Loading…
Loading…
Tender ID
Tender Value
₹75 L
EMD Value
₹1.5 L
Closing Date
23 Feb 2026, 11:00 amClosed
Executive Engineer
Executive Engineer, Bathinda Canal and Ground water Division, Bathinda
Estimate for laying underground pipeline of outlet RD 65742/L of kotbhai disty
2026_WR_159499_3
58/22A/2025-26
Open Tender
Civil Works - Canal
Item Rate
Bathinda
Please refer Tender documents.
3 documents required · 3 mandatory
₹0
₹1.5 L
bathinda
29 Apr 2026
6 Feb 2026
23 Feb 2026
6 Feb 2026
23 Feb 2026
6 Feb 2026
12 Feb 2026
Earth work Excavation for pipe line in trenches and pits up to 1.5 meters depth in open area Earth work upto 1.5 m. Depth for All classes of soil except rocky Exceeding 1.5 m depth but not exceeding 2.25 m depth for All classes of soil except rocky Exceeding 2.25 m depth but not exceeding 3.0 m depth for All classes of soil except rocky
Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.
First class brick masonary 229 mm thick laid in cement sand mortar 1.6 in foundation and plinth including supply recarriage of bricks cement.
10mm thick cement plaster 1.4 on sides walls (-) Rs.1.25/- for scaffolding.
10mm thick cement plaster 1:4 on bed and top.
Reinforced cement concrete 1:2:4 hand mixed but including steel reinforcement
Cement Conc.1:2:4 including supply, carriage & with stone ballast or shingle
Cement concrete 1:4:8 with brick ballast 40mm gauge
Providing of 500 mm dia RCC pipe Np2
Lowering, jointing and cutting of RCC NP-2 Plain end pipes 500 mm dia with RCC collars & laying same to correct gradient and alignment and jointing ends and fixing collars with cement mortar 1:2 as per IS 458:2003 in all depths complete in all respect.
Lowering, jointing and cutting of RCC pipes 150 mm dia for vent pipe into Trenches and laying same to correct alignment as per IS 458:2003 (@ 2.5m / No)
Providing of 150mm Dia RCC Pipe NP2
Wrought Iron and mild steel ladders, framed grills, grating etc. complete fixed in position in D-tank.
Providing orange colour safety footrest of minimum 6mm thick plastic encapsulated as per IS:10910 on 12mm dia steel bar confirming to IS: 1786 having minimun cross section as 23mm x 25mm and over all minimum length 263mm and width as 165mm
Providing and fixing of Alfa Alfa Valve fitted on riser pipe to act as Nakka (D regulators)
Centreing &shuttering for Concerte faces
Providing & Fixing of Steel Shutter Gate Assembly in Main Pipeline complete in all respect
DEPARTMENT OF WATER RESOURCES
Name and Address of Contractor / L&C Society
Contact No.
Landline No.
Mobile No.
Name and Address of Banker
Income Tax Return for any one of the last three years
Approximate value of work in hand
Bank solvency certificate
Certificate of "……." Class/Society registeredwith irrigation Deptt.
DEPARTMENT OF WATER RESOURCES
Name of the Contractor / L&C Society
Name of the Work
Please fill information about the each relevant work completed during the last Three years for works Costing more than Rs._________________
Name of Employer
stage.html
html • 0.02 MB
cancelled_1.pdf
pdf • 0.38 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.54 MB
BOQ_323533.xls
BOQ • 0.28 MB
TB03.xls
Additional Documents • 0.03 MB
crgdm16.pdf
PDF • 0.38 MB
crgdm15.pdf
PDF • 0.38 MB
crgdm14.pdf
PDF • 0.38 MB
crgdm13.pdf
PDF • 0.38 MB
crgdm12.pdf
PDF • 0.38 MB
crgdm11.pdf
PDF • 0.39 MB
crgdm10.pdf
PDF • 0.39 MB
crgdm9.pdf
PDF • 0.39 MB
crgdm8.pdf
PDF • 0.39 MB
crgdm7.pdf
PDF • 0.39 MB
crgdm6.pdf
PDF • 0.39 MB
crgdm5.pdf
PDF • 0.39 MB
crgdm4.pdf
PDF • 0.39 MB
crgdm3.pdf
PDF • 0.39 MB
crgdm2.pdf
PDF • 0.39 MB
crgdm1.pdf
PDF • 0.39 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .