SPECIAL REPAIR REPLACEMENT OF ALLUMINIUM WIRING INTO COPPER WIRING AT OFFRS MD ACCN BLDG NO 524 1 TO 4 525 1 TO 4 526 1 TO 4 527 1 TO 4 528 1 TO 4 AT NEW ALLENBY LINES UNDER GE N SECUNDERABAD

Amount

Taking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes complete all as specified and as directed.

Material and labour for point wiring complete with stranded copper conductor 1.5 Sqmm (nominal area) PVC insulated unsheathed cable up to 1100 V grade FRLSH conforming to IS - 694 multistranded drawn in existing conduit with new sunk type pressed steel terminal boxes suitable for MODULAR switches including fixing/grouting sunken/ surface as per site requirement covered with suitable modular white cover plate for suitable size for mounting of MODULAR switches, regulators and drawing continuous earth wire with one run of 1.5 Sqmm (nominal area) PVC insulated unsheathed cable up to 1100 V grade FRLSH conforming to IS - 694 multistranded copper conductor as earth wire and connecting to common earth dolly and making good the disturbed wall surfaces to match with the existing surfaces complete all as specified and as directed for the following :- (a) One light/ Bell point controlled by one, one way switch 5 amps, SP

All as per item No. 2, but one Ceiling Fan / exhaust fan point controlled by one, one way switch and regulator

All as per item No. 2, but one 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board .

All as per item No. 2, but one 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

All as per item No. 2, but one light point controlled by two, two way switch 5 amps, single pole

Description as per item No. 2 here in before but using 2.5 Sqmm single core FRLSH copper conductor cable of multistranded PVC insulated unsheathed 1100 Volts grade for 3 Pin 15 Amps switch socket combination point on independent board including running of 2.5 Sq mm FRLSH copper conductor PVC insulated cable as earth continuity conductor complete all as specified and as directed.

Supply and fix MODULAR switch 1 way 6 A, 1 Module capacity 230 volts complete all as specified and as directed.

Supply and fix MODULAR socket 5 pin 6 amps 2 MODULE, 230 Volts complete all as specified and directed.

Supply and fix MODULAR socket 6 pin 6/16 amps 2 MODULE, 230 Volts complete all as specified and as directed.

Supply and fix Switch MODULAR 1 WAY 16 amps, 230 Volts complete all as specified and as directed.

Supply and fix 2 MODULE regulator for compatibility with BLDC ceiling fans MODULAR 5 stepped type complete all as specified and as directed.

Supply and fix Modular bell push of 6 Amps SP, 230 volts AC complete all as specified and directed.

Supply and fix Switch MODULAR two way 6 amps, 230 volts, 1 module complete all as specified and directed.

S & F lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings fixed with wooden round blocks complete all as specified and as directed.

S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm complete all as specified and as directed.

S & F ding dong Bell AC,230 Volts, single pole complete all as specified and as directed.

Supply and fix wall mounted LED batten with extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver 1 x 20w, 230 volts, bipin holders, DIFFUSED TYPE connector block internally prewired etc with 2 Nos PVC round blocks for mounting arrangements including all accessories with new 3 core multi stranded copper conductor of size 23/0.193 from ceiling rose to fitting and including LED Tube 20W complete all as specified and as directed. Make : Havells cat No-REGALBATTENT8UPTO 1X22WSSBSWH incl Tube Rod cat No-PHOTONULTRA2.01213T8SSTL20WLED865SPC, Wipro cat No WI0921208 incl Tube Rod LL13-181-65SE, Philips Cat No - TMC501P1xT-LED22WP3241 incl tube rod 20w.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection with suitable dia GI bracket 0.60 Mtr length fixed on wall with 50x6 mm flat iron, clamps, nuts and bolts complete all as specified and as directed. Make : Havells Cat No - ENDCITYLITPLATE+SL35WLED 757SASYBOPCWOSPD, Wipro Cat No LR13-501-XXX-57-XX, Philips Cat No - BRP030 LED35 CW MR PSU GR DX.

S&F Wall mounted light fitting suitable for 1x10 Watt LED Bulb complete with all accessories incl 01x 9 Watt LED bulb complete all as specified and directed.

S & F wall mounted LED Batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver 1x10 w watts, 230 volts, DIFFUSED TYPE connector block, internally pre wired etc with necessary mounting arrangements including all accessories with new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting all as directed.

Supply and fix TPN distribution board of 4 way double door with incoming MCB TPN 415 volts AC, 3 phase, 50 Hz, 25 KA Breaking Capacity with fixed magnetic setting for current rating of capacity 63 Amps including MCB 4P conforming to IS 13947 (P-2) IEC: 947 made out of CRCA sheet housing with powder coated conforming to IS 13032, IS 8623, BS 5486 accommodated suitably in a mild steel enclosure weather proof mild steel sheet having hinged and robust locking arrangement and taking down old unserviceable DB complete all as specified and as directed.

