Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
| 2 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
Tender Value
Refer Docs
EMD Value
₹10.3 L
Closing Date
17 Oct 2022, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer
O/o Executive Engineer Kalaktang Division, PWD, Kalaktang, AP.
Construction of Circuit House at Balemu, West Kameng District.
2022_PWDAP_882_1
KTD/Tender-08/2022-23
Open Tender
Civil Works
Item Rate
1095 days
Balemu
Please refer Tender documents.
4 documents required · 4 mandatory
₹10,000
EE, Kalaktang Division, PWD, AP, Kalaktang.
₹10.3 L
Yes
Kalaktang
19 Oct 2022
4 Oct 2022
19 Oct 2022
4 Oct 2022
17 Oct 2022
4 Oct 2022
11 Oct 2022
Amount
SH:-RCC FRAMED STRUCTURE WITH G+2 FLOOR AS PER ATTACHED DRAWINGS. - 1541.26 Sqm
EARTH WORK
Excavation in Hill Area in Soil by Mechanical Means Excavation in soil in hilly area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 1000 metres.
Excavation in Hilly Area in Ordinary Rock by Mechanical Means not Requiring Blasting Excavation in hilly area in ordinary rock not requiring blasting by mechanical means including cutting and trimming of slopes and disposal of cut material with all lift and lead upto 1000 metres.
Earth work in excavation in foundation trenches not exceeding 1.50 m width or 10 Sq.m. on plan or drains not exceeding 1.50 m in width or 10 Sq.m. on plan including dressing of sides and ramming of bottoms, lift upto 1.50 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
a) Ordinary Soil
a) Hard Soil
Re-filling excavated earth in foundations and plinth etc. in 15 cm layer including ramming and watering etc. complete.
Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete.
CEMENT CONCRETE
Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) excluding the cost of centring and shuttering in : a) Foundations and plinth
Walls including attached buttresses, pilasters and their caps and bases and string courses etc.up to floor two level.
Centring and shuttering including strutting proping etc. and removal of form work for: Walls including attached buttresses, pilasters etc.
Providing and laying in foundations and plinth cement concrete 1 : 4 : 8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering
RCC WORK
Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in : a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement. a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement. a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
Reinforced cement concrete work in stair cases (excluding landing) except spiral cases including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface, preparing of the top surface and finishing, nosing upto floor two level but excluding the cost of centring, shuttering and reinforcement with M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
Reinforced cement concrete in chajjas exceeding 15mm in thickness upto floor two level including centring and shuttering complete but excluding the cost of reinforcement with M20 1 : 1.5 : 3 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size).
Centring and shuttering including strutting, propping etc and removal of form work for :
a) Foundation, footings, bases of columns etc. and mass concrete.
b) Column, pillars, posts and struts etc.
c) Lintels, beams, girders, bressumers and cantilevers etc.
d) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height).
e) Stairs (excluding landings) except spiral stair cases.
Reinforcement of RCC work including bending, binding and placing in position complete. b) Tar/TMT steel
BRICK WORK
Brick work with best available local bricks in foundations and plinth in cement mortar 1:6 (1 cement : 6 fine sand).
Extra for brick work with best available local bricks in superstructure above plinth level up to floor two level.
Half brick masonry (with best available local bricks) in cement mortar 1:4 (1 cement : 4 coarse sand) in foundation and plinth.
Extra for half brick masonry in superstructure above plinth level and up to floor two level.
ALUMINIUM WORKS
Providing and fixing anodised aluminium door complete with fixing clips rubber beading and fixing glazed plate including cost of 12mmthick float glass shutters for doors panes ISI mark, door spring brass bolt and locking arrangement (mortic lock) and all fixing arrangement which is required for fixing the door/windows
Providing and fixing anodised aluminium door complete with fixing clips rubber beading and fixing glazed plate including cost of 5mm thick glass panes ISI mark, door spring brass bolt and locking arrangement (mortic lock) and all fixing arrangement which is required for fixing the door/windows
WOOD WORKS
Providing approved best available local wood (Class - B II) work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position.
Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including black enamelled MS butt hinges with necessary screws. a) 38mm thick best available local wood class - B I
Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1 : 3 : 6 (1 cement : 3 sand : 6 hard stone chips 20 mm nominal size).
Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws. a) Plain Grills
Providing and fixing aluminum sliding door bolts anodised transparent or dyed to required color or shade with nuts and screws etc complete. a) 300 X 16
Providing and fixing aluminum Tower bolts anodized or transparent or dyed to required color or shade with necessary screws etc complete. a) 250 x 10 mm
Providing and fixing aluminum Handles anodised transparent or dyed to required color or shade with necessary screws etc complete.
STEEL WORK
Providing and fixing MS round holding down bolts with nuts and washer plates etc complete.
Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer welded and bolted including special shaped washers etc complete.
FLOORING
Chequrred terrazzo tiles 22 mm thick with marble chips of sizes upto 6mm in floors on 25 mm thick bed mortar 1 : 3 (1 cement : 3 coarse sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete: a) Light shades using white cement
White glazed tiles 5mm.thick in flooring, skirting, risers of step and dado in 12 mm thick cement plaster 1 : 3(1 cement: 3 coarse sand) painted with white cement slurry.
VITRIFIED TILES FLOORING
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and confiorming to IS : 15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement:4 coarse sand), including grouting the joints with white cement and matching pigments etc.., complete. b) Size of Tile 600x600 mm
VITRIFIED TILES SKIRTING
Providing and laying vitrified tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and confiorming to IS : 15622 of approved make, in all colours and shades, in skirting, riser of steps, over 12mm thick bed of cement mortar 1:3 (1cement : 3 coarse sand), including grouting the joints with white cement and matching pigments etc.., complete. b) Size of Tile 600x600 mm
ROOFING
Providing tata durashine colour coated roofing sheet manufactured from zinc/aluminum alloy coated sheet roofing fixed with galvanised iron J or L hooks, bolts & nuts 8 mm dia with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete, excluding the cost of purlins, rafters and trusses. a) 0.63 mm thick GI sheet
Providing ridges or hips 60 cm overall in plain tata durashine colour coated roofing sheet manufactured from zinc/aluminum alloy coated sheet fixed with galvanised iron J or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete.
Providing and fixing MS fan clamp type I of 16 mm dia MS bar bent to shape with hooked ends in RCC slabs during lying including painting the exposed portion of loop all as per standard design complete.
Extra for providing and fixing wind ties of 40 x 6 mm flat iron section.
Providing and fixing on wall face C.I. rain water pipe including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1 : 2 ( 1 cement : 2 fine sand). a) 100 mm dia pipe
Providing and fixing M.S. Holder bat clamps of approved design of C.I. or S.C.I. pipes embedded in and including cement concrete block 10 cm x 10 cm x 10 cm of 1 : 2 : 4 mix (1 cement : 2 coarse sand: 4 stone aggregate 20mm nominal size) including cost of cutting holes and making good the wall etc. a)100 mm diameter pipe
Providing and fixing on wall face C.I. accessories for rain water pipes including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1 : 2 ( 1 cement: 2 fine sand). a) CI Plain bend i)100 mm diameter pipe
b) CI head flat or corner type bend : a)100 mm diameter pipe
FINISHING
CEMENT PLASTER :
12 mm cement plaster 1 : 4 (1 cement : fine sand).
15 mm cement plaster 1 : 6 (1 cement : 6 fine sand) on the rough side of single or half brick wall.
Neat cement punning.
DISTEMPERING :
Applying one coat of cement primer of approved brand and manufacture on wall surface.
Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade on new work (three or more coats) to give an even shade.
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
Applying one coat of distemper primer of approved brand and manufacture on wall surface.
Distempering (two or more coats) with oil bound washable distemper of approved brand and manufacture and of required shade on new work over and including a priming coat with distemper primer of approved brand and manufacture to give an even shade.
Applying priming coat with ready mixed pink primer of approved brand and manufacture on wood work complete.
Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on new work to give an even shade.
Applying priming coat with ready mixed primer of approved brand and manufacture on steel work.
Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade.
MISCELLANEOUS
Making plinth protection 50 mm thick of cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 stone aggregate using 20 mm nominal size) over 75 mm bed of stone ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finsihing the top smooth.
Providing and fixing 40 mm dia GI Pipe outlet in cement mortar 1 : 3 (1 cement : 3 fine sand) including cutting and making good the wall.
Providing and fixing heavy duty stainless steel tube railing 1.00 m high with 10 x 5 cm top and bottom rails 10 x 5 cm sides and 7.5 cm x 5 cm intermediate vertical bars placed at 22.5 cm centre to centre.
DRAINAGE
Construction of cement concrete drain 30 cm wide and 23 cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips/shingle 40 mm and down gauge) 8 cm thick on sides and bottom and plastering on all exposed surfaces with 12 mm thick cement mortar1 : 3 (1 cement : 3 fine sand) including shuttering complete.
Constructing brick masonry manhole with 2nd class bricks in cement mortar 1 : 5 (1 cement :5 fine sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone single 20 mm nominal size), foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse sand : 8 stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) neatly finished complete as per standard design. a) Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 Kg (weight of cover and frame to be not less than 38 kg, (weight of cover 23 Kg and weight of frame 15 Kg).
Making soak pit 2.50 m dia 3 m deep with 45 x 45 cm dry brick honeycomb shaft and SW drain pipe 100 mmdia 1.80 m long complete as per standard design.
WATER TANK
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
TRADETIONAL ARCHITECTURAL FEATURE
Extra for providing steel eave board and tradetional art & painting work on Chajjas and wall surface etc complete.
SH:- FALSE CEILING
False Ceiling: Supply and installation of 12.5mm thick plain gyspum plaster board Suspended by using C System which includes Main channel at every 1200mm . The suspension is done with all accessories like cleat, leveling clips & wire rods as per the dwgs.along the perimeter as indicated in the drawing, The gypsum plaster board will be back lined with 65mm thick 1000GSM polyester wool. The Gypsum board will be painted as per the approved colour by the department.
SH:-WATER SUPPLY
Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls (internal work). b) 15mm nominal bore
Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc (external work). a) 20mm nominal bore
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.. a) 15mm nominal bore
Providing and fixing Bib Cock 2-in-1 with wall flange of approved quality. a) 15mm nominal bore
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. a)15mm nominal bore
b)20mm nominal bore
Providing and fixing CPT pillar cock of approved quality and colour. A) 15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms a)15mm nominal bore
Hinware Flora Chrome Brass Wall mixer 3-in-1 system with provision for Hand & overhead shower with 190 mm hose and hook
Providing and fixing Rainfall shower 8" with 18" long arm a) 200 mm x200mm
Providing Parryware brass health faucet slimline with hose and hook (Chrome Finish)
Providing and fixing PVC connection pipe with brass union. A) 30 cm length a) 15 mm nominal bore
SH:-SANITARY
Providing and fixing white Parryware Activa S-220 Floor mounted European type WC pan size 670 x 355 x 750mm with 3 Litres half flush making good the walls and floors where required.
Providing and fixing white vitreous china water closet squating pan (Indian type WC pan) size 580 mm with 100 mm and sand cast iron P or S trap, 12.5 Litre high level CI flushing cistern (of approved make) with fittings RS or CI brackets, 32 mm dia galvanized steel telescopic flush pipe with fittings and clamps 20 mm GI over flow pipe with specials and mosquito proof coupling of approved municipal design and GI chain and pull complete including painting of cistern and fittings, cutting and making good the walls and floors where required. a) Long Pan patten WC Pan
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x430x265 mm sizes respectively with CI automatic flushing cistern with fittings, RS or CI brackets standard size galvanized steel flush pipe and spreaders with brass unions and GI clamps complete including painting of cistern and fittings, cutting and making good the walls and floors where required. a) One urinal basin with 5 Litres CI automatic flushing cistern
Providing and fixing white vitreous china wash basin with RS or CI brackets painted white 15 mm CP brass pillar taps and CP brass chain with rubber plug 32 mm CP brass waste of standard pattern, 32 mm dia CP brass trap and MI unions complete, including cutting and making good the walls where required.
Providing and fixing Stainless steel kitchen sink Elegance 5mmx510mmx241mm manufacture by NIRALi with RS or CI brackets painted white complete, including cutting and making good the walls where required.
Providing and fixing Ovel Mirror in 80mm & 60mm manufacture by Parryware with CP brass screws and washers.
Providing and fixing Plantex Premium bathroom acessories Acrylic + Stainless steel transparent - Matt Glass Shelf for bathroom & Kitchen
Providing and fixing towel rail complete
Providing and fixingTowel ring of approved quality.
Providing and fixingTowel bracket 61 cm of approved quality.
Providing and fixing PTMT Soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fitting arrangements, weighing not less than 106 gms
Providing and fixing 100 mm Stainless grating for gulley, floors or nahni trap.
Providing laying and jointing glazed stone ware pipe grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. a)100mm dia
Providing and fixing sand cast iron/ cast iron (spun) soil, waste and vent pipes. a)100mm dia
Providing and fixing sand cast iron hel rest sanitary bend
a) 100 mm dia
b) 75 mm dia
SH: MODULAR KITCHEN
Providing and fixing L - shaped Moduler Kitchenwith 12 Basket drawers, corner basket and trays,Tandem boxes with unique sliding system and swing-out system etc complete.
Faber 75 cm, 1350m3/hr., Auto-clean angular Kitchen Chimney HOOD Zenith FL SC AC BK 75, Filterless technology, Touch & Gesture control.
SH: FIRE HYDRANT SYSTEM
Two way FB Connection Gun Metal
Hydrant Valve 63mm 1Psc (IS: 937) Stainless Steel
Short Branch pipe 63mm 1psc (IS: 903) Stainless Steel
RRL Hose 63mmx30mtr(1Psc) (IS: 636) Stainless Steel
Manual Swing Hose Reel Drum (IS: 844) with company fitted 30Mtr.
Hose Box (24"x24"x10") for 30 Mtr.
MS Pipe 4" Dia x 20"
MS Pipe 3" Dia x 20"
MS Pipe 6" Dia x 20"
MS 4" Band
MS 6" Band
Two way Flange
Flange 200
Gate Valve 4"
Foot Valve
Non Return Valve with Flange
Tap Putting
Jokey Pump Kilosker DB-32/20 (180LMP/6 Head)2x21/2pump with 10HP Motor including all
Nut Bolt and Gusket
Sintex Tank 5000 Ltr Capacity
Installation, Fabrication & Fitting Charges
SH:- FURNITURE
Supplying & cartage of following materials.
Adriana Single Bed of Godrej Make
Jurina King Bed of Godrej Make (King size)
Writing table T-8 of Godrej Make
Chair -7112 R of Godrej Make
Vida Sofa (5 seater-triple seater - 1 & Single seater - 2) of Godrej Make for Guest Room
Jineiro Sofa (5 seater-triple seater - 1 & Single seater - 2) Godrej Make for VIP Room
Jineiro Sofa (5 seater-triple seater - 1 & Single seater - 2) Godrej Make for Waiting Lounge
Sofa set cover
Wooden Peg Table
Wooden Peg Table (VIP Room)
Jurina 3 Door Wadrobe with Mirror
Victoria Centre table
SONY BRAVIO Colour TV (43" ) LED for VIP Rooms
SONY BRAVIO Colour TV (32" ) LED for common Rooms
Computer set with UPC & Colour printer (For Reception)
Kurlon Pillow
Bed sheet ( single ) with Pillow Cover
Bed sheet ( King Size ) with Pillow Cover
Kurlon metress (single)
Kurlon metress (King Size)
Chineese Blanket (Single)
Chineese Blanket (King Size)
Exhaust fan
Commercial gas stove with pipe line system complete.
