Provn of Toilet with 12 x WC and 04 x Bathroom for DSC PL at ASD (FAD) under GE (East) Ferozepur Cantt

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft and loose soil, complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation/ laying of cable, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil, complete all as specified and direced by Engr-in-Charge.

M&L for PCC type D2, 1:4:8 (40 mm graded aggregate) as in foundations, filling and mass concrete, complete all as specified and directed by Engr-in-Charge.

Returing, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soill, complete all as directed by Engr-in-Charge.

Removing excavated material as soil n.exc. 50 m and depositing where directed at a level n.exc. 1.5m above the starting point, complete all as specified and directed.

M&L for form work to sides of concrete foundations, footings, bases of columns and plinth beams and similar work, complete all as specified and directed by Engr-in-Charge.

M&L for RCC (1: 1.5 :3) type B1, (20 mm graded aggregate) as in Foundations, footings, foundation beams; plinth beams; bases for columns, etc. complete all as specified and directed by Engr-in-Charge.

M&L for form work to sides of columns, square, rectangular, complete all as specified and directed by Engr-in-Charge.

M&L for RCC , (1: 1.5 :3 )type B1(20 mm graded aggregate) as in column etc. complete all as specified and directed by Engr-in-Charge.

M&L for form work to sides and soffits fo roof beams, lintel beams etc. including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed by Engr-in-Charge.

M&L for RCC , (1: 1.5 :3)type B1 (20 mm graded aggregate) as in lintel beams, roof beams, cantilevers etc. complete all as specified and directed by Engr-in-Charge.

M&L for form work to chajjas, including edges, complete all as specified and directed by Engr-in-Charge.

M&L for RCC, (1: 1.5 :3 ) type B1 (20 mm graded aggregate) as in chajjas etc.complete all as specified and directed by Engr-in-Charge.

Formwork to soffit of suspended slabs such as roof slabs floor slabs, landings and similar works not exc 200 mm thick (Horizontal or sloping). complete all as specified and directed by Engr-in charge.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide. complete all as specified and directed by Engg-in charge.

M&L for RCC , (1:1.5 :3) type B1 (20 mm graded aggregate) as in slab supported on walls, beams and columns in roofs etc. complete all as specified and directed by Engr-in-Charge.

M&L for brick work with sub class `B' bricks, straight or curved on plain exc 6 mm mean radius, built in CM 1:6 complete all as specified and directed.

M&L for brick work with sub class `B' bricks, straight or curved on plain to any radious in half brick thick wall built in CM 1:4 complete all as specified and directed.

M&L 10 mm thick screed bed or bedding layer of mortar in CM(1:4) with water proofing compound @3% by weight of cement or as per manufacturer instructions will be on surface to have a smooth surface for laying of water proofing membrane. complete all as specified and directed Note: WPC shall be measured and paid separately)

Supply only integral waterproofing compound complete all as specified and directed.

M&L for Polymer modified bituminous membrane with sand witched polythene film/non woven polyster reinforcement /polymeric water proofing membrane weighing minimum 3Kg/sqm ( make : IWL/STP/ HYPERPLAST) laid after Applying bituminous primer @ 0.40 litre per Sqm over plastered surfaces of roof including parapet surfaces. (i.e roof slab cleaned throughly to remove all loose particle dust/dirt particle ) membrane shall be laid over entire roof surface and on verticle surface up to grooves ( or as per manufacturers recommendation) with over laps of 100mm The over lap shall be sealed by flames or as per manufacturer instruction.Hot blown bitumen grade 85/25 @1.2kg/Sqm applied over the membrane should be compatible with membrane all as recommendation manufacturers and all as specified and directed.

M&L for prepration of roof surface and applying two coat of solar reflective bituminous aluminium paint @0.10 Kg/Sqm over bituminious membrane complete all as specified and directed by Engr-in-Charge.

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and directed by Engr-in-charge.

S & F mild steel TMT bars 6mm to 8mm dia and over cut to length, bent to shape required including cranking, bending spirally or hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc. complete all as specified and directed.

Ditto as per item no. 24 but 5mm dia and over upto and including 10mm dia in stirrups spacers and binders complete all as specified and directed

M&L for external plastering 15mm thick in cm 1:4 on fair faces of brick or concrete, .mixed with water proofing compound, surfaces finished even and fair complete all as specified and directed by Engineer-in-Charge

M&L for internal plastering 10mm thick in cm 1:6 on fair faces of brick or concrete,surfaces finished even and smooth without using extra cement. complete all as specified and directed.

M&L 5mm thick in CM(1:3)cement plastering to ceiling on concrete surfaces finished even and smooth without using extra cement all as specifed and directed.

M&L for preparation of new plastered surfaces wall and applying two coats of white wash complete all as specified. complete all as specified and directed.

White wash in three coats on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed.

Preparation of new plastered surfaces and applying two coats of cement base paint over a coat of chalk whitining complete all as specified and directed.

Preparation of steel priming surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat red oxide complete all as specified and directed.

Preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F Pressed steel frames made of 1.25 mm thick MS sheet of profile 125 mm X 60 mm for door and window frames with one or more rebates including lock strike plate, shock absorber, 20 mm dia 60 mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and directed.

S&F 35mm thick, 2nd class hard wood plain framed, panelled shutters, any number of panels, with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers and all as specified and dirtected.

S&F Factory made box type steel window with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded & including 6 mm mild steel guard bars and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.

S&F Factory made box type steel ventilator side/top hung with glazing bars dovetailed or welded and with steel vetiletor frames with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.

S&F Solid PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified and directed in clause 8B.3.1 and shown on page 150 of MES Schedule Part-II (2004).

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2004) complete all as specified and directed.

S&F PTMT tower bolts, 150 mm long and fixed with steel screws complete all as specified and directed.

S&F PTMT butt hinge, 100mm long, fixed with steel screws with brass/bronze hinge pin complete all as specified and directed.

S&F PTMT handle 125mm long fixed with steel screws complete all as specified and directed.

S&F Extruded Aluminium alloy tower bolt of 200mm length of bolt and fixed with screws, complete all as specified and directed.

S&F 150mm size, extruded aluminium alloy handles, fabricated type, anodized and fixed with screws complete all as specified and directed.

S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F 150 mm Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring complete all as specified and as directed.

S&F galvanised steel water tubes 15 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed by Engr-in-Charge.

Supply and fix Galvanised iron steel tubing medium grade of size 20mm complete including cutting of existing pipe line for jointing with all fittings such as bend, tee, reducer, elbow and union of require size including fastners, bolts, washers,laid on wall and making good to the disturbed surface after making hole,complete all as specified and directed.

S&F 500 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs including fittings & dismantling existing water storage tank, complete all as specified and directed.

S&F 20mm bore brass ball valve high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed.

S&F PVC Connection pipe (LDPE) of pressure rating 6 Kg per Sq.cm, 450mm long, heavy duty with two sets of brass nuts & washers (one at each end)etc suitable for 15mm bore of pipe complete all as specified and directed.

S&F Soap dish of PTMT fixed to wall with steel screws and PVC rawl plug complete all as specified and directed.

S&F Vitreous china white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 110 mm bore PVC (SWR) 'P’ trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints,complete all as specified and directed.

S&F Vitreous china white wash down water closet including PVC sheet cover and connection to drain or out going pipe and to flushing pipe anti-syphonage pipe etc, fixed as in repair, complete all as specified and directed.

PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc complete all as specified and directed.

S&F Wash hand basin, flat back 550x400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, PVC waste pipe, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipe of pressure not less than 4 Kg/Sqcm in single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. (Make : Prince, Kissan, vitus)

S&F 110mm bore, PVC (SWR) bends any radius complete all as specified and directed.

S&F 110mm bore, PVC (SWR) branch piece, single (single T) equal or unequal with access door complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

S&F 75mm bore, PVC (SWR) bends any radius complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F 20 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed

S&F bib taps 15mm bore, cast copper alloy with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule fancy type chromimium plated. complete all as specified and directed

S&F 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified and directed.

S&F 15mm stop valve/Angle Cock cast copper alloy with crutch or butterflty handle, screwed down for iron pipe or brass ferrule fancy type chromium plated with long shank and cup complete all as specified and directed.

S&F for Health Faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25mm long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed

S&F towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden/ plastic cleats (Min wt 190 gms) complete all as specified and directed

S&F 125mm dia CP brass shower rose with swivel joints, any colour including shower arm 15mm dia, 195mm long with bend of 45 degree with flange of CP brass complete all as specified and directed.

M&L for Hard core100 mm thick, using broken bricks of guage n.exc. 63mm, deposited, spread and levelled in layeres n.exc. 15 cm thick, watered and rammed to a true surface, as in below sub base, complete all as specified and directed by Engr-in- Charge.

M&L for PCC 100 mm thick, type D-2, 1:4:8 (40mm graded aggregate) as in sub-base, complete all as specified and directed.

M&L 50 mm thick PCC, type B-1, 1:2:4 (20mm graded aggregate) as in flooring in , surface finished even and smooth without using extra cement complete all as directed.

M & L for non skid coloured ceramic tiles of 7 to 8 mm thick , area of each tile exceeding 0.11 sq m but not exceeding 0.18Sq m in floors set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match over a screed layer of 15 mm thick in CM 1:6 complete all as specified and as directed.

M&L for Glazed ceramic tiles, coloured (light shade with dark shade boder as approved), of size 300x450 of 7mm thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry and pointed in white cement with pigment to match the colour of tiles, laid over and including 10mm thick backing in cement mortar (1:4) complete all as specified and directed.

M&L for Cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in filling of steel chowkhats including necessary form work complete all as specified and directed.

3mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads (supplied alongwith shutters), in squares n.exc 0.50 Sqm complete all as specified and directed.

M&L 50mm thick PCC(1:2:4) type B1 (20mm graded stone aggregate as in plinth protection laid in alternative panels finished even and smooth without using extra cement complete all as specified and as directed.

M&L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35Grade with grey cement and no pigment used, excluding laying of sand cushioning complete all as specified and as directed. Note :- Sand will be measured and paid seperately

M&L for Dry and clean fine sand for cable cushioning to underground cable protection/ sand filling under floors or in foundations including watering and consolidation , complete all as specified and directed. (Excavation and earth work measured separately). Note- Punned down thickness shall be measured.

M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

M&L for PCC 1:3:6 type C2 using 40mm graded aggregate in foundations, filling and mass concrete complete all as specified and directed

S&F 150m dia SWG drain pipes laid in trenches and jointed complete all as specified and directed

M&L for concrete bed to drain pipes including paving under and haunching against the sides of pipes afrter they are laid and tested in 150 mm bore at pipe complete all as specified and directed.

M&L for providing precast cement concrete type B-1 1:2:4 in manhole cover including necessaryh form work excluding reinforcement and set in CM 1:4 complete all as specified and directed.

M&L for cement concrete type B-2, 1:2:4 in surface channels and drains complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm (nominal area), PVC insulated,FRLS multistranded, single core unsheathed, copper conductor cables drawn through and including PVC conduit with all accessories concealled in wall and fixed to ceiling etc. with and including 1.5 Sqmm (nominal area) PVC FRLS insulated, unsheathed, multi stranded, single core, copper cable green in colour as earth continuity wire connecting to common earth dolly including sunken boxes of suitable size with 3 mm thick hylam sheet top cover fixed with suitable size of brass screws for mounting switches, sockets, regulators etc complete for one light/fan/bell point controlled by one, one way switch all as specified and directed. (a) One light point / fan point/ Exhaust point controlled by one single pole one way switch.

All as per item 90 above but One 3 pin 5 Amp socket outlet point controlled by one switch on same board. complete all as specified and directed.

All as per item 90 above, but one switch socket outlet multi purpose, 3pin, 15 Amps, point to be controlled by one switch and wiring with 2.5 Sqmm PVC FRLS cable,insulated, stranded, unsheathed copper conductor on Independent board with continuous earth wire of size 2.5 sqmm, PVC copper conductor, insulated, unsheathed, stranded, complete all as specified and directed.

S&F Switch piano flush type 6 amps, single pole one way, white in colour, duly ISI marked complete all as specified and directed.

S&F 6 Amps Socket 2 in 1, Urea backpiece (IP20), white in colour, duly ISI marked complete all as specified and directed.

S&F Ceiling rose surface type, 240 volts, 50 Hz, 6A, Pilot 3 plate, white in colour, bakelite 65 x 50mm, 3 terminals duly ISI marked complete all as specified and directed.

S&F batten holder, 240 volts, 50 Hz, 6A, white in colour, duly ISI marked complete all as specified and directed. Make- Anchor/ Cona/ Plaza.

S&F LED bulb of 9/10 watts B-22 CDL 3 star 6500K, complete all as specified and directed.

Supply and fixing LED light fitting 1 x 20 Watt, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S & F wall /ceiling mounting LED 9/10 Watt tube light fitting complete with all acessories 1x9 Watt LED , with CCT of 6000k suitable for domestic application, 240 Volts, 50 Hz, and internally pre-wired with 1.5 sqmm twin twisted flexible cable copper conductor and connection complete all as specified and directed.

S&F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/ 66 protection complete all as specified and directed.

S&F exhaust fan heavy duty with louvers complete of sweep size 300mm, 900 RPM, single phase, with bolts, nuts and washers, size of the bolt 15 cm long 12mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/00.0076 three core from ceiling rose to exhaust fan max 1.5 mtr for giving connection complete all as specified and directed.

S&F Factory made sheet metal enclosures double door type made out of CRCA 1.2 mm thick M.S sheet,powder coated, TPN DB with 200 Amps rated bus bar, 4 way, IP-42 protection surface mounting, 240 volts, dust and vermin proof, suitable for incorporation of MCBs duly cocealled in wall, factory made, including making good distrubbed surfaces with matching colour. complete all as specified and directed.

S&F MCB TPN, 32 Amps, 240 volts, 10KA duly ISI marked, complete all as specified and directed.

S&F MCB SP, 6A-32 Amps, 240 volts, "B" series, 10KA duly ISI marked, complete all as specified and directed.

Supply and Fix metal enclosure (plug & socket type DB) complete including single pole and neutral enclosure with two pin, earth plug and socket complete with one SP MCB C Curve type of capacity 20 Amp, 10 KA all as specified and directed.

Supply, fixing connecting and testing energy efficient (BEE 5 Star rated) electric water heater vertical storage type of 25 Ltrs capacity with stainless Steel inner tank, brass assembly, pressure release valve, heating element 1500/2000 W including all other accessories with high quality external finishes single phase with working Voltage 240 volts, 50 Hz, ISI marked complete all as specified and directed. Note: The cost of fixing of geysers including NRV,stud/ nuts/fastners, bolts, washers. and making good the disturbed surfaces to match with the existing surface is deemed to be included in the unit rate quoted. Bidders are requested to quote their rate accordingly.

Supbly and fixing PVC connection 15mm size with brass nuts of length 600 mm for Hot/cold water supply complete all as specified and directed.

Supply and fxing bib tap fancy type cast copper alloy with crutch or butterfly handle, screwed down with chromium plated for iron pipe 15mm dia complete all as specified and directed.

Supply and fixng Sheet metal enclosure with socket plug Top and MCBs single pole and neutral enclosure with a two pin and eath plug socket complete with one single pole MCB of 20 Amp 'B Series capacity including fastners, bolts, washers. and making good the disturbed surfaces to match with the existing surface complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10.0 sq mm 4 core complete all as specified and directed

S&F Cover to underground cable with one layer of bricks using sub class ‘B’ bricks (old size) laid flat across the cable complete all as specified and directed. Note:- (Excavation and earth work will be measured separately).

S&F Mild steel galvanised pipe, light grade, 40 mm nominal bore for passing of cable, fixed to poles/walls, laid under floor/road crossings, complete with and including clamps socket & elbow etc complete all as specified and directed.

Supply and fix Galvanised iron steel tubing medium grade of size 25mm complete including cutting of existing pipe line for jointing with all fittings such as bend, tee, reducer, elbow and union of require size including fastners, bolts, washers,laid on wall and making good to the disturbed surface after making hole,complete all as specified and directed.

Supply and fixing stop valve, cast copper alloy fancy type, chromium plated screwed down, high pressure with crutch or butterfiy handle screwed both side for iron pipe 25 mm bore complete all as specified and directed.

Supply and fixing stop valve, cast copper alloy fancy type, chromium plated screwed down, high pressure with crutch or butterfiy handle screwed both side for iron pipe 20 mm bore complete all as specified and directed.

M&L for Earthing complete with galvanized steel plate electrode of size 60 cm x 60cm x 6.3 mm thick burried directly in ground vertically to a depth not less than 2.25 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level, connected to earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles as shown in Electrical Plate No- 3 of SSR Part-1 (2009). The other end of GI earth wire is connected to main switch board/ main DB's/ earthing test point including all necessary excavation and earth work in any type of soil, adequate quantity of charcol dust & common salt all around the earth plate minimum 150mm in all directions with & including watering pipe 20mm dia GI medium grade, GI funnel made out of 0.63mm thick GI sheet, wire gauge, 50mm thick RCC cover in PCC 1:2:4, type B-1, duly reinforced with 6mm dia mild steel round bars @ 150mm both ways center to center with suitable lifting handle to cover, earth pit of PCC 1:3:6 type C-1, GI protection pipe light grade 15 mm bore up to 7.5m length from earth electrode & engraving of earth marking on nearby building with CM 1:4 plate size 200 x 150 x 15 mm, two coats of painting over a red oxide to exposed steel surfaces and testing complete all as specified and directed. Note: On testing after completion of job, if desired earth resistance is not obtained, the earting shall be redone by the contractor without any extra cost to govt.

Karan Engineers (BID ID -3347128)

VK ENTERPRISES (BID ID -3347527)