Supplying, Installation, testing and commissioning of Professional Audio system alongwith touch panel for Auditorium Indira Gandhi Govt. Dental College Jammu. (2nd call)

Amount

Supply installation testing & commissioning of Two-Way full range Speakers for Main speaker with 12" Lf and 3” in/out Voice coil + 1" exit HSP Annular HF, Power Handling (AES standard) 450W RMS / 1800W Peak, Frequency Response 50Hz-22khz, Average Sensitivity - 97dB/W/m, Max SPL 130db peak , Nominal Directivity - 80° x 50° , Crossover 1.5kHz 2-way passive network, Cabinet - CNC made with tongue & grove assembly 15 and 18mm birch plywood with Textured Waterborne Black coating , Integral Airnet fabric on Front grill , etc as required.

Supply installation testing & commissioning of Single 17” Subwoofer System 38 Hz - 1200Hz (± 3 dB) frequency response, Max SPL 132dB @ 1W / 1m, long term Continious power handling 800 - 900 watt rms @ 8Ohms with sensitivity of 99db, Nominal Impedence 8 ohms, CNC made with tongue and grove assembly, 18 mm birch plywood with Smooth textured coating (Black and White colors) or Varnish finish (Natural and Oak colors), etc as required.

Supply installation testing & commissioning of Two-Way Wall Mount Coaxial Technology full range Speakers for Stage monitor with 7.5" Lf and 0.75" Hf frequency response, Max SPL 121 dB PEAK, Continious power handling 200 watt RMS with Average Sensitivity (wideband 200~16000Hz) @ 92 db, Frequency response (-6dB half space, no EQ) 52~22000Hz, Nominal Directivity (-6dB) 80º conical above 1000Hz, CNC made with tongue and grove assembly 15 mm birch plywood WITH Textured Waterborne Coating (Black and White colors) or Varnish finish (Natural and Oak colors), etc as required.

Supply installation testing & commissioning of four Channel Professional Power amplifier with 4 x 800W @ 8 ohms, 4 x 1400W @ 4 ohms, Frequency Responce: 10- 25000Hz, Sensitivity: 1.6Vrms Input Impedence: 20KΩ, Crosstalk >70dB, S/ N ratio - > 110dB, Damping Factor: >800, THD: < 0.05% , Slew Rate: 30V / us, etc complete as reqd.

Supply installation testing & commissioning of Class H or Class D Dual Channel Professional Power amplifier for surround speakers , with 2x 1100 watts power @ 4 ohms per channel & 2x 750W 8 ohms , Minimum Damping factor > 500, Frequency Response (-1dB) 20~20000Hz, Typical THD (half power, 1kHz, 8 ohms) <0.1%, etc complete as reqd.

Supply installation testing & commissioning of Class H or Class D Dual Channel Professional Power amplifier for surround speakers , with 2 x 600W 4 ohms power & 2x 400W 8 ohms , Minimum Damping factor > 500, Frequency Response (-1dB) 20~20000Hz, Typical THD (half power, 1kHz, 8 ohms) <0.1%, etc complete as reqd.

Supply installation testing & commissioning of 2 in x 6 Out, Networkable Loudspeaker Management System, High precision 32-bit floating point TEXAS INSTRUMENT DSP (48kHz sampling rate)24-bit D/A converters with 118B dynamic range and audiophile grade preamps, On each output: Routing, Delay, Gain, HPF and LPF filters (up to 48dB/oct), 8 filters (PEQ and Shelving), Compressor / Limiter (Threshold, Attack, Release, Ratio) , complete as reqd.

Supply Installation testing & commissioning of 20 channel audio mixer with 12 total inputs mixing console with 4 Mic / line Input, 4 aux AND 4 Group, AC 100-240 VOLT, Power consumption 36 W, Phantom Power 48V, Complete as reqd.

Supply , Installation , Testing & Commissioning of Single chip DLP Technology by Texas Instruments Projector with 20,000 hours maintenance free operations 5,500 ANSI lumens of brightness, WUXGA resolution, and 20,000:1 contrast ratio for clear, crisp and bright projection Great flexibility with 1.65x zoom lens and manual horizontal and vertical lens shift Image adjustment is made easy with 4 corner corrections, horizontal and vertical keystone corrections Built­in 2x 5W audio speakers with multiple audio interface, Throw Ratio 1.15 ­ 1.90 : 1 Zoom Ratio 1.65x Lens Shift ( Based on Full Image Height) Vertical: +12%; Horizontal: +/­2.5%, Projection Distance 1.5 ­ 5.0 m Projection Lens F = 2.45 ­ 3.13, f = 17.23 ­ 27.9 mm, etc complete as required.

