REPAIR/ REPLACEMENT BOUNDARY WALL, GATE PILLAR AND DRAINAGE AND FOOTPATH / HARD STANDING AT DRONACHAL TOP BHOPAL

Amount

Demolition stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc,

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise provided for etc. complete all as specified.

Separating, scraping and cleaning of reinforcement (Demolition of concrete measured separately)

Demolition and breaking up any bore drain pipes, etc (RCC/ SWG/CI /PVC etc) of any description in trenches or floors, including connections and fittings.

Taking down of cement plaster including wall finishes in any description on brick or stone wall etc., incl hacking out joints for key scrubbing down with water etc. all as specified and directed

Racking out joints/pointing random rubble or polygonal rubble uncoursed or brought up to courses built in cement mortar.

Demolition of cement concrete in ground floors and pavings not exc. 15 Cm thickness (below/above ground level) including floor finishes all as specified and directed

M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base etc complete all as specified and directed

M&L for 100mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in sub base etc complete all as specified and directed

M&L for Stone walling of random rubbled ,brought up to courses well bonded and solidly hearted built in CM (1:6) all as specified and directed.

All as per Item No.10.00 but Except stone

M&L for Brick work flyash bricks, modular size, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

M&L TMT mild steel bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with there in including mild steel wire (annealed) not less than 0.9mmdia or securing with clips

M&L for PCC (1:2:4) type B1 using 20mm graded stone aggregate as in benching of drain

M&L for keyed pointing in CM (1:3) to random or polygonal rubble, uncoursed or brought up to courses.

M&L for flush pointing in CM (1:3) to random rubble masonry, uncoursed or brought upto courses.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms moulds, mitered /stopped ends etc.

Add or deduct for each 25 mm girth or part thereof over or under 30cm ditto

M&L for 300mmdia reinforced concrete pipes class NP-2 laid and jointed complete with collars as directed by engineer in charge

M&L for 200mmdia reinforced concrete pipes class NP-2 laid and jointed complete with collars as directed by engineer in charge

M&L for concrete bed of PCC 1:4:8 type C2 using 40 mm graded stone aggregate for drain pipes bedding & hunching against the sides complete after pipes are laid, jointed and tested complete as specified

M&L for precast RCC 1:2:4 type B1 using 20mm graded aggregate as in cover slab for manhole etc with plane faces set in CM 1: 6 complete all as specified and directed by Engineer-in-Charge.

M&L for 15 mm thick plaster in cm (1:4) on brick walls or concrete surface or any description and in any position and finished the surface even and smooth with using extra cement all as specified

M&L for 15 mm thick plaster in cm (1:6) on brick walls or concrete surface or any description and in any position and finished the surface even and fair all as specified

M&L for sand filling under floors including watering and consolidation complete all as specified & directed.

M&L for 60 mm thick machine pressed precast concrete interlocking paver block (ISI Mark) confirming to IS-15658-2006 M-35 grade as deign and pattern approved by GE as in path way / hard standing complete all as specified & directed.

M&L for 80 mm thick machine pressed precast concrete interlocking paver block (ISI Mark) confirming to IS-15658-2006 M-40 grade as deign and pattern approved by GE as in path way / hard standing complete all as specified & directed.

Dismantling structural steel work in doors, gates and trusses etc.

S&F rolled mild steel Fe 410-W(Gde-E250)quality -A Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

S&F 1mm thick Mild steel, plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams including bending or turning up, mitred angles, etc. as required all as specified.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of newly steel surfaces of any description over 10 cm in width or girth not otherwise described.

Dismantling Asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings

Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

Dismantling posts or struts (wood, steel or R.C.C.) any section, embedded in concrete, brick work, masonry, etc including taking out embedded portion and making good disturbed ground

S&F Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

Dismantling fencing wire mesh,any type.

Excavation in post holes (or similar holes) each n exc o.5 cum getting out returning, filling in and ramming earth or broken rubble mixed with earth around,in layers not exceeding 25 cm, watering and removing surplus soil to a distance n exc 50 M and making surface good in hard/dense soil complete all as specified.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails straining bolts, etc including provision of binding wire complete all speciified and directed

Supply only galvanised chain link fencing, any size or type, all as specified and directed.

Supply only MS screw, bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut not exceeding 12cm long and dia of neck as not exceeding 12mm complete all speciified and directed

S&F, angle iron (confirming to Fe-290 Grade E-165) as in posts, struts in fencing including cutting top to shape required, drilling holes, notching for wire etc complete all specified and directed

S&F steel flat iron including necessary drilling hole bolting or riveting etc and similar work complete conforming to Fe -290 Gde E - 165 complete all speciified and directed

M&L for PCC 1:2:4 type B2 (using 40mm graded stone aggregate) as in mass filling in post hole / leveling course etc complete all as specified and directed

M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in mass filling in post hole / leveling course etc complete all as specified and directed

M&L for Providing, cement concrete 1:2:4 type B1 in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and threading, as directed including necessary formwork.

S&F steel work in tubular roof trusses (framed), trussed, purlins, poles, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St -240

M&L for rolled mild steel Fe -410-W (Grade -E-250) quality-A in Plates (plain or chequered), channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed.

M&L for three coat of white wash including preparation of new plastered surfaces complete all as specified and as directed.

Samaksh Enterprises

RAJPATI CONSTRUCTION

CREATIVE CONSTRUCTION

City buildcom builders & devlopers

PADAMSHRI CONSTRUCTION CO

SATHI ENTERPRISES