REPAIRS TO FLOORING WALL PLASTER CHAJJA STAIRS RUNGS PLINTH PROTECTION RTC AND POST CONSTRUCTION ATT IN CERTAIN MD AND OTM ACCN AT AUNDH MIL STN UNDER GE MH AND RH KIRKEE

Amount

Taking down cement or cement lime plaster of any description all as specified and directed .

M& L for rendering of external surface 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces finishsed including uprooting/cutting of vegetation growth (maximum height upto three stories) using WPC @ 3% by weight of cement all as specified and directed (Note: WPC will be measured and paid seperately)

M&L for providing water proofing plaster at the junction of wall and slab at chajjas , lintels, etc of average thickness 20mm in CM (1:3) with water proofing compound , finished even and smooth without using extra cement all as specified and directed. Note :- Rates shall deemed to be inclusive of Cost of water proofing compound.

Supply only intergral water proofing compound.

M & L applying two coats of cement base paint to newly plastered surface of wall including preparation.

M & L for complete removal of existing finishes, upto any height, by scraping down of old decorative surface of walls with steel wire brushes of smoke spots, moulds, efflorescent salts and cutting/uprooting vegetations growth, including filling of spots with POP and applying of two coat of cement base paint over a coat of primer and necessary prepation of surface all as specified and directed.

M&L for rendering of internal surfaces 15mm thick in CM (1:6) on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement ) all as specified and directed

M&L for of preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer finished even and smooth, all as speciified and directed

M & L for complete removal of existing finishes by scraping down old decorative surface of walls with steel wire brushes of smoke spots, moulds, efflorescent salts and applying two coats of oil bound distemper over a coat of alkali resistant primer all as specified and directed.

M&L for complete removal of existing finishes by scraping down old decorative surface of walls with steel wire brushes of smoke spots, moulds, efflorescent salts including filling of spots with POP and applying two coats of white wash on old surfaces of walls all as specified and directed.

M&L for rendering 10 mm thick on concrete surface in CM 1 :4 as in ceiling etc. all as specified and directed.

M&L for preparation of new plastered surface and for applying three coats of white wash on ceiling all as specified and directed.

M&L preparation of old surfaces applying of one coat of white wash on ceiling all as specified and directed.

Taking down shutters of any description exceeding 1.00 Sqm and n.exc 2.00 Sqm each and refixing the same after easing and adjusing in same opening all as specified and directed.

Dismantling/demolition floor, hearth or wall tiling including cement mortar bedding/complete and removing rubbish off the premises complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level ) all as specified and directed.

M&L Coloured Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile laid over and including 15 mm thick screed in CM 1:6 all as directed.

All as per item No 17 above but as in dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM 1:4, set and jointed in neat white or coloured cement to match the surfaces of tiles all as specified and directed.

M&L Coloured Non Skid ceramic joint free tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile laid over and including 15 mm thick screed in CM 1:6 all as directed.

All as per item No 19 above but as in dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM 1:4, set and jointed in neat white or coloured cement to match the surfaces of tiles all as specified and directed.

M&L Coloured Vitrified tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile laid over and including 15 mm thick screed in CM 1:6 all as directed.

M&L glazed ceramic tiles (350x250x7mm or 450x300x7mm) colour tiles on walls etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the work over 10 mm rendering in CM 1:4, all as specified and directed.

M&L glazed ceramic tiles in vertical surface 300 x 200 x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the work over 10 mm rendering in CM 1:4, all as specified and directed.

M&L for 25mm thick, levelling course of cement concrete type B-0 , 1:2:4 (12.5mm graded aggregate) as in flooring for laying tiles all as specified and directed.

M&L for 75 mm thick, PCC 1:4:8 type D-2 (using 40mm graded stone aggregate)as in sub base, all as specified.

M&L for Pre polished Chequered rubburised and glossy finish cement tiles 30cmx30cmx 25 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 20mm thick screed bed in cement mortar 1:6 completed.

M&L For Crushed sand filling to the floor including watering and consolidating all as specified and directed by Engr in Charge.

S&F Machine pressed precast prepplished rubburised concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade incl all as specified and directed by Engineer-in Charge.

M&L for PCC 1:3:6 type C-1 , 75 mm thick as in plinth protection, Path, floor construction joint after every 2 mtr interval and from wall will be filled by mastic of bitumen all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness laided bedded and pointed in any cement mortar in floors, aprons etc.

M&L machine cut kota stone slab flooring 20-25mm thick in flooring but one piece as in treads of straircase etc over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing moulding complete, over 15 mm thick screed bed or bedding in CM 1:6for laying floor finishes, all as specified and directed.

All as item No 31 here in before but in one piece on vertical surface as skirting over and incl 10 mm thick rendering in CM 1:3 to receive kota stone/slab etc all as specified and directed.

M&L for Granite slab 18-20 mm thk machine cut bedded and jointed with grey cement and pointed and adhesive of pigment to match the shade including cutting with polshing rounding moulding etc, laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1 :6, all as directed.

All as per item No 33 above here in before but 20 mm thick Machine cut Cudappah stone in floor or in any position of any colour and shape as specified and directed.

Polishing of old existing Kota stone flooring i.e, cutting , grinding, joints pigment filling and polishing to get mirror finish all as specified and directed.

Demolition of brickwork or stone work/boulder masonary built in cement mortar or cement lime mortar all as specified

M&L for precast cement concrete, type C-1, 1:3:6 (20mm graded aggregate ) masonary with solid blocks, exc 10cm in width and setting in cement mortar (1:6) complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store.

S & F 15 mm bore tubes, medium grade, galvanised, with all fitting & fixed complete to walls & ceiling or laid in floors.

Fixing only tubes of 15 mm bore, any grade, to walls and ceiling or laying in floors.

Cutting chases, pinning in concrete block walls, making good to facing where required and pointing in cement mortar (1:3) and making good , cutting n.exc 10cm girth all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store.

S & F 20 mm bore tubes, medium grade, galvanised, with all fitting & fixed complete to walls & ceiling or laid in floors.

S&F in repairs 15mm dia bore Bib taps, cast copper alloy CP with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed

S&F in repairs 15mm Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed all as directed (Make : Sieko or equivalent)

S & F in repair PVC valveless syphonic action type flushing cistern (Low or high level) of 10 litre capacity, white/coloured with inlet ball valve, float, handle including fixing brackets and 32 mm bore PVC flush pipe etc complete all as specified and directed. (Make : CERA, Shakti or Equivalent )

S & F in repairs Vitreous China Squatting pan Orissa pattern long pan, size 580 mmX440mm white with `P' or `S' trap, front or back inlet and foot rests any pattern including connection to trap and to flushing pipe, anti-syphonage pipe etc, including trap set in and including concrete complete including making good to floor all as spfd and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white fixing bolts (excluding flushing cistern) but including flush pipe, connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe complete , all as specified and directed.

S&F in repairs vitreous china wash hand basin, white of size 450mmx 300mm (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe.

S&F in repairs Cast iron soil 100 mm bore , waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors

S&F in repairs Cast iron floor trap 100 mm bore with grating including jointing to waste pipe and fixed with PCC 1:2:4 , all as specified and directed.

S&F 75mm dia PVC (SWR) pipe in floor or in trenches complete all as specified and directed including taking down existing pipe.

M&L for PCC 1:2:4 type B-1 , 100 mm thick path, floor, parking etc construction joint after every 2 mtr interval and from wall will be filled by mastic all as specified and directed.

M/S SUGAM CONSTRUCTION

Sunrise Traders

S.R.M.K Enterprises

VP DEVELOPERS AND CONTRACTOR

Shri Sant Cosntruction

MAHESH DADAJI BACHHAV

Ganesh Sonajirao Garje