S & F MCB TPN 240 volts suitable for fixing in MCB DB of capacity 63 amps complete all as specified and directed.

S & F sheet metal enclosure MCB DB SPN 8 way with 200 amps rated bus bar 240 volts double door with magnetic locking system complete all as specified and as directed.

S & F MCB SP 6 to 40 Amps 240 volts for fixing on MCB DB's complete all as specified and as directed.

S & F MCB SPN 40 Amps 240 volts for fixing on MCB DB's complete all as specified and as directed.

Material and labour for sub main wiring with 4 runs of single core FRLSH PVC multistranded stranded unsheathed copper conductor cable of size 10 square mm and drawing through PVC conduit of 25mm dia with accessories on concealed in wall/roof along with one run of 10 square mm FRLSH PVC insulated unsheathed multi stranded 1100 volts grade with copper conductor cable as earth continuity conductor connected to earth and earth dolly, connecting to main board including removing the existing wiring and making good the disturbed wall surfaces to match with the surroundings complete all as specified and directed. Note: 5 runs of 10 Square mm cable and 1 run of PVC conduit with accessories shall be measured as 1 unit of running meter.

Material and labour for sub main wiring with two runs of single core FRLSH PVC insulated, multistranded unsheathed copper conductor cable of size 4 square mm and drawing through PVC conduit of 20mm dia with accessories on concealed in wall/roof along with one run of 4 square mm FRLSH PVC insulated unsheathed multi stranded 1100 volts grade with copper conductor cable as earth continuity conductor connected to earth and earth dolly, connecting to main board duly making good the disturbed wall surfaces to match with the surroundings complete all as specified and directed. Note: 3 runs of 4 Square mm cable and 1 run of PVC conduit with accessories shall be measured as 1 unit of running metre.

S & F Environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head edge-lit LED luminaire comprising of high brightness LEDs complete all as specified and as directed.

Material and labour for earthing with galvanized mild steel earth plate electrode 60 centimetre x 60 centimetre x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 metres below ground level, the top edge of the earth plate at a depth of not less than 1.5 metres below ground level connected to galvanized iron earth wire of 4 mm dia by means of bolts, nuts and washers made out of GI / steel earth wire protected by GI light grade pipe 15 mm bore, 20mm dia light grade galvanised iron pipe with funnel wire mesh for watering and connecting to main switch board / control board all s shown in electrical plate of SSR Pt - I connected to earthing test point and including testing on completion complete all as specified and as directed. NOTE: The unit rate shall also include for excavation, earth work in hard/dense soil, plain cement concrete 1:3:6 type C1 by using 20 mm graded aggregate in pit, 50 mm thick reinforced cement concrete 1:2:4 type B1 using 20 mm graded aggregate cover duly reinforced with 8 mm dia TMT bars @ 100mm centre to centre both ways, galvanised iron funnel with watering pipe, wire mesh, complete.

S&F Sheet steel MS enclosure earth plug socket 2 pin 20 amps with metal 20 amps with MCB 20 amps complete, all as specified and as directed.

Supply and fixing ceiling fans 1200mm, aluminium body, power consumption not more than 28W, BEE 5 star rated with BLDC motor, service value greater than 8.40 CMM/W, air deliver minimum 220 CMM, 350 RPM compatible with step regulator for speed control along with down rod, Canopy-2 Nos, electronic 5 step type regulator complete all as specified and directed. Make - Bajaj/Havells/Atomberg Note :- The following documents to be produced while approval :- (i) NABL test report (ii) BEE certificate (iii) BIS certificate (iv) Warranty certificate for 5 years.

M & L for cutting chases, pining to making good to facing where ever required and pointing in cement motor 1:3 to ends or edges of endings, steps, cills etc and cutting chases for concealed wiring making good and cutting not exceeding10 cm girth complete all as specified and as directed.

Taking down existing old vintage ceiling fans and depositing to MES store yard complete all as specified and as directed.

Taking down existing exhaust fans and refixing the same after serving in same position complete all as specified and as directed.

Material and labour for INVERTOR wiring with stranded copper conductor 1.00 Sqmm (nominal area) PVC insulated unsheathed cable up to 1100 V grade FRLSH conforming to IS - 694 multistranded drawn along with existing point wiring complete all as specified and as directed.

gsrinivasarao

DWARKA PERSHAD RADHEY RAMANLAL

Srinivasa Consructions

K LAKSHMAN SINGH AND CO

PAVAN ENTERPRISES

Universal refrigeration and Engineering Company

MUDDAM CONSTRUCTIONS