REPAIR / MAINT TO FLOORING, TILING, JOINERY, PLUMBING, SANITARY FITING, CGI SHEET, PVC WATER TANKS, ROOFING, CEILING, PANELLING AND PERIODICAL SERVICES AT BIRPUR AND DUKHAMPANI OF AGE B/R II UNDER GE 859 EWS

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing).

M&L for 15 mm thick screed bed in CM 1:6 finished rough for laying floor tiles.

M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding .11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade.

M&L for 7 to 8mm thick( area of each tile exc. 0.11 sqm but not exc. 0.18 sqm) non skid colour ceramic tiles in floor etc. set and jointed in neat cement slurry and pointed in white cement to match the shade.

M&L for non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade.

M & L for 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces finished rough to receive tiles .

M & L for 300 x 200 x7 mm thick glazed coloured ceramic tiles on vertical surface of wall set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade.

M & L for 350 x 250 x7 mm / 450 x 350 x 7 mm thick glazed coloured ceramic tiles on vertical surface of wall set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade.

M&L for 18- 20 mm thick granite (of any type) work (table rubbed and polished) in cooking platforms in CM 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite all as specified.

Demolition of precast cement concrete articles and precast concrete block walling built in cement mortar.

M&L for PCC 1:3:6 type C2 block masonry with solid blocks, exc 10cm in width and setting in cement mortar 1:4 complete.

M&L for precast cement concrete 1:3:6 type C1 using 20 mm graded aggregate block solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed ) complete set in CM 1:4.

Demolition of cement concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level).

Demolition of cement concrete of any description and in any situation not otherwise specifically provided for.

M&L for 75 mm thick plain cement concrete type C-1, 1:3:6, (40mm graded stone aggregate)as in plinth protection, finishing the top surfaces even and smooth W/O using extra cement.

M&L for 20mm thick screed bed or bedding layer in CM (1:6) finished rough for laying floor finishes.

M&L for Chequered cement concrete tiles 200x200x25mm etc. set and jointed and pointed in neat cement slurry in floor with grey cement and pigment all as directed.

M&L for 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in paving and spike rolling to surface or making impression of expended metal whilst the concrete is green.

M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate in foundations, filling and mass concrete.

M&L for Plain cement concrete (1:3:6) type C-2, using 40mm graded stone aggregates in surface channel, bed of drains incl form work / moulds complete all as directed.

Extra for fair finishing drain or channels 30 cm inner girth in cement concrete using extra cement including forms, moulds etc.

Add or deduct item no 21 above for each 25mm inner girth or part there of over or under 30cm inner grith in cement concrete using extra cement including forms, moulds etc.

Taking down cement plaster on brick, concrete stone surfaces etc including raking out joints, hacking for key, scrubbing down with water etc.

M & L for 10 mm thick rendering on cement mortar 1:6 on brick or concrete surfaces finished even & smooth without using extra cement on walls.

M & L for 15mm thick rendering in cement mortar 1:6 on brick or concrete wall surfaces finishing the surfaces even & fair.

Preparing newly plastered surfaces of walls and applying three coats of white wash.

M&L for rendering 15mm thick in CM 1:4 on concrete surfaces finished even and smooth with neeru finish using extra cement .

Taking down 15mm bore GI tubing and connections complete all as specified and directed.

Taking down 20mm bore GI tubing and connections complete all as specified and directed.

S&F 15mm dia tube medium grade galvanised,with all fittings laid in trenches. to walls and ceilings or laid in floors

S&F 20mm dia tube medium grade galvanised,with all fittings laid in trenches. to walls and ceilings or laid in floors

Dismentling plain or corrugated steel sheeting of any thickness as in roof and wall covering

S&F 0.63 mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with L-type or J-type or cranked hook bolts in lieu of screws and washers, in roofs, walls etc. with grade of zinc coating 275 gsm.

S&F 0.63 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings ( length and girth as fixed) with grade of zinc coating 120 gsm.

M&L for preparing and applying two coat of synthetic enamel over a priming coat on new zinc (or galvanised ) surfaces to receive painting, by coating with mordant solution including washing and cleaning etc. of any description, not otherwise described, over 10 cm width or girth.

S&F pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specifie

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

Dismantling of wall and ceiling boards of any thickness including cover fillets.

M & L for 6 mm thick ply wood, grade BWR, type BB, fixed with nails to timber frame work on wall surfaces.

M & L for 4 mm thick ply wood, grade BWR, type BB, fixed with nails to timber frame work on ceiling surfaces.

M & L for 12mm thick ply wood, grade BWR, type BB, fixed with nails to timber frame work.

Disantiling timber scantlings 40 sq.cm and over in section, in any position.

Disantiling timber scantlings n.exc 40 sq.cm in section, in any position

M & L for second class hard wood in scantling cleane sawn in framed work.

M & L for 2 nd class Hard wood plain fillets, square, rectangular or triangular in section,wrought, secured with nails or brads, sectional area exc 6 but n.exc 13 sq.cm.

Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frames)

Taking down Chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frame)

M&L for 2nd class hard wood plain solid straight chowkats and frame wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

Supply and fix 30mm thick 2nd class hardwood plain framed paneled shutters (any numbers of panels) with panel of timber flat on both sides (feather edged) complete including fitted to chowkats.

M&L for Glazed and skeleton shutters 30mm thick 2nd class H/W open rebated and prepared to receive glass, gauze tec (without sash bars) edges of framing plain chaqmfered or rounded fitted with cut and mitred beads for securing glass tec sizes of members of shutters as specified in SSR Part I Section 8 clause 8.20 (a) supplied and fitted to chowkats.

Supply and fix 100mm long MS butt hinge medium weight cold rolled.

Supply and fix 75mm long MS butt hinge medium weight cold rolled.

Supply and fix aluminium anodized barrel tower bolt 150mm long extruded section.

Supply and fix aluminium anodized barrel tower bolt 100mm long extruded section.

Supply and fix 75mm size aluminium anodized handle fabricated type.

Supply and fix 125mm size aluminium anodized handle fabricated type.

Supply and fix 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy.

Hacking out old broken glass (any thickness, size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beading in squares not exceeding 0.5 Sq. M in each pane.

S&F MS window guard bars, window frames,Lor T section supports for shelves etc and similar articles confirming to Fe 290-0 or E-165.

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples

S&F in repair Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples

S&F PVC Waste pipe 32mm/40mm dia low density polyethylene (LDPE) pipes of pressure rating 6 Kgs/sq.cm complete

S&F in repair hand shower (health faucet) with 1 meter long easy flex tube in Chrome Finish and wall hook screwed down for 15mm bore iron pipe complete all as specified and directed

S & F in repairs chromium plated fancy type 15mm dia bib tap, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specifed.

S & F in repair Angular stop valve 15 mm bore cast copper alloy with capstan heads, chromium plated screwed down high pressure, with or without lettered "hot or cold" with long screwed shanks and fly nuts, screwed for iron pipe and fixed, but fancy type

S & F in rep vitreous china wash down water closet pan of pedestal pattern, white with 'P' or 'S' traps, including connecting to trap and to flushing pipe etc complete all as specified. (Make: Hindware /Parryware /Cera /Commander)

S & F in repairs PVC seat covers (white) closed pattern with flat bottom and cover and hinging device for EWS.

S & F in repairs 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve, float, chain and pull and brackets etc complete. (Make: Hindware /Parryware /Cera /Commander)

S & F in repair PVC connection 15mm dia 450 mm long with brass check nuts and washers

S&F vitreous china wash hand basin white flat back of size 580x450 mm including cutting for and pinning in end of brackets.

S&F in repair pillar tap cast copper alloy of 15mm size with capstan head chromium plated fancy type screwed down high pressure.

S&F for 15mm stop valve, cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed fancy type chromium plated with long shank and cup (concealed type)

Dismantling of CI/PVC, rain water pipes, cast and vent pipes of any dia, any pattern including all fittings etc complete all as specified and directed.

Supply and fix for 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

Supply and fix for 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

Supply and fix 110mm bore PVC (SWR) bends any radius with access door complete all as specified and directed.

Supply and fix 75mm bore PVC (SWR) bends any radius with access door complete all as specified and directed.

Supply and fix 110mm bore PVC (SWR) junction single , (single T) equal or unequal with access door complete all as specified and directed.

S&F in rep PVC (SWR) floor trap, 75mm dia outlet, plain with grating incl jointing with solvent cement.

S&F CP brass Tubular towel rail, 20mm dia, D type, 60cm long between flanges.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition).

Material and labour for providing pre-cast RCC (1:2:4) type 'B-1' as in cover slabs of manholes and similar location (using 20mm graded crushed stone aggregates) including necessary form work and set in cement mortar (1:4).

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Material and labour for preparation of old treatment on external surfaces of walls and washing down with water to receive the surface and applying one coat of cement base paint (colour and tint as approved) on walls etc complete all as specified and directed.

Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

M & L for preparing new wooden surfaces of any description, not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

S&F waste coupling PTMT 40mm (half or full threaded) min weight 60gms

S&F 20 mm dia ball brass valves high presure with polythene Float valve and fly nut complete screwed for iron pipe or brass ferule and fixed

S&F 20mm stop valve, cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed.

S&F 15mm stop valve, cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed.

M&L for rep/replacing locking arrangement of steel lockers of any size including, locking rod, handle and mortice lock make goodrej or equivalent including necessary welding of shutters as required for complete functioning of locker complete.

M&L for rep/replacing locking arrangement of steel lockers of any size including, locking rod, handle and mortice lock make goodrej or equivalent

Dismantling of water tanks exc 250 Ltrs & n.exc 500Ltrs capacity and removing to store

S&F 500 Ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.

Dismantling of water tanks exc 500 Ltrs & n.exc 1000Ltrs capacity and removing to store

S&F 1000 Ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.

M/S SM ANSARI

M/S DKT CONSTRUCTION

M/S RARAI ENTERPRISES

M/S R D TRADERS

M/S SUNRISE CONSTRUCTION AND CO

M/S YOGENDRA CONSTRUCTION CO

PT constuction