Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.6 LAccepted-Finance | ₹4.6 L | L1 | Accepted-Finance LOWEST QUOTED AMOUNT |
| 2 | L2₹5.0 LRejected-Finance | ₹5.0 L | L2 | Rejected-Finance BELOW THE ESTIMATE RATE |
| 3 | L3₹5.3 LRejected-Finance | ₹5.3 L | L3 | Rejected-Finance BELOW THE ESTIMATE RATE |
| 4 | L4₹5.6 LRejected-Finance 169 PERAMIUM KOLATHUPALAYAM VIA DHARAPURAM 638 656 | TIRUPPUR | TAMIL NADU | 638656 | ₹5.6 L | L4 | Rejected-Finance BELOW THE ESTIMATE RATE |
| 5 | L5₹5.6 LRejected-Finance | ₹5.6 L | L5 | Rejected-Finance ABOVE THE ESTIMATE RATE |
| Sl No | Description | Qty | Unit | Kanganam Construction H3 | SUNMATHI CONSTRUCTIONS H2 | V.V Traders H4 | Real Tech GPS Private Limited H6 | Tiger Jump Telematic Solutions H5 | Enthu Technology Solutions India Pvt Ltd H1 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00Electromagnetic Flow Meter shall be a velocity sensing Electromagnetic type, microprocessor based signal converter, sealed housing, flanged tube meter for 1.0 M pa working pressure, manufactured to highest standard available for mag-meters, equipped with minimum six digit digital totalizers, reading in units of (kiloliters/ cubic meter) and shall be accurate within 0.5% of Measured value, shall operate within a range of 0.3m/sec to 4 m/sec and be constructed as follows: Meter tube (Sensor) shall be fabricated from stainless steel tube and use class PN10 flat face carbon steel flanges in accordance with IS 1538. These flanges shall be welded to the flow tube. The internal and external of the meter tube shall be blasted to near white and lined with hard rubber/Polyurethrene/ PTFE preferably by SBR or EPDM.Meter tube shall have a constant nominal inside diameter offering no obstruction to the flow. The accuracy should be inclusive of linearity, hysteresis, repeatability, temperature and pressure effects Coil Housing shall be fabricated from stainless steel (SS 304) with Anticorrosive paint for corrosion resistance and welded to the tube providing a completely sealed environment for all coils, electrode connections and wiring harness capable of submerged or buried operation with IP 68 Protection. Signal Converter shall be pulsed DC coil excitation type with auto zeroing. The signal Converter shall be remotely mounted away from the meter. The converter shall indicate direction of flow and provide a flow rate indication and a total of flow volume for both forward and reverse Directions. The converter shall provide an isolated 4-20 mA output into minimum 500-ohm load and a frequency output of a maximum of 0-10 KHZ and a scaled pulse output, Communication inter face is RS485, HART output, . The microprocessor based signal converter shall have a self-diagnostic test mode and a backlit display that continuously displays “Rate of Flow” and “Total Volume”. Converter shall be supplied with a programmable low flow drop out Higher flow and empty pipe zero return. The signal converter housing should be die-cast aluminum with glass window. The converter cum transmitter should be fully programmable form the front facial. The Programming should be user friendly, self-prompting menu driven. Flow meter test calibration (400mm dia Flow Meter) | |||||||||
| 1.01 | 150mm dia Flow Meter | 2 | 1 No (Each) | 1,22,200 ₹2,44,400 | 1,22,200 ₹2,44,400 | 1,21,220 ₹2,42,440 | 1,22,200 ₹2,44,400 | 1,22,200 ₹2,44,400 | 95,447.2 ₹1,90,894.4 Lowest |
| 1.02 | 100mm dia Flow Meter | 1 | 1 No (Each) | 1,04,300 ₹1,04,300 | 1,04,300 ₹1,04,300 | 1,03,358 ₹1,03,358 | 1,04,358 ₹1,04,358 | 1,04,358 ₹1,04,358 | 82,662.8 ₹82,662.8 Lowest |
| 2.00 | Supply and delivery of 150 MM MS pipe | 3 | 1 No (Each) | 5,880 ₹17,640 | 5,880 ₹17,640 | 11,000 ₹33,000 | 2,160 ₹6,480 Lowest | 3,750 ₹11,250 | 22,240 ₹66,720 |
| 3.00 | Supply and delivery of standard 150 MM MS
flanges | 8 | 1 No (Each) | 3,200 ₹25,600 | 3,300 ₹26,400 | 2,500 ₹20,000 | 1,300 ₹10,400 Lowest | 3,200 ₹25,600 | 7,080 ₹56,640 |
| 4.00 | Supply and delivery of standard 100 MM MS
flanges | 4 | 1 No (Each) | 2,650 ₹10,600 | 2,700 ₹10,800 | 2,500 ₹10,000 Lowest | 2,680 ₹10,720 | 2,650 ₹10,600 | 15,160 ₹60,640 |
| 5.00 | Labour Charges for erection and commissioning of 100 MM – 1 No, 150 MM – 2 Nos Electromagnetic Flow Meter inclusive of labour charges earth work, gas cutting, welding, and erection of all allied materials etc., complete as directed by Municipal officers. | 3 | 1 No (Each) | 23,650 ₹70,950 | 23,700 ₹71,100 | 14,000 ₹42,000 | 4,500 ₹13,500 Lowest | 10,000 ₹30,000 | 21,240 ₹63,720 |
Tender Value
₹5.7 L
EMD Value
₹5,700
Closing Date
30 Jul 2026, 3:00 pmClosed
The Municipal commissioner
The Municipal commissioner, Vellakovil municipality,Vellakovil, 638111
Supply and fixing of and Electromagnetic Flow Meter at Kallukuttaimedu Outlet Line in Vellakovil Municipality
2026_MAWS_685925_1
0961/2026/E1
Open Tender
Civil Works - Water Works
Works
90 days
Vellakovil
Supply and fixing of and Electromagnetic Flow Meter at Kallukuttaimedu Outlet Line in Vellakovil Municipality
2 documents required · 2 mandatory
₹0
₹5,700
8 Aug 2026
15 Jul 2026
30 Jul 2026
15 Jul 2026
30 Jul 2026
15 Jul 2026
15 Jul 2026 - 30 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Electromagnetic Flow Meter shall be a velocity sensing Electromagnetic type, microprocessor based signal converter, sealed housing, flanged tube meter for 1.0 M pa working pressure, manufactured to highest standard available for mag-meters, equipped with minimum six digit digital totalizers, reading in units of (kiloliters/ cubic meter) and shall be accurate within 0.5% of Measured value, shall operate within a range of 0.3m/sec to 4 m/sec and be constructed as follows: Meter tube (Sensor) shall be fabricated from stainless steel tube and use class PN10 flat face carbon steel flanges in accordance with IS 1538. These flanges shall be welded to the flow tube. The internal and external of the meter tube shall be blasted to near white and lined with hard rubber/Polyurethrene/ PTFE preferably by SBR or EPDM.Meter tube shall have a constant nominal inside diameter offering no obstruction to the flow. The accuracy should be inclusive of linearity, hysteresis, repeatability, temperature and pressure effects Coil Housing shall be fabricated from stainless steel (SS 304) with Anticorrosive paint for corrosion resistance and welded to the tube providing a completely sealed environment for all coils, electrode connections and wiring harness capable of submerged or buried operation with IP 68 Protection. Signal Converter shall be pulsed DC coil excitation type with auto zeroing. The signal Converter shall be remotely mounted away from the meter. The converter shall indicate direction of flow and provide a flow rate indication and a total of flow volume for both forward and reverse Directions. The converter shall provide an isolated 4-20 mA output into minimum 500-ohm load and a frequency output of a maximum of 0-10 KHZ and a scaled pulse output, Communication inter face is RS485, HART output, . The microprocessor based signal converter shall have a self-diagnostic test mode and a backlit display that continuously displays “Rate of Flow” and “Total Volume”. Converter shall be supplied with a programmable low flow drop out Higher flow and empty pipe zero return. The signal converter housing should be die-cast aluminum with glass window. The converter cum transmitter should be fully programmable form the front facial. The Programming should be user friendly, self-prompting menu driven. Flow meter test calibration (400mm dia Flow Meter) | |||||
| 1.01 | 150mm dia Flow Meter | 2 | 1 No (Each) | - | - |
| 1.02 | 100mm dia Flow Meter | 1 | 1 No (Each) | - | - |
| 2 | Supply and delivery of 150 MM MS pipe | 3 | 1 No (Each) | - | - |
| 3 | Supply and delivery of standard 150 MM MS
flanges | 8 | 1 No (Each) | - | - |
| 4 | Supply and delivery of standard 100 MM MS
flanges | 4 | 1 No (Each) | - | - |
| 5 | Labour Charges for erection and commissioning of 100 MM – 1 No, 150 MM – 2 Nos Electromagnetic Flow Meter inclusive of labour charges earth work, gas cutting, welding, and erection of all allied materials etc., complete as directed by Municipal officers. | 3 | 1 No (Each) | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
finance_824523.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.64 MB
BOQ_824523.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].