Supply installation testing & commissioning of Wireless Handheld Microphone System, Receiver: Frequency range F-Band: 824 - 831 MHz, 863 - 865 MHz, Switching bandwidth 18 MHz, SN ratio >100 dB, T.H.D. < 0.5% at 1 kHz, Transmitter: Transducer type: Dynamic, RF Power Output 10 mW, etc. complete with installation as per the site requirement as reqd.

Supply installation testing & commissioning of Wireless Lapel Microphone System, Receiver: Frequency range F-Band: 824 - 831 MHz, 863 - 865 MHz, Switching bandwidth 18 MHz, SN ratio >100 dB, T.H.D. < 0.5% at 1 kHz, Transmitter: Transducer type: Dynamic, RF Power Output 10 mW, etc. complete with installation as per the site requirement as reqd.

Supply Installation testing & Commissioning of 16.5" Gooseneck cardioid Microphone, polar pattern cardioid, Frequency Range 70-16000 Hz, Sensitivity14mV/Pa, Impedance >100 ohms. Complete with mic base unit etc. as reqd.

Supply Installation testing & Commissioning of Dynamic Vocal Microphone, polar pattern Supercardioid, Frequency Range 70-20000 Hz, Sensitivity 2.5mV/Pa, Impedance <600 ohms, etc complete as required.

Supply Installation testing & Commissioning of Dynamic Instrumental Microphone, polar pattern Supercardioid, Frequency Range 70-20000 Hz, Sensitivity 2.5mV/Pa, Impedance <600 ohms, etc complete as required.

Supply, laying & Fixing of Microphone Lines High grade, professional, Low-noise, 2-Core High conductivity PVC insulated in PVC Jacket, Shielded, copper cable with Di-electric insulator both end with XLR m/f connector as required.

Supply, laying & Fixing of Speaker Lines: 2-Core, 1.5 sq mm High definition Speaker Cable, PVC insulated in PVC jacket laid in existing conduits as reqd.

Supply Installation testing & Commissioning of main SYSTEM RACK ( 24U ) - M.S. Rack with Power indicator, power sockets and isolator fitted duly prewired to accommodate Control Room equipments e.g. Amplifiers, Controller, Equalizer etc as required.

Supply , Installation , Testing & Commissioning of of 1080p HDMI Matrix switcher with minimum 4 HDMI input & 4 HDMI output. Unit should have minimum Frequency bandwidth of 2.25 Gbps (Single Link) and each input signal should reconstituted into a new signal before being output thereby eliminating any jitter component. Should support HDCP and all signal paths should be fully buffered to prevent cross talk, should have Auto EDID discovery and HDMI should be minimum HDMI v1.3 Deep Color (10 bit color) . Operating temperature: 0 to 50°C or better & Storage temperature: -10 to 60°C or better. IR Remote control and RS232 for 3rd party control. Must include rack mount kit, etc as reqd.

Supply , Installation , Testing & Commissioning of HDMI Extender Kit. Must extend over ethernet cable HD singal minimum upto 60 mtrs & 4K UHD signal minimum upto 40 mtrs. Must require no adjustment or Tunning. HDMI 1.4 Compliant, HDBaseT, HDCP compliant, Must Support Embedded HDMI Audio, Including Dolby® TrueHD and DTS-HD Master Audio. Bandwidth: 3.4 Gbps or better, should Supports HD 3D formats & PC resolutions up to WUXGA, HDCP Repeater and CEC bypass, Bi-directional infrared remote control extensions. Operating temperature: 0 to 40°C or better & Storage temperature: -20 to 60°C or better.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

4 X 16 sq. mm + 2 X 6 sq. mm earth wire

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

4 Module (125mmX75mm)

8 Module (125mmX125mm)

12 Module (200mmX150mm)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 amps switch

15/16 amp switch

3 pin 5/6 amp socket outlet

6 pin 15/16 amp socket outlet

Supplying and fixing of surface mounted 18/20 watt LED batten tube fiiting 4 feet long including connections etc as required.

Supplying & fixing Recess/surface mounted LED Luminarie with full diffuser (size 600mm x 600 mm).

Supplying and fixing of 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole 5/16 Amp

Single pole and neutral 32 Amp

Triple pole and neutral 63 Amp

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 4 way (4 + 12), Double door

A G ACOUSTICS INDIA PVT LTD.