Construction of Control Room Building with steel structure and puffed panels including electrification works, 2 Nos. Transformer Plinth and cable duct for establishment of 33/11 KV indoor SS at Rajakeelpakkam

Amount

Earth work excavation in all soils and subsoils, hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders with an initial lead of 10m and initial lift of 2.50m in including all materials labour, T&Ps etc., complete.

Dismantling the RCC, PCC and Brick Masonry in cm any met with during excavation for foundation trenches and clearing the debris from site including all labour charges, T & Ps etc., compete.

Dismantling the RCC in cm

Dismantling the PCC. In Cum

Dismantling the Brick Masonry

Supplying and filling in foundation and basement with filling Sand in layers of not more than 15 cm thick well rammed, watered and compacted complete, as per standard specification

Applying antitermite treatment to the foundation and basement of the building as per standard specification of different stages including cost of chemicals, lead, lift and labour etc., complete as per direction of Engineer.

Refilling with excavated earth wherever required including labour for filling, watering and consolidating with all lead, lift, etc, as per standard specification.

Transporting the excavated earth and debris away from site to a lead of 10Kms including cost of conveyance, loading and unloading etc., complete, as per direction

Laying plain cement concrete M10 mix using 220kg minimum cement content and using 20mm HBG (machine broken) for foundation and basement leveling course including cost of all materials, lead, lift and labour complete as per std.specification.

Laying RCC in M25 design mix using 12mm to 20mm down graded metal and 400Kg/m3 minimum cement content for various types of work for column, footing and column Below G. L., etc.,complete. (excluding reinforcement)

Grade beam & tie beam for control room I section leg

Base Concrete / Raft.

Column up to Basement

CAST-IN-SITU waist slab

RCC Top layer of Plinth

Supply, fabrication and placing in position of MS / RTS / TMT grills(Fe 415 Grade steel) for reinforced cement concrete works including cost of steel, binding wire, labour, lead, lift, etc., complete.

Building Brick Masonry in cm 1:6. using II nd sort chamber burnt bricks of size 230x110x70mm at all levels including cost of all required materials, labour, lead, lift, etc., complete as per std specification and direction.

Fabrication and supplying of Foundation bolt threading for a length of 10 cm at top and hot dip galvanising of bolt including supply of 3 nos of GI nuts and washers and fixing in the position as directed by the engineer at site including assembling of template etc., cost of template, all material, labour, lead, lift etc., complete

25 mm dia 1.50 m length

Plastering with cement mortar over the concrete/BM surfaces at all levels both outside and inside of the building including cost of all materials, hacking the surfaces, scaffolding, lead, lift, curing, etc., complete as per the std. specification and direction.

Ceiling plastering with cm 1: 3, 10mm thick

plastering in C.M. 1: 5, 12mm thick, Inside/outside

Floor Finish with anti skid tiles of spartek or johnson, kajaria, nitco of required size Anti-Skid in all floors over a base layer of C.M. 1:3. 20mm thick laid in-situ and pointed with same coloured cement for bath & FOL etc., including cost of tiles and other materials, labour, lead, lift etc, complete, and as directed by the Engineer

Anti-Skid tiles for Bath & FOL

Flooring with Industrial tiles of approved quality (Johnson-Endura) and colour, scratch resistant to set in cement mortar 1:3 for flooring in control room including cost of industrial tiles, all leads, lifts labour for laying fixing and finishing neatly as per standard specification and as directed by the Engineer-in-charge ( Industrial tiles colour and shade to be got approved by the Executive Engineer before in use )

Floor Finish with acid resistance tiles in battery room (Johnson-Endura) and colour, scratch resistant to set in cement mortar 1:3 20mm thick including cost of tiles and other materials, labour, lead, lift etc, complete, and as directed by the Engineer

Supplying and fixing of Rolling shutters of clear opening using 18 gauge M.S. Sheet TATA STEEL with Electrically Operated type. The top shaft is well designed with top roller fitted with high tension springs with special quality of cast iron pulleysand ball bearing arrangements and painting with one coat red oxide metal primer to the clear opening, including cost of all materials, fabrication, transportation, and fixing in position Godrej 7 levers locks 2Nos, for each shutter and labour charges complete., as directed by the Engineer.

Supplying and fixing of PVC Door of size 750x2100mm with PVC shutters single leaf in , outer frame of size 100x75mm and the shutter by single mould SINTEX make with furniture fittings 3Nos. 75mm Ano. Alu. Hinges, 2Nos. 150mm tower bolts, 1No. 150mm aldrop, including cost of all materials, complete as per direction.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open)/Sliding Type from the shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned.Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.The window should be got approved from the Executive Engineer before use on work

Supplying and fabricating and fixing in position of anodized aluminum natural color matt finish Louvered type ventilator of size 1.18 x 0.58m glass fixing anodized aluminum grove clip with screws and fixing 4mm thick frosted glass lowers model including cost of all materials and all leads, lifts, labour for fabricating and fixing in position including frilling holes in R.C.C. work and brick work etc., complete as per standard specification

White washing two coats with approved cement paint over newly cement plastered surface, ceiling, sunshade,loft bottom and other surface, including cost of all materials, watering, curing, lead, lift, etc., complete, as per std specification.

Inside Wall paint two coats with best quality plastic emulsion of approved colour with two Coats over a primer coat and putty over cement plastered surface including cost of all materials , leads, lifts, labour , scaffolding etc., complete.

Painting wood work with two coats of Synthetic enamel paint of approved quality and including cost of all materials, labour, lead, lift etc, complete as per std specification and as directed by the Engineer.

Painting the new steel work with two coats best quality and approved colour enamel paint over the primer including cost of all materials, labour, etc., complete as per std. specification and as directed by the Engineer.

Supplying, fabricating and fixing in position of MS 'I' section and MS channel framed and MS base plate with GI bolt & nuts with necessary including welding, grinding at various levels as per approved design of the Engineer, including cost of steel and other required materials, labour charges, transportation and fixing, taking grooves in BM/RCC, packing the pockets with CC and painting with one coat metal primer complete.

MS 'I' beams & MS channels

Gates, staircase handrails / ladder

M.S Channel and Angle

M.S. Flats 75mmx 10mm thick for earth matts

MS Chequred plate 8mm thick

MS Rails 90 lbs

Providing and fixing in position as per CRCA with thermal insulation materiald and ACP sand wich partition extruded aluminium framed, shadow boxes, aluminium capping for the fixing of grooves of the curtialn galzing and vermin proof including functional design of the aluminium sections for the fixing panels , aluminium cleats, sleeves and gaskets, toggles, etc stuctural and weather sealents etc., as per approved drawings and as directed by the Engineer - in - charge.

Providing Gutter arrangement for draining rain water from roof sheet including cost of all materials lead, lift ,T&Ps etc. complete.

Supplying, laying and jointing of PVC pipes of approved brand and ISI quality for waterline, sewerling, and rain water downfall pipe etc., including cost of all materials and GI specials, fixing the pipes over BM/CC surfaces by taking grooves and fixing wooden plugs, screws firmly with special clamps as directed.

PVCPipe140mm dia.6Kg/Sqcm for Bore Well

PVC pipe140 mm dia. 6 kg / Sqcm Strainer

PVC Pipe 110 mm dia. 6 kg /sqcm.for rain water & earth pit

40mm HDPE for Borewell motor

PVC Pipe 40mm dia. 10 kg / sqcm

PVC Pipe 32mm dia. 10 kg / sqcm ffor toilet & earth pit

PVC Pipe 20mm dia. 10 kg / sqcm

P.V.C. ASTM Threaded Pipe 32mm dia.

P.V.C. ASTM Threaded Pipe 25mm dia.

Supplying and fixing of GM wheelvalve of approved brand and ISI quality wherever required including cost of all materials, lead, lift and labour charges, complete as directed

Cost of 40mm G.M. Gate valve

Cost of 32mm G.M.Wheel Valve-toilet&earth pit

Cost of 25mm G.M. Wheel Valve

Cost of 20mm G.M. Wheel Valve

Cost of C.P. Screw Down Tap 12mm

32 / 25mm GI Union For Pumps.

Supplying and fixing of glazed 22"x16" wash basin (ISI quality of approved brand) with C.I. brackets c.p.pillar tap and all connection of water inlet and waste water connection 12mm wheel value soap container and fixing of 5mm thick mirror best quality approved brand along with Aluminium Towel rod. Mirror should be framed in anodized aluminium frame 2"x16" of size complete as per standard specification and as directed by engineer.

Lipped Mouth Porcelain Flat Back Urinal with all accessories such as 32mm dia Bell Mouth PVC Connection, 15mm dia CP Angle cock, 15mm dia 'B' Class GI Waste Water Pipe, 15mm dia Nylon Connection, 15mm dia Brass Nipple etc. and to providing wiring to Electronic, flushing urinal power point. including cost of all materials, leads, lifts, labour for fixing etc., complete.

Supplying and fixing in of position P V C Nainey Trap of approved make & quality fixed over a bed with C. M. 1:3, and fixing stainless steel Grating including the cost of all materials, labour, lead, lift, T & Ps etc., complete.

Supplying and fixing of RCC manhole cover of size 600x600mm (HD) or RCC cover slab with pedastal square for the sewer manholes including cost of all materials, labour charges, etc., complete as per std. specification and as directed by the Engineer.

Supplying and fixing of water closet with ‘P’ or ‘S’ trap with double flapped seat and seat cover with brass hinges and 10lit capacity PVC low level flushing tank with all fittings including cost of all materials,all leads, lifts, labour for fixing etc, complete as per standard specification.

Supplying and fixing of S.W.Gully trap 150mm with pvc gratings including cost of gulley trap with grating and all leads, lifts, labour for fixing in position etc, complete.

Supplying and fixing of ornamental handrail for front ramp in stainless steel using 40mm dia pipe at top, 25mm dia two rows at middle and 25mm dia pipe for verticals at every 1.00m C/C including cost of all materials, transportation and fixing in position, labour charges, complete.

Conducting geophysical survery to assess the availability of sufficient ground water and to locate the place of borewell including cost of all materials, labour hire charges for tools and plants leads, lifts labour etc., complete.

Drilling Borewell in all kinds of soil of Bore of size 150 mm diameter by using rotatory drilling power driven/Hand driven equipments at top 6"dia and necessary bentonite solution to get a developed surface not less than 5 hours including cost of all materials , labour, hire charges for all T&P's including Mobalisation and Demobalisation,leads,repeated lifts for changing the drilling rods to the required depth including cost of all materials, leads, lifts, labour etc, complete.

Suppling and filling with Pebbels for annular spacing in between strainer pipe and earth surface including cost of all materials, leads, lifts, labour etc, complete.

Flushing the Bore well with power rotatory flushing equipments including Mobalisation and Demobalisation, ,including cost of all materials, leads, lifts, labour etc, complete.

Supplying and providing wiring with 2 runs of 4 sq.mm PVC insulated copper wire alongwith 2.5 sq.mm PVC insulatd copper wire for earthing inside the PVC rigid conduit not less than 25mm width and 2mm thickness for running circuit main from DB to all Switch Boxes, motors and inverter. Neutral should not be looped.Neutral in back and earthing in green to be followed.

2 H.P. Submerssible Pump

Supplying and fixing of 2 HP Texmo/ Kirlosker/Suguna Submercible pump with all accessories, suitable starter, main switch fusecut, earthing arrangements, board for fixing main switch/fuse cuts/starter, check/foot valve, cost of all materials, labour for erection at site, bolts, nuts required for erection, lead, lifts, labour etc.,complete (The pump and starter should be tested by Engineer on running condition) for drinking water sump.

Supplying and fixing of PVC water tank of approved brand (sintex)1000 litre capacity in terrace floor as directed by engineer including cost of sintex water tank, labour for fixing in position, all leads,lifts etc complete as directed. For Bore Water & Metro Water

Supply of RCC precast well rings of dia 1.35m dia. 300mm height and 50mm thick for Sinking wells.for RainWater Harvest. including cost of well rings, lead, lift, erection charges etc., complete.

Encraving the Emblom, Name of SS in front wall with florasent Stickers including cost of Artist, Paint as per board's norms including cost of materials, scaffolding and labour charges complete.

Supplying and fixiing of 1000-5000Lit capacity including Transporting and erecion at site

Supplying and filling with well gravel including cost of all lead lift labour watering, consolidation including water sprinkler and all other T&P etc., complete

Laying plain cement concrete M15 mix using 240kg min.cement content for transformer plinth and RCC Road including cost of all materials, lead, lift and labour for laying concrete etc.

PCC below G.L (without shuttering)

PCC above G.L (with shuttering)

Outside Wall paint two coats with best quality plastic emulsion of approved colour over a primer coat and putty over cement plastered surface including cost of all materials, leads, lifts, labour, scaffolding etc., complete.

Supplying and providing wiring for lights, fans,Duct lights etc., using with 2.5 sq.mm PVC insulated copper wire for phase and neutral and 1.5 sq.mm PVC insulated copper wire for looped earthing in 25mm rigid conduit .PVC accessories with Metal Box in flush with wall with 5A Modular Switch Legrand/Crabtree/MK with Suitable Base plate, Cover plate with continuous earth wire connection of 14 SWG TC wire for PVC light point / Tube light point / Buzzer inclluding cost of all materials lead, lift, etc., complete. The switch box of normal size 12"x8"x3" should be used.

Suppyling and providing wiring for Duct lights and additional heater point using with 2.5 sq.mm PVC Insulated copper wire for phase ans neutral and 1.5 sq.mm PVC Insulated copper wire for looped earthing in 25mm rigid conduit GI pipe not less than 25mm width and .PVC accessories with Metal Box in flush with wall with 5A Modular Switch Legrand/Crabtree/MK with Suitable Base plate, Cover plate with continuous earth wire connection of 14 SWG TC wire for Bulk head fittings and Heater lamp points inclluding cost of all materials lead, lift, etc., complete. the switch box of normal size 12"x8"x3" should be used.

Supplying and providing wiring 5amp plug point using two runs of 2.5 sq.mm PVC insulated copper conductor along with 1.5 sq.mm copper wire for earthing and also including 5amps two in one socket controlled by 5amp flush type switch on suitable Switch Box and connections.

Supplying of switch board and wiring 5 runs of 4sq.mm PVC insulated copper wire (phase and nuetral) and also for earthing and connection with 15Amps switch and socket combined with 15 Amps plug and 4P 63A MCV with encloser size for Battery point. This includes cost of materials and labour charges.

Supplying and providing wiring to Motor Room Points from motor to starter switch boxes using 2 runs of 4 sq.mm PVC insulated copper wire along with neutral PVC casing/PVC pipe not less than 25mm width with 2mm wall thickness including cost of materials, labour charger, switch board of size 18"x12"x3" with 16 Amps doublepole main switch and providing sufficient pace of providing and connections

Supplying and providing wiring with 2 runs of 4 sq.mm PVC insulated copper wire alongwith 2.5 sq.mm PVC insulatd copper wire for earthing inside the PVC rigid conduit not less than 25mm width and 2mm thickness for running circuit main from DB to all Switch Boxes, motors and inverter. Neutral should not be looped.Neutral in back and earthing in green to be followed.

Supplying and fixing, testing & commissioning of Wall Mounted LED 18W LED 4' with necessary connections etc., of suitable for control room

Supplying and fixing, testing & commissioning of 1200mm (48") AC ceiling fan complete set with electronic regulator and suitable down rod at 3 mts above floor level with connections etc.,

Supplying and fixing, testing & commissioning of Mirror optical surface mounted light fitting with 2x2 70W LED Luminaire lamp and necessary fixing accessories of standard make and connections.

Supplying and fixing, testing & commissioning of 300mm (12") dia AC Exhaust fan including wall bracket and accessories of standard make fixed on the wall and connections.

Supplying and fixing, testing & commissioning of 450mm 18" dia AC Exhaust Fan including wall bracket and accessories of standard make fixed on the wall and connections.

Supplying and fixing, testing & commissioning of Bulk head fitting with guard and 10W LED Bulb for duct lighting with necessary connections etc.,

Supplying and fixing, testing & commissioning of 100W LED Tr.light fittings for 100W LED with necessary connection edge of suitable for control room inclusive of labour charge edge

Supplying and fixing, testing and commissioning of 100W Board light fittings

Supplying and fixing, testing and commissioning of 120W LED street light fittings

Supplying and fixing,testing & comissioning of with 18W LED ceiling light Fitting

Supplying and fixing,testing & comissioning of earth electrode as per specification. (AC, DC & Charger) 1.40mm GI Earth Pipe =3 mts, 2.600x450x25mm RCC ring with cover =1 No 3.Charcoal =15kgs, 4.Salt =10 kgs, 5.Bentonite powder =50 Kgs.

Space Heater for Control Room

Battery Charger Change over switch

Supplying and fixing best quality 48 W LED gate light ISI make with all fittings including cost of all material, labour for fixing, lead, lift, etc., complete as directed by the department engineer at site.

GST for bidders within TamilNadu

GST for bidders outside TamilNadu (IGST)

K S CONSTRUCTION

YAMINEE ELECTRICAL PROJECTS PRIVATE LIMITED

S S AND CO

K.S.MANJU