E.I. work

Amount

Supplying and fixing double door 6 way Horizontal TPN MCB Distribution board with IP-42/43 protection, on wall with the help of angle /flat iron frame & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment Incl. Supplying and fixing 240 V MCB Isolator/MCB on din rail of it and necessary connection as required. Incoming - 63 A FP MCB Isolator --1 nos outgoing--6-16A SP MCB of Breaking capacity 10kA & C characteristics--18 nos (Make-Legrand/ABB/L&T )

Supplying and fixing 2 + 10 way double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment Incl. Supplying and fixing 240 V MCB Isolator/MCB on din rail of it and necessary connection as required. Incoming - 40 A DP MCB Isolator --1 nos outgoing--6-16A SP MCB of Breaking capacity 10kA & C characteristics--10 nos (Make-Legrand/ABB/L&T)

Supply & fixing 240 V 25ATimer controller for AC machine in SS double door (2+10) way DB enclosure with IP-43 ( Make-L&T ) or equivalent with S&F following electrical accessories & front door key locking arrangement with all connection by finishing the ends of 2 x 4 & 1 x 2.5 copper wire dowels solder less socket by crimping method as to GS earthing attachment on wall with the help of a flat iron frame and mending good damages to original finish Inc. Necessary connections as per direction of EIC:- i) 10kA C-curve,240V 25A DP MCB (L&T/Schindler/ABB)---1 no. ii) 24 Hr programmable digital time switch(L& T/Schindler/ABB)---1 no. iii) 2 pole power contractor (L&T make cat no MNX22/230) ----1 set iv) LED indicator( Red/Green) ---- 1 Set v) 3 Module plate with cover-----1 no. vi) 20A auto-off-bypass SPDT toggle switch(Approved make/reputed make)-----1 no. vii) 10 A Modular type switch-----1 no. viii) Outgoing connection make ELMAX(Approved make)-----1 no ix) Modular starter 25A --- 1 No

Fixing only existing Timer DB on flat iron frame on wall

Supply of 4 Core 25 sqmm XLPE Insulated & Sheathed Armoured stranded Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes [Make Polycab / RR /KEI/ Havells/ Gloster as approved by E.I.C]

Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

Laying of cable as below, on existing Cable Tray and binding with suitable size GI wire.Up to 50 sqmm

Supply & Fixing of perforated GI cable tray with perforation not more than 17.5% suspended from ceiling incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support. 200x50x1.25mm (18SWG) With 25x25x3mm angle iron support

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :4 Core 25 sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : 4 Core 25 sqmm

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required

3 x 22/0.3 (1.5 sqmm)

2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC

2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC

2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20/25/40 mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required

2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC

2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC

2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC

Finishing of the PVC insulated wire ends by socketing with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

3 x 22/0.3 (1.5 sqmm)

2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC

2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC

2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (approved make) partly in 20mm size PVC rigid conduit 'FR' (Brand approved by EIC) [for horizontal run & above false ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board on wall complete with 2 no. “Ph & N” copper bar incl. bakelite/ Perspex top cover 3 mm thick and incl. 175x100x65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [PVC Rigid Conduit only for horizontal run & above false ceiling and vertical run concealed] (Colour of switch and Socket -Black or white as directed by EIC)

Average run 8 mtr

Average run 12 mtr

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching colour) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish (Colour of switch and Socket -Black or white as directed by EIC)

On Board

Cutting channel of 40 mm x 40 mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works

Channel Size : 40 mm x 40 mm 19 mm dia 3 mm thick polythene pipe without earth continuity wire

Channel Size : 43 mm x 43 mm 25 mm dia 3 mm thick polythene pipe without earth continuity wire

Supply & Fixing 240 V, 2 nos. 6A, plug socket with separate 2 nos. 6 A Piano key type switch, (Anchor) on sheet metal switch board embedded in wall incl. S & F 175x100x65mm MS (16SWG) switch board and Bakelite/Perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting Bakelite/Perspex cover and making necessary connections as required (Colour of switch and Socket -Black or white as directed by EIC)

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Anchor) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required (Colour of switch and Socket -Black or white as directed by EIC)

Supply & Fixing 240 V, 2 nos. 20A plug socket with separate 2 nos. 20A Piano key type switch, indicator & 20A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required (Colour of switch and Socket -Black or white as directed by EIC)

Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch, indicator & 20A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required (Colour of switch and Socket -Black or white as directed by EIC)

Supply & Fixing 240 V, 6 A Piano key type switch (Anchor) on sheet metal switch board incl. S & F 100x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supply & Fixing 240 V, 20 A Piano key type switch (Anchor) on sheet metal switch board incl. S & F 100x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supply & Fixing 240 V Piano key type switch/socket as mentioned below (Anchor) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

240 V 20 A Plug Socket without plug top

Supply & Fixing Socket type fan regulator (Step type)(Anchor) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc.

Supplying & Fixing sheet metal inspection box (16 SWG) of the following sizes flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works

100 mm x 100 mm x 65 mm

175 mm x 100 mm x 65 mm

200 mm x 150 mm x 65 mm

Supply & Fixing bakelite / perspex top cover on existing Inspection board by Brass screws

100 mm x 100 mm x 65 mm

175 mm x 100 mm x 65 mm

200 mm x 150 mm x 65 mm

Supply & Fixing 3 way Ceiling rose (Anchor) on PVC round block/bakellite directly on wall/ceiling.

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Legrand/Schneider/Anchor), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 25 A, Modular type starter (Legrand/Northwest/Schneider) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply and Delivery of 4 feet Industrial box type single LED tube fitting incl. Supply & Delivery of 1 no. 240V, 20 W LED Tube (Polycarbonate with heat sink) with glare free light distribution with CCT (5000K-6500K) having minimum luminous efficiency of 100 Lm/ Watt or better & 50,000 LED burning hours or more. [Make- Philips/ Wipro/Lighting Technology/ manufacturer with own NABL accredited lab with valid test certificate] [LED lamps & accessories shall have BEE certification]

Supply and Delivery of 4 feet Industrial box type twin LED tube fitting incl. Supply & Delivery of 2 no. 240V, 20 W LED Tube (Polycarbonate with heat sink) with glare free light distribution with CCT (5000K-6500K) having minimum luminous efficiency of 105 Lm/ Watt or better & 50,000 LED burning hours or more. [Make- Philips/ Wipro/Lighting Technology/ manufacturer with own NABL accredited lab with valid test certificate] [LED lamps & accessories shall have BEE certification]

Supply & Delivery of 240V LED lamps of following wattage with glare free light distribution having minimum luminous efficiency of 100 Lm/ Watt or better & 50,000 LED burning hours or more. [Make- Philips/Wipro/Lighting Technology/ manufacturer with own NABL accredited lab with valid test certificate] [LED lamps & accessories shall have BEE certification] 9W LED Bulb B22 Base

Fixing only single/twin LED light fitting complete with all accessories directly on wall/ceiling with MS "Z" Clamps and suitable size MS fastener, etc. as required

Fixing only single/twin LED light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with suitable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

Fixing only lamp

Supply & Delivery of 230V, 1-Ph, AC ceiling fan of follwing size incl. all accessories. (Make- Crompton / Usha / Orient) [BEE star rated]

Sweep Size- 1200 mm (48"), Wattage ≤ 55 Watt, R.PM ≤ 380, Air Delivery ≥ 210 C.M.M

Sweep Size- 900 mm (36"), Wattage ≤ 45 Watt, R.PM ≤ 450, Air Delivery ≥ 130 C.M.M

Supply of 250V. 50 Hz. 1320 rpm 400 mm cabin Fan (As per make EPC Tempest) having complete metal body and blades and wattage not more than -50 W and min air displacement of 75 cm/min ( Make : Cinni /EPC/Orient )

Supply & Delivery of 220V, Single Phase, 50 Hz A.C heavy duty exhaust fan of following sizes having complete metal body. (Make- EPC/ USHA/Orient CROMTON) [ISI mark, IP55 rated]

225 mm (9"), 4 Blade, RPM ≤ 1400 , Wattage ≤ 45 Watt, Sound level ≤ 49 dB, Air Displacement (In CMH) ≥ 440

300 mm (12"), 4 Blade, RPM ≤ 1420 , Wattage ≤ 90 Watt, Sound level ≤ 56 dB, Air Displacement (In CMH) ≥ 1120

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.

Extra for supplying additional wire for down rod & painting the rod exceeding 30 cm by 2x1.5 sqmm flexible copper wire.

Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991)

Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter:

30 cm Exhaust fan (12")

Supply & Fixing GI louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long)

30 cm Exhaust fan (12")

Cost of Dismantling of all the electrical equipment's like fans, tube lights, power sockets ,distribution boards ,panels etc with one's own tools' and tackle and shifting them properly from site to designated store as per direction of EIC incl mending good damages to original finish

Dismantling charge for existing split type air conditioner and handing it over to the store house /section office as per instruction of EIC

Installation the outdoor & indoor unit, after laying & connecting the pipe line testing the leak by nitrogen gas pressure (minimum 400 PSI ) and vacuuming the unit properly (Minimum -30 PSI), after release the gas testing the Split type Room Air conditioner with S&F of adjustable Iron bracket.

Supply & laying Refrigerant Copper Piping minimum Thickness 0.7 -0.8 mm. Liquid pipe 6.35 mm. (1/4"), Gas pipe 15.88 mm. (5/8") with nitrile rubber insulation of 9 mm & 13 mm thickness having aluminium foil wrapping and coating over insulation. [Make Royku / Totaline/ Mandeep]

Supply and fixing of 3-Core,2.5 Sq. mm copper main cord for inter-connecting indoor and outdoor unit & power supply. (make- Finolex/ KEI/ Polycab/ Havells)

Supply and fixing of 4-Core,1.5 Sq. mm copper main cord for inter-connecting indoor and outdoor unit & power supply. (make- Finolex/ KEI/ Polycab/ Havells)

Supply & laying of 3/4 '' PVC flexible drain pipe with necessary accessories as required.

Supply R-22 gas charging the gas after changing copper strainer, capacity tubes, jointing the copper tubes by brazing after nitrogen flushing and vacuuming the unit properly.

Make and model to be approved by the EIC

Defect Liabibility Period 1 (One) year

MAA TARA ENTERPRISE (BID ID -6877099)

BENGAL TRADING CO (BID ID -6881976)

FAME ENGINEERING (BID ID -6894623)