Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.8 LAccepted-AOC | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹35.7 L+₹34,277 (0.97%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹36.0 L+₹58,402.59 (1.65%)Rejected-Finance 58 SHAHEED NAGAR OPP BHIMRAO AMBEDEKAR UNIVERSITY RBL ROAD LUCKNOW 226025 UP | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226025 | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹36.0 L+₹63,891 (1.80%)Rejected-Finance 73 ASHOTOSH NAGAR NEAR KUNDAN GENERAL STORE OPP SARAD TIMBER P O MANAS NAGAR KRISHNA NAGAR LUCKNOW 226023 | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226023 | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹36.6 L+₹1.2 L (3.33%)Rejected-Finance | L5 | Rejected-Finance Other than lowest |
Tender Value
₹45.1 L
EMD Value
₹90,300
Closing Date
4 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE West Lucknow
GE West Lucknow, 11 Sardar Patel Marg, Lucknow Cantt-226002
SPL REPAIR TO BLDG NO T39 AT CCPU AND PROVN OF BATHROOM AND TOILET FOR 07 NOS WC AND 05 NOS BATHROOM AT RSD LUCKNOW UNDER GE (WEST) LUCKNOW
2022_MES_546924_2
GE/W/LKO/52 OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
Lucknow
As per NIT and Tender documents
9 documents required · 9 mandatory
₹500
GE West Lucknow
₹90,300
Yes
20 Oct 2022
12 Sept 2022
6 Oct 2022
12 Sept 2022
4 Oct 2022
20 Sept 2022
12 Sept 2022 - 19 Sept 2022
60 days
Amount
Dismantling asbestos cement (corrugated, semi corrugated etc) sheets & ridge in roof coverings complete all as specified and directed.
Dismantling timber scantling from unframed work 40 sqcm and over in section in any position complete all as specified and directed.
M & L for brick work with fly ash bricks (old size) straight or curved on plan exc 6m mean radius in CM 1:4 including demolition of brick work or stone/ boulder masonry, built in cement mortar complete all as specified and directed.
M&L for fly ash brick (old size) straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and directed.
M&L, 15mm thick rendering in CM (1:4) on fair faces of brick/concrete surfaces, finished even and fair complete with preparation of new plastered surfaces of wall over one coat of primer and applying two coat of cement base paint complete all specified and directed . (Note :- WPC measured and paid separately @ 2% of weight of cement)
M&L, 15mm thick rendering in CM (1:4) on fair faces of brick/concrete surfaces, finished even and fair complete with preparation of new decorated surfaces of wall one coat of primer and applying two coat of cement base paint including taking down cement plaster complete all specified and directed. Note :- WPC measured and paid separately @ 2% of weight of cement)
Supply only integral water proofing compound conforming to IS 2645-2003 complete all as specified and directed
M & L for 15mm thick rendering in CM (1:4) on fair faces of brick/concrete surfaces, finished even and smooth complete with preparation of new plastered surfaces of wall applying two coat of oil bound distemper over a coat of wall care putty not less than 1 mm thick and a coat of primer complete all specified and directed.
M & L for 15mm thick rendering in CM (1:4) on fair faces of brick/concrete surfaces, finished even and smooth complete with preparation of new decorated surfaces of wall applying two coat of oil bound distemper and applying one coat of birla/JK wall care putty not less than 1 mm thick including taking down cement plaster complete all specified and directed.
M & L for 10mm thick rendering in CM (1:4) on ceiling, finished even and fair complete with preparation of new decorated surfaces of ceiling applying three coat of white wash on ceiling including taking down cement plaster complete all as specified and directed.
S&F in repair Gypsum Board 12mm thick , white pre-laminated sett embossed reinforced designer ceiling boards of approved texture at all height laid on hot dipped GI imposed grid with 24mm wide T sec exposed flanges which shall be pestered coated white. The frame work shall comprise of main runner made from 0.33 mm thick GI sheet of size 24x32x300mm and spaced at 1200 mm C/C securely fixed to the structural soffits by approved hangers at 1200mm c/c. Hangers of GI wire 4mm dia to be fixed by approved rawl plug, screw etc. The last hanger at the end if each main runner shall not be greater than 450mm from adjacent wall, flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runner at 600mm C/C to form 1200x 600 mm modules cross tee longer than 600mm to be supported independently 1200x600 dodules formed by fitting 600mm long cross tee centrally between the 1200mm cross tee. Tee perimeter wall angle shall be made of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacturers instructions complete all as specified and directed.
S & F in Plaster of Paris cornice size 100x100mm design and pattern approved by engineer in charge including necessary required fitting complete all as specified and directed.
M & L for Mild steel work as in tubular/Angle purlins, rafters and similar items complete including cutting, grinding, welding etc Fe 290 (Gde E-165) as required complete all as specified and directed
M & L for two coats of synthetic enamelled paint over a coat of red oxide primer including preparation of new steel/iron surfaces exceeding 10cm width or girth complete all as specified and directed
S & F 0.50 mm thick pre-painted galvalume aluminium zinc coating galvanised iron based corrugated steel sheet with side lap and end lap of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self-tapping screws complete all as specified and directed.
S & F 0.50 mm thick Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet / Ridge any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws complete all as specified and directed.
M & L for Non skid ceramic coloured tiles in floor of any shade as approved , size ( 300 x 300mm) x 7 to 8mm thick over and including 15mm thick screed bed or beding layer in cement mortar (1:4) in floor etc set and jointed in neat cement slurry and pointed with white or coloured cement to match including dismantling of floor hearth or wall tiling including cement mortar bedding but not backing complete all as specified and directed.
M & L for Glazed ceramic coloured tiles in vertical surface 300x 600X 7-8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match tiles over and including 10 mm thick backing coat in CM 1:4 including dismantling of floor hearth or wall tiling including cement mortar bedding but not backing complete all as specified and directed.
M & L for coloured vitrified ceramic tile, light shade flooring of size of tile 600x600x8-10mm thick as in floor, set and jointed in neat cement slurry and pointed in coloured cement to match the surface over and including screed bed or bedding layer 15mm thick in cement mortar 1:4 including dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and removing tiles complete all as specified and directed.
M & L for coloured vitrified ceramic tile, light shade of size 600x600x8-10mm thick as in skirting set and jointed in neat cement slurry and pointed in coloured cement to match the surface over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed.
Demolition of Cement concrete (unreinforced) in ground floor and paving not exc 15cm thickness below or above ground level complete all as specified directed
M & L for 25mm thick PCC 1:2:4 type B0 (using 12.50mm graded stone aggregate) as in levelling course etc. complete all as specified and directed.
M & L for Machine cut kota stone slab flooring 20-25mm thick over 20mm thick cement screed base in cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
M & L for Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 10mm thick cement screed base in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
Taking down chowkhat frame with shutter (without taking out shutter from the frame) not exc 1.50 Sqm and removing from sites complete all as specified and directed.
Taking down chowkhat frame with shutter (without taking out shutter from the frame) exc 1.50 Sqm but not exc 4 sqm each and removing from site complete all as specified and directed.
Supply and Fixing Factory made steel windows / ventilators double shutter with grill frame with 'Z' section side hung glazed shutter fixed (with sash bar) on external side and with wire gauge shutter (without sash bar) on internal side and including steel handle 100mm long of MS flat 20x5mm made to shape 02 Nos of MS tower bolts 100 mm on each shutter and fixing hooks & eye of standard quality including necessary fitting complete all as specified and directed.
Supply and fixing second class hard wood (sal) plain, solid, straight chowkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.
M & L for preparing surfaces of wood and wood based materials, any description and girth, not otherwise described, and treated with tar or coal tar black paint complete all as specified and directed.
S & F mild steel work as in hold fast of flat iron 50x3 mm and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.
Cutting holes in brick work built in cement mortar for inserting hold fast and making good dismantled portion in CM 1:3 depth of cutting from the face of jamb/wall exc half brick but not exc one brick complete all as specified and directed.
S & F Factory made solid PVC door frame of size 50 x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed
M & L Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS Frame shall be covered with heat moulded plain colour PVC C Channel having a PVC sheet strip of 20mm width stuck inside with solven cement for stiles and plain colour PVC sheets for top rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted ihn th MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solven cement, Supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed
Supply and fixing 30mm thick Second class hard wood (sal) glazed & Skelton shutters ,open rebated, prepared to receive glass, gauze etc, without shash bar edge of framing plain, chamfered or rounded, fitted with cut or mitred beads for securing glass, gauge etc sizes of members of shutters as specified in SSR Part-I section 8 clause 8.24(a) supplied and fitted to chowkhats complete all as specified and directed
Supply and fixing for 30mm thick factory made flush shutter solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S & F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
Material and Labour for 4 mm thick plain sheet glass ordinary quality including glazing with putty area not exc 0.5 sqm in each pane complete all as specified and directed.
S & F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed
S & F stainless steel Butt hinges "medium weight" steel 100mm size complete all as specified and directed.
S & F aluminium handle fabricated type anodised 150mm long complete all as specified and directed.
S & F aluminium alloy anodized sliding door bolt 250mm long with hasp and staple (bolt type) and fixing clip of sheet and cast in extruded section and fixing bolts and sliding bolt of extruded section complete all as specified and directed..
Material and Labour for preparation of new surface of wood or wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S & F in Anodised aluminium powder coating (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.
S & F in Anodised aluminium powder coating (minimum thickness of powder coating 50 micron door) shutters, aluminium section weighing 0.55 kg / m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and directed.
S & F in Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P.brass/ stainless steel screws complete all as specified and directed.
S & F in 5.5 mm thick Sheet glass, ordinary quality and glazing with oil putty / glazing clips, rubber neoprene packing, in square not exc 0.5 sq. m in each pane complete all as specified and directed.
S & F in 5.5 mm thick Sheet glass, ordinary quality and glazing with oil putty / glazing clips, rubber neoprene packing, in square but exc 0.5 sq. m in each complete all as specified and directed.
M & L of anti- termite treatment for external/internal wall below concrete or masonry using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc complete all as specified and directed.
M & L for Cutting chases, pinning in brick , Stone concrete or slab walls etc making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.
Taking down old GI tubing 15mm dia medium grade galvanised with all fittings fixed to wall and in floor complete all as specified and directed.
Taking down old 20mm dia medium grade galvanised with all fittings fixed to wall and in floor complete all as specified and directed.
S & F in repair PVC (SWR) Pipes 75 mm bore single socketed in any length with rubber ring joints , fixed on walls complete all as specified and directed.
S & F in repair PVC (SWR) Pipes 110 mm bore single socketed in any length with rubber ring joints , fixed on walls complete all as specified and directed.
S & F in repair PVC (SWR) bends any radius 75 mm size complete all as specified and directed.
S & F in repair PVC (SWR) bends any radius 110mm size complete all as specified and directed.
S & F in repair 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.
S&F in repair vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified and directed.
Supply & fixed vitreous china wash down water closet ( pedestal pattern) 'P' or 'S' trap including plastic water closet seat, closed pattern with flat bottom and cover and mild steel CP or aluminium hinging device complete all as specified and directed.
S&F in repair vitreous China squatting pan Orissa pattern size 580x440mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap set and to flush pipes etc and lime concrete bedding complete all as specified and directed.
S&F vitreous China squatting pan, ' Orissa pattern, size 580 x 440 mm white, with integral footrests and PVC (SWR) S or P traps (excluding flushing cistern and flush pipe) complete all as specified and directed.
S&F in PVC valve less symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle complete all as specified and directed.
S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, seat cover , (excluding flush pipe) and 'P' or 'S' trap, including connection to trap and flushing pipe, antisyphonage pipe etc including provision of PCC (1:5:10) type E2 in filling, making good to floor, complete all as specified and directed
S & F 15mm bore PVC connection 450mm long with PTMT nuts and washer complete all as specified and directed.
S & F in repair for CP bib taps quarter turn 15mm fancy type Chromium Plated cast copper alloy with crutch or butterfly handle complete all as specified and directed. Make : Essco Jaquar cat No - TQT512 / Player cat No- PAS 106 / Prayag cat No - 6608
S & F in repairs 15mm bore, fancy type chromium plated shower rose 125mm dia with shower arm complete all as specified and directed. Make : Essco Jaquar cat No - EOS-542A / Player cat No- AS1016 / Prayag cat No - BS-67
S & F in repair Angle valve quarter turn cast copper alloy with capstan head chromium plated screwed down high pressure with long shanks and fly nuts screwed for 15mm bore pipe complete all as specified and directed Make : Essco Jaquar cat No - TQT526 / Player cat No- PAS109 / Prayag cat No - 6610
S & F in repairs Two way cock/Two way Angle cock quarter turn with wall flange matt chrome finish complete all as specified and directed. Make : Essco Jaquar cat No - TQT-512A / Player cat No- PAS108 1007/ Prayag cat No - 6612
S & F in repair single lever brass CP wall mixer 3-in-1 system with provision for overhead shower with 115 mm long bend pipe, connecting legs and wall flange (without overhead shower) shower for iron pipe of 15 mm bore GI pipe complete all as specified and directed. Make : Essco Jaquar cat No - TQT-519 / Player cat No- PAS 120/ Prayag cat No - 6680
S & F in repairs CP brass center hole mixer quarter turn for wash basin for mixing hot and cold water screwed down for iron pipe and fixed for 15 mm bore pipe size complete all as specified and directed. Make : Essco Jaquar cat No - TQT-519 / Player cat No- PAS 121/ Prayag cat No - 6750
S & F in repair Soap dish CP any size complete all as specified and directed.
S & F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 550 mm long complete all as specified and directed.
S & F in repair glass corner shelves fancy type 6mm thick 250x250mm size and fixed over CP brass brackets complete all as specified and directed.
S & F in repairs Tubular Towel Rail 20mm dia. 'D' type, 600mm long of CP fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.
S & F in repairs C P Towel ring fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.
S & F in repair fancy type CP mild steel curtain rod of 25mm dia including CP bracket/wall to wall including latto on each end complete all as specified and directed.
S & F in repair two(double) legged floor door stopper of aluminium body & tongues anodes with hard drawer steel spring fixed in floor of 140mm complete all as specified and directed
S & F Gun-metal, globe or gate valves 20mm with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
S & F in repair PVC Grating doom 125 mm dia with waste hole complete all as specified and directed.
S & F in repair PVC Grating doom 100 mm dia with waste hole complete all as specified and directed.
S and F in repair Hard/Rigid PVC waste Pipe with socket, 32 mm bore for WHB complete all as specified and directed
M & L for PCC 1:2:4, type B0 as in padding or levelling coarse for filling undulations or depression on roof and for platform for mounting service tanks, complete all as specified and directed.
Dismantling water tanks of capacity exc 500 & n exc 1000 ltr complete all as specified and directed.
S&F in position rotational moulded polyethylene water storage tanks (triple layered construction) 1000 lts capacity including 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part I including dismantling of existing tank complete all as specified and directed.
M & L for 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base etc including demolition of cement concrete in sub base ground floor complete all as specified directed.
M & L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size / shape, made by table vibratory method using rubber mould, laid in required colour & pattern over and including 25 mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand including PCC 1:2:4 type B-0 using gap filing as required complete all as specified and directed including Dismantling of cement concrete paver block (Stone slabs and tiles of any) ground floor complete all as specified directed.
M & L for filleting exc 25 but not exc 50 sq cm in any position and to any shape in cement mortar 1:4 including necessary excavation and earth work, all mitres, stops etc. complete all as specified and directed.
Surface excavation not exc 30 cm deep and avg 15 cm deep and getting out soft and loose soil complete all as specified and directed.
Excavation in trenches, not exc. 1.5 m wide and not exc 1.5 m in depth ,for foundation, laying of pipes, cables etc. or for shafts , wells, cesspits, manholes, pier holes, etc. not exc. 10 Sqm on plan and not exc. 1.5 m in depth and getting out in hard/dense soil as specified and directed.
M&L for hard core of gauge not exc 63 mm, deposited, spread and levelled in layers not exc 15 cm thick watered and rammed to a true surface of broken stone complete all as specified and directed.
M&L for Earth filling in floors or pavings, laid in layers not exc.15cm thick, spread, levelled and rammed including watering complete all as specified and directed.
M&L plain cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregates) as in sub base of floors including finishing the surfaces even and rough to receive the topping layer complete all as specified and directed.
M&L for fly ash brick straight or curved on plan to any radius, in half brick walls built in Cement mortar 1:4 complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.
Removing excavated surplus material (Soils) not exc. 50 m and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and directed.
M & L for RCC M-25 design mix (using 20 mm graded stone agg) in foundation, bases for column etc, complete all as specified and directed.
M & L for RCC M-25 design mix (using 20 mm graded stone agg) in columns, piers, posts, struts, complete all as specified and directed.
M & L for RCC M-25 design mix (using 20 mm graded stone agg) in beam cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and directed.
M & L for RCC M-25 design mix (using 20 mm graded stone agg) in slab balconies, canopies, deck slabs etc complete all as specified and directed.
M & L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter complete all as specified and directed.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; (Horizontal or sloping) Rough finished surfaces of concrete flat complete all as specified and directed.
M & L for formwork to sides and soffits of floor or roof beam, beam hauchings, girders, bressum-mers, lintels cantilever, shelves including supports, overhangs, etc also splays between floors and beams etc. complete all as specified and directed.
S&F in Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.
All as per item No 104 but 6 to 8 mm dia complete all as specified and directed.
M&L for rendering 15 mm thick in cement and sand mortar 1:6 on brick or concrete surfaces including finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15 mm thick in cement and sand mortar 1:4 mixed with water proofing compound @ 3% by weight of cement on brick or concrete surfaces including finished surfaces even and smooth without using extra cement complete all as specified and directed.
Rendering 5mm thick in cement and sand mortar (1:3) on concrete surfaces (ceiling) finished even and smooth without using extra cement, complete all as specified & directed.
M&L Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm in floors laid over 15mm thick 1:6 cement mortar screed bed etc. set and jointed in neat cement slurry and pointed in white of coloured cement to match complete all as specified and directed.
M&L for glazed ceramic colour tiles of size ( 350 x450mm ) x 7mm thick in walls etc, set & joints in neat cement slurry and pointed in white or colours cement to match the colour of tiles as in skirting/dados over 10mm thick rendering in cm 1:4 complete all as specified and directed.
M&L for 75 mm thick PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in plinth protection surface finished fair and even without using etra cement complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3), complete all as specified and directed.
Material & labour preparation of newly plastered surfaces of wall & applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.
Preparation of new plastered surfaces and applying three coats of white wash on wall surfaces complete all as specified and directed.
Preparation of new plastered surfaces and applying three coats of white wash on ceiling surfaces complete all as specified and directed.
M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified..
M&L for galvanized steel water tubing medium grade of 20mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified.
S&F 15mm bore pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down, fancy type high pressure, with or without lettered 'HOT or COLD' with long screwed sunk and fly nuts as specified and directed.
S&F vitreous China wash basin white, flat back, size 580X450 mm including cutting for pinning in ends of brackets and including waste pipe 32 mm dia and Waste coupling of PTMT any colour half of full threaded suitable for 32 mm dize discharge pipe complete all as specified and directed.
S&F Stop valves 15mm dia CP fancy type, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
M&L for concrete bed to drain pipes 150 mm dia including packing under, and haunching against the sides of pipes after they are laid and tested; in Cement concrete 1:3:6 type C-2, complete all as specified and directed.
Material and labour for reinforced concrete pipes 150mm , class NP2 laid and jointed complete wirh collar complete all as specified and directed.
S&F Tubular towel rail, 20mm dia, D type, brass chromium plated, 60 cm long between flanges complete all as specified and directed.
S&F hand shower (health faucet), superior quality, round shape, single flow, brass chromium plated, with 1m long flexible pipe with wall hook bracket etc. and all fittings for EWC complete all as specified and directed.
S & F Vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe) including urinal spreader of PTMT any colour for fixing with 15mm dia pipe. (Minimum weight 60gms) and including waste pipe 32 mm dia and Waste coupling of PTMT any colour half of full threaded suitable for 32 mm dize discharge pipe complete all as specified and directed.
S&F PVC (SWR) 75 mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
S&F PVC (SWR) 110mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
S & F 75 mm bore PVC(SWR) bends any radius complete all as specified and directed.
S & F 110mm bore PVC(SWR) bends any radius complete all as specified and directed.
S & F 75 mm bore PVC(SWR) junction single (Single T) equal complete all as specified and directed.
S & F 110mm bore PVC(SWR) junction single (Single T) equal complete all as specified and directed.
M&L for PVC (SWR) floor trap 75mm dia, plain with grating including jointing with solvent cement etc complete all as specified and directed.
M&L mild steel framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
S&F powder coating anodized aluminium glazed window and ventilator shutters, side hung/ top hung type without sash bars, with aluminium sections weighing not less than 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as 01 no. 150mm long peg stays, 02 nos. 100mm long hinges type B-21, 01 no. 150mm long tower bolts and 01 no. 125mm long handles complete all as specified and directed.
S&F 3mm thick figured glass, pin headed type and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified and directed.
S&F 150mm MS ordinary rat tail pattern spring including roller & roller plate complete all as specified and directed.
M & L for cleaning of all loose dirt and dust from roof surfaces and applying roof treatment as under :- (a) 10 mm thick plastering in CM (1:3) using 100 % coarse sand on roof / parapet walls with WPC @ 3 % by weight of cement. (b) Applying a coat of bituminous primer confirming to IS-3384-1986 @ 0.40 ltrs/Sqm on prepared surfaces and allow to dry as specified and directed. (c) Supply and laying of 3mm thick (Minimum) polymeric water proofing membrane weighing not less than 3 Kgs/Sqm as specified and directed. (d) Supply and laying 40 mm thick brick tiles best quality well kiln burnt over and including 15 mm thick screed bed in CM(1:4) and jointing and pointing in CM (1:3) by mixing polymer base liquid water proofing chemical as per manufacturer instructions complete all as specified and directed. Note : The net area of water proofing treatment shall be measured without any extra allowance for laps & portion inserted in groove which shall be deemed included in the quoted rates
S&F Chequered cement concrete tiles 30cm x 30cm x 25 mm thick set, jointed and pointed in neat cement slurry in floors over and including 20 mm thick screed bed bedding layer in CM 1:6 complete all as specified and directed.
Taking down copper/ aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc. to match the existing complete all as specified and directed. NOTE: Credit for this items shall be made as per conditions separately.
M&L for point wiring complete for one light point or one fan point controlled by one, one way 5/6 Amp switch with PVC (FRLS) insulated unsheathed multi stranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including 20mm dia 'medium grade' PVC concealed conduits ISI marked and fittings, including pressed steel concealed terminal switch boxes not less than 1.6mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated Bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC(FRLS) insulated unsheathed multi stranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed.
All as per Item No 140 above but for one 5 pin 5/6 Amp socket outlet point on an independent board, complete all as specified and directed.
All as per Item No 140 above but for one 5 pin 5/6 Amp socket outlet point on the same board with other switch, complete all as specified and directed.
All as per Item No 140 above but for One bell/ buzzer point controlled by one bell push, complete all as specified and directed.
All as per Item No 140 above but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 2.50sqmm and green colour earth cable of size 2.50sqmm, complete all as specified and directed..
S & F switch piano flush button single pole one way 5/6 Amp 240 volt complete all as specified and directed.
S & F switch piano flush button single pole one way 15/16 Amp 240 volt complete all as specified and directed.
S&F socket outlet flush type multipurpose 2 in1, 3 pin 5/6 and 15/16 Amp, 230 volts complete all as specified and directed.
S&F socket outlet flush type 5 pin 5/6 Amp, 230 volts complete all as specified and directed.
S&F ceiling rose surface Bakelite three terminal complete all as specified and directed.
S&F bell push single pole one way 5/6 Amp, 240 volt flush type complete all as specified and directed.
S&F call bell AC single pole 240 volt ding dong type complete all as specified and directed.
S&F angle type holder insulated body with back plate suitable for batten fittings complete all as specified and directed.
S&F fan regulator electronic, step up socket type,230 volt,125 W and connection complete all as specified and directed.
Supply and Fixing wall/surface mounting luminaires integrated LED Batten 20 W, 6000 K,100 lumens/watt , 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements complete all as specified and directed. Make Phillips Smart brite cat no BN 021 LED 22S 6500 PSU GR/SI or/Havells LUMILINE+BS20WLED865SPCSS/ Bajaj LED batten BCLAB 20W WH LED P
Supply and fixing wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 10/12 W, 6500 K, 230V ,100 lumens/watt, with extruded aluminium housing & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements complete all as specified and directed. Phillips smart brite BN 021 LED 12S 6500/4000 PSU GR/SI /Havells LUMILINE+BS10WLED865SPCSS/Orient Taskline AI LBLN-12-C-AL
Supply & fixing bulk head light fitting made from cast aluminium body with heat resistance pressure die cast housing, IP-65 protection cover suitable for bulk head fitting integrated type 6.5 W LED, 6000K , 105 lumens/watt including inbuilt electronic driver complete all as specified and as directed. Make: Philips Vista glow ordering code : WT140W LED7S NW PSU S1 PC./ Bajaj wee plus cat no BIBWP 6W LED/Havells RUGBYGENXFTS10WLED865SSYMBOPC
S&F in repair LED Building security light 24/25 Watt with high power LED source (>110lumen/watt) PDC housing, IP65 and IK 07 with 4 KV inbuilt surge protection potted driver including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories ,complete all as specified and directed. Make Philips Green line smart cat no BRP042 LED 25 CW R1 S1 PSU GR/ Bajaj Edge nxt cat part No ENXT P 24L WH CR PC SD/Havells Endura Sundown with cat part No ENDURASUNDOWNSL25WLED765PASYBOPCIHD
S&F in repair super bright LED (2X2), 36 W, 6000 K recess mounting with high efficient LED source complete all as specified and directed. Make ECOLINK cat part no.: RC340B LED36S -6500 L60W60 PSU OD ELP/Havells Cat No VENUS NEO 2X 2 36WLED 857/ Bajaj SKYLUX GZI SERIES-RECESSED cat No BZRSQL 36W GZi WH
S&F 30 W flood light LED fitting Warm/day cool as required, IP 65 protection with high power LED complete with including provn of flexible three core cable from ceiling rose to fitting terminal for making electrical connection, fixing the fitting on wall including all necessary fixing accessories with nuts and bolt complete all as specified and as directed . Make: HAVELLS cat Part No. JETAQUANTOFLS30WLED765SYMPCGRY/ Phillips Essential Smart bright Flood BVP161 LED30 CW PC WB/Bajaj Amaze LE BJFL 30W LED
M&L sub main wiring with two single core PVC insulated FRLS cable 4.0 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 4.0 sqmm stranded copper conductor earth continuity FRLS cable drawn through non metallic rigid PVC conduit 25mm dia including all conduit and fixing accessories concealed in wall including cutting chases in wall and making good disturbed surface to match of walls /ceiling complete including taking down old sub main wiring, complete all as specified and directed. (Note-The cost of PVC pipe and accessories shall be deemed to be included in the quoted rate)
M&L for two single core PVC insulated FRLS cable 6.0 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 6.0 sqmm stranded copper conductor earth continuity FRLS cable drawn through non metallic rigid PVC conduit 25mm dia including all conduit and fixing accessories concealed in wall including cutting chases in wall and making good disturbed surface to match of walls /ceiling complete including taking down old sub main wiring, complete all as specified and directed. (Note-The cost of PVC pipe and accessories shall be deemed to be included in the quoted rate)
S&F 7/9 watt LED Lamp any type as required complete all as specified and as directed
S&F in repairs double door VTPN 4 way double door suitable for 4 pole MCCB , 415 V as incoming & SP/TP MCB as outgoing 200 Amps rated Busbar, inter connection link, cable ties, earth bar etc incl necessary civil works and electrical connections with suitable lugs/spreader links complete all as specified and directed . ( Note: MCCB & MCB to be measured and paid separately)
S&F MCCB 63/100 Amps 415 volts, 4 pole 16 KA breaking capacity complete all as specified and directed.
S &F sheet metal enclosure for MCB DB double door type, single pole and neutral 12 way, 240Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.
S&F sheet metal enclosure for MCB DB double door type, single pole and neutral 4 way 240 Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.
S&F sheet metal enclosure for MCB DB double door type, single pole and neutral 8 way 240 Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blanking plates for unused way complete all as specified and directed.
S&F MCB, single pole 6 to 32 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.
S&F MCB, single pole & neutral 32/40 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.
Supply and fixing modular type AC box with socket plug top and MCBs with two pin and one pin for earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed.
Taking down ceiling fans, dismantling blades and removing fan and blades to store & painting of ceiling fans complete in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc and hanging only to another location of ceiling fan and connection up including provision of cable from ceiling rose or connector to fan complete all as specified and directed. Note: Old ceiling fan deposited to AGE E/M yard
Taking down Exhaust fans, dismantling blades and removing fan and blades to store & painting of ceiling fans complete in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc and hanging only to another location of ceiling fan and connection up including provision of cable from ceiling rose or connector to fan complete all as specified and directed. Note: Old ceiling fan deposited to AGE E/M yard
S&F ceiling fan 1200mm sweep, BEE star rated (40-48 W), Min air delivery 215 CFM, copper wound, AC single phase, 230/240 volts white colour complete with fan motor, blade, down rod, canopy and provn of connection with three core flexible copper wire cable of size 1.50sqmm from ceiling rose to fan complete all as specified and directed. Make: Havells ES 40/Bajaj Edge HS (Opal white)/Anchor Power
S & F in replacement of exhaust fan single phase, 230/240 Volt heavy duty metallic body of size 300 mm sweep 1400 RPM with suitable louvers and making connection with twisted copper flexible wire 23/0.076mm complete all as specified and directed. Make:- Usha (Turbo heavy duty metal body)/Havell's (Turbo force HP)/Orient (Heavy duty) NOTE:- Old exhaust fan shall be deposited in AGE E/M yard
S & F in replacement of exhaust fan made of sturdy engineering plastic body complete with louvers shutter, single phase, 230/240 Volt of size 250 mm sweep 1200 RPM and making connection with PVC insulated and sheathed three core copper flexible cable 23/0.076mm after cutting opening in 230/460mm thick brick wall built in cement mortar and making good the surface with cement mortar 1 :3 including necessary frame etc all as specified and directed by Engr-in-charge. Make Havells /Anchor/Bajaj
Supply & Laying or passing through pipe, 1100 volt grade heavy duty cable with XLPE insulated Aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and over all PVC sheathed of 16 Sq mm 4 core stranded conductor nominal cross section complete all as specified and directed.
Supply & Laying or passing through pipe, 1100 volt grade heavy duty cable with XLPE insulated Aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and over all PVC sheathed of 10 Sq mm 2 core stranded conductor nominal cross section complete all as specifed and directed.
M&L for well burnt sub class 'B' bricks laid flat breadth wise along the length of cable protection complete all as specified and directed.
M & L for sand cushioning to underground cable 8cm deep before laying and 15cm deep after laying cable complete all as specified and directed
Cutting of existing for laying of underground cable and making good to disturbed surface as per existing specification not exceeding 0.9 mtr in depth complete all as specified and directed.
M & L for galvanised steel tubing 50mm bore light grade laid in trenches, road crossings pole/wall etc. for cable protection including providing MS flat iron 50mm x 6mm clamps (02 Nos) including taking down the existing UNSV steel tubing complete all as specified and directed.
M & L for galvanised steel tubing 40mm bore light grade laid in trenches, road crossings pole/wall etc. for cable protection complete all as specified and directed.
S & F water heater storage type electric BEE star rated of capacity 25 ltrs, 8 Mpa working pressure, 1.5mm thick steel tank to operate on 230 volt AC, 2000 watt vertical type including 2/4 Nos full threaded fastener of size 100x10 mm with, 2 No washer, water connection with 02 Nos heavy duty PVC flexible pipe of size 15 mm, 450 mm length & suitable plug top of 16 Amp capacity complete all as specified and directed. Make:- Bajaj Montage/ Havells (Adonia series)/Jaquar & Co Pvt Ltd. NOTE:- Product must have 2 years warranty on heating element & 5 years warranty on inner tank.
M&L Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, burried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m deep below normal ground level, connected to galvanised earth lead wire 4.0mm dia ( upto 7.50m) by means of bolts, nuts, check nuts & washers of galvanised iron or steel, earth lead wire protected by 15mm dia GI pipe light grade, 20mm dia light grade GI pipe for watering, meshed funnel, alternate layer of charcoal and common salt complete all as SSR Item No. 19471 and shown in electrical plate No. 3 of SSR part-I with PCC chamber, 50mm thick RCC cover in 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 8mm dia TMT bar @ 80mm c/c both way in lieu of CI pit cover and protection including necessary excavation and earth work complete all as specified and directed.
M R CONSTRUCTION
M/S S S A ASSOCIATES
suniltraders
ANIL CONSTRUCTION
M/S Vindhya Infraventures
M/s SNS Construction
M/s Bipin Construction
rajan construction
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .