REPAIRS TO ROADS AND SIDE BERMS IN WSA AND REPAIRS/RESURFACING OF BITUMINOUS ROADS AND SIDE BERMS IN TECH AREA AT AF STN SURATGARH.

Amount

Demolition of cement concrete unreinforced of any description n exc 15cm thickness below or above ground level etc all as specified and as directed.

Material and Labour for Cement Concrete 1:2:4 (20mm graded stone aggregate), 75mm thick in Path/ Hardstanding in alternate Bay/Panel, finishing Cement Concrete Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed.

Material and Labour for Repair to pot holes any depth, not exc 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths etc cutting around the edges to at least 25 mm in depth, making good by applying tack coat @ 5Kg per 10 Sqm using VG-10 grade, bitumen putting in premixed bituminous macadam using paving bitumen, well rammed and sealed with binder 9.8 kg per 10 Sqm, blinded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chipping) depth of pot holes exc 30mm ,complete all as specified and as directed.

Material and Labour for premix bituminuous macadam from hot mix plant with 4 % binder content by weight of total mix using paving bitumen of grade VG-30 laid with mechnical paver, rolled and compacted with power road roller of 8 to 12 ton capacity to required gradient and camber (consolidated thickness 75mm or less) ,omplete all as specfied and as directed.

Material and Labour for Preparing surface by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with gunny bags or using air compressor to remove all loose dirt etc and applying evenly a tack coat using paving bitumen VG-10 grade at the rate of 5 Kg per 10 Sqm on existing black top surfaces and providing bituminious premix asphaltic semi dense concrete (design mix) 30 mm (consolidated thickness) with 5.5% binder content by weight of total mix, rolled and compacted to required camber and gradient complete using paving bitumen VG-30 complete all as specified and as directed.

Material and Labour for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

Dismantling of road stud,dealineator of any type, any size from bituminous road before road carpeting work, all as specified and directed

Supply and Fixing of solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed.

Supply and Fixing of cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions.,complete all as specified and directed by engineer in charge.

Supply and Fixing in repair speed bump 500 mmX365 mm X 50mm height made of Sturdy plastic, pre-coloured (Black/yellow) and UV stabilisers studded with reflecftors on either side and installing by cleaning the surface,grouting the holes and applying epoxy adhesive on the road surface and bumps,placing the bumps on the fixing area and hammer the nails provided with the bump,including removal of existing damaged bumps of any description complete all as specified and as directed.

Supply and Fixing in repair Convex Mirror 900mm dia having clear and definitive Mirror Image with 130 degree of viewing angle,provided with and including 50X50X4.0 mm mild steel pipe square tube post of length 1.75 m with necessary bolts,nuts,base plate etc. and welding as required for fixing including applying two coats of synthetic enamel paint over a coat of Red oxide Zinc Chrome primer,complete all as specified and as directed.

Supply and fixing of metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermoplastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed Note-: The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender from total amount of Schedule 'A'/ BOQ

SHREE GURU NANAK CONSTRUCTION COMPANY (BID ID -3483332)

M/S AAYUSH ENGINEERING&COMPANY (BID ID -3482904)

Ankit Jindal And Company (BID ID -3482648)

bansal construction company (BID ID -3488631)