06 WORK IN HEAD SYSTEM STRENGTHENING OF 33 KV Ss AT DPR Sl NO 2 4 5 6 7 8 UNDER EUDD 7 NOIDA

Amount

Cartage of following material from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to various points site of work including loading and unloading at both ends : -

33 KV Control Panel for 33 KV Double T/F

33 KV Control Panel for 33 KV Single T/F

33 KV PT Outdoor

33 KV CT Outdoor

33 KV Fuse Set

33 KV Isolator (Line)

Isolator support Stucture

Cable Al. 3x300 Sq.mm. XLPE 11 KV

O/D Cable Jointing Kit for 3x300 Sq.mm. XLPE 11 KV

I/D Cable Jointing Kit for 3x185 Sq.mm. XLPE 11 KV

Erection, installation and fixing of following material as per RESPO norms complete in all respect : -

33 KV Control Panel for 33 KV Double T/F

33 KV Control Panel for 33 KV Single T/F

33 KV PT Outdoor

33 KV CT Outdoor

33 KV Fuse Set

33 KV Isolator (Line)

Isolator support Stucture

Cable Al. 3x300 Sq.mm. XLPE 11 KV

O/D Cable Jointing Kit for 3x300 Sq.mm. XLPE 11 KV

I/D Cable Jointing Kit for 3x185 Sq.mm. XLPE 11 KV

Providing & fixing of following material of standard make / best quality for complete the work of system strengthening of 33/11 KV Substation as per RESPO norms by the contractor at his own cost : -

Control Cable Copper 4x2.5 Sq.mm.

Sundries Item

PG Clamp Panther to Panther Conductor

Dismantling of following item from various site of work and carriage from work site to J.E's store / central store including loading & unloading at both ends.

Scrap CT & PT

33 KV Line Isolator

PROVIDING AND INSTALLATION OF CHEMICAL EARTHING FOR CONTROL PANEL (WITH ALL MATERIAL AND LABOUR) AFTER INSTALLATION RESISTANCE SHOULD BE LESS THAN ONE OHM. AS PER FOLLOWING (The all material and labour shall be provided by the contractor with 12 month guarantee for resistance value less than one OHM.) :-

Providing of earth elctrode for chemical earthing Pipe in pipe type proper hot deep galvanization dia 50 mm length 3 mtr - 32mm x 6mm terminal connection hole dia 8mm The cavity between the pipe & pipe is filled with conductive mixture - for hermetically filling inside the cavity i.e. between secondary conductor & primary conductor, crystalline compound is to be injected in the electrode assembly. It is a combination of high conductivity metal alloys, copper & aluminum power, conductive carbon / cement and bonding material etc the electrode should be sealed from both the ends. The outer pipe of the elctrode should be galavanized the characteristics of this compound is highly cnductive, non magnetic & non corrosive in G.I. Including providing of backfill compound each elctrode should be supplied with bags of 25 kg x 2 bfc compound (ground resistance enhancement powder 50 kgs each CPRI tested for CONTROL PANEL installed at 33/11 KV L.T. Substation.

Providing and fixing of GI strip of size 32 mm x 6 mm suitable for CONTROL PANEL installed at 33/11 KV L.T. Substation.

Providing and fixing of PVC Pit covers for above earthing electrode terminals.

Dismantling charges of Penther conductor from site

Labour charges to be incurred in installing Bus-Bar at 33/11 KV Sub-Station Sector-60

ARMAMENT SECURITY SERVICES