REPAIR AND MAINT OF INTERNAL WIRING INCLUDING FITTING FIXTURES AND OTHER CONNECTED WORKS IN OFFICERS MD ACCN WO SNCOs DSML ML NP DSNP UNDER GE AF ADM AREA AT AF STATION AGRA

Amount

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc. to match the existing complete all as specified and directed.

M&L for point wiring complete for one light/fan/ exhaust fan point controlled by one, one way 5 Amp switch with PVC (FRLS) insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including 20mm dia 'medium grade' PVC concealed conduits ISI marked and fittings, including pressed steel concealed terminal switch boxes not less than 1.6 mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC(FRLS) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed.

All as per item No. 02 above but for One bell/ buzzer point on an independent board controlled by one bell push

All as per item No. 02 above but for one 5 pin 5 Amp socket outlet point on an independent board.

All as per item No. 02 above but for one 5 pin 5 Amp socket outlet point on the same board with other switch.

All as per Item No 02 above but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 2.50 Sqmm and green colour earth cable of size 2.50 Sqmm.

M&L for point wiring complete with PVC (FRLS) insulated unsheathed multistranded copper conductor of size 4 sqmm nominal cross sectional area single core drawn in and including not less than 20mm dia 'medium grade' PVC concealed conduits ISI marked and fittings, complete including 4 sqmm nominal cross sectional area PVC(FRLS) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed.

S&F Switch piano, flush type, single pole, one way 5/6 Amp 230 Volts complete all as specified and directed.

S&F bell push, flush type, single pole, one way 5/6 Amp, 230 volt flush type complete all as specified and directed.

S&F Switch piano, flush type, single pole, one way 15/16 Amp 230 Volts complete all as specified and directed.

S&F socket outlet, flush type, single pole, multipurpose 2 in 1, 5 pin 5/6 Amp, 230 volts complete all as specified and directed.

S&F socket outlet, flush type, single pole, multipurpose 2 in 1, 6 pin 15/16 Amp, 230 volts complete all as specified and directed.

S&F call bell, ding dong type, AC single pole, 230 volt complete all as specified and directed.

S&F Lamp holder/ angle holder PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F ceiling rose, 3 terminal, PVC/ Polycarbonate, insulated body, surface bakelite sheet 63.50 mm dia complete all as specified and directed.

S&F ceiling fan regulator, electronic, socket type, 5 speed 230 volts suitable for 1200/1400 mm sweep ceiling fan including necessary connection complete all as specified and directed.

S&F in replacement tube light fitting energy saving decorative LED batten type 20 watt (4 Feet), 230 volts, 6500 K energy efficient tube light fitting extruded aluminium/ CRCA housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete with all accessories prewired and including making connections with 3 core twisted flexible copper cable of size 23/.0076 from ceilling rose/PVC connector to light fittings complete all as spd and directed. Make-Philips BN 021 LED22S PSU CW GR/Havells LUMILINEPLUSBS20WLED865SPCSS or equivalent in Crompton CCS-100-20-65-HL2-DP-NWH.

S&F in replacement tube light fitting with energy saving decorative batten type 9/10 watt energy efficient tube light fitting (2 Feet) highly durable surface mounted LED batten constructed of fire retardent engineering grade extruded plastic and decorative end caps with all accessories prewired and making connection with 3 core copper flexible cable of size 23/.0076 from ceilling rose/PVC connector to light fittings. Make:-Philips BN 021 LED12S 6500 PSU GR/Havells LUMILINEBS9WLED865SPCWH or equivalent Crompton LDL-10-CDL.

S&F in replacement bulk head light fitting made from cast aluminium body with heat resistance pressure die cast housing, IP-65 protection cover suitable for bulk head fitting integrated type 6.5 W LED 6000K including inbuilt electronic driver complete all as specified and as directed. Make: Philips ordering code : WT140WLED7SCWPSUS1PC/ Havells hexa 10 W- IP 66 ordering code: HEXAFT10WLED857SSYMBOPC/C&S (Sirius Series) ordering code: LTB10WLED

S&F decorative wall light fixture made up of polycarbonate suitable for 9 watt LED lamp B22 base complete all as directed. Make: Havells LHFOFWE1TZ1W012 or equivalent in Philips/Crompton

S&F in replacement of existing unsv ceiling light with recess slim LED panel 30W (1x4`) with white powder coated extruded aluminium body complete all as specified and directed. Make:- Phlips Cat Ref RC380B LED30S-6500GS L3W12 PSU OD/ Crompton Cat Ref LCLR66-30-CDL/ HAVELLS Cat Ref PLUTONEO4X1PLR30WLED840S.

S&F in replacement of bldg security light fitting energy saving high efficiency LED street light fitting 20/25 Watts, 5700 K, IP 66, Having pressure die cast housing with toughened glass and individual hgh power LEDs with secondary optics, prismatic polycarbonate cover complete inclduding GI pracket of size 32 mm dia bent to shape having length on less than 1.2 mtr fixing with clamp etc and making connections using flexible 3 core copper cable of size 23/.0076 from ceilling rose/PVC connector to light fittings or as directed. Make:- Crompton Cat Ref LSTS-20-CDL-M(ASTRA NEO)/PHLIPS CAT REF BRP042LED 19 CW MR S1 PSU GR (SMART BRIGHT STREET)/WIPRO CAR REF LD 38-200-XXX-30-XX.

S&F in replacement of existing unsv light with recess round 15Watts LED down light, 3000K, aesthetically designed PC housing with constant driver including making all electric connection complete all specified and directed. Make:- Crompton Cat ref LSDEP-18-WW/Wipro Cat Ref LD98-271-024-40-xx***/ C&S Cat ref LTCRSLM18WLEDSQW DOWNLIGHT (CANOPUS-SQ/18W/W).

S&F in replacement of existing unsv light with recess round spot light 3 Watts LED down light, 3000K, aesthetically designed PC housing with constant driver including making all electric connection complete all specified and directed. Make:- Crompton Cat ref CDR-210--03-30-SL-NWH/Wipro Cat Ref LD38-200XXX-30-XX/Phlips Cat Ref 18W Sky Spot COB (CW).

Taking down ceiling fan of any sweep, dismantling blades, canopy etc., preparation of old painted surfaces by filling cavities etc., applying one coat of synthetic enamel paint by using spray gun and hanging the same in position and provn of new twin core twisted PVC insulated multistranded flexible copper conductor cable of size 23/0.0076 from ceiling rose to fan complete all as specified and directed.

S&F in replacement sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts, 8 way, including suitable size copper bus bar and neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces complete all as specified and directed.

S&F in replacement sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts, 4 way, including suitable size copper bus bar and neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces complete all as specified and directed.

S&F in replacement MCB single pole 240 volts, 'C' curve of rating from 6 to 32 amps, with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed.

S&F in replacement MCB SPN 240 volts, 'C' curve of rating 63 amps, with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed.

S&F in replacement MCB TPN 240 volts, 'C' curve of rating from 40 to 63 amps, with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed.

S&F in replacement sub main wiring with two single core PVC insulated (FRLS) unsheathed multistranded copper conductor of size 6 sqmm nominal cross sectional area and one run of 6 sqmm nominal cross sectional area PVC insulated (FRLS) unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including not less than 20mm dia 'medium grade' PVC concealed conduits (ISI marked) and fittings complete all as specified and directed. NOTE:- One unit length shall measured as two run of main wire and one run of conduit & earth wire.

S&F in replacement sub main wiring with two single core PVC insulated (FRLS) unsheathed multistranded copper conductor of size 4 sqmm nominal cross sectional area and one run of sqmm nominal cross sectional area PVC insulated (FRLS) unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including not less than 20mm dia 'medium grade' PVC concealed conduits (ISI marked) and fittings complete all as specified and directed. NOTE:- One unit length shall measured as two run of main wire and one run of conduit & earth wire.

M&L for removal of existing old unsv earthing complete and providing new earthing with galvanised steel earth plate electrode, 600 x600 x 6mm thick burried directly in the ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5mtr below ground level connected to galvanised iron wire 4mm dia as earth lead by means of bolts, nuts and washers of GI up to test point, GI tubing 15 mm bore medium grade protection pipe, GI watering pipe 20mm bore light grade with funnel and wire mesh, charcoal, salt complete all as per SSR with PCC chamber, 50mm thick RCC cover in 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 8mm dia TMT bar @ 80mm c/c both way including earth work in any type of soil , removal of surplus soil to a distance n.exc 50 m and connecting, testing on completion all as shown on electric plate No 03 of SSR -2009 Part I complete all as specified and directed.(Note: Excavation and earth work is deemed to be included in the rates quoted).

S&F LED smart lamp 14/15 watt, 6500 K, 230 volts complete all as specified and directed. Make : Havells LHLDDEHEMC8R015 or equivalent in Philips/Crompton

S&F in replacement sheet metal enclosures distribution boards, double door three phase 415 volts 4 ways vertical TPN DB for comprising three phase four wire copper strip bus bar of appropriate capacity complete all as specified and directed and comprising of the following (a) MCCB four pole 100 Amps AC 415 Volts 25 KA - 01 No. as incoming (b) 12 Nos. MCB SP 40 Amps, C curve rupturing capacity 10 KA as outgoing Note :- (i) The DB shall be flush fixed and making good the disturbed surface matching with existing specifications. (ii) All connection of the MCCBs/ MCBs with cable shall be made through appropriate size pin /bottle type thimble -properly crimped. (iii) All vacant holes of the DB shall be provided with blank plates of appropriate size. (iv) Double continuous earth wire shall be provided for each three phase DB from earthing mains dolly (v) MCB's should have a same make as of DB.

S&F in replacement MCCB 63 Amps 415 volts, 50 Hz, 4 pole 16 KA breaking capacity including providing thimbles for out going cable complete all as specified and directed.

S&F in replacement MCCB 100 Amps 415 volts, 50 Hz, 4 pole 16 KA breaking capacity including providing thimbles for out going cable complete all as specified and directed.

Supply and fixing in replacment 1100 volts grade heavy duty PVC insulated aluminium conductor, served with inner sheathing of PVC in service connections suspended by insulating hangers not more than 1 mtr apart including 4mm suspension wire one twin core cable of size 16 Sqmm multi -strand complete all as specified and directed .

S&F in replacement of existing unsv/ broken bakellite sheet cover 3 mm thick of size 5" x 5" all as required at site including cutting sheet for fixing switches/sockets, drilling holes for fixing screws and providing 4 Nos screws with washers for fixing the sheet to sunken box /wooden box.

S&F in replacement of existing unsv/ broken bakellite sheet cover 3 mm thick of size 7" x 4" all as required at site including cutting sheet for fixing switches/sockets, drilling holes for fixing screws and providing 4 Nos screws with washers for fixing the sheet to sunken box /wooden box.

S&F in replacement sheet metal enclosures, single pole with socket plug top and MCBs with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and directed.

Balaji Associate

Unnati Engineers

H.S.Kochhar n Sons

TRIVENI ASSOCIATES

S S TRADERS

GUPTA ENGINEERING WORKS

M/s Sumer Associates

jmd engineers