Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.5 LAccepted-AOC 4626 MALOYA CHANDIGARH | NA | NA | 160001 | ₹2.5 L | L1 | Accepted-AOC Being L1 |
| 2 | L2₹2.7 L+₹22,217.31 (8.82%)Rejected-Finance CHANDIGARH | ₹2.7 L+₹22,217.31 (8.82%) | L2 | Rejected-Finance L2 |
| 3 | L3₹3.0 L+₹50,823.92 (20.2%)Rejected-Finance CHANDIGARH | CHANDIGARH | CHANDIGARH | 160001 | ₹3.0 L+₹50,823.92 (20.2%) | L3 | Rejected-Finance L3 |
| 4 | L4₹3.1 L+₹53,728.14 (21.3%)Rejected-Finance 1090 GROUND FLOOR SECTOR 18 C CHANDIGARH | ₹3.1 L+₹53,728.14 (21.3%) | L4 | Rejected-Finance L4 |
Tender Value
₹3.6 L
EMD Value
₹7,265
Closing Date
14 Jul 2026, 12:00 pmClosed
Er. Gurpreet Singh Bhains
Office of the Executive Engineer, Electrical Division No. 1, Sector-9,Chandigarh.
MTC OF E.I IN NRB AT CHANDIGARH (PROVIDING FLEX ON EXISTING SCREEN NEAR NEELAM THEATRE AND REPAIR /MAKING OF FOUNDATION IN TIRANGA PARK SECTOR-17 CHANDIGARH)
2026_CHD_93865_1
E1/TN-200
Open Tender
Electrical Works
Percentage
30 days
Chandigarh
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹7,265
14 Sept 2026
8 Jul 2026
14 Jul 2026
8 Jul 2026
14 Jul 2026
8 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply & fixing of back lit Flex banner /Curtain of double layer size 10 Mtr x 6 Mtr, approx. on Existing MS structure frame at 10 Mtr Height from ground level with help of Hydraulic crane. The Job shall be done after dismantling the existing defective torn flex. The job also includes the cost of fixing material to fix the same on existing MS structure to the entire satisfaction of the EIC. The flex banner should be got approved from the Sub Divisional Engineer before installation at site. | 60 | Per Sq. Mtr. | 1,050 | ₹63,000 |
| 2 | Painting of foundation of size approx. 15”x15”x15” with M.S. Jali for existing bollard approx. 3’ height. The foundation shall be painted with apex paint and M.S Jali shall be painted with Green Paint. The job Includes the cost of repair of existing foundation with putty after cleaning the surface. The job also includes the cost of other petty material required to complete the job to the entire satisfaction of E.I.C. | 72 | Each | 350 | ₹25,200 |
| 3 | Painting of foundation of size approx. 15”x15”x15” with M.S. Jali for existing Bush light of approx. 1’ height. The foundation shall be painted with apex paint and M.S Jali shall be painted with Green Paint. The job Includes the cost of repair of existing foundation with putty after cleaning the surface. The job also includes the cost of other petty material required to complete the job to the entire satisfaction of E.I.C. | 63 | Each | 250 | ₹15,750 |
| 4 | S/E of cement concrete foundation of Size 15” wide X 15” Deep X 20” Height. The foundation shall be made from cement concrete 1:2:4 for erection of existing bollard / Bush fittings The job includes the cost of thermo plastic junction box IP 65/66 (weather proof) for outdoor installation having inside dimensions (mm) 200x140x90 minimum with 4 nos. (As per Complete Item No. 4 of the DNIT). | 32 | Each P. Job | 3,000 | ₹96,000 |
| 5 | Supply and Erection of sheet metal door of suitable dimensions to be installed at existing cubical pedestal of size 900mm x 1200mm x350mm deep. The job includes to cost of carriage, erection, labor charges and other petty material required to complete the job to the entire satisfaction of the EIC. | 1 | Each | 2,500 | ₹2,500 |
| 6Supply, erection, testing and commission of batteries of the following capacities after dismantling the old/defective batteries from the site. The job is including the cost of material and any other petty items as required at site to complete the job to the entire satisfaction of the E.I.C of the work. The battery should be Exide/Amron/Okaya/Rocket make only | |||||
| 6.01 | Sealed Mtc. free batteries 12 V 26 AH Capacity | 32 | Each | 4,645 | ₹1,48,640 |
| 7DSR Item No. 8.16.6 LED Flood Light, powder coated pressure die cast aluminum (System lumen efficacy ≥120 and <135 lm/Watt) Supplying, installation, Testing & Commissioning of Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, freq 50/60 hz, (As per Complete Item No. 7 of the DNIT). | |||||
| 8of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K/ 6500°K (As per ANSI Bin) SDCM (Standard Deviation Color Matching) <5, (As per Complete Item No. 8 of the DNIT). | |||||
| 8.01 | 250 Watt | 2 | Each | 5,969 | ₹11,938 |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.27 MB
Axxexure-1.pdf
Tender Documents • 0.32 MB
BOQ_115021.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .