Resurfacing and repairing of existing tennis court

Amount

Removing of Undulations from existing tennis court and making the level with the help of resurfacer complete as per drawings, specifications and as directed by the Engineer-in-charge

Providing & Fixing of Acrylic synthetic cushion court 8 layers job work with crystal cloth by following procedure. Step 1: Opening out visible hairline cracks and surface preparation of wall can be done by cleaning with water and wire brush. Then filling crack with crack filler. step 2: Further applying one base coat of primer coat of UNIQPRIMER. Step 3: Fixing of crystal cloth with PRIBOND SBR (latex polymer). & one coat of UNIQSEALER (resurfacer). Step 4: This is further followed by three layer of CUSHION REDIMIX and one seal coat of UNIQSEALER. Step 5: After curing applying two coats of UNIQCOAT colour (pre-coat with silica sand and top-coat without silica sand). Step 6: Applying one final layer of game marking and complete as per drawings, specifications and as directed by the Engineer-in-charge

Providing and painting with Epoxy PU paint using 3 coats of (180 Micron dry film thickness) Epoxy PU high building coating of approved make as finishing coat over a priming coat of EPILUX-4 clear lacquer primer over concrete/ plastered surfaces at all locations prepared and applied as per manufacturer' specifications including preparation of surface by cleaning with wire brush and rubbing, scraping , applying sand paper , making free of dust, dirt etc. filling the holes, joint, cracks if any using epoxy putty complete. all as per manufacturers technical data and as directed at site to achieve minimum overall dry Film thickness of 180 micron (180 micron finishing coat) On CONCRETE surfaces

IDEAL CONSTRUCTION CO. (BID ID -3213878)

M/s RAJU NARAYAN (BID ID -3213528)