Sr no/b6/vs area balodabazar/45-3/2026-27/2656/raipur/04.08.2026

Surface dressing of the ground including removing vegetation and making up undulations and in-equalities not exceeding 15 cms in depth/ height including disposal of rubbish upto 1.5 m lift and lead upto 50m (at least 5m away from the dressed area). As per SOR Item No. 1.2 page 9

Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits. In all types of soil. As per SOR Item No. 1.1.1 page 9

Extra for every additional lift of 1.5 m or part thereof. In all types of soil. As per SOR Item No. 1.6.1 page 10

Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size). As per SOR Item No. 3.1.3 page 22

Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete. As per SOR Item No. 1.18 page 12

Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). As per SOR Item No. 3.2.1 page 23

Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: As per SOR Item No. 3.4 page 23

Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire in foundation and plinth all complete: Thermo-Mechanically treated bars FE 415 As per SOR Item No. 3.12.1 page 24

Providing and fixing formwork including centering, shuttering, strutting, proping, brecing etc. complete and including its removal at all levels, for: Foundations, footings, base of columns & plinth beam in any shape & size. As per SOR Item No. 2.1.1 page 16

Providing and fixing formwork including centering, shuttering, strutting, proping, brecing etc. complete and including its removal at all levels, for: Columns, Pillars, Piers and likes- rectangular or square in shape As per SOR Item No. 2.1.5 page 16

Providing and fixing formwork including centering, shuttering, strutting, proping, brecing etc. complete and including its removal at all levels, for: Beams, lintels, cantilevers & walls As per SOR Item No. 2.1.8 page 16

Providing and fixing formwork including centering, shuttering, strutting, proping, brecing etc. complete and including its removal at all levels, for: Weather shade, chhajja, Cornices and mouldings As per SOR Item No. 2.1.13 page 17

Providing and fixing formwork including centering, shuttering, strutting, proping, brecing etc. complete and including its removal at all levels, for: Stair cases of all types excluding spiral and folded plate type, including risers and landings As per SOR Item No. 2.1.15 page 17

Providing and fixing formwork including centering, shuttering, strutting, proping, brecing etc. complete and including its removal at all levels, for: Folded plates slabs As per SOR Item No. 2.1.10 page 17

Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20mm nominal size) including form work. As per SOR Item No. 3.13 page 24

Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand) As per SOR Item No. 7.5.4 page 45

Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: As per SOR Item No. 7.6 page 45

Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position. Sal, bijasal, benteak, khair, haldu As per SOR Item No. 8.1.2 page 54

Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer. As per SOR Item No. 9.15 page 81

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rails of T-iron 40x40x6mm with 38mm steel pulleys complete with bolts, nuts, locking arrangement stoppers, handles including applying a priming coat of red oxide zinc chromate primer. As per SOR Item No. 9.11 page 81

6mm thick cement plaster of mix In cement mortar 1:4 ( 1cement : 4 fine sand) As per SOR Item No. 11.1.2 page 103

12mm thick cement plaster of mix In cement mortar 1:5 ( 1cement : 5 fine sand) As per SOR Item No. 11.2.3 page 1038

15mm thick cement plaster on the rough side of single or half brick wall of mix. In cement Mortar 1:5 (1 cement : 5 fine sand) As per SOR Item No. 11.3.3 page 103

Providing and making 6mm thick cement plaster 1:3 (1 cement : 3 finesand) finished with a floating coat of neat cemet and a thick coat of lime wash on top of wall when dry for bearing of R.C.C. slab and beam. As per SOR Item No. 11.6 page 104

Providing and laying vitrified floor tiles with double charge/ multi charge printing with water absorption less than 0.5% and conforming to IS : 15622 of approved make in all colours and shades and size mentioned below (+/- 10mm), laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size 800x800mm thickness 9 to 10 mm As per SOR Item No. 12.79.2

Providing and laying rectified ceramic glazed floor tiles of size 300x300mm and above conforming to IS : 15622 of approved make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement mixed with matching pigment etc., complete. Size 600x600mm thickness 8 to 9 mm As per SOR Item No. 12.74.3

Providing and laying rectified ceramic glazed ceramic wall/dado tiles of 1st quality conforming to IS : 15622 of approved make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement mixed with matching pigment etc., complete. Size upto 300x450mm thickness 7 to 8 mm As per SOR Item No. 12.75.1

Chequerred precast cement concrete tiles 22mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tile including cleaning of joint etc complete on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) Dark shade using ordinary cement As per SOR Item No. 12.37.3 page 116

15 mm thick Table rubbed polished Granite stone slab in risers and treads of steps skirting dado and pillars laid on 12mm (Average) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry including rubbing and polishing etc. complete (single stone is to be used for risers and treads of steps and width of stone for skirting and dado shall be equal to the height of skirting & dado and length of 1.0 m). Granite stone black As per SOR Item No. 12.46.2 page 118

Providing and fixing aluminium work for doors, windows, ventilators and partitions made out of extruded aluminium standard sections (main section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285 mitred and jointed mechanically including aluminium cleats, neoprene weather stripping gasket beveled edge beading, screws duly fixed in wall/ floor with fixing clips or hold fasteners or bolts and nuts as required aluminium sections shall be anodized transparent or dyed to approved shade according to IS: 1868, minimum anodic coating shall be of grade AC-15. (Glazing to be paid for separately: For shutter of doors, windows & ventilators including providing and making provision for fixing of fitting wherever required including the cost of PVC/ neoprene gasket required (Fittings shall be paid for separately). As per SOR Item No. 9.47.2 page 85

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4 mm thickness As per SOR Item No. 9.51.1 page85

Extra for powder coated (minimum 50 micron) aluminium sections instead of anodized. As per SOR Item No. 9.48 page85

Providing stainless steel railing/ grill made of S.S. flats, hollow S.S. pipe or square/ rectangular sections of approved design fixing in stair case, balcony or other places with metal fasteners and stainless steel bolts etc complete. SS Grade 204 As per SOR Item No. 9.57.2 page86

Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges. 40 mm. thick (single leaf) As per SOR Item No. 8.12.1 page 56

Providing and fixing bright finished brass butt hinges with brass polished MS screws complete: 100x85x5.50 mm (Heavy Type) As per SOR Item No. 8.58.2 page 62

Providing and fixing bright finished brass sliding door bolt with nuts and brass polished MS screws complete: 300x16mm As per SOR Item No. 8.60.1 page 62

Providing and fixing brass door latch with brass polished MS screws complete: 300x16x5 mm As per SOR Item No. 8.61.1 page 62

Providing and fixing bright finished brass tower bolts (barrel type) with brass polished MS screws complete: 250x10mm As per SOR Item No. 8.62.1 page 62

Providing and fixing bright finished brass door handles with brass polished MS screws complete: 125 mm As per SOR Item No. 8.65.1 page 63

Providing and applying Glossy finish Enamel paint mimimum 2 coats in all surface applying @ 0.75 lit/ 10 Sqm up to required finish as per relevent I.S. code 2932: 2013 of (Product such as Asian Apcolite Premium Enamel , Dulux Promise Premium Enamel , Nerolac Synthatic Enamel, Opus Prime enamel ) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackle and labour etc. complete for the work. As per SOR Item No. 14.72

Providing and applying Polymaric cement primer on all surface applied @ 0.80 litrs/10 sqm as per relevant I.S. code 15489:1974 (product such as Birla white primacoat/ activcoat, Asian Trucare , Dulux interior cement primer, Opus Calista / I10 ) with all tool tackles and labour etc. complete for the work . As per SOR Item No. 14.59

Providing and applying 2mm thick white cement based polymeric Exterior grade Putty with minimum 3 coats applied @ 5.4 kg/ 10Sqm as per relevant IS code 17545:2021 (Product such as Birla wall care, Asian trucare, JK wall putty, Berger Bison wall putty) to make the surface smooth and even with all tools tackles and labour etc. complete for the work. As per SOR Item No. 14.56

Providing and applying premium Plastic emulsion paint with roller application minimum three coats appied @ 0.75 lit / 10 Sqm up to final finish as per relevant I.S. Code 15489:2013 Type -1 Class D & C (Glossy and Semi Glossy Finish) of required shade (product such as Asian Apcolite premium , Dulux super cover, Berger easy clean , Nerolac Breezee Metex Gold, Opus I-50/ calista) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour complete for the work . (With 3 Year warranty). As per SOR Item No. 14.64

Providing and applying on exterior surface with PREMIUM Exterior Emulsion paint of required shades to give protective and water proof finish minimum 3 coats applied @ 1.40 lit / 10Sqm up to final finish as per relevant I.S. Code 15489:2013 Type -2 Class D , C ( Glossy /Semi Glossy finish ) (Product such as Asian APEX , Dulux weather shield prima E900 , Berger weathercoat antidust , Nerolac everles excel, Nippon sumo etra, Opus true flex) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour etc. complete for the work (With 3 Year Warranty) As per SOR Item No. 14.68

Boring/drilling bore well perfectly vertical for the specified depth suitable to receive required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer–in-charge upto 90 metre depth below ground level. All types of soil 150 mm dia. As per SOR Item No. 21.1.1.3 page 198

Supplying, assembling, lowering and fixing in vertical position in bore well, ISI marked G.I. casing pipe (Plain) medium class in 4 to 7 meters length one end fitted with socket as per IS: 1239 (Part-1&Part-2) 1992 with IVth revision (Up-to-date amendments), of reputed & approved make, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer- in-charge. 150 mm nominal dia As per SOR Item No. 21.5.3 page 200

Boring/drilling bore well perfectly vertical for the specified depth suitable to receive required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer–in-charge upto 90 metre depth below ground level. Rocky strata including Boulders. Rocky strata including Boulders. 150 mm dia. As per SOR Item No. 21.1.2.3 page 198

Boring/drilling bore well perfectly vertical for the specified depth suitable to receive required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer–in-charge upto beyond 90 metre & upto 150 metre depth below ground level. Rocky strata including Boulders. 150 mm dia. As per SOR Item No. 21.2.2.3 page 198

Development of tube well in accordance with IS : 2800 (part I) and IS:11189, to establish maximum rate of usable water yield without sandcontent (beyond permissible limit), with required capacity aircompressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any otherapproved method, measuring static level & draw down etc. by step drawdown method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tube well, all complete, including hire& labour charges of air compressor, tools & accessories etc., all as perrequirement and direction of Engineer-in-charge. As per SOR Item No. 21.10 page 200

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for bore well of: 150 mm dia As per SOR Item No. 21.11.3 page 200

Supplying, installation, testing and commissioning of submersible pump set for water supply system with submersible motor directly coupled to multi-stage submersible pump of specified discharge capacity, head, delivery size in existing bore well including 2 sets of suitable size holding clamps made out of 50 mm X 6 mm MS flat, connection with suitable submersible cable of standard length etc. as required. 1.0 HP, single phase As per SOR Item No.26.3.1

Supply, installation, testing and commissioning of 1-3 HP 1 phase submersible motor starter cum control wall/ floor mounted type made out of not less than 1.6 mm thick MS sheet and comprising of following panel mounting switchgears there in including connection inter-connection etc. as required. a) Phase indicating lamps with fuses and toggle switches 1 set b) 1/2/3 HP 1 phase DOL starter with over load and no volt relay 1 No c) 25 A "C" curve DPMCB 1 No d) Voltmeter 0-250 V 1 set e) Ammeter 0-10 A 1 set As per SOR Item No.26.11

Supplying and fixing following dia HDPE pipe PE-80 Grade (8kg/sqcm) in single length in the suction/ delivery line of water supply pump etc. as required. 32 mm outer dia As per SOR Item No.26.6.1

Supplying, laying and fixing following size submersible cable along with GI/PVC/HDFC pipe line or laid in ground etc as required 3x4.00 sqmm As per SOR Item No.26.14.3

Supplying and making water proof joint with heat shrinkable joint kit including copper ferrules for following size of 3 core submersible copper conductor cable of 1.1 KV grade as required. 3x4.00 sqmm As per SOR Item No.26.15.3

Say Rs. In Lacs

Assistant Engineer CG State Agriculture Marketing (Mandi) Board Division Office, Raipur