sundries, scaffolding etc. required for the
work complete in all respect as per specification and direction
of Engineer in Charge
Providing and fixing ISI marked flush door shutters conforming to IS :
2202 (Part I) non-decorative type, core of block board construction
7 SOR with frame of 1st class hard wood and well matched commercial 3 ply
veneering with vertical grains or cross bands and face veneers on
both faces of shutters:
35 mm thick including ISI marked Stainless Steel butt hinges with
necessary screws
Extra for providing lipping with 2nd class teak wood battens 25
8 SOR mm minimum depth on all edges of flush door shutters (over all sqm 32.83 31.19 345.00 11326.35
area of door shutter to be measured).
Providing and fixing wooden moulded beading to door and
9 SOR window frames with iron screws, plugs and priming coat on
unexposed surface etc. complete :
2nd class teak wood
50 x 20 mm metre 79.00 75.05 169.66 13403.14
Providing 40x5 mm flat iron hold fast 40 cm long including fixing
to frame with 10 mm diameter bolts, nuts and wooden plugs
10 SOR and embedding in cement concrete block 30x10x15cm 1:3:6 each 80.00 76.00 112.50 9000.00
mix (1 cement : 3 coarse sand : 6 graded stone aggregate
20mm nominal size).
Door Hardware
dormakaba BB 4330, 5 Knuckle, 2 Ball bearing butt hinges size
11 MR 4" x 3" x 3mm, in SS 304 and in SSS finish. Suitable for door each 86.00 312.00 26832.00
weights upto 120kgs. Template Drilled
Digitally signed by RAJESH
DULALCHANDRA MANDAL
Date: 2023.06.14 16:44:45 IST
RENOVATION OF B,C,E AND F BLOCK (COLLEGE), GOVT. GIRLS HIGH SCHOOL, JAJPUR, ODISHA.
DETAILED ESTIMATE
AMOUNT
SL.NO. SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS) AMOUNT (RS)
dormakabakaba ML 550S Digital Mortise lock in standard
design accessible by Fingerprint (100 nos.), RFID (100 Nos.),
PIN (4 Nos.), BLE (10 mobiles), Mechanical Keys (3 nos.).
12 MR each 0.00 41861.00 0.00
Emergency Power: external 9VDC alkaline battery. Mortise lock
in Black with Bright Chrome Rim finish. Remote Control
(optional)
dormakaba floor stop half dome with 45mm dia with fixing
13 MR each 14.00 232.00 3248.00
accessories, in satin Chrome
Providing and fixing aluminium die cast body tubular type
universal hydraulic door closer (having brand logo with ISI, IS :
14 SOR 3564, embossed on the body, door weight upto 35 kg and door each 0.00 832.30 0.00
width upto 700 mm), with necessary accessories and screws
etc. complete.
Providing & Fixing decorative high pressure laminated sheet of
plain / wood grain in gloss / matt/ suede finish with high density
15 SOR protective surface layer and reverse side of adhesive bonding
quality conforming to IS : 2046 Type S, including cost of
adhesive of approved quality.
1.0 mm thick sqm 65.00 61.75 693.36 45068.40
Digitally signed by RAJESH
DULALCHANDRA MANDAL
Date: 2023.06.14 16:44:45 IST
RENOVATION OF B,C,E AND F BLOCK (COLLEGE), GOVT. GIRLS HIGH SCHOOL, JAJPUR, ODISHA.
DETAILED ESTIMATE
AMOUNT
SL.NO. SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS) AMOUNT (RS)
Providing and fixing factory made uPVC white colour fixed
glazed windows/ventilators comprising of uPVC multi-
chambered frame and mullion (where ever required) extruded
profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild
steel section made from roll forming process of required length
(shape & size according to uPVC profile), uPVC extruded
glazing beads of appropriate dimension, EPDM gasket, G.I
fasteners 100 x 8 mm size for fixing frame to finished wall,
plastic packers, plastic caps and necessary stainless steel
screws etc. Profile of frame shall be mitred cut and fusion
welded at all corners, mullion (if required) shall be also fusion
welded including drilling of holes for fixing hardware's and
16 MR drainage of water etc. After fixing frame the gap between frame
and adjacent finished wall shall be filled with weather proof
silicon sealant over backer rod of required size and of approved
quality, all complete as per approved drawing & direction of
Engineer-in-Charge. (Single / double glass panes and silicon
sealant shall be paid separately).
Note: For uPVC frame, sash and mullion extruded profiles
minus 5% tolerance in dimension i.e. in depth & width of profile
shall be acceptable. Variation in profile dimension in higher side
shall be accepted but no extra payment on this account shall be
Fixed window / ventilator made of (small series) frame 47 x 50
mm & mullion 47 x 68 mm both having wall thickness of 1.9 ±
0.2 mm and single glazing bead of appropriate dimension.
(Area upto 0.75 sqm.)
Digitally signed by RAJESH
DULALCHANDRA MANDAL
Date: 2023.06.14 16:44:45 IST
RENOVATION OF B,C,E AND F BLOCK (COLLEGE), GOVT. GIRLS HIGH SCHOOL, JAJPUR, ODISHA.
DETAILED ESTIMATE
AMOUNT
SL.NO. SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS) AMOUNT (RS)
Providing and fixing factory made uPVC white colour sliding
glazed window upto 1.50 m in height dimension comprising of
uPVC multi-chambered frame with in-built roller track and sash
extruded profiles duly reinforced with 1.60 ± 0.2 mm thick
galvanized mild steel section made from roll forming process of
required length (shape & size according to uPVC profile),
appropriate dimension of uPVC extruded glazing beads and
uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy
(white powder coated) touch locks with hook, zinc alloy body
with single nylon rollers (weight bearing capacity to be 40 kg),
G.I fasteners 100 x 8 mm size for fixing frame to finished wall
and necessary stainless steel screws etc. Profile of frame &
sash shall be mitred cut and fusion welded at all corners,
17 MR including drilling of holes for fixing hardware's and drainage of
water etc. After fixing frame the gap between frame and
adjacent finished wall shall be filled with weather proof silicon
sealent over backer rod of required size and of approved
quality, all complete as per approved drawing & direction of
Engineer-in-Charge. (Single / double glass panes, wire mesh
and silicon sealent shall be paid separately)
Note: For uPVC frame and sash extruded profiles minus 5%
tolerance in dimension i.e. in depth & width of profile shall be
acceptable. Variation in profile dimension in higher side shall be
accepted but no extra payment on this account shall be made.
Three track three panels sliding window with fly proof SS wire
mesh (Two nos. glazed & one no. wire mesh panels) made of
(small series) frame 92 x 44 mm & sash 32 x 60 mm both
having wall thickness of 1.9 ± 0.2 mm and single glazing bead
of appropriate dimension (Area of window upto 1.75 sqm).
TOTAL WOOD AND P.V.C. WORK 2050598.36 30080.00
III 3.0 STEEL WORK
Digitally signed by RAJESH
DULALCHANDRA MANDAL
Date: 2023.06.14 16:44:45 IST
RENOVATION OF B,C,E AND F BLOCK (COLLEGE), GOVT. GIRLS HIGH SCHOOL, JAJPUR, ODISHA.
DETAILED ESTIMATE
AMOUNT
SL.NO. SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS) AMOUNT (RS)
Steel work in built up tubular/built up sections/ framed work,
(round, square or rectangular hollow tubes etc.) trusses etc.,
including chequered plates, cutting, hoisting, fixing in position
and applying a priming coat of approved steel primer, including
welding and bolted with special shaped washers etc. complete.
Electric resistance or induction butt welded tubes kg 5175.00 109.30 565627.50
Providing & fixing fly proof wire gauze to windows, clerestory
19 MR windows & doors with M.S. Flat 15x3 mm and nuts & bolts
complete.
Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and
1.4 mm aperture on both sides
TOTAL STEEL WORK 0.00 590537.43
IV 4.0 FLOORING WORK
Providing and laying Polished Granite stone flooring in required
design and patterns, in linear as well as curvilinear portions of
the building all complete as per the architectural drawings with
18 mm thick stone slab over 20 mm (average) thick base of
cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed
with cement slurry and pointing with white cement slurry
admixed with pigment of matching shade including rubbing ,
curing and polishing etc. all complete as specified and as
directed by the Engineer-in-Charge.
Polished Granite stone slab jet Black, Cherry Red, Elite Brown,
Cat Eye or equivalent.
a Ground Floor sqm 2.03 2575.40 5215.19
b First Floor sqm 0.00 3019.70 0.00
Digitally signed by RAJESH
DULALCHANDRA MANDAL
Date: 2023.06.14 16:44:45 IST
RENOVATION OF B,C,E AND F BLOCK (COLLEGE), GOVT. GIRLS HIGH SCHOOL, JAJPUR, ODISHA.
DETAILED ESTIMATE
AMOUNT
SL.NO. SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS) AMOUNT (RS)
LAMINATE PANELING: P/F of wooden Sound proof paneling
made using frame work of Gyproc make Standard floor / Stud
sections 2’ C/C fixed to walls using standard PVC sleeves /
screw, to be covered with 12 MM ply (make ………), space
21 MR between wall and ply to be filled with glass wool 3’th in fiber sqm 64.80 6607.00 428133.60
mesh. Facia to be covered with 1 mm laminate (make…….) as
per drawing and design. Rates to be inclusive of all material,
labor, wastage hardware T&P etc.
Supplying, fitting ,fixing vitrified tile of ( Printed ) in floors of
size 600mmx600mm of approved make conferming to IS:13755
laid on 20mm thick cement mortar (1:4) (1 cement:4 sand) and
22 SOR filling joints with white cement of approved quality including cost
of all materials,labour T&P etc required for the work all
complete as per the direction of Engineer-in-charge.
a Ground Floor sqm 193.68 931.50 180416.27
b First Floor sqm 15.30 941.50 14404.95
c Second Floor sqm 18.18 941.50 17118.59
d Terrace sqm 805.66 941.50 758524.70
Fixing tiles/Marbles in dados skirting and risers of step on
12mm thick cement plaster (1:3) jointed with neat cement slurry
mixed with pigment to match the shades of the tiles etc.
complete.
Granite tiles (above 0.40 Sqm. 20mm thick.)
a Ground Floor sqm 0.20 2360.60 478.02
b First Floor sqm 0.00 2391.60 0.00
Digitally signed by RAJESH
DULALCHANDRA MANDAL
Date: 2023.06.14 16:44:45 IST
RENOVATION OF B,C,E AND F BLOCK (COLLEGE), GOVT. GIRLS HIGH SCHOOL, JAJPUR, ODISHA.
DETAILED ESTIMATE
AMOUNT
SL.NO. SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS) AMOUNT (RS)
Providing and laying at or near ground level factory made
kerb stone of M-25 grade cement concrete in position to
the required line, level and curvature, jointed with cement
mortar 1:3 (1 cement: 3 coarse sand), including making
joints with or without grooves (thickness of joints except at
24 MR sharp curve shall not to more than 5mm), including cum 13.43 7123.50 95638.31
making drainage opening wherever required complete etc.
as per direction of Engineer-in-charge (length of finished
kerb edging shall be measured for payment). (Precast
C.C. kerb stone shall be approved by Engineer-in-charge).
Providing and laying factory made chamfered edge Cement
Concrete paver blocks in footpath, parks, lawns, drive ways or
light traffic parking etc, of required strength, thickness & size/
shape, made by table vibratory method using PU mould, laid in
required colour & pattern over 50mm thick compacted bed of
sand, compacting and proper embedding/laying of inter locking
paver blocks into the sand bedding layer through vibratory
compaction by using plate vibrator, filling the joints with sand
and cutting of paver blocks as per required size and pattern,
finishing and sweeping extra sand. complete all as per direction
of Engineer-in-Charge.
16.91.2 80 mm thick C.C. paver block of M-30 grade with
approved color design and pattern.
TOTAL FLOORING WORK 976157.72 428133.60
V 5.0 ROOFING WORK
Digitally signed by RAJESH
DULALCHANDRA MANDAL
Date: 2023.06.14 16:44:45 IST
RENOVATION OF B,C,E AND F BLOCK (COLLEGE), GOVT. GIRLS HIGH SCHOOL, JAJPUR, ODISHA.
DETAILED ESTIMATE
AMOUNT
SL.NO. SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS) AMOUNT (RS)
Providing and laying Manglore tiles 400mm x 250mm
including preparation of surface as required for treatment
of sloping roofs consisting of following operations:
(a) Applying a slurry coat of neat cement using 2.75
kg/sqm of cement admixed with water proofing compound
conforming to IS. 2645 and approved by Engineer-in-
MR charge over the RCC slab including adjoining walls upto sqm 0.00 929.20 0.00
300 mm height including cleaning the surface before
treatment.
(b) Laying Manglore tiles with mortar 1:4 (1 cement : 4
coarse sand) admixed with water proofing compound
conforming to IS : 2645 and approved by Engineer-in-
charge.
TOTAL ROOFING WORK 0.00 0.00
VI 6.0 FINISHING WORK
6 mm thick cement plaster (1:4) to R CC surfaces finished
24 SOR smooth including closed deep chiping and slury treatment. Per sqm 436.50 157.00 68530.50
16mm thick cement plaster (1:6) over brick or stone masonry.
25 SOR sqm 585.00 199.90 116941.50
Providing and applying plaster of paris putty of 2 mm thickness
25 SOR over plastered surface to prepare the surface even and smooth sqm 2271.85 244.80 556151.97
complete.
Finishing walls with textured exterior paint of required shade
:New work (Two or more coats applied @ 3.28 ltr/10 sqm) over
26 SOR and including priming coat of exterior primer applied @ sqm 2567.81 204.70 525631.40
2.20kg/10 sqm
Painting two coats to the wall surface by using 100% premium
Acrylic emulsion paint to interior wall surface over a coat of
primer with water bond cement primer after preparing the
27 SOR surface smooth by applying putty punning with Synthetic Acrylic sqm 2271.85 78.08 177387.94
wall putty including finishing the surface smooth by sand
papering in all heights etc. complete in all respect.
Digitally signed by RAJESH
DULALCHANDRA MANDAL
Date: 2023.06.14 16:44:45 IST
RENOVATION OF B,C,E AND F BLOCK (COLLEGE), GOVT. GIRLS HIGH SCHOOL, JAJPUR, ODISHA.
DETAILED ESTIMATE
AMOUNT
SL.NO. SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS) AMOUNT (RS)
Applying priming coats with primer of approved brand and
manufacture, having low VOC (Volatile Organic Compound )
28 13.85 content. With ready mixed pink or grey primer on wood work sqm 22.97 69.59 1598.27
(hard and soft wood) having VOC content less than 50 grams/
Providing and injecting approved grout in proportion
recommended by the manufacturer into cracks/honey-comb
DSR area of concrete/ masonry by suitable gun/pump at required
29 analysis pressure including cutting of nipples after curing etc. complete
26.35 as per directions of Engineer-in- Charge.
(The payment shall be made on the basis of actual weight of
approved grout injected.)
26.35.1 Stirrer mixed Acrylic Polymer of approved make @ 2%
of weight of cement used) modified Cement slurry made
with non shrink compound in concrete/RCC work
TOTAL FINISHING WORK 1446241.58 2314.13
VII 7.0 GLAZING WORK
Providing and fixing glazing in aluminium door, window,
ventilator shutters and partitions etc. with EPDM rubber /
1 SOR neoprene gasket etc. complete as per the architectural
drawings and the directions of engineer-in-charge . (Cost of
aluminium snap beading shall be paid in basic item):
With float glass panes of 4.0 mm thickness (weight not less
than 10 kg/ sqm)
TOTAL ALUMINIUM WORK 159721.20 0.00
VIII 8.0 WATER PROOFING WORK
Digitally signed by RAJESH
DULALCHANDRA MANDAL
Date: 2023.06.14 16:44:45 IST
RENOVATION OF B,C,E AND F BLOCK (COLLEGE), GOVT. GIRLS HIGH SCHOOL, JAJPUR, ODISHA.
DETAILED ESTIMATE
AMOUNT
SL.NO. SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS) AMOUNT (RS)
Providing and laying integral cement based water proofing
treatment including preparation of surface as required for
treatment of roofs, balconies, terraces etc consisting of
following operations:
(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of
cement admixed with water proofing compound conforming to
IS. 2645 and approved by Engineer-in-charge over the RCC
slab including adjoining walls upto 300 mm height including
cleaning the surface before treatment.With average thickness
of 120 mm and minimum thickness at khurra as 65 mm.
(b) Laying brick bats with mortar using broken bricks/brick bats
25 mm to 115 mm size with 50% of cement mortar 1:5 (1
cement : 5 coarse sand) admixed with water proofing
compound conforming to IS : 2645 and approved by Engineer-
30 SOR in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 sqm 506.51 1423.10 720821.35
cement :5 coarse sand ) admixed with water proofing
compound conforming to IS : 2645 and approved by Engineer-
in-charge to required slope and treating similarly the adjoining
walls upto 300 mm height including rounding of junctions of
walls and slabs.
(c) After two days of proper curing applying a second coat of
cement slurry using 2.75 kg/ sqm of cement admixed with water
proofing compound conforming to IS : 2645 and approved by
Engineerin- charge.
(d) Finishing the surface with 20 mm thick jointless cement
mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water
proofing compound conforming to IS : 2645 and approved by
Engineerin- charge including laying glass fibre cloth of
approved quality in top layer of plaster and finally finishing the
TOTAL WATER PROOFING WORK 720821.35 0.00
Digitally signed by RAJESH
DULALCHANDRA MANDAL
Date: 2023.06.14 16:44:45 IST
RENOVATION OF B,C,E AND F BLOCK (COLLEGE), GOVT. GIRLS HIGH SCHOOL, JAJPUR, ODISHA.
SUMMARY OF PLUMBING WORKS
NSR AMOUNT
S. No. Description SOR AMOUNT (Rs.) TOTAL AMOUNT
S. No. Description SOR AMOUNT (Rs.) TOTAL AMOUNT
1 Sanitary Fixtures & CP Brass Fittings 0.00 0.00 0.00
2 Soil, Waste, Vent & Rain Water Pipes 47782.50 47782.50
3 Water Supply System 0.00 0.00 0.00
4 Rain water harvesting 0.00 0.00
Total 47782.50 47782.50
PL Estimate Page-1
RENOVATION OF B,C,E AND F BLOCK (COLLEGE), GOVT. GIRLS HIGH SCHOOL, JAJPUR, ODISHA.
BOQ - PLUMBING ITEMS
Amount
S. No. DSR 2021 Description of Item Unit Qty Rate
DSR 2021 NSR
Sanitary Fixtures & CP Brass Fittings
1.0 17.78. Providing and fixing white vitreous china extended wall
mounting water closet of size of approved shape including
providing & fixing white vitreous china cistern with dual flush
fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/
8 litres), including seat cover, and cistern fittings, nuts, bolts
and gasket etc complete. Each 0 22500.00 0
2.0 MR Providing and fixing in position best indian Health Faucet with
8mm dai 1 meter long Flaxible Tube and wall bracket with N.
R. V. (nonreturn wall). Each 0 2250.00 0
3.0 DSR-17.7A Providing and fixing wash basin with C.I. brackets, 15 mm dia
CP Brass single hole basin mixer of approved quality and
make, including painting of fittings and brackets, cutting and
making good the walls wherever required:-
3.1 a White Vitreous China Wash basin size 550x400 mm with a
15 mm C.P. brass single hole basin mixer. Each 0 12500.00 0
4.0 17.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen
sink with mat finish as per IS 13983 with C.I. brackets and
stainless steel plug 40 mm including painting of fittings and
brackets, cutting and making good the walls wherever
required :
4.1 17.10.1.3 Kitchen sink with drain board 510x1040 mm, bowl depth
200mm. Each 0 12500.00 0
5 DSR-17.22B Providing and fixing CP Brass Single lever telephonic wall
mixer of quality & make as approved by Engineer in charge.
5.1 (a) 15 mm nominal dia Each 0 10000.00 0
6 17.22A Providing and fixing CP Brass 32mm size Bottle Trap of
approved quality & make and as per the direction of Engineer-
in-charge. Each 0 883.05 0
7 17.34 Providing and fixing toilet paper holder :
17.34.1 C.P. brass Each 0 680.80 0
8 18.22 Providing and fixing C.P. brass shower rose with 15 or 20
mm inlet :
8.1 18.22.1 100 mm diameter Each 0 166.35 0
9 18.49 Providing and fixing C.P. brass bib cock of approved quality
conforming to IS:8931 :
9.1 18.49.1 15 mm nominal bore Each 0 434.20 0
10 18.51 Providing and fixing C.P. brass long body bib cock of
approved quality conforming to IS standards and weighing
not less than 690 gms.
10.1 18.51.1 15 mm nominal bore Each 0 552.35 0
11 18.53 Providing and fixing C.P. brass angle valve for basin mixer
and geyser points of approved quality conforming to IS:8931
11.1 18.53.1 15 mm nominal bore Each 0 708.40 0
12 DSR-18.53A Providing and fixing C.P. Brass extension nipple (size
15mmx50mm) of approved make and quality as per direction
of Engineer-in-charge. Each 0 61.70 0
PL-Estimate Page-2
Amount
S. No. DSR 2021 Description of Item Unit Qty Rate
DSR 2021 NSR
13 18.65 Providing and fixing PTMT soap Dish Holder having length of
breadth 102mm, height of 75mm with concealed fitting
arrangements,
weighing not less than 106 gms Each 0 96.75 0
14 17.72 Providing and fixing PTMT towel ring trapezoidal shape 215
mm long,200 mm wide with minimum distances of 37 mm
from wall face withconcealed fittings arrangement of
approved quality and colour, weighing not less than 88 gms
15 17.73 Providing and fixing PTMT towel rail complete with brackets
fixed to
wooden cleats with CP brass screws with concealed fittings
arrangement of approved quality and colour
16 17.73.1 450 mm long towel rail with total length of 495 mm, 78 mm
wide and effective height of 88 mm, weighing not less than
170 gms Each 0 573.60 0
17 17.71 Providing and fixing PTMT liquid soap container 109 mm
mm high and 112 mm distance from wall of standard shape
bracket of the same materials with snap fittings of approved
quality
and colour, weighing not less than 105 gms. Each 0 146.30 0
18 Providing and fixing vertical storage type hot water heater
fixed to wall with anchor bolts & nuts, 15mm CP brass angle
stop cock and 15mm CP brass non-return valve complete
including making connections with 15mm dia CP connecting
pipes on inlet and outlet, suitable length of power cable and
15 amps plug.
18.1 NS-9 Capacity15Litres Venus Model Magma 25GV Each 0 12500.00 0
19 NS Providing and fixing 15mm C.P brass Sink MixerJaguar
Model. No. FLR-5165 or approvedequivalent.) for kitchen
sink with swinging spout complete. Including cutting and
making good the walls wherever required .
20 Female Urinal Pot. (14''X17''X04'') Premium Designer
Luxurious Ceramic Floor Mount Urinal Pot for Ladies /
Female / Girls / Women Toilet / Bathroom / Washroom
(IVORY) Each 0 5000.00 0
Total C/F to Summary 0.00 0
PL-Estimate Page-3
Amount
S. No. DSR 2021 Description of Item Unit Qty Rate
DSR 2021 NSR
SOIL, WASTE & VENT AND RAIN WATER PIPES AND
FITTINGS
20 4.1 Providing and laying in position cement concrete of specified
grade excluding the cost of centring and shuttering. All work
up to plinth.
20.1 4.1.3 1:2:4 ( 1cement : 2 Coarse sand : 4 graded stone aggregate
20 mm nominal size ) Cum 0 7365.15 0.00
21 DSR-12.22 Making khurras 45x45 cm with average minimum thickness
of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4
graded stone aggregate of 20 mm nominal size) over P.V.C.
sheet 1mx1mx400micron, finished with 12mm cement plaster
1:3 (1 cement : 3 coarse sand) and a coat of neat cement,
rounding the edges and making and finishing the outlet
complete. Each 5 266.60 1333.00
22.0 DSR-12.44 Providing and fixing to the inlet mouth of rain water pipe cast
iron grating 15 cm diameter and weighing not less than 440
grams. Each 5 47.90 239.50
23.0 Providing and fixing 110 mm dia PVC floor trap
moulded EXTENTION PIECE (Height Riser) having 3
NS nos. boss inlets suitable for 50 and 40 mm pipe NOS 350.00
connections, jointing and dripseal all complete as per
standard detail. 0 0.00
Providing and fixing floor drain points formed out of
UPVC 110 X 50 mm dia reducer with suitable
NS NOS 385.00
extension piece including cost of cutting and making
good the walls and floors wherever required.
25 Providing and fixing C.P JALI 125 mm X 125 mm
NS square vertical grating fixed in wall / floor for tarrace NOS 300.00
rain water outlet, complete work. 5 1500.00
26 Providing, jointing and fixing UPVC Soil, Waste and
Vent pipes of approved make conforming to IS : 13592
Class B, 6 kg/cm2 pressure including fittings and
specials, i.e. bends, tees, crosses, access pieces,
adaptors for connections to other materials, plugs,
NS reducers, cowls, offsets, etc.in pipe ducts , sunken
floors, under slung from ceiling and jointing with epoxy
based sealant-`Dripseal`, Pipes may be laid/ fixed in
pipe ducts, sunken floors, under slung from ceiling. The
pipes shall be laid to
26.10 63 mm dia M 0 600 0.00
26.20 110 mm dia M 57 750 42750.00
27 NS-26 Providing and fixing in position 110x63 mm dia uPVC
reducing elbow including fix to floor with cement mortar. Each 0 151.00 0.00
28 NS-27 Providing and fixing 100 mm dia GI inlet fitting/ Extension
Piece with 2 or 3 inlets of 32 to 50 mmdia, fixed to CI trap
with lead joint and set in cement concrete as per drawing
complete. Each 0 906.00 0.00
29 NS-28 Providing and fixing in position 125x125 mm stainless steel
grating for floor trap/floor drain including fix to floor with
cement mortar. Each 7 280.00 1960.00
Total C/F to Summary 47782.50
PL-Estimate Page-4
Amount
S. No. DSR 2021 Description of Item Unit Qty Rate
DSR 2021 NSR
Water Supply System
30 DSR-18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)
pipes, having thermal stability for hot & cold water supply,
including all CPVC plain & brass threaded fittings, i/c fixing
the pipe with clamps at 1.00 m spacing. This includes jointing
of pipes & fittings with one step CPVC solvent cement and
the cost of cutting chases and making good the same
including testing of joints complete as per direction of
Engineer in Charge
Concealed work including cutting chases and making good
the walls etc.
30.1 18.8.1 15 mm nominal outer dia .Pipes. Metre 0 441.15 0.00
30.2 18.8.2 20 mm nominal outer dia .Pipes. Metre 0 513.75 0.00
31 DSR-18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)
pipes, having thermal stability for hot & cold water supply
including all CPVC plain & brass threaded fittings This
includes jointing of pipes & fittings with one step CPVC
solvent cement, trenching, refilling & testing ofjoints complete
as per direction of Engineer in Charge
Internal work - Exposed on wall
31.1 18.9.1 15 mm dia nominal bore Metre 0 221.35 0.00
31.2 18.9.2 20 mm dia nominal bore Metre 0 275.25 0.00
32 DSR-18.17 Providing and fixing gun metal gate valve with C.I. wheel of
approved quality (screwed end) :
32.1 18.17.1A 20 mm dia nominal bore Each 0 460.20 0.00
32.2 18.17.1 25 mm dia nominal bore Each 0 497.15 0.00
33 18.48 Providing and placing on terrace (at all floor levels)
polyethylene water
storage tank, IS : 12701 marked, with cover and suitable
locking
arrangement and making necessary holes for inlet, outlet and
overflow
pipes but without fittings and the base support for tank. per litre 0 9.7 0.00
Total C/F to Summary 0.00
RAIN WATER HARVESTING
23.1 Boring/drilling bore well of required dia for casing/ strainer
pipe, by suitable method prescribed in IS: 2800 (part I),
including collecting samples from different strata, preparing
and submitting strata chart/bore log, including hire &
running charges of all equipments, tools, plants &
machineries required for the job, all complete as per
direction of Engineer-in-charge, upto 90 metre depth below
34 ground level.
23.1.1 All types of soil
23.1.1.1 300 mm dia metre 512.3 0
23.3 Supplying, assembling, lowering and fixing in vertical
position in bore well, unplasticized PVC medium well casing
(CM) pipe of required dia, conforming to IS: 12818, including
required hire and labour charges, fittings & accessories etc.
all complete, for all depths, as per direction of Engineer -in-
charge.
23.3.1 100 mm nominal size dia metre 600.35 0.00
23.5 Supplying, filling, spreading & leveling stone boulders of size cum
range 5 cm to 20 cm, in recharge pit, in the required
thickness, for all leads & lifts, all complete as per direction of
Engineer-in-charge. 0.00
23.7 Supplying, filling, spreading & leveling coarse sand of size cum
range 1.5 mm to 2 mm in recharge pit, in required thickness
over gravel layer, for all leads & lifts, all complete as per 1326.55
direction of Engineer -incharge.
PL-Estimate Page-5
Amount
S. No. DSR 2021 Description of Item Unit Qty Rate
DSR 2021 NSR
23.9 Providing and fixing factory made precast RCC perforated each
drain covers, having concrete of strength not less than M-25,
of size 1000 x 450x50 mm, reinforced with 8 mm dia four
nos longitudinal & 9 nos cross sectional T.M.T. hoop bars,
including providing 50 mm dia perforations @ 100 to 125
mm c/c, including providing edge binding with M.S. flats of
size 50 mm x 1.6 mm complete, all as per direction of
Engineerin-
charge.
23.13 Providing and fixing suitable size threaded mild steel cap or
spot welded plate to the top of bore well housing/ casing
pipe, removable as per requirement, all complete for
borewell of:
23.13.1 100 mm dia each 189.65 0.00
Total C/F to Summary 0.00 0.00
PL-Estimate Page-6
RENOVATION OF B,C,E AND F BLOCK (COLLEGE), GOVT. GIRLS HIGH SCHOOL, JAJPUR, ODISHA.
BOQ - ELECTRICAL WORKS
S.No DSR 2018 DESCRIPTION UNIT QTY RATE AMOUNT
Wiring for light point/ fan point/ exhaust fan point/ call bell point
with 1.5 sq.mm FRLS PVC insulated copper conductor single
core cable in surface / recessed medium class PVC
1 1.10 conduit,with modular switch, modular plate, suitable GI box and Point 378.00 694.00 2,62,332.00
earthing the point with 1.5 sq.mm FRLS PVC insulated copper
conductor single core cable etc. as required. (Group-A)
Wiring for light /power plug with 2 x 4 Sq.mm. FRLS PVC
insulated, copper conductor single core cable in surface /
2 1.12 recessed medium class PVC conduit along with 1 no. 4 m 1962.00 200.00 3,92,400.00
Sq.mm FRLS PVC insulated copper conductor single core
cable for loop earthing as required.
Wiring for circuit / submain wiring alongwith earth wire
with the following sizes of FRLS PVC insulated, copper
conductor single core cable in surface/ recessed medium class
PVC conduit as required.
3.1 1.14.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire. m 756.00 167.00 1,26,252.00
3.2 1.14.4 2 x 6 sq.mm. + 1 x 6 sq.mm. Earth wire m 437.40 249.00 1,08,912.60
3.3 1.14.11 4 x 16 sq.mm. + 2 x 6 sq.mm. Earth wire m 146.25 752.00 1,09,980.00
1.21 Supply and fixing of following sizes of medium class PVC
conduit along with accessories in surface/recess including
cutting the wall and making good the same in case of recessed
conduit as required.
1.31 Supply and fixing of suitable size GI box with modular plate
and cover in front on surface or in recess including providing
5 and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps. 77.40 460.00 35,604.00
modular switch, connection etc. as required.
1.32 Supply and fixing of suitable size GI box with modular plate
and cover in front on surface or in recess, including providing
6 and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 41.40 580.00 24,012.00
15/16 amps. modular switch, connection etc. as required.
1.25 Supply and fixing two module stepped type electronic fan
regulator on the existing modular plate switch box including
connections but excluding modular plate etc. as required.
DISTRIBUTION BOARDS & MCB's
Supplying and fixing 5 amps. to 32 amps. rating, 240/415 V,
10kA, "C" curve, miniature circuit breaker (MCB) suitable for
2.10 inductive load of following poles in the existing MCB DB
complete with connections, testing and commissioning etc. as
required.
2.10.1 single pole Each 145.80 199.00 29,014.20
2.4 Supplying and fixing following way, horizontal type three pole
and neutral, sheet steel, MCB distribution board, 415 V, on
surface/ recess, complete with tinned copper bus bar, neutral
bus bar, earth bar, din bar, interconnections, powder painted
including earthing etc. as required. (But without MCB/RCCB/
9 Isolator)
2.4.3 8 way, Double door Each 4.00 4601.00 18,404.00
10 2.15 Supplying and fixing following rating, four pole, (three phase
and neutral), 415 volts, residual current circuit breaker (RCCB),
having a sensitivity current upto 300 milliamperes in the existing
MCB DB complete with connections, testing and commissioning
etc. as required.
2.15.3 63 amps Each 3.00 2,777.00 8,331.00
1.57 Supplying & fixing suitable size GI box wih modular plate and
cover in front on surface or in recess including providing and
fixing 25 A modular socket outlet and 25 A modular SP MCB,
11 "C" EACH 21.00 639.00 13,419.00
curve including connections, painting etc. as required
1/5 Int Electrical_BOQ (3)
S.No DSR 2018 DESCRIPTION UNIT QTY RATE AMOUNT
12 5.15 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in
recess for connections etc. as required.(Make-Obo/ Aps) m 36.00 206.00 7,416.00
13 5.18 Providing and fixing 6 SWG dia G.I. wire on surface or in
recess for loop earthing along with existing surface / recessed
conduit / submain wiring / cable as required. (Make-Obo/ Aps)
14 MR Supply, installation, testing and commissioning of advance
maintenance free Chemical Gel GI Earthing of JK Chem rode
copper of 3mtr long 50mm dia CHEMRODE filled with highly
conducting metallic compounds with the permanent sealings at
both the ends with compressed at the top along with 50 Kgs of
RESLOW mixture of Resistance Lowering Grounding Minerals.
The loss on ignition by mass of the chemical compound shall be
less than 22%. The chemical compound should be tested and Nos 3.00 4500.00 13,500.00
certified by any International accredited and BIS (Bureau of
Indian Standards) accredited laboratory. The chemical earth
electrode manufacturer shall be an ISO 9001:2015 & ISO
14001:2015 certified organization. The Earth pit should be
covered with heavy duty polyplastic weather proof chamber.
Make-APS/ JK / OBO
LIGHTING FIXTURES & FANS
Supply, installation, testing and commissioning of wall / ceiling
/ LED light luminaires with all accessories as per standard item
etc complete as required as per the standard catalogue item.
a Supply, installation, testing and commissioning of Aluminium,
CRC Sheet base,mild steel arm, SS Finish, Acrylic diffuser, 5W
MR Nos. 2.00 1665.00 3,330.00
Led Picture Light as per Lustre item No. Li-36001-5/ Philips as
per Interior design.
b Supply, installation, testing and commissioning of Aluminium,
CRC Sheet base,mild steel arm, SS Finish, Acrylic diffuser,
MR Nos. 2.00 3285.00 6,570.00
20W Led Picture Light as per Lustre item No. Li-36004-20 /
Philips as per Interior design..
c Supply, installation, testing and commissioning of COB based
down light, Housing made of Cast aluminum, power coated,
MR Nos. 27.00 3168.00 85,536.00
Acrylic diffuser.16W Led Down Light as per Lustre item No. Li-
14035-16/ Philips as per Interior design..
d Supply, installation, testing and commissioning of Surface
mounted LED downlighter(round shape) with lumen output
minimium 1000 lumens, CRI>70,power consumption 10-15W
MR Nos. 206.00 2025.00 4,17,150.00
max. , Constant Current electronic Driver, Color temperature
option of 6500K with all accessories as per Luster / Philips as
per Interior design.
e Supply, installation, testing and commissioning of LED Based
LED Bulkhead with High Pressure Die Cast Aluminium Body
provided with Polycarbonate cover, System Lumen Package of
600 lm and a maximum System Wattage of 10 Watts, Ingress
MR Nos. 11.00 1665.00 18,315.00
Protection Rating of IP66 and IK Rating of IK09, Operating
Voltage Range of 120-277V AC as per Luster / Philips as per
Interior design...,
f Supply, installation, testing and commissioning of Flexible
Non Waterproof. 15W Led Strip (5 meter) Light with driver as
MR Nos. 9.00 2565.00 23,085.00
per Lustre item No. Li-42002-15 / Philips as per Interior design.
g Supply, installation, testing and commissioning of Hanging
Light as per Lustre item No. Li-3424/1 1xGLS/RetrofitCFL/LED
MR Nos. 12.00 4104.00 49,248.00
E-27,Spun Aluminium Housing Top Plate, Make Luster /
Philips as per Interior design.
h Supply installation, testing and commissioning of Wall Light as
per Lustre Item No. Li-3314/1W-1XGLS/Retrofit CFL/LED-B-22
MR Base & Arm Made of Brass Casting,Span Brass Holder Cap, Nos. 9.00 5850.00 52,650.00
Glass Diffuser. Make Luster / Philips as per Interior design.
Supply, Installation, Testing and Commissioning of AC 230/250
volts, 50 HZ exhaust fan including providing nuts, bolts,
16 MR mounting frame, Louvers shutters and other accessories etc.
Complete as per interior design
250 mm to 300mm sweep minimum1250 rpm (4-5 star) Nos 5.00 2205.00 11,025.00
2/5 Int Electrical_BOQ (3)
S.No DSR 2018 DESCRIPTION UNIT QTY RATE AMOUNT
Supply, Installation, Testing and Commissioning of 1200 mm
sweep, BEE 5 star rated, ceiling fan with Brush Less Direct
Current (BLDC) Motor, class of insulation: B, 3-4 nos. blades,
30 cm long down rod, 2 nos. canopies, shackle kit, safety rope,
copper winding, Power Factor not less than 0.9, Service Value
(CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350
RPM (tolerance as per IS : 374-2019), THD less than 10%,
remote or electronic regulator unit for speed control and all
remaining accessories including safety pin, nut bolts, washers,
17 MR Each 93.00 2925.00 2,72,025.00
temperature rise=75 degree C (max.), insulation resistance
more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase
AC Supply, earthing etc. complete as required. 3 / 4 aluminium
blade BLDC ceiling fan BEE 5 Star Rating as per IS 374:2019,
Service Value-7.10m3/ Min (At turbo Speed)/ 28 to 31Watt full
load power at turbo speed. 220m3/min air delivery at turbo
speed as per interior design
18 Supplying and fixing of GI box of following size modules,
alongwith modular base & cover plate for modular switches in
recess etc as required.
1.27.1 1 or 2 Module (75mmX75mm) No 45.00 243 10,935.00
19 1.53 Supply and drawing of UTP 4 pair Cat 6 LAN cable in the
existing surface/recessed PVC conduit as required.
1.53.1 one run mtrs 135.00 49 6,615.00
20 Supply & fixing of Faceplate for Flush / Surface Mount
Information Outlets Single Aperture with screw hole covers &
Icon Tree Size 86mmX86mm
MR Single Aperture no 27.00 250 6,750.00
21 1.19 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm
solid copper conductor PE insulated, shielded with fine tinned
copper braid and protected with PVC sheath in the existing mtrs 90.00 33 2,970.00
surface/ recessed steel/ PVC conduit as required
22 Supplying and fixing following modular switch/ socket on the
existing modular plate & switch box including connections but
excluding modular plate etc as required.
1.24.7 TV antenna socket outlet No 2.00 119 238.00
Telephone socket outlet No 5.00 105 525.00
Supplying and drawing following pair 0.5 mm dia FRLS
PVCinsulated annealed copper conductor, unarmored
telephone cable in the existing surface/ recessed steel/ PVC
conduit asrequired
2 Pair mtrs 45 18 810.00
24 Automatic Sanitary Napkin Incinerator Machine
Type of fitting - Wall Mounted & Floor Mounting
Napkin Size for Loading - Any size (S,M,L)
Capacity - Burn 80 Napkins Per day
Input Power Supply - 230 V 15 Amp | Provided with Auto Power Off
Residue Ash - Less them 1 mili gram per Napkin with Ash Removal
Supply, installation, testing & commissioning of 6-10w LED Spot/ Spike light,
Having minimum IP-65 and Efficacy minimum 90 Lm/W, LM6 high pressure
16 die cast aluminium housing, Glass cover mounting on Spike, clip and surface No 23 1848.00 41,580.00
as requiredwith complete accessories.(CAT REF : Philips - LED Spot /
Kaselec or eq)
TOTAL carried forward to Summary 2417683.8
Supplying, installation, testing & commissioning of 10
Passenger (680 Kg), Gearless type, Machine room- less
passenger lift of any of M/s OTIS, M/s Kone, M/s
Thyssenkrupp, M/s Schindler, Lifts make having contract
speed 1 m/s serving different floors in the lift shaft as per
detailed specifications as under and additional details given in
schedule of technical particulars. Provisions of General CPWD
specifications for lift works are to be followed.
Speed - 1.0 Metre/Sec.
Floor - 3 stops
Travel - 8.4 Mtr. (Approx.)
Stop & Opening - 3 Stops & 3 Openings (One side only)
Type and Position of Machinery - Gearless type, Machine
Room-less
Controller - Micro processer based AC variable voltage &
variable frequency Control
3/5 Int Electrical_BOQ (3)
S.No DSR 2018 DESCRIPTION UNIT QTY RATE AMOUNT
Automatic rescue device complete with dry maintenace free
batteries as required.
Operation - Microprocessor based Simplex Full Collective with
/ without attendant.
Power - 415 V ±10%, 3 Phase, 50 Hz. Or as per
manufacturer specifications
Car panel finish - Scrach resistant Stainless steel with side
walls Pre-laminated wooden finish as approved by Architect
Car door - Power operated centre opening horizontal sliding
stainless steel AISI441Scratch resistant
Door operation - Full Height Infra-red cross-multi beam
Landing doors - 2 panel Centre opening, stainless steel
scratch resistant at all floors. It must be fire-rated for minimum
1-Hrs and supplier must provide the certiifcate for the same
alongwith material supply.
Car operating Panel / Landing operating panel - Car
operating panel with braile symbol luminous buttons and braile
illuminated push buttons on all landing in Stainless Steel Mirror
finish.
Hand rail - Shall be SS finish fixed above 900mm from the car-
floor level on rear-wall or side wall.
Voice announcement system - In car to announce the
position of the elevetor in hoist way as the car passes or stop at
a floor served by the elevator
Intercom system - 3-way intercom
Clear Opening of Doors - 800mm x 2200mm (Wide x
Height)
Lift Car inside size - 1300 x 1350 x 2400 ( Width x depth x
height).
Size of Lift Well - 2000 x 1900 mm(Width x Depth)
Entrance -800mm
Analysed Amount No 0 1437500 0
TOTAL carried forward to Summary 0
Supply, Installation, Testing and Commissioning of on grid
Solar Photovoltaic Power Plant conforming to MNRE
specifications as amended, consisting of Mono/Poly Crystalline
silicon solar cells, net metering facility, necessary protections,
earthing, mountedon Aluminium/GI structure of suitable
strength with following components complete as required:-
a)Solar Photovoltaic Module of capacity 330Wp or above,
manufactured in India, conforming to IS14286/ IEC61215,
IS/IEC61730-Part-1, IS/ IEC61730-Part-2. Solar Photovoltaic
Module conversion efficiency shall not be less than16.5%. PV
modules used in solar power plants/systems must be warranted
for their output peak watt capacity, which should not be less
than 90% at the end of 10 years and 80% attheend of 25 years.
b)Power Conditioning Unit (PCU) of 350-800V DC Input voltage
range and 400V AC, three phase, 4 wire, 50Hz+/-2.5Hz, output
voltage suitable to generate AC Power with efficiency not less
than 97%, total harmonic distortion less than3% and suitable for
ambient temperature from 0 to 50 degreeC.
The PCU shall adjust the voltage and frequency level to suit
the Grid Voltage Frequency. c) Data Monitoring System
complete with accessories. d)Fixing of Array junction box &
Main junction box with IP65 protection and termination
arrangement for incoming and outgoing cable along with
glands, lugs and other accessories etc. as required. e)
Lightning and surge voltage protection. f) Connections & kWp 0 52481.00 0.00
Interconnections by supplying & fixing required size XLPE
insulated copper conductor 1.1kV grade armoured power and
control cables between solar modules, main power cable to grid
supply PCU unit along with supplying & fixing of necessary
channel/conduit lugs and other accessories etc. as required.
TOTAL carried forward to Summary 0.00
MAIN LT PANEL
INCOMING
4/5 Int Electrical_BOQ (3)
S.No DSR 2018 DESCRIPTION UNIT QTY RATE AMOUNT
Supply, installation, testing and commissioning of cubical type
LT switchgear suitable for 415V, 3 Phase, 4 Wire 50 Hz AC
supply system fabricated in compartmentalized design from
CRCA sheet steel of 2 mm thick for frame work and covers,
3mm thick for gland plates including cleaning & finishing
complete with 7 tank process for powder coating in approved
shade, having suitable capacity extensible type TPN Aluminium
Alloy bus bars of high conductivity, bottom base channel of MS
section not less than 100mm x 50mm x 5mm thick, fabrication
shall be done in transportable sections, entire panel shall
have a common copper earth bar of size 25mm x 5mm at the
rear with 2 Nos. earth stud, solid connections from main bus
bar to switch gears with required size of Al. bus bars and
control wiring with 2.5sq.mm. FRLS insulated copper conductor
cable, cable alleys, cable gland plates in two half, i/c providing
following 415V Switchgear and accessories in the Panel as per
SLD ,specifications complete as required (General arrangement
and schematic Drawings to be approved by the Deptt. before
start of fabrication) . The Bus bars will be as per the IEC 6068-3-
247 Standard. IP Protection-42
1 No 160 A Microprocessor Based FP MCCB, 36 KA service
breaking capacity with heavy duty solid neutral link alongwith
Earth fault relay and CBCT.Rotary handle and spreader link
1 No 160 A, 36 KA Auto changeover switch,
Metering for incoming:
Digital Multifunction meter (MFM-4) with RS-485
communication port for measurement of PF, V, A & Hz ,
equivalent to EM6459, with CT as required.
Phase indicating lamps RYB with 2 Amps SP MCB back up.
BUSBAR
Electrolytic high conductivity Aluminium three phase and neutral
busbars rated at 200 amps, 36KA, insulated with heat
shrinkable coloured PVC sleeves & clip on shrouds for joints.
Neutral Bus Bar shall be 50% of Phase Bus Bar.
OUTGOINGS
10 nos. 63 Amps 10KA FP MCB
ON / OFF indicating lamps with MCB as backup protection.
4 nos. 63 Amps thermal magnetic release 25 kA 440 volt FP
MCCB with overcurrent,earth fault and short circuit releases
each complete with:
ON / OFF indicating lamps with MCB as backup protection.
Main Panel as described as above and as per specification
complete in all respects. Set 0 2,67,848.00 0.00
5/5 Int Electrical_BOQ (3)
Govt. Girls High School, Jajpur
TOILET BLOCKS - ABSTRACT OF COST
RENOVATION OF TOILETS (COLLEGE), GOVT. GIRLS HIGH SCHOOL, JAJPUR,
ODISHA.
ABSTRACT OF COST
SL.N NON-SOR TOTAL AMOUNT
SL.N NON-SOR TOTAL AMOUNT
DESCRIPTION OF WORK SOR AMOUNT (Rs.)
O. AMOUNT (Rs.) (RS)
A CIVIL WORK :
V MARBLE & GRANITE WORK 52,558.25 - 52,558.25
VI WOOD AND P.V.C. WORK 3,25,806.74 13,320.00 3,39,126.74
VII STEEL WORK - 26,232.00 26,232.00
VIII FLOORING WORK 77,743.78 - 77,743.78
IX ROOFING WORK 47,667.96 - 47,667.96
X FINISHING WORK 1,35,508.23 - 1,35,508.23
XI GLAZING WORK - - -
XII WATER PROOFING WORK 2,03,976.48 - 2,03,976.48
TOTAL (A) 8,43,261.44 39,552.00 8,82,813.44
B PLUMBING WORK :
I SANITARY FIXTURES & CP BRASS FITTINGS - 2,09,347.12 2,09,347.12
II SOIL, WASTE, VENT & RAIN WATER PIPES - 2,10,931.01 2,10,931.01
III WATER SUPPLY SYSTEM - 31,992.57 31,992.57
TOTAL (B) - 4,52,271.00 4,52,271.00
C ELECTRICAL WORKS:
I INTERNAL ELECTRICAL WORKS 1,94,543.09 1,94,543.09
TOTAL (C) - 1,94,543.09 1,94,543.09
E TOTAL [A+B+C] = [D] 15,29,627.53
2.0 ADD GST @ 18% ON [E] 2,75,332.95
TOTAL [F] 18,04,960.48
Govt. Girls High School, Jajpur
TOILET BLOCKS - CIVIL DETAILED ESTIMATE
RENOVATION OF TOILETS (COLLEGE), GOVT. GIRLS HIGH SCHOOL, JAJPUR, ODISHA.
DETAILED ESTIMATE
SOR NON-SOR
SL.NO. SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS)
AMOUNT (RS) AMOUNT (RS)
I 1.0 MARBLE & GRANITE WORK
Providing and fixing 18 mm thick gang saw cut, mirror polished,
premoulded and prepolished, machine cut for kitchen platforms, vanity
counters, window sills, facias and similar locations of required size,
approved shade, colour and texture laid over 20 mm thick base
1 SOR cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white
cement, mixed with matching pigment, epoxy touch ups, including
rubbing, curing, moulding and polishing to edges to give high gloss
finish etc. complete at all levels.
Granite of any colour and shade
Area of slab over 0.50 sqm sqm 7.20 2837.60 20430.72
Providing edge moulding to 18 mm thick marble stone counters,
Vanities etc., including machine polishing to edge to give high gloss
finish etc. complete as per design approved by Engineer-in-Charge.
Granite work metre 0.00 295.00 0.00
Extra for fixing marble /granite stone, over and above corresponding
basic item, in facia and drops of width upto 150 mm with epoxy resin
3 SOR metre 0.00 253.60 0.00
based adhesive, including cleaning etc. complete.
Extra for providing opening of required size & shape for wash basin/
kitchen sink in kitchen platform, vanity counter and similar location in
4 SOR marble/ Granite/ stone work, including necessary holes for pillar taps each 6.00 404.10 2424.60
etc. including moulding, rubbing and polishing of cut edges etc.
complete.
Fixing tiles/Marbles in dados skirting and risers of step on 12mm thick
cement plaster (1:3) jointed with neat cement slurry mixed with
pigment to match the shades of the tiles etc. complete.
Vitrified Tile 600mmx600mm Coloured / Printed series
a Ground Floor sqm 31.19 952.20 29702.93
TOTAL MARBLE & GRANITE WORK 52558.25 0.00
II 2.0 WOOD AND P.V.C. WORK
Providing and fixing factory made single extruded WPC (Wood
Polymer Composite) solid door/window/Ceosetory window s & other
Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60
(Suspension Grade), calcium carbonate and natural fibers (wood
powder/ rice husk/wheat husk) and non tox ic additives (maximum
toxicity index of 12 for 100 gms) fabricated with miter jo ints after
applying PVC solvent cement and screwed with full body threaded
star headed SS screws having minimum f rame density of 750
kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge)
, minimum compressive strength of 58 N/mm2, modulus of elast
icity 900 N/mm2 and resistance to spread of flame of Class A
6 SOR category with property of being termite/borer proof, water/moisture
proof and fire retardant and fixed in position with M.S hold fast/lugs/SS
dash fa steners of required dia and length complete as per direction of
Engineer-In - Charge . (M.S hold fast/lugs or SS dash fasteners shall
be paid for separate ly).
Note: For WPC solid door/window frames , minus 5mm tolerance in
dimensions i.e. depth and width of profile shall be acceptable .
Variation in profile dimensions on plus side shall be acceptab le but no
extra payment on this account shall be made
Supplying, fitting and fixing well dressed and well seasoned sal wood
choukaths framed and fixed including two coats coats of coaltaring to
wall and lintel side faces of choukaths including cost of coaltar and
labour for coaltaring and fixing required nos. of W.I. clamps to the
choukaths with approved qualities of screws including cost,
conveyance, loading required for the work etc. complete in all respect metre 59.70 1286.90 76827.93
with cost, conveyance, royalties, loading, unloading and taxes of all
materials and cost of all labour, T&P, sundries, scaffolding etc.
required for the work complete in all respect as per specification and
direction of Engineer in Charge
B1 - Page 1 of 6 For Niche Architects
Govt. Girls High School, Jajpur
TOILET BLOCKS - CIVIL DETAILED ESTIMATE
RENOVATION OF TOILETS (COLLEGE), GOVT. GIRLS HIGH SCHOOL, JAJPUR, ODISHA.
DETAILED ESTIMATE
SOR NON-SOR
SL.NO. SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS)
AMOUNT (RS) AMOUNT (RS)
Providing and fixing ISI marked flush door shutters conforming to IS : 2202
(Part I) non-decorative type, core of block board construction with frame of 1st
7 SOR class hard wood and well matched commercial 3 ply veneering with vertical
grains or cross bands and face veneers on both faces of shutters:
35 mm thick including ISI marked Stainless Steel butt hinges with necessary
screws
Extra for providing lipping with 2nd class teak wood battens 25 mm
8 SOR minimum depth on all edges of flush door shutters (over all area of sqm 21.60 345.00 7452.00
door shutter to be measured).
Providing and fixing wooden moulded beading to door and window
9 SOR frames with iron screws, plugs and priming coat on unexposed surface
etc. complete :
2nd class teak wood
50 x 20 mm metre 52.20 169.66 8856.25
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to
frame with 10 mm diameter bolts, nuts and wooden plugs and
10 SOR embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement each 54.00 112.50 6075.00
: 3 coarse sand : 6 graded stone aggregate 20mm nominal size).
Door Hardware
dormakaba BB 4330, 5 Knuckle, 2 Ball bearing butt hinges size 4" x 3"
11 MR x 3mm, in SS 304 and in SSS finish. Suitable for door weights upto each 36.00 312.00 11232.00
120kgs. Template Drilled
dormakabakaba ML 550S Digital Mortise lock in standard design
accessible by Fingerprint (100 nos.), RFID (100 Nos.), PIN (4 Nos.),
BLE (10 mobiles), Mechanical Keys (3 nos.). Emergency Power:
12 MR each 0.00 41861.00 0.00
external 9VDC alkaline battery. Mortise lock in Black with Bright
Chrome Rim finish. Remote Control (optional)
dormakaba floor stop half dome with 45mm dia with fixing accessories,
13 MR each 9.00 232.00 2088.00
in satin Chrome
Providing and fixing aluminium die cast body tubular type universal
hydraulic door closer (having brand logo with ISI, IS : 3564, embossed
14 SOR on the body, door weight upto 35 kg and door width upto 700 mm), each 0.00 832.30 0.00
with necessary accessories and screws etc. complete.
Providing & Fixing decorative high pressure laminated sheet of plain /
wood grain in gloss / matt/ suede finish with high density protective
15 SOR surface layer and reverse side of adhesive bonding quality conforming
to IS : 2046 Type S, including cost of adhesive of approved quality.
1.0 mm thick sqm 43.20 693.36 29953.15
Providing and fixing factory made uPVC white colour fixed glazed
windows/ventilators comprising of uPVC multi-chambered frame and
mullion (where ever required) extruded profiles duly reinforced with
1.60 ± 0.2 mm thick galvanized mild steel section made from roll
forming process of required length (shape & size according to uPVC
profile), uPVC extruded glazing beads of appropriate dimension,
EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to
finished wall, plastic packers, plastic caps and necessary stainless
steel screws etc. Profile of frame shall be mitred cut and fusion welded
at all corners, mullion (if required) shall be also fusion welded including
drilling of holes for fixing hardware's and drainage of water etc. After
16 MR fixing frame the gap between frame and adjacent finished wall shall be
filled with weather proof silicon sealant over backer rod of required size
and of approved quality, all complete as per approved drawing &
direction of Engineer-in-Charge. (Single / double glass panes and
silicon sealant shall be paid separately).
Note: For uPVC frame, sash and mullion extruded profiles minus 5%
tolerance in dimension i.e. in depth & width of profile shall be
acceptable. Variation in profile dimension in higher side shall be
accepted but no extra payment on this account shall be made.
Fixed window / ventilator made of (small series) frame 47 x 50 mm &
mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and
single glazing bead of appropriate dimension. (Area upto 0.75 sqm.)
B1 - Page 2 of 6 For Niche Architects
Govt. Girls High School, Jajpur
TOILET BLOCKS - CIVIL DETAILED ESTIMATE
RENOVATION OF TOILETS (COLLEGE), GOVT. GIRLS HIGH SCHOOL, JAJPUR, ODISHA.
DETAILED ESTIMATE
SOR NON-SOR
SL.NO. SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS)
AMOUNT (RS) AMOUNT (RS)
Providing and fixing factory made uPVC white colour sliding glazed
window upto 1.50 m in height dimension comprising of uPVC multi-
chambered frame with in-built roller track and sash extruded profiles
duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section
made from roll forming process of required length (shape & size
according to uPVC profile), appropriate dimension of uPVC extruded
glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile,
zinc alloy (white powder coated) touch locks with hook, zinc alloy body
with single nylon rollers (weight bearing capacity to be 40 kg), G.I
fasteners 100 x 8 mm size for fixing frame to finished wall and
necessary stainless steel screws etc. Profile of frame & sash shall be
mitred cut and fusion welded at all corners, including drilling of holes
17 MR for fixing hardware's and drainage of water etc. After fixing frame the
gap between frame and adjacent finished wall shall be filled with
weather proof silicon sealent over backer rod of required size and of
approved quality, all complete as per approved drawing & direction of
Engineer-in-Charge. (Single / double glass panes, wire mesh and
silicon sealent shall be paid separately)
Note: For uPVC frame and sash extruded profiles minus 5% tolerance
in dimension i.e. in depth & width of profile shall be acceptable.
Variation in profile dimension in higher side shall be accepted but no
extra payment on this account shall be made.
B1 - Page 3 of 6 For Niche Architects
Govt. Girls High School, Jajpur
TOILET BLOCKS - CIVIL DETAILED ESTIMATE
RENOVATION OF TOILETS (COLLEGE), GOVT. GIRLS HIGH SCHOOL, JAJPUR, ODISHA.
DETAILED ESTIMATE
SOR NON-SOR
SL.NO. SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS)
AMOUNT (RS) AMOUNT (RS)
Three track three panels sliding window with fly proof SS wire mesh
(Two nos. glazed & one no. wire mesh panels) made of (small series)
frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of sqm 3.75 8621.36 32330.09
1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area
of window upto 1.75 sqm).
TOTAL WOOD AND P.V.C. WORK 325806.74 13320.00
III 3.0 STEEL WORK
Steel work in built up tubular/built up sections/ framed work, (round,
square or rectangular hollow tubes etc.) trusses etc., including
18 MR chequered plates, cutting, hoisting, fixing in position and applying a
priming coat of approved steel primer, including welding and bolted
with special shaped washers etc. complete.
Electric resistance or induction butt welded tubes kg 240.00 109.30 26232.00
Providing & fixing fly proof wire gauze to windows, clerestory windows
19 MR & doors with M.S. Flat 15x3 mm and nuts & bolts complete.
Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm
aperture on both sides
TOTAL STEEL WORK 0.00 26232.00
IV 4.0 FLOORING WORK
Providing and laying Polished Granite stone flooring in required design
and patterns, in linear as well as curvilinear portions of the building all
complete as per the architectural drawings with 18 mm thick stone slab
over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4
20 SOR coarse sand) laid and jointed with cement slurry and pointing with white
cement slurry admixed with pigment of matching shade including
rubbing , curing and polishing etc. all complete as specified and as
directed by the Engineer-in-Charge.
Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat
Eye or equivalent.
a Ground Floor sqm 10.88 2575.40 28007.48
b First Floor sqm 0.00 3019.70 0.00
LAMINATE PANELING: P/F of wooden Sound proof paneling made
using frame work of Gyproc make Standard floor / Stud sections 2’
C/C fixed to walls using standard PVC sleeves / screw, to be covered
with 12 MM ply (make ………), space between wall and ply to be filled
21 MR sqm 6607.00 0.00
with glass wool 3’th in fiber mesh. Facia to be covered with 1 mm
laminate (make…….) as per drawing and design. Rates to be inclusive
of all material, labor, wastage hardware T&P etc.
Supplying, fitting ,fixing vitrified tile of ( Printed ) in floors of size
600mmx600mm of approved make conferming to IS:13755 laid on
20mm thick cement mortar (1:4) (1 cement:4 sand) and filling joints
22 SOR with white cement of approved quality including cost of all
materials,labour T&P etc required for the work all complete as per the
direction of Engineer-in-charge.
d Terrace sqm 50.10 941.50 47169.15
Fixing tiles/Marbles in dados skirting and risers of step on 12mm thick
cement plaster (1:3) jointed with neat cement slurry mixed with
pigment to match the shades of the tiles etc. complete.
Granite tiles (above 0.40 Sqm. 20mm thick.)
a Ground Floor sqm 1.09 2360.60 2567.15
b First Floor sqm 0.00 2391.60 0.00
TOTAL FLOORING WORK 77743.78 0.00
V 5.0 ROOFING WORK
B1 - Page 4 of 6 For Niche Architects
Govt. Girls High School, Jajpur
TOILET BLOCKS - CIVIL DETAILED ESTIMATE
RENOVATION OF TOILETS (COLLEGE), GOVT. GIRLS HIGH SCHOOL, JAJPUR, ODISHA.
DETAILED ESTIMATE
SOR NON-SOR
SL.NO. SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS)
AMOUNT (RS) AMOUNT (RS)
Providing and laying Manglore tiles 400mm x 250mm including
preparation of surface as required for treatment of sloping roofs
consisting of following operations:
(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of
cement admixed with water proofing compound conforming to
IS. 2645 and approved by Engineer-in-charge over the RCC
MR slab including adjoining walls upto 300 mm height including sqm 51.30 929.20 47667.96
cleaning the surface before treatment.
(b) Laying Manglore tiles with mortar 1:4 (1 cement : 4 coarse
sand) admixed with water proofing compound conforming to IS :
2645 and approved by Engineer-in-charge.
TOTAL ROOFING WORK 47667.96 0.00
VI 6.0 FINISHING WORK
6 mm thick cement plaster (1:4) to R CC surfaces finished smooth
24 SOR including closed deep chiping and slury treatment. Per 1 Sqm sqm 502.50 157.00 78892.50
Providing and applying plaster of paris putty of 2 mm thickness over
25 SOR plastered surface to prepare the surface even and smooth complete. sqm 58.80 244.80 14394.30
Finishing walls with textured exterior paint of required shade :New work
(Two or more coats applied @ 3.28 ltr/10 sqm) over and including
26 SOR priming coat of exterior primer applied @ 2.20kg/10 sqm sqm 159.60 204.70 32670.12
Painting two coats to the wall surface by using 100% premium Acrylic
emulsion paint to interior wall surface over a coat of primer with
water bond cement primer after preparing the surface smooth by
27 SOR sqm 58.80 78.08 4591.15
applying putty punning with Synthetic Acrylic wall putty including
finishing the surface smooth by sand papering in all heights etc.
complete in all respect.
Applying priming coats with primer of approved brand and
manufacture, having low VOC (Volatile Organic Compound ) content.
28 13.85 With ready mixed pink or grey primer on wood work (hard and soft sqm 15.86 69.59 1103.30
wood) having VOC content less than 50 grams/ litre
Providing and injecting approved grout in proportion recommended by
the manufacturer into cracks/honey-comb area of concrete/ masonry
DSR by suitable gun/pump at required pressure including cutting of nipples
29 analysis after curing etc. complete as per directions of Engineer-in- Charge.
26.35 (The payment shall be made on the basis of actual weight of approved
grout injected.)
26.35.1 Stirrer mixed Acrylic Polymer of approved make @ 2% of
weight of cement used) modified Cement slurry made kg 37.50 102.85 3856.88
with non shrink compound in concrete/RCC work
TOTAL FINISHING WORK 135508.23 0.00
VII 7.0 GLAZING WORK
TOTAL ALUMINIUM WORK 0.00 0.00
VIII 8.0 WATER PROOFING WORK
B1 - Page 5 of 6 For Niche Architects
Govt. Girls High School, Jajpur
TOILET BLOCKS - CIVIL DETAILED ESTIMATE
RENOVATION OF TOILETS (COLLEGE), GOVT. GIRLS HIGH SCHOOL, JAJPUR, ODISHA.
DETAILED ESTIMATE
SOR NON-SOR
SL.NO. SOR/MR DESCRIPTION OF WORK UNIT QTY. RATE (RS)
AMOUNT (RS) AMOUNT (RS)
Providing and laying integral cement based water proofing treatment
including preparation of surface as required for treatment of roofs,
balconies, terraces etc consisting of following operations:
(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement
admixed with water proofing compound conforming to IS. 2645 and
approved by Engineer-in-charge over the RCC slab including adjoining
walls upto 300 mm height including cleaning the surface before
treatment.With average thickness of 120 mm and minimum thickness
at khurra as 65 mm.
(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm
to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse
sand) admixed with water proofing compound conforming to IS : 2645
and approved by Engineer-in-charge over 20 mm thick layer of cement
mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water
30 SOR proofing compound conforming to IS : 2645 and approved by Engineer- sqm 143.33 1423.10 203976.48
in-charge to required slope and treating similarly the adjoining walls
upto 300 mm height including rounding of junctions of walls and slabs.
(c) After two days of proper curing applying a second coat of cement
slurry using 2.75 kg/ sqm of cement admixed with water proofing
compound conforming to IS : 2645 and approved by Engineerin-
charge.
(d) Finishing the surface with 20 mm thick jointless cement mortar of
mix 1:4 (1 cement :4 coarse sand) admixed with water proofing
compound conforming to IS : 2645 and approved by Engineerin-
charge including laying glass fibre cloth of approved quality in top layer
of plaster and finally finishing the surface with trowel with neat cement
slurry and making pattern of 300x300 mm square 3 mm deep.
(e) The whole terrace so finished shall be flooded with water for a
minimum period of two weeks for curing and for final test.“All
TOTAL WATER PROOFING WORK 203976.48 0.00
B1 - Page 6 of 6 For Niche Architects
Govt. Girls High School, Jajpur
TOILET BLOCKS - PLUMBING DETAILED ESTIMATE
RENOVATION OF TOILETS (COLLEGE), GOVT. GIRLS HIGH SCHOOL, JAJPUR, ODISHA.
PLUMBING DETAILED ESTIMATE
Amount
S. No. DSR 2021 Description of Item Unit Qty Rate
DSR 2021 NSR
Sanitary Fixtures & CP Brass Fittings
1.0 17.78. Providing and fixing white vitreous china extended wall
mounting water closet of size of approved shape including
providing & fixing white vitreous china cistern with dual flush
fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/
8 litres), including seat cover, and cistern fittings, nuts, bolts
and gasket etc complete.
2.0 MR Providing and fixing in position best indian Health Faucet
with 8mm dai 1 meter long Flaxible Tube and wall bracket Each 12 2250.00 27000
with N. R. V. (nonreturn wall).
3.0 DSR-17.7A Providing and fixing wash basin with C.I. brackets, 15 mm
dia CP Brass single hole basin mixer of approved quality
and make, including painting of fittings and brackets, cutting
and making good the walls wherever required:-
3.1 a White Vitreous China Wash basin size 550x400 mm with a
15 mm C.P. brass single hole basin mixer. Each 6 2973.05
4.0 17.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen
sink with mat finish as per IS 13983 with C.I. brackets and
stainless steel plug 40 mm including painting of fittings and
brackets, cutting and making good the walls wherever
required :
4.1 17.10.1.3 Kitchen sink with drain board 510x1040 mm, bowl depth
200mm. Each 0 5394.22
5 DSR-17.22B Providing and fixing CP Brass Single lever telephonic wall
mixer of quality & make as approved by Engineer in charge.
5.1 (a) 15 mm nominal dia Each 6 5259.41 31556.46
6 17.22A Providing and fixing CP Brass 32mm size Bottle Trap of
approved quality & make and as per the direction of 4570.38
Engineer-in-charge. Each 6 761.73
7 17.34 Providing and fixing toilet paper holder :
17.34.1 C.P. brass Each 12 585.15 7021.8
8 18.22 Providing and fixing C.P. brass shower rose with 15 or 20
mm inlet :
8.1 18.22.1 100 mm diameter Each 0
9 18.49 Providing and fixing C.P. brass bib cock of approved quality
conforming to IS:8931 :
9.1 18.49.1 15 mm nominal bore Each 6 373.19 2239.14
B3 - Page 1 of 5 For Niche Architects
Govt. Girls High School, Jajpur
TOILET BLOCKS - PLUMBING DETAILED ESTIMATE
Amount
S. No. DSR 2021 Description of Item Unit Qty Rate
DSR 2021 NSR
10 18.51 Providing and fixing C.P. brass long body bib cock of
approved quality conforming to IS standards and weighing
not less than 690 gms.
10.1 18.51.1 15 mm nominal bore Each 6 608.87 3653.22
11 18.53 Providing and fixing C.P. brass angle valve for basin mixer
and geyser points of approved quality conforming to IS:8931
11.1 18.53.1 15 mm nominal bore Each 1 430.05 430.05
12 DSR-18.53A Providing and fixing C.P. Brass extension nipple (size
15mmx50mm) of approved make and quality as per 371.21
direction of Engineer-in-charge. Each 7 53.03
13 18.65 Providing and fixing PTMT soap Dish Holder having length
breadth 102mm, height of 75mm with concealed fitting 498.96
arrangements,
weighing not less than 106 gms Each 6 83.16
14 17.72 Providing and fixing PTMT towel ring trapezoidal shape 215
mm long,200 mm wide with minimum distances of 37 mm
from wall face withconcealed fittings arrangement of 1055.64
approved quality and colour, weighing not less than 88 gms
15 17.73 Providing and fixing PTMT towel rail complete with brackets
fixed to
wooden cleats with CP brass screws with concealed fittings
arrangement of approved quality and colour
16 17.73.1 450 mm long towel rail with total length of 495 mm, 78 mm
wide and effective height of 88 mm, weighing not less than 2958.06
170 gms Each 6 493.01
17 17.71 Providing and fixing PTMT liquid soap container 109 mm
mm high and 112 mm distance from wall of standard shape
bracket of the same materials with snap fittings of approved
quality
and colour, weighing not less than 105 gms. Each 6 125.74
B3 - Page 2 of 5 For Niche Architects
Govt. Girls High School, Jajpur
TOILET BLOCKS - PLUMBING DETAILED ESTIMATE
Amount
S. No. DSR 2021 Description of Item Unit Qty Rate
DSR 2021 NSR
18 Providing and fixing vertical storage type hot water heater
fixed to wall with anchor bolts & nuts, 15mm CP brass angle
stop cock and 15mm CP brass non-return valve complete
including making connections with 15mm dia CP connecting
pipes on inlet and outlet, suitable length of power cable and
15 amps plug.
18.1 NS-9 Capacity15Litres Venus Model Magma 25GV Each 1 12500.00 12500
19 NS Providing and fixing 15mm C.P brass Sink MixerJaguar
Model. No. FLR-5165 or approvedequivalent.) for kitchen
sink with swinging spout complete. Including cutting and
making good the walls wherever required . Each 0 4500.00
20 Female Urinal Pot. (14''X17''X04'') Premium Designer
Luxurious Ceramic Floor Mount Urinal Pot for Ladies /
Female / Girls / Women Toilet / Bathroom / Washroom
(IVORY) Each 6 4945.00
Total C/F to Summary 209347.12
SOIL, WASTE & VENT AND RAIN WATER PIPES AND
FITTINGS
20 4.1 Providing and laying in position cement concrete of specified
grade excluding the cost of centring and shuttering. All work
up to plinth.
20.1 4.1.3 1:2:4 ( 1cement : 2 Coarse sand : 4 graded stone aggregate
20 mm nominal size ) Cum 2 6330.35
21 DSR-12.22 Making khurras 45x45 cm with average minimum thickness
of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4
graded stone aggregate of 20 mm nominal size) over P.V.C.
sheet 1mx1mx400micron, finished with 12mm cement 229.14
plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat
cement, rounding the edges and making and finishing the
outlet complete. Each 1 229.14
B3 - Page 3 of 5 For Niche Architects
Govt. Girls High School, Jajpur
TOILET BLOCKS - PLUMBING DETAILED ESTIMATE
Amount
S. No. DSR 2021 Description of Item Unit Qty Rate
DSR 2021 NSR
22.0 DSR-12.44 Providing and fixing to the inlet mouth of rain water pipe cast
iron grating 15 cm diameter and weighing not less than 440 41.17
grams. Each 1 41.17
23.0 NS Providing and fixing 110 mm dia PVC floor trap moulded
EXTENTION PIECE (Height Riser) having 3 nos. boss inlets
suitable for 50 and 40 mm pipe connections, jointing and
dripseal all complete as per standard detail.
24.0 NS Providing and fixing floor drain points formed out of UPVC
110 X 50 mm dia reducer with suitable extension piece
including cost of cutting and making good the walls and
floors wherever required.
25 NS Providing and fixing C.P JALI 125 mm X 125 mm square
vertical grating fixed in wall / floor for tarrace rain water NOS 300.00 0
outlet, complete work.
26 NS Providing, jointing and fixing UPVC Soil, Waste and Vent
pipes of approved make conforming to IS : 13592 Class B, 6
kg/cm2 pressure including fittings and specials, i.e. bends,
tees, crosses, access pieces, adaptors for connections to
other materials, plugs, reducers, cowls, offsets, etc.in pipe
ducts , sunken floors, under slung from ceiling and jointing
with epoxy based sealant-`Dripseal`, Pipes may be laid/
fixed in pipe ducts, sunken floors, under slung from ceiling.
The pipes shall be laid to
26.10 63 mm dia M 30 600.00 18000
26.20 110 mm dia M 240 750.00 180000
27 NS-26 Providing and fixing in position 110x63 mm dia uPVC
reducing elbow including fix to floor with cement mortar. Each 0 151.00
28 NS-27 Providing and fixing 100 mm dia GI inlet fitting/ Extension
Piece with 2 or 3 inlets of 32 to 50 mmdia, fixed to CI trap
with lead joint and set in cement concrete as per drawing
complete. Each 0 906.00
29 NS-28 Providing and fixing in position 125x125 mm stainless steel
grating for floor trap/floor drain including fix to floor with 0
cement mortar. Each 0 280.00
Total C/F to Summary 0.00 210931.01
Water Supply System
30 DSR-18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)
pipes, having thermal stability for hot & cold water supply,
including all CPVC plain & brass threaded fittings, i/c fixing
the pipe with clamps at 1.00 m spacing. This includes
jointing of pipes & fittings with one step CPVC solvent
cement and the cost of cutting chases and making good the
same including testing of joints complete as per direction of
Engineer in Charge
Concealed work including cutting chases and making good
the walls etc.
30.1 18.8.1 15 mm nominal outer dia .Pipes. Metre 30 379.17 11375.10
30.2 18.8.2 20 mm nominal outer dia .Pipes. Metre 30 441.57 13247.10
31 DSR-18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)
pipes, having thermal stability for hot & cold water supply
including all CPVC plain & brass threaded fittings This
includes jointing of pipes & fittings with one step CPVC
solvent cement, trenching, refilling & testing ofjoints
complete as per direction of Engineer in Charge
Internal work - Exposed on wall
31.1 18.9.1 15 mm dia nominal bore Metre 0 0.00
31.2 18.9.2 20 mm dia nominal bore Metre 7.5 236.58 1774.35
B3 - Page 4 of 5 For Niche Architects
Govt. Girls High School, Jajpur
TOILET BLOCKS - PLUMBING DETAILED ESTIMATE
Amount
S. No. DSR 2021 Description of Item Unit Qty Rate
DSR 2021 NSR
32 DSR-18.17 Providing and fixing gun metal gate valve with C.I. wheel of
approved quality (screwed end) :
32.1 18.17.1A 20 mm dia nominal bore Each 3 395.54 1186.62
32.2 18.17.1 25 mm dia nominal bore Each 3 427.30 1281.90
33 18.48 Providing and placing on terrace (at all floor levels)
polyethylene water
storage tank, IS : 12701 marked, with cover and suitable
locking 3127.50
arrangement and making necessary holes for inlet, outlet
and overflow
pipes but without fittings and the base support for tank. per litre 375 8.34
Total C/F to Summary 0.00 31992.57
B3 - Page 5 of 5 For Niche Architects
Govt. Girls High School, Jajpur
TOILET BLOCKS - ELECTRICAL DETAILED ESTIMATE
RENOVATION OF TOILETS (COLLEGE), GOVT. GIRLS HIGH SCHOOL, JAJPUR, ODISHA.
ELECTRICAL DETAILED ESTIMATE
S.No DSR 2018 DESCRIPTION UNIT QTY RATE AMOUNT
Wiring for light point/ fan point/ exhaust fan point/ call bell point
with 1.5 sq.mm FRLS PVC insulated copper conductor single core
cable in surface / recessed medium class PVC conduit,with
1 1.10 modular switch, modular plate, suitable GI box and earthing the Point 13.50 596.49 8,052.62
point with 1.5 sq.mm FRLS PVC insulated copper conductor single
core cable etc. as required. (Group-A)
Wiring for light /power plug with 2 x 4 Sq.mm. FRLS PVC
insulated, copper conductor single core cable in surface /
2 1.12 recessed medium class PVC conduit along with 1 no. 4 Sq.mm m 105.00 171.90 18,049.50
FRLS PVC insulated copper conductor single core cable for loop
earthing as required.
Wiring for circuit / submain wiring alongwith earth wire with
the following sizes of FRLS PVC insulated, copper conductor
single core cable in surface/ recessed medium class PVC conduit
as required.
3.1 1.14.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire. m 27.00 143.54 3,875.58
3.2 1.14.4 2 x 6 sq.mm. + 1 x 6 sq.mm. Earth wire m 13.50 214.02 2,889.27
3.3 1.14.11 4 x 16 sq.mm. + 2 x 6 sq.mm. Earth wire m 52.50 646.34 33,932.85
1.21 Supply and fixing of following sizes of medium class PVC conduit
along with accessories in surface/recess including cutting the wall
and making good the same in case of recessed conduit as
required.
1.31 Supply and fixing of suitable size GI box with modular plate and
cover in front on surface or in recess including providing and
fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps. modular
switch, connection etc. as required.
1.32 Supply and fixing of suitable size GI box with modular plate and
cover in front on surface or in recess, including providing and
6 fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 Each 4.00 425.45 1,701.80
amps. modular switch, connection etc. as required.
1.25 Supply and fixing two module stepped type electronic fan
7 regulator on the existing modular plate switch box including Each 0.00 293.95 0.00
connections but excluding modular plate etc. as required.
B5 - Page 1 of 5 For Niche Architects
Govt. Girls High School, Jajpur
TOILET BLOCKS - ELECTRICAL DETAILED ESTIMATE
RENOVATION OF TOILETS (COLLEGE), GOVT. GIRLS HIGH SCHOOL, JAJPUR, ODISHA.
DISTRIBUTION BOARDS & MCB's
Supplying and fixing 5 amps. to 32 amps. rating, 240/415 V,
10kA, "C" curve, miniature circuit breaker (MCB) suitable for
8 2.10 inductive load of following poles in the existing MCB DB
complete with connections, testing and commissioning etc. as
required.
2.10.1 single pole Each 4.00 171.04 684.16
2.4 Supplying and fixing following way, horizontal type three pole
and neutral, sheet steel, MCB distribution board, 415 V, on
surface/ recess, complete with tinned copper bus bar, neutral
bus bar, earth bar, din bar, interconnections, powder painted
including earthing etc. as required. (But without MCB/RCCB/
Isolator)
2.4.3 8 way, Double door Each 1.00 3954.56 3,954.56
10 2.15 Supplying and fixing following rating, four pole, (three phase and
neutral), 415 volts, residual current circuit breaker (RCCB), having
a sensitivity current upto 300 milliamperes in the existing MCB DB
complete with connections, testing and commissioning etc. as
required.
2.15.3 63 amps Each 0.00 2,386.83 0.00
1.57 Supplying & fixing suitable size GI box wih modular plate and
cover in front on surface or in recess including providing and
11 fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" EACH 9.00 549.22 4,942.98
curve including connections, painting etc. as required
12 5.15 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in
recess for connections etc. as required.(Make-Obo/ Aps)
13 5.18 Providing and fixing 6 SWG dia G.I. wire on surface or in recess
for loop earthing along with existing surface / recessed conduit /
submain wiring / cable as required. (Make-Obo/ Aps)
B5 - Page 2 of 5 For Niche Architects
Govt. Girls High School, Jajpur
TOILET BLOCKS - ELECTRICAL DETAILED ESTIMATE
RENOVATION OF TOILETS (COLLEGE), GOVT. GIRLS HIGH SCHOOL, JAJPUR, ODISHA.
14 MR Supply, installation, testing and commissioning of advance
maintenance free Chemical Gel GI Earthing of JK Chem rode
copper of 3mtr long 50mm dia CHEMRODE filled with highly
conducting metallic compounds with the permanent sealings at
both the ends with compressed at the top along with 50 Kgs of
RESLOW mixture of Resistance Lowering Grounding Minerals.
The loss on ignition by mass of the chemical compound shall be
less than 22%. The chemical compound should be tested and
certified by any International accredited and BIS (Bureau of Indian
Standards) accredited laboratory. The chemical earth electrode
manufacturer shall be an ISO 9001:2015 & ISO 14001:2015
certified organization. The Earth pit should be covered with heavy
duty polyplastic weather proof chamber. Make-APS/ JK / OBO
LIGHTING FIXTURES & FANS
Supply, installation, testing and commissioning of wall / ceiling /
LED light luminaires with all accessories as per standard item etc
complete as required as per the standard catalogue item.
a Supply, installation, testing and commissioning of Aluminium,
CRC Sheet base,mild steel arm, SS Finish, Acrylic diffuser, 5W
MR Nos. 0.00 1,665.00 0.00
Led Picture Light as per Lustre item No. Li-36001-5/ Philips as per
Interior design.
b Supply, installation, testing and commissioning of Aluminium,
CRC Sheet base,mild steel arm, SS Finish, Acrylic diffuser, 20W
MR Nos. 0.00 3,285.00 0.00
Led Picture Light as per Lustre item No. Li-36004-20 / Philips as
per Interior design..
c Supply, installation, testing and commissioning of COB based
down light, Housing made of Cast aluminum, power coated, Acrylic
MR Nos. 0.00 3,168.00 0.00
diffuser.16W Led Down Light as per Lustre item No. Li-14035-16/
Philips as per Interior design..
B5 - Page 3 of 5 For Niche Architects
Govt. Girls High School, Jajpur
TOILET BLOCKS - ELECTRICAL DETAILED ESTIMATE
RENOVATION OF TOILETS (COLLEGE), GOVT. GIRLS HIGH SCHOOL, JAJPUR, ODISHA.
d Supply, installation, testing and commissioning of Surface
mounted LED downlighter(round shape) with lumen output
minimium 1000 lumens, CRI>70,power consumption 10-15W max.
MR Nos. 13.00 2,025.00 26,325.00
, Constant Current electronic Driver, Color temperature option of
6500K with all accessories as per Luster / Philips as per Interior
design.
e Supply, installation, testing and commissioning of LED Based
LED Bulkhead with High Pressure Die Cast Aluminium Body
provided with Polycarbonate cover, System Lumen Package of
MR 600 lm and a maximum System Wattage of 10 Watts, Ingress Nos. 3.00 1,665.00 4,995.00
Protection Rating of IP66 and IK Rating of IK09, Operating Voltage
Range of 120-277V AC as per Luster / Philips as per Interior
design...,
f Supply, installation, testing and commissioning of Flexible Non
Waterproof. 15W Led Strip (5 meter) Light with driver as per
MR Nos. 4.00 2,565.00 10,260.00
Lustre item No. Li-42002-15 / Philips as per Interior design.
g Supply, installation, testing and commissioning of Hanging Light
as per Lustre item No. Li-3424/1 1xGLS/RetrofitCFL/LED E-
MR Nos. 3.00 4,104.00 12,312.00
27,Spun Aluminium Housing Top Plate, Make Luster / Philips as
per Interior design.
h Supply installation, testing and commissioning of Wall Light as per
Lustre Item No. Li-3314/1W-1XGLS/Retrofit CFL/LED-B-22 Base
MR & Arm Made of Brass Casting,Span Brass Holder Cap, Glass Nos. 0.00 5,850.00 0.00
Diffuser. Make Luster / Philips as per Interior design.
Supply, Installation, Testing and Commissioning of AC 230/250
volts, 50 HZ exhaust fan including providing nuts, bolts,
mounting frame, Louvers shutters and other accessories etc.
Complete as per interior design
250 mm to 300mm sweep minimum1250 rpm (4-5 star) Nos 3.00 2,205.00 6,615.00
B5 - Page 4 of 5 For Niche Architects
Govt. Girls High School, Jajpur
TOILET BLOCKS - ELECTRICAL DETAILED ESTIMATE
RENOVATION OF TOILETS (COLLEGE), GOVT. GIRLS HIGH SCHOOL, JAJPUR, ODISHA.
Supply, Installation, Testing and Commissioning of 1200 mm
sweep, BEE 5 star rated, ceiling fan with Brush Less Direct
Current (BLDC) Motor, class of insulation: B, 3-4 nos. blades, 30
cm long down rod, 2 nos. canopies, shackle kit, safety rope,
copper winding, Power Factor not less than 0.9, Service Value
(CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350
RPM (tolerance as per IS : 374-2019), THD less than 10%, remote
or electronic regulator unit for speed control and all remaining
17 MR Each 0.00 2,925.00 0.00
accessories including safety pin, nut bolts, washers, temperature
rise=75 degree C (max.), insulation resistance more than 2 mega
ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing
etc. complete as required. 3 / 4 aluminium blade BLDC ceiling fan
BEE 5 Star Rating as per IS 374:2019, Service Value-7.10m3/ Min
(At turbo Speed)/ 28 to 31Watt full load power at turbo speed.
220m3/min air delivery at turbo speed as per interior design
18 Supplying and fixing of GI box of following size modules,
alongwith modular base & cover plate for modular switches in
recess etc as required.
1.27.1 1 or 2 Module (75mmX75mm) No 7.00 243.00 1,701.00
19 1.53 Supply and drawing of UTP 4 pair Cat 6 LAN cable in the existing
surface/recessed PVC conduit as required.
1.53.1 one run mtrs 0.00 49.00 0.00
20 Supply & fixing of Faceplate for Flush / Surface Mount Information
Outlets Single Aperture with screw hole covers & Icon Tree Size
86mmX86mm
MR Single Aperture no 0.00 250.00 0.00
21 1.19 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm
solid copper conductor PE insulated, shielded with fine tinned
copper braid and protected with PVC sheath in the existing
surface/ recessed steel/ PVC conduit as required
22 Supplying and fixing following modular switch/ socket on the
existing modular plate & switch box including connections but
excluding modular plate etc as required.
1.24.7 TV antenna socket outlet No 0.00 119.00 0.00
Telephone socket outlet No 2.00 105.00 210.00
Supplying and drawing following pair 0.5 mm dia FRLS
PVCinsulated annealed copper conductor, unarmored telephone
cable in the existing surface/ recessed steel/ PVC conduit
asrequired
2 Pair mtrs 75 18.00 1,350.00
24 Automatic Sanitary Napkin Incinerator Machine
Type of fitting - Wall Mounted & Floor Mounting
Napkin Size for Loading - Any size (S,M,L)
Capacity - Burn 80 Napkins Per day
Input Power Supply - 230 V 15 Amp | Provided with Auto Power Off
Residue Ash - Less them 1 mili gram per Napkin with Ash Removal Tray
B5 - Page 5 of 5 For Niche Architects
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
NIT_01.pdf
Tender Document
BOQ_01.pdf
Tender Document
Approved Makes_01.pdf
Tender Document
GCC 2022 with amendments.pdf
Tender Document
Scope of work_01.pdf
Tender Document
Physical Milestone_ 01.pdf
Tender Document
Soil Report_01.pdf
Tender Document
Technical Specification_01.pdf
Tender Document
Tender drawing_NIT_01.pdf
Tender Document
Unconditional Acceptance_ 01.pdf
Tender Document
Integrity Pact_01.pdf
Tender Document
Instruction to Bidder for online Bid Submission_01.pdf
Tender Document
corrigendum-1763-Notice_NIT_01.pdf
pdf • 0.38 MB
corrigendum-1733-Corrigendum 03_NIT_01.pdf
pdf • 0.44 MB
corrigendum-1722-Corrigendum 02_NIT_02.pdf
pdf • 0.29 MB
corrigendum-1706-Corrigendum 01_ NIT 01.pdf
pdf • 0.55 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .