SMART PERIODICAL SERVICES ALONG WITH CONNECTED CIVIL WORKS IN OTM / MD ACCN AND OFFICERS ACCN OF ZONE B AND C UNDER GE (CENTRAL) KIRKEE.

Amount

NOTE FOR ALL PAINITNG AND WATER PROOFING ITEMS :- The following precautionary measures shall be ensured by the contractor before and during execution of the work :- (i) All the painting works and water proofing works shall be got executed through original material manufacturing company or their authorised applicators as approved by GE and contractor should submit MOU with the manufacturing company or their authorised applicator before execution of work and entire work shall be executed with the approved firm. (ii) Contractor shall deposit entire quantity of materials (proprietory materials) in sealed containers required for painting works covered under subject contract in the custody of Engineer-In-Charge/ Office in charge of unit. (iii) The materials as required shall be issued to contractor by JE/ Engineer-In-Charge on daily basis and the empty containers/ bags shall be deposited in the store of Engineer -In-Charge by the contractor, for verification as per standard consumption/ coverage prescribed by the manufacturers. (iv) After completion of painting work contractor shall remove and clean all the droplets/stain of paint left on the floor, glasses and joinery.

Material and labour for preparation of new plaster surface on wall / ceiling / chajja by scrapping with trucare wall sander : L-01/H-01 (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and filling cracks, holes etc complete and applying two coats of cement based paint including priming with alkali resistant primer complete all as specified and as directed. NOTE :- (i) Proper curing with water to be done before and after application of first coat and second coat. (ii) Rate quoted shall be deemed to be included for scaffolding up to 15 mtr height building.

Material and labour for preparation of old plastered or unplastered surfaces of wall / ceiling and applying one coat of oil bound emulsion destemper of approved tint complete all as specified and as directed.

Material and labour for preparation of old / new plastered or unplastered surfaces of wall / ceiling and applying two coats of oil bound destemper,including priming plastered and other surfaces with alkali resistant primer complete all as specified and as directed.

Material and labour for complete removal of existing treatment and apply walll care putty of 3 mm thick as in interior / exterior wall / ceiling surfaces of any description finished smooth and even surfces complete all as specified and as directed.

Material and labour for preparation of old plastered or unplastered surfaces of wall and applying one coat of cement based paint complete all as specified and as directed. NOTE :- Rate quoted shall be deemed to be included for scaffolding up to 15 mtr height building.

Material and labour for complete removal and preparation of old decorated treatment on wall / ceiling / chajja by scrapping with trucare wall sander : L-01/H-01 (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and filling cracks, holes etc complete and applying two coats of cement based paint including priming with alkali resistant primer complete all as specified and as directed. NOTE :- (i) Proper curing with water to be done before and after application of first coat and second coat. (ii) Rate quoted shall be deemed to be included for scaffolding up to 15 mtr height building.

Material and labour for complete removal of existing treatment for preparation of old decorated treatment on wall / ceiling / chajja by scrapping with trucare wall sander : L-01/H-01 (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and filling cracks, holes etc complete and applying two coats of Anti fungal weather proof grade exterior acrylic emulsion paint of approved tint over a coat of weather proof primer with crack filling upto 5 bars of positive hydrostatic pressure on vertical walls without any dilution with forced coverage not more than 3.5 sqm / ltr as per manufacturer's instructions and all coats including primer to be applied with fully automatic airless spray machine of paint application with a flow speed of minimum 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in subsequent coats of paint complete all as specified and as directed. MAKE :- Apex Ultima Protek Asianpaints/ Nerolac excel top guard / Berger weathercoat long life 10

Material and labour for complete removal of existing treatment for preparation of old decorated treatment on wall / ceiling / chajja by scrapping with trucare wall sander : L-01/H-01 (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and filling cracks, holes etc complete and preparation of old plastered surfaces of wall and applying two coats of lustre paint over two base coat/ two coats of primer complete all as specified and as directed.

Material and labour for complete removal of existing treatment for preparation of old decorated treatment on wall / ceiling / chajja by scrapping with trucare wall sander : L-01/H-01 (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and filling cracks, holes etc complete and preparation of old plastered surfaces of wall and applying two coats of wall dampness treatment complete all as specified and as directed. MAKE :- Smart care damp proof, Advanced

Material and labour for preparation of old painted wooden surfaces of any description exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for preparation of old painted steel surfaces of any description exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for preparation of old painted plaster surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint of any tint complete all as specified and as directed.

Clearing away roots, and trees not exceeding 30 cm girth on buildings at any height including all grass vegetation, saplings, shrubs, brushwood, undergrowth, and removing rubbish upto a distance of 50 metres outside the periphery of the area under clearance except in the case of surface dressing which includes for all the foregoing except clearing away of trees complete all as specified and as directed.

Material and labour for rendering 12mm thick on fair faces of brick or concrete surfaces of wall in CM (1:6) including taking down old cement plaster complete all as specified and as directed.

Material and labour for 15mm thick cemet plalster in CM (1:4) over wall / concrete surfaces finishing the surfaces even and smooth without using extra cement,including taking down old cement plaster, complete all as specified and as directed.

Material and labour for 5mm thick rendering on concrete surface of ceiling in CM (1:3) and rendering is to be finished even and smooth without using extra cement,including taking down old cement plaster.complete all as specified and as directed.

Material and labour for water proofing treatment of external walls, chajjas and newly plaster surfaces by applying two coats of elastomeric coating material after clearing the surfaces thoroughly and sealing all cracks with acrylic sealing compound complete all as specified and as directed. MAKE :- Dr FIXIT / PIDILITE / FOSRAC /EXCOT

Material and labour for cleaning treatment of external walls of stone masonary by applying 1 coat Sagatech SC @ 2.5 litre per square metre (Stone and stone masonry cleaner) Make:-Saga polymer only (approved by trial) or equivalent after cleaning the surface throughly and sealing all the pointing with cement and sand mortar with approved water proofing additive complete all as specified and as directed.

Demoition of Cement Concrete (unreinforced) in ground floor or paving n exc. 15 cm thickness (below or above ground level or any floor level) complete all as specified and as directed.

Material and labour for 100 mm thick plain cement concrete, type D- 2, (1:4:8), using 40mm graded stone aggregate complete all as specified and as directed.

Material and labour for 25 mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in sub base for levelling etc complete all as specified and as directed.

Material and labour non-skid coloured digital ceramic tiles 300x300 / 400x400 mm 7 to 8 mm thick as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6), including dismantling floor hearth or wall tilling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. MAKE :- Somany (Glosstra series Naos Grey Dark design) or techno commercially equivalent make in Kajaria, Johnsons and RAK ceramics

Material and labour non-skid coloured digital ceramic tiles size of tiles 450x350 / 300x200 / 300x600x5 to 6mm thick on vertical surface such as in skirting/dado etc over and including 10 mm thick cement plaster in CM (1:4), including dismantling floor hearth or wall tilling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. MAKE :- Somany (Vistoso or Glosstra series Revel HL 01 or Elogia HL 01 Design) or techno commercially equivalent make in Kajaria, Johnsons and RAK ceramics

Material and labour Glazed vitrified tiles 600x600 / 600x1200 mm 7 to 8 mm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick screed bed in cement mortar (1:4) including dismantling complete all as specified and as directed. MAKE :- Somany (Duragres series Grande vegas Gold FP design) or techno commercially equivalent make in Kajaria, Johnsons and RAK ceramics.

Supply and fix 1200x600mm glazed vitrified wall tiles 10mm thick in skirting or dadoes etc, set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces complete over and including 10mm thick rendering in CM (1:4) including dismantling floor hearth or wall tilling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. MAKE :- Somany (Duragres series Grande vegas Gold FP design) or techno commercially equivalent make in Kajaria, Johnsons and RAK ceramics.

Supply and fix vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including PVC(SWR) 'P' or 'S' trap connecting to flush pipe and to anti syphonage pipe,all as per CERA Cat No CALINA S 3010102 or techno commercially equivalent makes specified in PS. complete including making good to floor fixed in repairs complete all as specified and as directed.

Supply and fix Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) all as per CERA Cat No CURTIS or techno commercially equivalent makes specified in PS fixed as in repairs complete all as specified and as directed.

Supply and fix in repairs PVC valveless, syphonic action type, flushing cistern, 10ltr capacity,low level, white, with inlet, ball valve, float and handle including brackets, connections to pipes and fixing of chain and pull, or lever, all as per ESSCO Cat No. WHE-WHT-183NL or techno commercially equivalent makes specified in PS fixed in repairs complete all as specified and as directed.

Supply and fix in repairs Vitreous china wash basin white flat back size 580x450 mm excluding taps but including 32 mm dia CP waste fitting and PVC waste pipe 610 mm long and brackets all as per CERA Cat No S 2040109 or techno commercially equivalent makes specified in PS complete fixed in repairs all as specified and directed.

Supply and fix in repairs 15 mm bore dia steel water tubing, medium grade galvanised with and including all medium grade fittings fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Supply and fix Rotational moulded three layered polythene water storage tank (cylindrical vertical with closed top) with ISI mark embosed on it, hoisted and fixed in position complete all as specified in SSR part I capacity of tank 1000 ltrs complete fixed in repairs all as specified and as directed. MAKE:- Sintex /Polycon / Plasto / Kaveri

Supply and fix Rotational moulded three layered polythene water storage tank (cylindrical vertical with closed top) with ISI mark embosed on it, hoisted and fixed in position complete all as specified in SSR part I capacity of tank 500 ltrs complete fixed in repairs all as specified and as directed. MAKE:- Sintex /Polycon / Plasto / Kaveri

Material and labour for plain cement concrete (1:3:6) type C-2 using 20 mm graded stone aggregate as in floors, plinth protection, 75 mm thick, surfaces finished even and fair without using extra cement including provision of construction joints complete all as specified and as directed.

Supply and fix in repair,110 mm PVC (SWR) pipes single socketed, type 'B' in any length with rubber ring joints, including T, bend, Y, etc laid in trenches or in floors complete all as specified and as directed.

Supply and fix in repairs PVC floor trap, square type with CP grating with or without hole including provision of jointing to waste pipes in run lead joint, dia of outlet 75 mm complete all as specified and as directed.

Supply and fix Bib taps 15mm dia, cast copper alloy chromium plated, with CP flange all as per Prayag Cat No 7306 Tranquil series or techno commercially equivalent makes specified in PS fixed in repairs complete all as specified and as directed.

Supply and fix Stop valve cast copper alloy screwed down, high pressure with crutch or butterfly handle,15mm bore size screwed both ends for iron pipe or for unions and fittings all as per Prayag Cat No 7326 or techno commercially equivalent makes specified in PS fixed in repairs complete all as specified and as directed.

Supply and fix PVC connections 15 mm size with PTMT nut of length 450 mm fixed in repairs complete all as specified and as directed.

Supply and fix in repairs 32 mm bore PVC waste pipe of approved make suitable for WHB, sink,urinals etc complete all as specified and as directed.

Supply and fix in repairs Soap dish any type, fixed to plugs with chromium plated brass screws omplete all as specified and as directed. (Cat Part No BA-45 of Prayag or equivalent makes specified in PS)

Supply and fix in repairs all as per Cera cat No. Faucet Model-F 8030105AB (ABS),with 1 meter SS braided connection pipe complete all as specified and as directed.

Supply and fix plastic water closet seat cover, coloured, for pedestal pan closed pattern with flat bottom, and cover with mild steel chromimium plated or aluminised hinging device fixed in repairs complete all as specified and as directed.

Supply and fix in repairs elegant mirror cabinet with shelf with PP & PPCP material of size 540x340x130mm all As per all as per Prayag Cat No.667 or technocommercially equivalent make specified in PS and complete all as specified and as directed.

Supply and fix in repairs for towel rail 600mm long of PTMT fixed with screws and wooden/plastic cleats (Minimum weight 190gms) (MAKE-Prayag Cat no. 200 or technocommercially equivalent makes specified in PS ) complete all as specified and as directed.

Supply and fix tooth brush holder/ tumbler brass CP for putting bathroom utilies all as per (MAKE- CERA Cat Part No CA 104 or equivalent in MARC, JAQUAR) complete all as specified and directed .

SandF sheet glass shelf assembly of size 500 x125mm with chromium plated brass bracket all as per Prayag cat No. BEA-45 or techno commercially equivalent makes specified in PS complete all as specified and as directed .

Supply and fix of CP jet spray fitting to EWC or wall with screws and including two way CP stop cock 15mm dia complete all as specified and directed .

Supply and fix in repairs wall mixture three in one with complete accessories MAKE : - Hindware, CERA, ESSCO complete all as specified and as directed .

Supply and fix in repairs toilet paper holder of fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed .

Supply and fix in repair towel ring of CP fixed with and including CP brass screws and wooden / plastic cleats (min wt 90 gms) for kitchen complete all as specified and as directed.

Supply and fix in repair Harrison rails, of anodised aluminium alloy with fixing brackets, stops, rollers etc complete all as specified and as directed .

Supply and fix in repairs pillar taps, 15mm dia, long body/swan neck, fancy type suitable for fixing to wash basin screwed for iron pipe and fixed with necessary fittings and including PVC connection all as per CERA Cat Part No F2004301 or techno commercially equivalent makes specified in PS complete all as specified and as directed.

Disconnecting existing tanks n exc 500 litre capacity, setting aside ( or lowering if required ) for repairs, cleaning, etc. and hoisting if required reconnecting and refixing in position as same complete all as specified and as directed .

Supply and fix in repair Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and as directed .

Supply and fix in repairs cast copper alloy chromium plated shower rose fancy type fixed to 15 mm bore pipe complete all as specified and as directed .

Supply and fix in repairs covers for PVC tanks any make and for capacity upto 500 ltr with screws incl locking device complete all as specified and as directed .

Supply and fix in repairs 100 mm Cast iron Nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

Supply and fix in repairs plain fillets. square, rectangular in section exc 13 sq.cm but n.exc. 25 sq.cm, second class hardwood, clean sawn, secured with nails or brads in door frame, cupboard frame, kitchen cabinet frame etc complete all as specified and as directed.

Supply and fix 18/19 mm thick exterior grade prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work, including,dismantling and all necessary fittings as in cupboard shutters,kitchen cabinet shutters complete all as specified and as directed .

Resecuring or easing and adjusting without taking down of shutters of any description area exc. 1 sq. m and n.exc. 2 sq.mm each complete all as specified and as directed.

Supply and fix in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm fixed with tinned tack of stainless steel wire staple or wooden beads as in door, windows / ventilators etc complete all as specified and as directed.

Supply and fix in repairs 3 mm thick sheet glass ordinary quality, in squares n.exc. 0.5 sq. m each pane with putty/ beads including removing loose or decayed putty/ beads and hacking out old glass in metal frame etc complete all as specified and as directed .

MAHESH DADAJI BACHHAV

S M MISHRA

SAMBHAJI D JARANDE

S.R.M.K Enterprises

Shri Sant Cosntruction

ANIL CONSTRUCTION CO.