Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.5 LAccepted-AOC | L1 | Accepted-AOC Being L1 bidder | |
| 2 | L2₹36.6 L+₹67,246 (1.87%)Rejected-Finance | L2 | Rejected-Finance Being other than L1 bidder | |
| 3 | L3₹36.8 L+₹84,758 (2.36%)Rejected-Finance | L3 | Rejected-Finance Being other than L1 bidder | |
| 4 | L4₹37.4 L+₹1.5 L (4.07%)Rejected-Finance | L4 | Rejected-Finance Being other than L1 bidder | |
| 5 | L4₹37.8 L+₹1.9 L (5.17%)Rejected-Finance 0 MANPUR CHITBARAGAON CHITBARAGAON BALLIA UTTAR PRADESH 221713 | BALLIA | UTTAR PRADESH | 221713 | L4 | Rejected-Finance Being other than L1 bidder |
Tender Value
₹50.0 L
EMD Value
₹99,980
Closing Date
17 May 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 862 EWS
GE 862 EWS Rajouri
REPAIR REPLACEMENT OF INTERLOCKING CHEQUERED TILES AND CERTAIN MISC ITEMS IN ZONE A UNDER AOR OF AGE BR DETT B OF GE 862 EWS
2024_MES_650352_1
GER-02/2024-25
Open Tender
Civil Works
Item Rate
180 days
GE 862 EWS Rajouri
As per tender documents
9 documents required · 9 mandatory
₹500
GE 862 EWS
₹99,980
Yes
3 Jun 2024
18 Apr 2024
20 May 2024
18 Apr 2024
17 May 2024
4 May 2024
18 Apr 2024 - 28 Apr 2024
Amount
Demolition of cement concrete (unreinforced) in ground floor and paving n exc 15 cm thickness below or above the ground level, complete all as specified and directed.
M&L for 100mm thick plain cement concrete 1:2:4, type B-2 using 40mm graded crushed stone aggregates as in hard standing and footpath, complete all as specified and directed.
M&L for 75mm plain cement concrete 1:4:8, type D-2 (using 40mm graded crushed stone aggregates) as in sub base for tiling, complete all as specified and directed.
M&L for coloured chequered cement concrete tiles of size 30 cm x 30cm x 25 mm thick set, jointed in neat cement slurry in floor and pointed in white or coloured (apporved by GE) cement to match the shade of tiles laid over and including 20 mm thick screed bed in cement mortar 1:6 after dismantling of old unserviceable tiles etc and removing rubbish off the premises complete all as specified and as directed.
M&L for machine pressed precast concrete interlocking paver block of any shape and size approved by Engr-in-Charge confirming to (IS:15658-2006) of 60mm thick, M-35 grade single layer monolithic high density manufactured by electro vibro hydraulically operated block making machine in equal propotion of grey and coloured tile to make a pattern as directed as in hardstanding,with grey cement, laid tightly over & including 25mm thick dry sand cushion (compacted) and joints filled with dry sand, colour and pattern as approved by GE, including dismantling of old paver block complete all as specified and directed.
M&L for machine pressed precast concrete interlocking paver block of any shape and size approved by Engr-in-Charge confirming to (IS:15658-2006) of 80mm thick, M-40 grade (Heavy Traffic), single layer monolithic high density manufactured by electro vibro hydraulically operated block making machine in equal propotion of grey and coloured tile to make a pattern, as in hardstanding, with grey cement, laid tightly over & including 25mm thick dry sand cushion (compacted) and joints filled with dry sand, colour and pattern as approved by GE, including dismantling of old paver block complete all as specified and directed.
M&L for digital vetrified exterior parking tile 300 x 300mm and 12 mm thick of any colour pattern (colour approved by GE) as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to matched, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, laid over and including 15 mm thick screed bed in cement mortar 1:4 after dismantling old unserviceable of tiles, including removing rubbish off the premises complete all as specified and directed.
M&L for 20mm thick black or any other colour granite (of any type) work (table rubbed and polished) in floors, steps, Jambs, pillars, window cills, cooking platforms and like including back coat of cement plaster or screed bed with standard specification as per site requirement, set and pointed in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite after dismantling of old unserviceable granite stone slab of any size, complete all as specified and directed.
M&L for machine cut kota stone slab (mirror polished) flooring 20mm thick in floors and jointed with grey cement slurry mixed with pigment to match the shade of the slab including machine cutting to make it square or rectangular, rubbing and cutting and polishing to achieve mirror finish, laid over and including screed bed or bedding layer of 20 mm thick in cement mortar 1:4 after dismantling of old unserviceable tiles / kota stone, complete all as specified and directed.
M&L for machine cut kota stone slab (mirror polished) as in skirting and dado including back coat of 10mm thick in cement mortar 1:4 etc, including takingdown and dismantling of old plaster/ existing skirting, complete all as specified and directed.
M&L for 20mm thick machine cut white marble stone slab or any colour in floors steps, jambs, pillars, window cills, cooking platforms and like includig back coat of cement plaster or screed bed with standard specificaion as per site requirement, set and pointed in white cement(1:2) usig marble dust with admixture of pigment to match with shade of marble including dismantling old marble, complete all as specified and directed.
M&L for 12mm thick Heavy duty outdoor vitrified tiles of 600 x 600mm as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to matched, the surface, laid over and including 15 mm thick screed bed in cement mortar 1:4 after dismantling of old unserviceable tiles, complete all as specified and directed.
Demolition of reinforced cement concrete in ground floor and paving n exc 15 cm thickness below or above the ground level complete all as specified and directed.
M&L for precast reinforced cement concrete 1:2:4, type B-1 (using 20mm grade crushed stone aggreagte) as in landing, cover slab, manhole cover, chajjas etc and similar articles with plain faces, set in cement mortar 1:6, complete all as specified and directed.
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified and directed.
M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6, complete all as specified and directed.
Description all as per item No. 17 above but except bricks NOTE: Old brick retrieved from demolition shall be used.
M&L for plain cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) as in quoin blocks, strings courses, copings, kneelers, apex stone, bed plated, bed blocck foe embedding hold fasts, surface channel, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work as required, complete all as specified and directed.
Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick or concrete work, finished the surface even and smooth without using extra cement, complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls including cornices etc and applying two coats of exterior emulsion weather proof paint of apex ultima of any approved two or more colour pattern (as approved by GE) over and including a coat of primer, complete all as specified and directed.
M&L for complete removal of existing treament of wall surfaces including cornices etc and applying two coats of exterior emulsion weather proof paint of apex ultima of any approved two or more colour pattern (as approved by GE) over and including a coat of primer after preparation of surface, complete all as specified and directed.
Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground as post embedded in concrete, brick work, masonry work etc,complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm and removing surplus soil to a distance n exc 50m and making good surface in any type of soil, complete all as specified and directed.
M&L for plain cement concrete 1:4:8, type D-2 (using 40mm graded crushed stone aggregates) as in fondation, filling and mass concrete, complete all as specified and directed.
S&F for mild steel work as in posts or struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to Fe-290 Gde E-165, embedding in concrete, complete all as specified and directed. Note :- (i) Size of angle shall be as per standard drgs. (ii) Earth work and concrete shall measured & paid for separately under respective items of this BOQ.
M&L for preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S&F of 2mm thick fibre reinforced polymer sheet having tensile strength of 550 Mpa as in roof or wall cladding or view cutter of approved colour fixed with self tapping screws including dismantling of old sheet complete all as specified and directed by Engr-in-Charge.
M&L for providing and fixing stainless steel (Grade 316) gate, railing made of hollow tubes, channels, plates, solid bars, SS chain etc, including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless stell nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasterners, stainless steel bolts etc, of required size, on the top of floor or the side of waist slab with suitable arrangement including dismantling old iron/ steel members, complete all as specified and directed. (i) Design and size of all members shall be approved by GE.
SATVIR GUPTA ENGINEER and CONTRACTOR
M/s Liaqat Hussain Construction Company
KANWAL KUMAR GUPTA
NATIONAL TRADING COMPANY
SUBASH CHANDER
VIKAS ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .