REPAIRS TO ROOF, FALSE CEILING, TILING, STEEL GATES AND CERTAIN B/R WORK IN DSC LINE RA AT CAD PULGAON

Amount

Dismantling of Asbestos cement (corrugated, semi corrugated etc) sheets in roof covering complete all as specified and as directed by EIC.

M&L for 6 mm thick asbestos cement corrugated sheet in roofs, walls, etc fixed with L type or J type or cranked hook bolts all as specified and as directed.

S & F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.

S & F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Dismantling of timber scantlings 40 sq cm and over in section in any position, unframed work complete all as specified and as directed by EIC.

S&F structural steel work conforming to Fe-290 Gde E-165, as in angle or simmilar work for roof trusses (framed), purlins, crane gantries, rails and fastenings, heavy brackets framing (Beam, tee, angle, channel or flat section) including distance pieces, cleats etc complete all as specified and as directed by EIC..

M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregates) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed by EIC.

M&L for preparing new or previously untreated surfaces, of steel and iron work of any description not otherwise described exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Demolition of brick /stone masonary built in cement mortar including all quoins arches, pillars and precast concrete articles all as specified and as directed.

M&L for old size brick work with flyash bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 using Modulars bricks complete all as directed by EIC.

M&L for old size brick work with flyash bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as directed by EIC

Dismantling ceiling boards/insulation boards as in ceiling of any description or size including cover fillets.

M&L for 8 mm thick designer ceiling board (Make : Everest or equivalent as approved by GE) in ceiling fixed with screw as per manufactures instructions, fixed with white powder coated galvanized iron grid with 24mm wide T-section exposed flanges comprising of main runner made from 0.33mm thick galvanized steel sheet & of size T 24x32mm and spaced at 1.2m c/c securely fixed to the structural soffits by hangers at 1.2m of GI wire 4mm dia fixed to pipe or wall plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall flush fitting of 1200mm long cross tee with (double stitching) to be inter locked between main runners at 600mm c/c to form 600x600mm modules, angle along perimeter wall shall be of 0.45mm thick galvanized steel of size 19x19mm of white colour all as per instruction complete all as specified & directed.

Taking down cement plaster/terrazzo finish on wall of any description hacking for key scrubbing down with water including racking out joints complete all as specified & directed.

Material and labour for rendering 15 mm thick in CM 1:6 on fair faces of the brick masonry surfaces and finished even and smooth without using extra cement complete all as specified and directed by EIC.

M&L for rendering 10 mm thick in CM 1:4 on fair face of brick work surface to be finished even and smooth without using extra cement.

M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified & directed.

M&L for preparation of newly plastered surface of wall and applying two coats of cement base paint over a coat of white cement primer complete all as specified & directed.

M & L for preparation of new plastered surface applying 3 coats of white wash On wall complete all as specified & directed.

Washing, rubbing down and stopping of old preparation of old distempered surfaces of walls including cornices plaster and applying one coat of oil bound distemper on walls complete all as specified & directed.

M & L for apply 3mm thick wall care putty over on plastered surfaces for even & smooth finishing all as specified and directed by EIC.

M & L for washing, rubbing down and stopping of old cement base paint surfaces of walls incl cornics, pillastar and applying one coat of cement base paint on wall complete all as specified & directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-charge.

M&L for non skid coloured ceramic tiles Square/rectangular area of each tiles exceeding 0.11sqm but not exceeding 0.18 sqm, 7 to 8mm thick.in floors over 15mm thick cement screed bed in cm 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed by Engineer-in-charge.

M&L for glazed coloured ceramic tiles 350x250x7/450x300x7mm thick as in vertical surfaces etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 cm thick rendering in cm 1:4 complete all as specified and directed by Engineer-in-charge.

M & L for Non skid ceramic coloured tiles (square / rectangular) of 7 to 8mm thick, area of each tile exceeding 0.06 sqm but not exc. 0.11sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over 15 mm thick screed bed (1:6) CM complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n.exc 15cm thick (below or above GL) complete all as specified and directed by Engineer-in-charge.

M&L for 75 mm thick PCC 1:4:8,type D-2(using 40mm graded stone aggregate) as in sub base to floor complete all as specified and directed by Engineer-in-charge.

M/L for 75mm thick PCC 1:3:6 type C1 ( using 20mm graded stone aggregates) as in plinth protection finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-charge.

M&L for 40 mm thick PCC 1:2:4 type B1(using 20mm graded aggregate) as in flooring finished even and smooth with using extra cement, complete all as specified and directed by Engineer-in-charge.

Taking down chowkats or frames with shutters (without taking off shutters) of any description exc 1.50 Sqm but n.exc 4 Sqm each all complete all as specified and directed by Engineer-in-charge.

Taking down chowkats or frames with shutters (without taking off shutters) of any description not exc 1.50 Sqm each complete all as specified and directed by Engineer-in-charge.

Supply & Fixing IInd class hard wood(Sal wood ) plain solid straight chowkats and frames wrought, framed, rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed by Engineer-in-charge.

Supply & Fixing 35 mm thick II class hard wood (door) plain framed factory made panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on the both faces. The size of rail as per IS: 1003 (Pt I) kiln seasoned and chemically pressure treated complete all as specified and directed by Engineer-in-charge..

Supply & Fixing 35 mm thick factory made glazed and skeleton shutter of 2nd class HW, open rebated and prepared to receive glass/gauze, divided into squares with plain chamfered mitred and rebated without sash bar as in doors, sizes of members of shutters as specified in SSR Pt-I, section 8, clause 8.24(a) supplied and fitted to chowkats complete all as specified & directed by EIC.

Supply & Fixing 30 mm thick factory made glazed skeleton shutter of 2nd class HW, open rebated and prepared to receive glass/gauze, divided into squares with plain chamfered mitred and rebated sash bar as in window/ventilator, sizes of members of shutters as specified in SSR Pt-I, section 8, clause 8.24(b) supplied and fitted to chowkats complete all as specified & directed by EIC.

S&F Solid PVC door frame of size 50mmx47mm made out of 5 mm plain coloured PVC sheet reinforced with MS square tube in opening complete all as specified and directed by Engineer-in-charge.

S&F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed by Engineer-in-charge.. (Make : Rajshree plastiwood).

Supply and fix 4 mm thick sheet glass ordinary quality and fixed inside aluminium/wooden frame n. exc. 0.5 sqm in each pane complete all as specified and directed by Engineer-in-charge.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or stainless steel wire staples or with second class hard wood beadings complete all as specified and directed by Engineer-in-charge. .

S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or stainless steel wire staples or with second class hard wood beadings complete all as specified and directed by Engineer-in-charge.. .

Supply & Fixing 100mm long cold rolled, mild steel butt hinges medium weight complete all as specified and directed by EIC.

Supply & Fixing 75mm long cold rolled, mild steel butt hinges medium weight complete all as specified and directed by EIC.

Supply & Fixing 200mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed by EIC.

Supply & Fixing 150mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed by EIC.

Supply & Fixing 150 mm long extruded aluminium alloy handle fabricated type anodised complete all as specified and directed by EIC.

All as per item No 46 hereinbefore but 100 mm long

Supply & Fixing 300 mm aluminium alloy anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section etc complete all as specified and directed by EIC.

M & L for Preparation of new or previously untreated surfaces of wood work of any description over 10 cm in width/girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-charge..

S&F in repair 10 ltrs PVC valveless, syphonic action type flushing cistern, low level,white with inlet ball valve, float and handle including brackets and connection to flush pipe and fixing of chain and pull or lever, if any complete all as specified.

Supply only flush pipe of polyethylene of low or high density or PVC 32mm dia for low level cistern complete all as specified and directed by Engineer-in-charge.

S&F in repair 15 mm bore stop valve cast copper alloy screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes complete all as specified and directed by Engineer-in-charge.

S&F in repairs fancy type Bib taps, cast copper alloy 15mm dia with capston head handle, screwed down, screwed for iron pipe complete all as specified and directed by Engineer-in-charge.

S&F in repair chromium plated brass towel rail 20 mm dia 'D' type incluidng fixing with screws to wall 60 cm long all as specified.

S & F 20mm bore gun metal gate valves, with iron wheel head , screwed both ends for iron pipes complete all as specified and directed by Engineer-in-charge.

Taking up or down steel tubing and connections including cleaning for refixing or removal to store, bore of pipe 15 mm dia complete all as specified and directed by EIC.

All as per item 56---- but 20 mm bore GI tubing complete all as specified and directed by EIC.

S&F 15 mm GI tubing, medium grade, with all fitting and fixed complete to wall or laid in floor complete all as specified and directed by EIC.

All as per item 58-- above but 20 mm bore of pipe complete all as specified and directed by EIC.

Refixing old steel tubing and connection new or old position on wall or under floor 15 mm bore of pipe complete all as specified and directed by EIC.

----Ditto---- all as per item 60 above but bore of pipe 20 mm complete all as specified and directed by EIC.

Dismantling water tank exc 250 but not exc 500 ltr capacity complete all as specified and directed by EIC.

S & F PVC triple layered white coloured water tank rotational moulded polythylone water storage tank (cylindrical vertical with closed lid hoisted and fixed in position) 500 ltrs capacity complete all as specified and directed by EIC.

S & F in repair vitreous china squatting pans orissa pattern size 580x440 mm white with integral foot rests including provision of cement, concrete, bedding incl re-fixing flushing cistern and flush pipe complete all as specified and directed by EIC.

S & F in repair ball brass valve, high pressure, with polythene float and flynuts complete, screwed for ron pipes of brass ferrules for 20mm bore of pipes complete all as specified and directed by EIC.

S & F ball brass valve, high pressure, with polythene float and flynuts complete, screwed for ron pipes of brass ferrules for 20mm bore of pipes complete all as specified and directed by EIC.

S&F in repair pillar taps 15mm bore dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or Cold' with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed by Engineer-in-charge.

S&F in repairs Chromium plated brass shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed by Engineer-in-charge.

S&F PVC connections 15 mm size with PTMT nuts of length 450mm complete all as specified and directed by Engineer-in-charge.

S&F in repairs Vitreous china wash basin, white , flat back , size 550 x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed by Engineer-in-charge.

S & F in repairs curtain rod rail 20mm dia aluminium anodised complete all as specified and directed by Engineer-in-charge.

S& F aluminium anodised bracket for curtain rod complete all as specified and directed by Engineer-in-charge.

Dismantling of structural steel work including doors, gates but excluding framed trusses complete all as specified and directed.

S & F 1mm mild steel, plain, black sheet in covering to door shut ters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required complete all as specified and as directed.

M & L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete.

RAJ ENTERPRISES

M/s MM TRADERS

M/s VILAS RATAN MENDHE

M/s Chandak Constructions, Pulgaon

M/S L M Chourasia

M/s JAYPEE ENTERPRISES

Attar Singh and Sons

Bidder Name

Attar Singh and Sons

M/S L M Chourasia

RAJ ENTERPRISES

M/s VILAS RATAN MENDHE

M/s Chandak Constructions, Pulgaon

M/s Dara Constructions, Pulgaon

M/s JAYPEE ENTERPRISES

M/s MM TRADERS