COMPREHENSIVE MAINTENANCE OF DEFECTIVE ITEMS OF INTERNAL ELECTRIFICATION AND MISC ITEMS OF OTM BUILDINGS AT 9 BRD, INTERNAL ELECTRICAL SUPPLY SYSTEM IN VIMAN NAGAR AND CHANDAN NAGAR AND PETTY REPAIR TO INTERNAL FITTING, FIXTURES AND MCBS, DBS IN AKAS

Amount

M&L for Carrying out day to day comprehensive maintenance of domestic area [(i)Viman Nagar and Chandan Nagar SMQ and other Domestic Bldgs, (ii) OTM/Tech and other Domestic Buildings of 9 BRD, (iii) Akash Nagar and Burma Shell SMQ and other Buildings] internal eletrification complaints by Collecting from complaints cell daily between 9.00 am to 10.00 am and repairs in situ or attending of complaints of domestic area. After rectification the specified complaint job card shall be returned on same date. Nature of defects such as repair/replacement of switches, fuse wires, DB, MCB (light/ power), lamp holder (bracket, pandent, batten) bell/buzzer, push button, ceiling rose, capacitors and other similar electrical items/fittings, repairing of fan and geysers etc including providing of small pieces of electrical wire of size 1.5 sqmm to 10 sqmm single core/ two core and length not exceding 1.5 mtrs complete all as specified and directed. (Note :- any accessories as mentioned above found unserviceable shall be measured and paid separately under respective items of this Sch. However any minor requirement essential for making overall system serviceable is deemed to be included in the quoted rate of this item.)

Note for Ser Item No 1.00 : (i) Contractor shall provide his representative’s authorized contact No. and local address to contact and communicate the message of any breakdown/complaint. Contactor’s representative shall visit the MES complaint cell to collect day to day complaints of any nature/type. For essential services, Contractor’s representative shall be available 24x7 to attend complaint as called upon by Engr-in Charge. (ii) Penalty for not rectifying the defect in given time shall be charged to contractor at the rate of ₹100 per complaint from due payment of works/RAR/Final bill. (iii) Complaints shall be treated as rectified only after production of user’s “Satisfactory Job Slip duly signed” to Engr-in-Charge. (iv) Old material obtained from replaced items under this item shall be contractor's property and shall be measured as Schedule of credit and shall be Issued to contractor at the time of RAR payments. (v) Cost of minor spares i.e, insulation tape, lugs, thimbles etc are deemed to be included in the quoted rate. Labour required to carryout the maint / repairs including testing shall be deemed to be included in item rate as quoted by the contractor.Items replaced shall be measured and paid seperately. (vi) Cost of T&P i.e, ladders, tools, brazing, welding, soldering etc as required and transportation is deemed to be included in quoted rates. (vii) Making good the area / cleaning the area will be mandatory for the contractor & failing which penalty of Rs. 50/- shall be charged. (viii) Separate team (1 electrician + 1 helper) of manpower shall be provided for each locations as per Item No. 1.00 [(i)Viman Nagar and Chandan Nagar SMQ and other Domestic Bldgs, (ii) OTM/Tech and other Domestic Buildings of 9 BRD, (iii) Akash Nagar and Burma Shell SMQ and other Buildings] regularly (ix) No repeated complaints will be counted for which the repairs already done for same item of same occupant/OTM/Tech building.

M & L for repair/replacement of the following items if required against Ser Item No.1.00

Supply and fix switch piano flush type 5 A one way complete all as specified and directed.

Supply and fix socket 2 in one 5 Pin 5 Amps complete all as specified and directed.

Supply and fix switch socket combination multipurpose 3 pin 6/16 Amps complete all as specified and directed.

Supply and fix switch socket combination multipurpose 3 pin 5 Amps complete all as specified and directed.

Supply and fix switch piano flush type 15 Amps complete all as specified and directed.

Supply and fix Socket out let 2 in 1, 3 pin 5 and 15 Amps complete all as specified and directed.

Supply and fix Piano switch bell push type switch 5 A complete all as specified and directed.

Supply and fix bell electric 230V single pole complete all as specified and directed.

S & F Fan Regulator electronic step type 100 W complete all as specified and directed.

S&F angle / batten holder insulated body with back plate for batten fittings complete all as specified and directed.

Supply and fix ceiling rose surface type bakelite/PVC three terminal 65x50mm complete all as specified and directed.

S & F Modular switch 1 way 6A, 1 module matching to as existing on site complete all as specified and directed.

S & F Modular switch 1 way 16A, 1 module matching to as existing on site complete all as specified and directed.

S & F Modular Bell push 1 module, 5 amp matching to as existing on site complete all as specified and directed.

S & F Modular socket 6 A 2 module matching to as existing on site complete all as specified and directed.

S & F Modular socket 16 A 2 module matching to as existing on site complete all as specified and directed.

S & F Modular Fan Regulator 120W 2 module matching to as existing on site complete all as specified and directed.

S & F modular cover plate with frame 4 module matching to as existing on site complete all as specified and directed.

S & F modular cover plate with frame 6 module matching to as existing on site complete all as specified and directed.

S & F modular cover plate with frame 8 module matching to as existing on site complete all as specified and directed.

S & F modular cover plate with frame 3 module matching to as existing on site complete all as specified and directed.

S & F PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 100 mm x 100 mm and 50 mm deep complete all as specified and directed.

Ditto all as per Ser Item No. 24.00 above but 175 x 100 x 50 mm complete all as specified and directed.

Ditto all as per Ser Item No. 24.00 above but 200 x 150 x 50 mm complete all as specified and directed.

Fixing only and connecting electric meters Issued Under Sch "B" free for fixing including taking down old meters.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix high quality indoor Surface and wall mounted LED batten 20 Watt, provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver with industrial grade heavy duty driver having THD<10%. complete with all accessories internally pre-wired and including connecting up with three core 0.5 Sqmm flexible copper conductor cable ceiling rose to fitting terminal complete all as specified and directed.

Supply and fix Energy efficient recess mounted LED panel fitting 36 Watt suitable for 2x2 grid in white colour with high quality diffuser for uniform light & high Efficiency. Made from CRCA sheet, Pre-coated white color. Separate replaceable electronic driver, lumen constant of 5700/6500K colour temperature with current electronic connections complete all as specified and directed.

Supply and fix sheet metal enclosure MCB DB double door SPN 12 way 230 V with neutral link and with 200 A bus bar complete all as specified and directed.

Supply and fix sheet metal enclosure MCB DB double door SPN 8 way 230 V with neutral link and with 200 A bus bar complete all as specified and directed.

Supply and fix sheet metal enclosure MCB DB double door SPN 4 way 230 V with neutral link and with 200 A bus bar complete all as specified and directed.

Supply and fix MCB SPN 40 Amp, 230 volt 'C' series complete all as specified and directed.

S&F MCB SP 240 volt 6 to 32 A 'C' series complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 225/230 mm sweep with, blades, and frame and louver complete all as specified and directed.

Supply and fix wall fan AC single Phase. 230V of size 400 mm sweep complete all as specified and directed.

S & F Electronic Ballast suitable for 1x 36/40 Watt tube light fitting complete all as specified and directed.

S & F Electronic Ballast suitable for 1x 28 Watt tube light fitting complete all as specified and directed.

S & F LED PL Tube 18 Watt 4 pin suitable for any type fitting as required on site complete all as specified and directed.

S & F LED retrofit tube in built driver suitable for T-5 Tube light fitting 4 feet long complete all as specified and directed.

S & F LED retrofit tube in built driver suitable for T-8 Tube light fitting 4 feet long complete all as specified and directed.

S & F Tube rod 36 Watt complete all as specified and directed.

S & F Tube rod 28 Watt complete all as specified and directed.

S&F in replacement bipin holder rotary type suitable for T8/T8 FTL Lamp complete all as specified and directed.

M & L for sub main wiring with two runs of single core 4.0 Sq mm FRLS PVC insulated unsheathed multi stranded copper conductor 650 / 1100 V grade with colour code and one run of 2.5 Sq mm ( 22 / 0.3 mm ) single core FRLS PVC insulated unsheathed multi stranded copper conductor green colour cable as earth continuity conductor including PVC casing & caping complete all as specified and directed. ( Note :Two runs of 4.0 Sqmm copper cable,one run of earth wire of 2.5 Sqmm copper cable including PVC casing & caping shall be measured & paid as one length.)

M & L for sub main wiring with two runs of single core 6.0Sq mm Flame retardant PVC insulated unsheathed multi stranded copper conductor 1100 V grade with colour code and one run of 4.0 Sq mm single core Flame retardant PVC insulated unsheathed multi stranded copper conductor green colour cable as earth continuity conductor drawn in & including casing & caping complete all as specified and directed. ( Note:- Two runs of 6 Sqmm copper cable & one run of 4 sqmm copper cable including PVC casing & caping shall be measured & paid as one length )

M & L for sub main wiring with two runs of single core 10.0Sq mm Flame retardant PVC insulated unsheathed multi stranded copper conductor 1100 V grade with colour code and one run of 6.0 Sq mm single core Flame retardant PVC insulated unsheathed multi stranded copper conductor green colour cable as earth continuity conductor drawn in & including casing & caping complete all as specified and directed. ( Note:-Two runs of 10 Sqmm copper cable & one run of 6 sqmm copper cable including PVC casing & caping shall be measured & paid as one length )

Ditto all as per Ser Item No. 46.00 above but 2x1.5 sq. mm + 1x1.5 sq. mm as earth wire complete all as specified and directed.

