Outsourcing the Resources for Operation and Management of Water Supply Installation of Army Pump House and Tech Pump House at Air Force Station Jaisalmer.

Amount

Schedule 'A' Part-I General Note as applicable for serial item No 2.00 & 3.00 of BoQ/Sch 'A' Contractors attention is hereby invited that estimated cost of serial item No 2.00 & 3.00 is Rs. 12,06,000.00 based on prevailing rates of Schedule of Minimum fair wages. Quoted amount against serial item No. 2.00 & 3.00 is less than the amount the work (Estimated of serial item No. 2.00 & 3.00 of BoQ/Sch 'A') then lowest bidder will have to deposit FDR in favour of Accepting Officer within 07 days from financial bid opened difference in Estimated cost & quoted amount of serial item No. 2.00 & 3.00 before evaluation of financial bid for acceptance of tender, failing which lowest tender will not be accepted. FDR submitted at the time of Acceptance of bidder will be realesed only after satisfactory proof of payment of deployed person under the respective serial item No. 2.00 & 3.00 of BoQ.

Manning and Operation of Pump House including DG Set at Tech Area, One FGM (Fitter General Mechanic) in Two shifts (each shift for 8 hours i.e. total 16 hours per day) (including Sunday/Holiday) including operation of tube well for collection of water in raw water sump of softening plant, day to day maintenance such as cleaning the surrounding area of installation building (inside/outside), maintenance/back wash of multi grade filter, motor/pump, DG set, starter and panel board regularly. Weekly softening media to be re-charged through salt water (salt to be supplied by department) and all valve to be checked. All valves to be operated concerned with installation on requirement basis complete all as directed by Engr-in-Charge.

Manning and Operation of Pump House including Operation of DG set installed at Pump House Army Area at Jaisalmer. One FGM (Fitter General Mechanic) in three shift each shift for 8 hours continuous operation every day (total 24 hours) including Sunday/Holiday including operation of control valves (sluice valve/gate valves), day to day maintenance such as cleaning the surrounding area of installation building (inside/outside), maintenance of motor/ pump, DG Sets, starter and panel board regularly. All valves to be checked and operated concerned with installation on requirement basis complete all as directed by Engr-in-Charge. Notes for serial item No. 2.00 & 3.00:- (i) The payment shall be made to the workers through a nationalised bank and bank statement of fair wages as per minimum labour wages as mentioned above shall be submitted alongwith the RARs/FB for payments by the contractor. (ii) The contractor shall be responsible for the EPF, ESI, bonus, Safety etc. and insurance of all trademen employed by contractor as per existing Labour Rules/Acts/Regulations. (iii) Contractor special attention is invited that payment of operator/labour shall be made only through Account payee cheque and the same shall be deposited in Aadhar link account of operator/labour. Documentary evidence for the same shall be submitted to Engineer-in-Charge before payment of RAR/Final bill submitted by Tenderer.

Note for serial item No. 2.00 & 3.00 (Contd....) (iv) Contractor and his personnel detailed for management and operation of Pump house shall be responsible for serviceability of Pumpset, Diesel engine generating set, valves. In case of any major fault occurs in above mentioned items, he will be report directly to concerned JE E/M/AGE E/M. Person deputed for operation will be responsible for minor maintenance such as checking of oil, checking of Diesel, oiling and greasing of valves, drawing disinfectant from MES and pouring it to dozing system to maintained required PPM level as per IS norms, informing MES and maintaing sufficient balance in storage tank for DG set as and when required, checking of battery terminal and cleaning of DG Sets, Pumpset, valves cleaning of Pump house room and surrounding areas complete all as per directed by Engr-in-Charge. (v) Necessary weekly off will be given to manpower employed for this schedule as per existing rules and regulation of state/central govt and necessary replacement will be provided by the contractor. Rates quoted for this schedule shall deemed to be included this provision.

Note for serial item No. 2.00 & 3.00 (Contd....) (vi) In case absence of any operator/ workmen from any shift will be penalized with a penalty of double the rate quoted by the contractor in addition to the shift not taken in to consideration for payment. Attendant/Operator wanting leave will get it sanctioned before proceeding on leave alongwith the name of individual who will be performing his duty/shift in his absence. No replacement of operator/workmen without the knowledge of department will be allowed. (vii) Safety equipment's, tools and first aid kit will be provided to all tradesman without any extra cost to government by the Tenderer. (viii) Log book (Sheet), Muster roll, duty roster, fuel consumption register, daily breakdown register, attendance register and other requisite registers shall be maintained by operator and get it signed by concerned JE, Engineer-in-charge and contractor on daily basis and same shall be submitted monthly to accepting officer for inspection and other details as specified. (ix) Operator should possess ITI certificate in respective trade or minimum 05 years experience for running of installation and well conversant with the Pump set equipment's with connected panel and opeartion of DG set and must produce qualification and experience certificates duly attested by gazetted officer. The attested certificate shall be submitted to accepting officer at the time of commencement of work. (x) Daily attendance shall be marked in attendance register by the JE Concerned attandance shall be checked weekly at least by the Engr-in-Charge and monthly by the GE.

Note for serial item No. 2.00 & 3.00 (Contd....) (xi) Operator shall be in proper uniform As approved by the GE and cost of uniform included in the rate quoted. (x) Surrounding area shall be kept clean and tidy.Tool required for cleaning is deemed to be included in the quoted rates. (xi) Unit rates quoted by the tenderrs shall deem to include for Nuts, bolts, Washers, Lugs, Thimbles, wires, terminal clamps, disttiled water required for efficient and smooth functioning of the equipment with out any extra cost to the Govt.

Schedule 'A' Part-II Supply only PH corrector/Booster for RO plants

Supply only antiscalant soluton (suitable for RO plants)

Supply only Jambo micro filter candle for RO Plant (threaded), 4.50" (Inches) wound complete as per sample all as specified

S&F in replacement automatic digital starter suitable for RO Plant of capacity 1000 Litre/hour complete all as specified and directed.

S&F in replacement water flow meter (rotameter) suitable for RO Plant of capacity 1000 Litre/hour complete all as specified and directed.

S&F in replacement water flow meter (rotameter) suitable for RO Plant of capacity 2500 Litre/hour complete all as specified and directed.

S&F in replacement Pabbels and Gravels, Fine Sand for FRP vesseel in lot of 50 Kg bags premixed for filling into vessel FRP/PGV vessel and cleaning the around area and repacking the vessel after filling in new items complete by means of packing and fixing material including labour and testing for appropriate pressure complete all as specified and directed by Engr-In-Charge.

S&F in replacement Activated Granular Carbon(Charcoal 900 IV) for 21X62 FRP vesseel in lot of 25 KG bags for filling into vessel including draiing out the existing used Charcoal from FRP vessel and cleaning the around area and repacking the vessel after filling in new items complete by means of packing and fixing material including labour and testing for appropriate pressure including taking down old unserviceable complete all as specified and directed by Engr-In-Charge.

S&F in replacement membrane suitable for RO Plant, flow (GPD) 2355, rejection (%) : 99.67 model No. CPA2-4040 Nitto of Hydranautics or equivalent of Daw, GE, complete all as specified and directed by Engr-in-Charge.

S&F in replacement FRP vessel of size 13X54 (150PSI) Max Design Pressure 0-10 bar for RO plant at Air Force Hospital complete all as per sample. Make: Pentair/Starlite/Aventura or equivalent.

S&F in replacement FRP vessel of size 24X72 (250PSI) for RO plant at Air Force Hospital complete all as per sample. Make: Pentair,Starlite, Aventura or equivalent.

S&F in replacement stainless steel, multistage High pressure pump (vertical type), centrifugal pump capacity upto 5 HP, 3 Phase, 415 volt, from RO plant, dismantling the pump set, replacement of mechanical water seal as per manufacturer's specification, complete servicing the pump set including replacement of bearing and unserviceable items (lock, etc) as required and reassemling complete and refitting at site complete all as specified and directed by Engr-in-Charge.

Supply and provide (Calcium hypo chloride) 65%-70% chlorine including anti corrosive agent content granular desinfectant for water treatment plants much more stable than chlorine gas & stronger than bleaching powder and sodium hypo chloride packed in 45 Kg drum complete all as specified and directed by Engineer-in-Charge. Make : Auafit, Altoch G P (Declibec) or Equivalent. (Note: Test Certificate from government certified lab for each batch of chlorine to be submited at the time of delivery)

S&F in replacement Dozing pump feeder for injecting PH booster, Antiscalent, chlorine with dosing Rate : 6 LPH @ 4 Kg/Sqcm, 400 Max Stroke/ Minute complete all as per site and directed. Make: Aqua/Aventura or equivalent.

Disconnection of all pressure tubes from the RO Plant and taking out all membranes from pressure tubes cleaning the same with citric acid (low pH) and solium hyppchloride (high pH) and complete washing with RO water and re-assembling the same complete all as specified and directed by Engr-in-Charge.

M&L in replacement for RO Plant Stand made up of MS angle iron of size 50X50X6mm thick as per site and fabricated suitable for RO Plant of Capacity 2500 Ltr per Hour complete all as specified and directed.

S&F in replacement Plastic cylindrical sealed disposable sanitiser refill for disinfection of drinking water with arrangement for controlled release of disinfectant in water, suitable for operation through suitable feeder in pressurised line stequa 411E complete all as per site and directed by Engr-In-Charge. Make: Declibac,Potter & Watts/Brio Zing or equivalent

S&F in replacement UV Filter of capacity 40 Watt complete with Lamp suitable for RO Plant of Capacity 3000 LPH.

S&F in replacement UV Filter of capacity 20 Watt complete with Lamp suitable for RO Plant of Capacity 1000 LPH.

S&F in replacement UV Lamp for UV Filter of Capacity 40 watt sutiable for RO of Capacity 3000 LPH.

S&F in replacement UV Lamp for UV Filter of Capacity 20 watt sutiable for RO of Capacity 1000 LPH.

S&F in replacement Centrifugal Self Priming Pump of capacity 0.37 KW/0.5 HP, size 25x25mm with speed 2760 RPM, insulation 'B' Class with max Current 4.2 Amps with head range 6/30 M, Discharge Range 60/10 LPM, Single Phase, 50 Hz, Duty-S1 complete with all fittings as directed.

S&F in replacement Centrifugal Self Priming Pump of capacity 0.75KW/1.0 HP, size 25X25mm with speed 2760 RPM, insulation 'B' Class with max Current 9 Amps with head range 6/30 M, Discharge Range 60/10 LPM, Single Phase, 50 Hz, Duty-S1 complete with all fittings as directed.

S&F in replacement Membrane RO/UF Pressure Vessel for RO Plant of Model Wave-250E-4 with maximum operating pressure 250 PSI (17.6 Bar) with operating temperature range -70C (200F) Min 550C (1310F) Max complete with all fittings.

M&L for 500 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe including disconnecting & taking down the existing water tank complete as specified in SSR Part-I

M&L for 5000 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe including disconnecting & taking down the existing water tank complete as specified in SSR Part-I

S&F in replacement Stainless Steel, Multistage High pressure pump (vertical type), Centrifugal Pump capacity 5.0 HP, 3 Phase, 415 volt, from RO plant, including dismantling the pumpset and taking down old unserviceable centrifugal pump set with motor complete all as specified and directed.

S&F in replacement Stainless Steel, Multistage High pressure pump (vertical type), Centrifugal Pump capacity 3.0 HP, 3 Phase, 415 volt, from RO plant, including dismantling the pumpset and taking down old unserviceable centrifugal pump set with motor complete all as specified and directed.

M&L for rectification of leakage in water main pipe line by necessary excavation (Upto one length of 6 RM) in any type of soil, in any situation/depth including bailing out leakage water by suitable measures, repair to DI/CI pipe of size 200/150mm dia by burning & including lead, spunian, lead wool, leadpig, rubber ring, rubber gasket etc as occuring at site including cutting threading, for addition & alternation and for insertion of fittings all as required. Note : Cost of JCB for lifting of pipe for repair shall part of quoted rates by tenderer.

M&L for rectification of leakage in water main pipe line by necessary excavation (Upto one length of 6 RM) in any type of soil, in any situation/depth including bailing out leakage water by suitable measures, repair to DI/CI pipe of size 100mm dia by burning & including lead, spunian, lead wool, leadpig, rubber ring, rubber gasket etc as occuring at site including cutting threading, for addition & alternation and for insertion of fittings all as required. Note : Cost of JCB for lifting of pipe for repair shall part of quoted rates by tenderer.

M&L for rectification of leakage in water main pipe line by necessary excavation (Upto one length of 6 RM) in any type of soil, in any situation/depth including bailing out leakage water by suitable measures, repair to DI/CI pipe of size 80mm dia by burning & including lead, spunian, lead wool, leadpig, rubber ring, rubber gasket etc as occuring at site including cutting threading, for addition & alternation and for insertion of fittings all as required. Note : Cost of JCB for lifting of pipe for repair shall part of quoted rates by tenderer.

M&L for rectification of leakage in water main pipe line including necessary excavation in any type of soil, in any situation including bailing out leakage water by suitable measures, repair to GI pipes pipes 15/20mm bore and cutting threading, for addition & alternation and for insertion of fittings/accessories (bend, elbow & Tee) complete all as required at site. Note: (i) The rate is deemed to include for one fitting/special (complete unit) as required at site. (ii) Rate quoted shall be deemed to be inclusive of necessary excavation (Upto one length of 6 RM) filling making good the existing surfaces with the necessary T&P, accessories of appropriate size as required complete all as directed by the Engineer-in-Charge.

M&L for rectification of leakage in water main pipe line including necessary excavation in any type of soil, in any situation including bailing out leakage water by suitable measures, repair to GI pipes pipes 25mm bore and cutting threading, for addition & alternation and for insertion of fittings/accessories (bend, elbow & Tee) complete all as required at site. Note: (i) The rate is deemed to include for one fitting/special (complete unit) as required at site. (ii) Rate quoted shall be deemed to be inclusive of necessary excavation (Upto one length of 6 RM) filling making good the existing surfaces with the necessary T&P, accessories of appropriate size as required complete all as directed by the Engineer-in-Charge.

M&L for rectification of leakage in water main pipe line including necessary excavation in any type of soil, in any situation including bailing out leakage water by suitable measures, repair to GI pipes pipes 40mm bore and cutting threading, for addition & alternation and for insertion of fittings/accessories (bend, elbow & Tee) complete all as required at site. Note: (i) The rate is deemed to include for one fitting/special (complete unit) as required at site. (ii) Rate quoted shall be deemed to be inclusive of necessary excavation (Upto one length of 6 RM) filling making good the existing surfaces with the necessary T&P, accessories of appropriate size as required complete all as directed by the Engineer-in-Charge.

M&L for rectification of leakage in water main pipe line including necessary excavation in any type of soil, in any situation including bailing out leakage water by suitable measures, repair to GI pipes pipes 50mm bore and cutting threading, for addition & alternation and for insertion of fittings/accessories (bend, elbow & Tee) complete all as required at site. Note: (i) The rate is deemed to include for one fitting/special (complete unit) as required at site. (ii) Rate quoted shall be deemed to be inclusive of necessary excavation (Upto one length of 6 RM) filling making good the existing surfaces with the necessary T&P, accessories of appropriate size as required complete all as directed by the Engineer-in-Charge.

M&L for rectification of leakage in water main pipe line including necessary excavation in any type of soil, in any situation including bailing out leakage water by suitable measures, repair to GI pipes pipes 80mm bore and cutting threading, for addition & alternation and for insertion of fittings/accessories (bend, elbow & Tee) complete all as required at site. Note: (i) The rate is deemed to include for one fitting/special (complete unit) as required at site. (ii) Rate quoted shall be deemed to be inclusive of necessary excavation (Upto one length of 6 RM) filling making good the existing surfaces with the necessary T&P, accessories of appropriate size as required complete all as directed by the Engineer-in-Charge.

M&L for repairing leakages/run lead joints for spigot/socket CI/DI pipes 300mm bore including Ring, Span yarn, lead and lead wool, rubber ring, rubber gasket other required material and testing after completion all as specified and directed by Engineer-in-charge. Note : (i) The above item will be applicable for Army area and Rajwai area (On main road). (ii) Rate quoted shall be deemed to be included of necessary excavation in hard/dense/rock soil to a depth exceeding 1.50m and not exceeding 3.50m and upto one length of 6 RM including necessary returning filling, removal of soil draining of water if any and making good the existing surface. (iii) The disturbed surface at site to be re maintained upto the setisfaction level of concerned JE and Engr-In-Charge and removal of debris will be the part of quoted rates by the tenderer. (iv) Rates for JCB for lifting of pipe for repairs shall be part of quoted rates by the Tenderer.

M/s Shree Construction Company