Plastic bucket
Plastic mug
Dustbin (Stainless steel)
Door mat (small)
Door mat (big) Grass type
Decorative type curtain rod Door/Window
Curtain for window and door
Ash tray
Reception Table 3ARC Decorative Laminate top of Godrej Make
Reception Chair 7101R of Godrej Make
Decorative type flower pot with artificial flower plant & filled with stone chips
Jewel Dining table of godrej Make
Jasper Dining Chair of godrej Make
Dining table cloth
White cotton handcarchief
Refreezerator (Fridge)
Conference table
Conference chair
CC TV Camera with Monitor (4 Cameras)
Electrict Iron (Bajaj)
Electric Room Heater (Bajaj)
Bedside Table for VIP Room
LG Semi Automatic Washing Machine of 14.00 Kg
Water Purifier Kent
Zurina Dressing Table with stool
SH:- UTENSILS
Hot case (big) (Steel)
Hot case (Medium) (Steel)
Aluminium Dekchi (20Kg capacity)
Aluminium Dekchi (10kg capacity)
Aluminium Dekchi (5kg capacity)
Aluminium Dekchi (4kg capacity)
Aluminium Dekchi (3kg capacity)
Aluminium Dekchi (2kg capacity)
Cast iron kadai (big)
Cast iron kadai (small)
Jug (Borosil)
Jug (plastic 2 ltr cap.)
Pressure cocker (10/12 Ltr. Cap.)
Pressure cocker (20Ltr. Cap.)
Bowl (bone china) (Medium size)
Quater plate ( Bone china )
Tea set (bone china)
Dinner set cum tea set of 52 Pcs.
Service spoon steel
Desert spoon
Desert Fork
Frying pen (Non stick)
Tea suspen
Iron tawa
Glass bowl (small)
Tea spoon cum sweet spoon
Service rice spoon
Milton Thermos
Ordinary tea cup & plate
Aluminium tray (extra large size)
Plastic tray (big)
Plastic tray (small)
Food warmer (big size) (wax system)
Stailless steel water filter (3-4 candle system)
Borosil glass
Ordinary glass
Rice plate (bone china)
Morning tea set for VIP
Tea quaze
Gas stove big single burner
Wax (cake)
Electric Iron (light)
Glass Donga with lid
SH:- BOUNDARY WALL - 295.00 Mtr
EARTH WORK
Earth work in excavation in foundation trenches not exceeding 1.50 m width or 10 Sq.m. on plan or drains not exceeding 1.50 m in width or 10 Sq.m. on plan including dressing of sides and ramming of bottoms, lift upto 1.50 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
a) Ordinary Soil
a) Hard Soil
CEMENT CONCRETE
Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) excluding the cost of centring and shuttering in : a) Foundations and plinth
RCC WORK
Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in : a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement. a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement. a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
Providing and laying up to floor two level in cement 1:1.5:3 (1 cement:1.5 coarse sand:3 stone aggregate 20 mm nominal size) including centering shuttering in : (b) String courses, coping bed plates, anchor blocks, plain window sills and the like
Centring and shuttering including strutting, propping etc and removal of form work for :
a) Foundation, footings, bases of columns etc. and mass concrete.
b) Column, pillars, posts and struts etc.
c) Lintels, beams, girders, bressumers and cantilevers etc.
d) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
Reinforcement of RCC work including bending, binding and placing in position complete. b) Tar/TMT steel
BRICK WORK
Brick work with best available local bricks in foundations and plinth in cement mortar 1:6 (1 cement : 6 fine sand).
Extra for brick work with best available local bricks in superstructure above plinth level up to floor two level.
Half brick masonry (with best available local bricks) in cement mortar 1:4 (1 cement : 4 coarse sand) in foundation and plinth.
Extra for half brick masonry in superstructure above plinth level and up to floor two level.
FINISHING
CEMENT PLASTER :
12 mm cement plaster 1 : 4 (1 cement : fine sand).
POINTING
Pointing on brick work with cement mortar 1 : 3 (1 cement : 3 fine sand). (c ) Cut or weather struck pointing.
DISTEMPERING :
Applying one coat of cement primer of approved brand and manufacture on wall surface.
Finishing walls with water proofing cement paint of approved brand and manufacture and required shade on new work (three or more coats) to give an even shade.
SH: CEMENT CONCRETE INTERLOCKING PAVER BLOCK FLOOR - 600.00 Sqm
Excavation in Hill Area in Soil by Mechanical Means (Dipositing of excavated earth with all lifts and lead upto 1000 m Excavation in soil in hilly area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 1000 metres.
Excavation in Hilly Area in Ordinary Rock by Mechanical Means not Requiring Blasting (Disposal of cut material with all lift and lead upto 1000 m) Excavation in hilly area in ordinary rock not requiring blasting by mechanical means including cutting and trimming of slopes and disposal of cut material with all lift and lead upto 1000 metres.
Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size,design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
SH.: ENTRANCE GATE - 1 No.
EARTH WORK
Earth work in excavation in foundation trenches not exceeding 1.50 m width or 10 Sq.m. on plan or drains not exceeding 1.50 m in width or 10 Sq.m. on plan including dressing of sides and ramming of bottoms, lift upto 1.50 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
a) Ordinary Soil
a) Hard Soil
Re-filling excavated earth in foundations and plinth etc. in 15 cm layer including ramming and watering etc. complete.
Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification.
CEMENT CONCRETE
Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) excluding the cost of centring and shuttering in : a) Foundations and plinth
RCC WORK
Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in : a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement. a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement. a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
Centring and shuttering including strutting, propping etc and removal of form work for :
a) Foundation, footings, bases of columns etc. and mass concrete.
b) Column, pillars, posts and struts etc.
c) Lintels, beams, girders, bressumers and cantilevers etc.
d) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height).
Reinforcement of RCC work including bending, binding and placing in position complete. b) Tar/TMT steel
BRICK WORK
Half brick masonry (with best available local bricks) in cement mortar 1:4 (1 cement : 4 coarse sand) in foundation and plinth.
Extra for half brick masonry in superstructure above plinth level and up to floor two level.
FINISHING
CEMENT PLASTER
12 mm cement plaster 1 : 4 (1 cement : fine sand).
Extra for plastering done on mouldings cornices or architraves including neat finishing to the line and level.
DISTEMPERING
Applying one coat of cement primer of approved brand and manufacture on wall surface.
Finishing walls with water proofing cement paint of approved brand and manufacture and required shade on new work (three or more coats) to give an even shade.
Extra providing RCC work with local traditional architraves plastering including cost of centering, shuttering, reinforcement and traditional ornamental painting work etc complete
MS Gate (Double Leaf - 1Nos. & Single Leaf - 2Nos.
Providing and fixing MS gate 3.60 x 1.80m (Double leaf) using MS angle iron 50 x 50 x 60mm, MS square bars 20mm as per approved drawings and design, cutting, fitting, fixing and welding including a coat of red oxide primer and painting the gate with superior ready mix paint, complete as per direction of Engineer in-charge.
Providing and fixing MS gate 0.90 x 1.80m (Single leaf) using MS angle iron 50 x 50 x 60mm, MS square bars 20mm as per approved drawings and design, cutting, fitting, fixing and welding including a coat of red oxide primer and painting the gate with superior ready mix paint, complete as per direction of Engineer in-charge.
Providing and fixing MS hold fast of required size
Providing and fixing and commissioning of Kiloskar Green DG set 62.5 KVA, 50KW,III phase with necessary accessories.
M/S KONCHO TAMPHEL
stage.html
html • 0.02 MB
finance_991.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .