Annual maintenance contract for electrical works of housing areas Jankipuram Sector K Aliganj and Nirala Nagar dispensary of CDRI

Amount

Point wiring

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required: Group ‘B’.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ heavy gauge PVC conduit as required.

1)2x1.5 Sq.mm

2)3x1.5 Sq.mm

3)2x2.5 Sq.mm

4)3x2.5 Sq.mm

5)2x4 Sq.mm

6)3x4Sq.mm

7)2x6 Sq.mm

8)3x6 Sq.mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required:

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

1)1 way 5/6 amps

2)1 way 15/16 amps

3)5 Pins Socket 5/6 amps

4)6 Pins 15/16 amps socket

5) Bell push

Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

Supplying and fixing brass batten/ angle holder including connection etc. as required.

Supplying and fixing following size/modules.GI box along with modular base and cover plate for modular switches in recess etc as required.

a) 1 or 2 Module (75mmX75mm)

b) 3 Module (100mmX75mm)

c) 4 Module (125mmX75mm)

d) 6 Module (200mmX75mm)

e) 8 Module (125mmX125mm)

f) 12 Module (200mmX150mm)

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Installation, testing and commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.

a) Upto 450 mm sweep

Extra for fixing the louvers/shutters completes with frame for exhaust fan of all sizes.

Supply and fixing 5 amps to 32 amps. rating 240/415 volts, ‘C’ curve miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc as required.

i) Single pole

ii)Single pole and neutral

iii) Triple pole

iv)Triple pole and neutral

Supply and fixing single pole blanking plate in the existing MCB D.B. complete etc. as required.

Supply and fixing following rating, double pole, 240 V isolator in the existing MCB D.B. complete with connections, testing and commissioning etc as required.

i) 40 amps.

ii) 63 amps.

Supplying and fixing DP sheet steel enclosure on surface/recess along with 25/32 A, 240 V “C” curve DP MCB complete with connections, testing and commissioning etc. as required.

Supplying and fixing TP sheet steel enclosure on surface/ recess along with 16/25/32 A, 415 V “C” curve TP MCB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

a) 6way, Double door

b) 8way, Double door

c) 12way, Double door

d) 16 way, Double door

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)

a) 4 way (4 + 12), Double door

b) 8 way (4 + 24), Double door

c) 12 way (4 + 36), Double door

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

a)100 A, 16 KA,TPMCCB

b)125 A, 16 KA,TPMCCB

c)150 A, 16 KA,TPMCCB

d)200 A, 16 KA,TPMCCB

e)315 A, 35 KA,TPMCCB

f)400 A, 50 KA,FPMCCB

e)630 A, 50KA,FPMCCB

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following sizes direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required:

a)Upto 35 sq.mm

b)Above 35 sq.mm and up to 95 sq.mm

c)Above 95 sq.mm and up to 185 sq.mm

d)Above 185 sq.mm and up to 400 sq.mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.

a) Upto 35 sq. mm

b) Above 35 sq. mm and upto 95 sq. mm

c) Above 95 sq. mm and upto 185 sq. mm

d) Above 185 sq. mm and upto 400 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.

a) Upto 35 sq. mm

b) Above 35 sq. mm and upto 95 sq. mm

c) Above 95 sq. mm and upto 185 sq. mm

d) Above 185 sq. mm and upto 400 sq. mm

Laying and fixing of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 K V grade of following sizes on wall surface as required:

a) Upto 35 sq.mm (clamped with 1mm thick saddle)

b) Above 35 sq.mm and up to 95 sq.mm (clamped with 25x3mm MS flat clamp)

c) Above 95 sq.mm and up to 185 sq.mm (clamped with 25/40x3mm MS flat clamp)

d) Above 185 sq.mm and up to 400 sq.mm (clamped with 40x3mm MS flat clamp)

Supplying and making end termination with brass compression gland & heavy duty lugs for the following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grades as required:

a)3½ X 25 sq. mm (28mm)

b) 3½ X 35 sq. mm (32mm)

c) 3½ X 50 sq. mm (35 mm)

d) 3½ X 70 sq. mm (38mm)

e) 3½ X 95 sq. mm (45 mm)

f) 3½ X 120 sq. mm (45 mm)

g) 3½ X 150 sq. mm (50 mm)

h) 3½ X 185 sq. mm (57mm)

i) 3½ X 240 sq. mm (62mm)

j) 3½ X 300 sq. mm (70 mm)

k) 4 X 10 sq. mm (25 mm)

l) 4 X 16 sq. mm (28mm)

Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.

a) 3½ X 70 sq. mm

b) 3½ X 95 sq. mm

c) 3½ X 120 or 150 sq. mm

f) 3½ X 300 sq. mm

Excavation of the cable trenches in hard rock not exceeding 1.5 meter in width, and lift upto 1.5 meter, including getting out the excavated soil and disposal of excavated soil as directed within a lead of 50 meter.

Providing 15 mm thick cement plaster of mix 1:4 (1 cement : 4 fine sand) at all levels.

Providing and fixing M.S. Fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete as required.

Supply of 1.1KV grade, PVC insulated and PVC sheathed heavy duty aluminium conductor cables of following sizes etc as required:

a)4 x 10mm square

b)4x 16mm square

c) 3&1/2 x 25mm square

d)3&1/2 x 35mm square

e)3&1/2 x 50mm square

f)3&1/2 x 70mm square

g) 3&1/2 x 95mm square

h) 3&1/2 x 120mm square

Supply & installation of following type of energy efficient LED light fitting along with accessories and manpower, including dismantling of defective light fitting, etc as required:

a)18 or 20 Watt, 4feet stand alone industrial type

b)9 or 10 Watt, 2feet stand alone industrial type

c) 14 Watt, Lamp WW or CW, Pin type energy efficient LED light/Bulb

Dismantling of defective existing office light fixture or fan or point wiring and handing over the material to electrical section as required.

Dismantling of sub main wiring from the surface or reccessed , restoring the surface & handing over the materials to the electrical section, etc as required.

Dismantling of existing or defective old metal clad power switches, MCB enclosures, DB’s, after disconnection of cables / wires, restoring of walls and handing over the material to electrical section, etc as required.

Dismantling of various sizes of cable from the surfaces, restoring the surfaces & handing over the materials to electrical section, etc as required.

Supply & mounting of 3 or 4 pole, 63 Amps, 16KA, 415V MCCB on existing mild steel box or enclosure, etc as required.

Supply & fixing of sheet steel enclosure box for fixing of 63 or 100 or 125 or 160 or 200Amps 3 or 4 pole MCCBs etc as required.

Providing and fixing of 3mm phenolic laminated sheet/perspex sheet on existing metal board/box etc as required.

Supply & fixing of PVC junction box, 200mmx250mm in size, should have panel type locking & incorpoprating arrangement for fixing of MCB & connector, including all the consumable hardwares, etc as required.

Supply & fixing of 4 pole, double stud type bakelite terminal for connection of power cable in street light circuit, including fixing in the existing junction box or pole & connections, etc as required.

Supply & laying of 6 SWG GI earth wire along with existing aluminium power cable including end termination with proper size of lugs etc as required.

Repairing of ceiling, wall mounted and pedstal fan including all the materials and mapower, etc as required:

a) Replacement of capacitor of 2.5MFD

b) Rewinding

c) Replacement of defective bearings of all sizes

d) Trimming/ cutting of blades & re-installation

Repairing of all type of exhaust fan (above 300mm sweep) including all the materials and mapower, etc as required:

a) Replacement of capacitor of 2.5MFD

b) Rewinding

c) Replacement of defective bearings of all sizes

d) Re-installation

Repairing of all type of fresh air fan (Up to 225mm sweep) including all the materials and mapower, etc as required:

a) Replacement of capacitor of 2 MFD

b) Rewinding

c) Replacement of defective bearings of all sizes

d) Re-installation

Attending of electrical breakdowns and to carry out emergent nature of works, providing of following technical manpower, as and when required:

a)Electrician (Semi-Skilled/Grade-II)

b)Helper

Supply & fixing of following sizes of single phase, 230 volt, 50Hz metallic ceiling fan, etc as required:

a)1200 mm sweep

b)1400 mm sweep

Supply & fixing of following sizes of single phase, 230 volt, 50Hz metallic exhaust or fresh air fan, etc as required:

a)225 mm sweep

b)300 mm sweep

Supply and fixing 63 amps. rating 240/415 volts, ‘C’ curve miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc as required:

a) Single pole

b)Single pole and neutral

c) Triple pole

d) Triple pole and neutral

Supply & fixing of MCB sheet steel enclosure box, etc as required:

a) SPN MCB Enclosure

b) FP/ TPN MCB Enclosure

Supplying and fixing call bell on the existing box excluding connections etc as required.

Supply and fixing of 40 amps,30 mA rating 240/415 volts, RCCB in the existing MCB DB complete with connections, testing and commissioning etc as required.

a) Single pole and neutral

b) Triple pole and neutral

Unlowering/lifting up of defective 30 HP submersible pump motor set from existing bore and its dismantling including charges of supply of manpower, tripod and transportation etc as required.

Rewinding of defective 30 HP submersible motor stator, supply & fixing of upper and lower housing bushes, oil seal, thrust plate with segment of motor, machining & turning i.e. lathe work of rotor sleeve, bowl neck ring of pump, pump bowl bush, pumps sleeves(SS), supply or repairing & fitting of pump shaft impeller and machining/turning i.e. lathe work of impeller etc, as required.

Supply and installation of flange packings, nuts, bolts and washers for reassembling of the delivery line of 30HP submersible pump etc as required.

Lowering/lifting down / installation of repaired/rewinded 30 HP submersible pump motor set in the existing bore well, including making connections of motors, starters, testing & commissioning of 30 HP submersible pump motor with proper fitting, alignment including labour charges, tripod & all the consumables etc as required.

Supply and fixing 63 amps. rating 240/415 volts, ‘C’ curve miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc as required:

a) Single pole

b)Single pole and neutral

c) Triple pole

d) Triple pole and neutral

Supply & fixing of 5-30 amps, 230 Volt,50Hz, single phase KWh / energy meter with LCD display, Model EM101+Class 1 Base mounting including dismantling of defective meter, consumables and connections etc as required.

GST 12 % (already included in the items rate, please do not fill GST here)

Lite Links

ROHILKHAND ELECTRICALS AND FABRICATORS

Vaish Electricals