Ditto all as per Ser Item No. 46.00 above 2 x2.5 sq. mm + 1x1.50 sq. mm as earth wire complete all as specified and directed.

S & F PVC Casing & Capping with connected accessories

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300 mm complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm complete all as specified and directed.

Taking down ceiling fan single phase 240 V 1200 mm /1400mm sweep from the existing position including disconnecting supply cable from ceiling rose / connector opening ceiling fan carefully and taking out worn out/defective spare parts such as bearing/ bush shaft , blades, split pin condenser rubber reel nuts and bolts and washer etc cleaning and washing the bearings /bushes thoroughly and applying necessary lubricants etc and reassembling of ceiling fan after replacement of wornout parts and hanging in original position connecting and testing complete all as specified and directed. [Note :- Replacement of spares for ceiling fan shall be measured and paid seperately]

Ditto all as per Ser Item No 54.00 above but for exhaust fan 300 / 450 mm sweep complete all as specified and directed.

Ditto all as per Ser Item No 54.00 above but for wall mounting fan any sweep complete all as specified and directed.

Supply and fix ball bearing SKF 6201 complete all as specified and directed.

Supply and fix ball bearing SKF 6202 complete all as specified and directed.

Supply and fix ball bearing SKF 6203 complete all as specified and directed.

S&F Gunmetal bush suitable for existing fans complete all as specified and directed.

Supply and fix capacitor 2.5 Mfd /3.15 mfd complete all as specified and directed.

Supply and fix capacitor 4 Mfd complete all as specified and directed.

Supply and fix rubber reel with nuts bolts and split pin for ceiling fan complete all as specified and directed.

Supply and fixing PVC unsheathed 3 core cable copper flexible wire 0.5 Sqmm size complete all as specified and directed.

M&L for rewinding of ceiling fans of 1200 / 1400 mm sweep with suitable size of copper winding wire of same gauge & number of turns complete all as specified and directed.

M&L for rewinding of exhaust fans of 300 / 380 / 450 mm sweep with suitable size of copper winding wire of same gauge & number of turns complete with insulation complete all as specified and directed.

M&L for rewinding of wall fans of 400 mm sweep with suitable size of copper winding wire of same gauge & number of turns complete with insulation complete all as specified and directed.

S&F fan clamp suitable for ceiling fan complete all as specified and directed.

S&F fan blade suitable for existing wall mounting fan / exhaust fan complete all as specified and directed.

Taking down Geyser 25/50 Ltrs from the existing position including disconnecting supply cable from connector opening geyser carefully and taking out worn out/defective spare parts such as Thermostat, appratus terminal plate, glass wool, element etc cleaning and reassembling of geyser after replacement of wornout parts and hanging in original position connecting and testing complete all as specified and directed. [Note :- Replacement of spares for geyser shall be measured and paid seperately]

Supply and fix thermostat suitable for geyser of any make and any size complete all as specified and directed.

Supply and fix indicating neon lamps suitable for geyser of any make complete all as specified and directed.

Supply and fix apparatus terminal plate assembly with provision of inlet and outlet copper tubing including nuts bolts and washers suitable for geyser of any type complete all as specified and directed.

Supply and fix PVC connecting pipe heavy duty 15 mm dia for inlet and outlet with brass coupling complete all as specified and directed.

Supply and fix for glass wool suitable for any type and make for geyser complete all as specified and directed.

Supply and fix geyser element 250 V 1.5 KW suitable for 25 ltrs capacity complete all as specified and directed.

Supply and fix geyser element 250 V 2 KW suitable for 25/50 ltrs capacity complete all as specified and directed.

S&F Syphene assembly on existing geyser suitable for 25 Ltrs Geyer complete all as specified and directed.

Supply & fixing in replacement 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire one twin core cables stranded conductor flat or circular 6 Sqmm complete all as specified and directed.

Supply & fixing in replacement 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire one twin core cables stranded conductor flat or circular 10 Sqmm complete all as specified and directed.

M/s Harshal Traders