Z.O.II.C.No.E1/641112/2025

Sectioning The Site Including Cutting Heavy Undulation and Levelling Etc. Complete

Providing and laying Granular Sub base

Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 250 mm thick specification including premixing the materials with water at OMC in mechnanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev-5

Providing And Laying Plain Cement Concrete Grade M15 (Nominal Mix) Using 20mm And Down Graded Iss Hard Broken Granite Metal Including Cost And Conveyance of All Materials To Site Including Costs of Crushed Stone Sand (M Sand), Cement And Labour Charges For Laying Compacting And Pumping Charges Curing And All Other Incidental Chrages Etc Complete In Accordance With Is 456 - 2954 (If pumping of Concrete is required).

Providing And Laying. In Position, Standardised Concrete Mix M-25 Grade In Accordance With Is:456-2000; Using 20mm And Down Graded Hard Broken Granite Stone Jelly For All Rcc Items of Works With Minimum Cement Content of 400 Kg/M3 And Maximum Water Cement Ratio of 0.45 Including Admixture (Plasticiser / Super Plasticiser) In Recommended Proportions As Per Is:9103 to accelerate, Retard Setting of Concrete, Improve Workability Without Impairing Strength And Durability With About (5.0 Cu.m.) 7730 Kg. of 20mm Machine Crushed Stone Jelly And With About (3.3 Cu.m.) 5156 Kg. of 10-12mm Machine Crushed Stone Jelly And With About (4.79 Cu.m.) 7670 Kg of Crushed Stone Sand (M Sand), But Excluding Cost of Reinforcement Grill And Fabricating Charges, Centering And Shuttering And Also Including Laying, Vibrating With Mechanical Vibrators, Finishing, Curing and including pumping charges Etc. And Providing Fixtures Like Fan Clamps In The Rcc Floor/ Roof Slabs, Wherever Necessary Without Claiming Extra, Etc., Complete Complying With Standard Specification And Os Directed By The Departmental Officers, The Coarse And Fine Aggregates To Be Used Should Comply With The Requirements of Is Standards. (No Separate Payment Will Be Made By The Department For The Excess Usage of Materials) (If pumping of Concrete is required).

Supplying and erecting centering for plane surfaces such as RCC Floor Slab, Roof Slab, Loft, Landing Slabs, etc with necessary supports and strutting upto 3.60m height in all floors with all cross bracings using MS Sheets made of 10 gauge thick welded with MS angle of Size 25mm x 25mm x 3mm for boarding laid over steel adjustable span of size 2m x 2m (expandable upto 3.60m) and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick) , etc complete complying with standard specifications. Steel adjustable span and Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid).

Finishing the Concrete surface of various grades using Power Trowel including hire charges of Power Trowel, fuel charges, labour chargesetc., complete

Providing & Cutting of transverse const. dummy joints of C.C.Slab for a depth of 100mm and a width of 6mm etc., including surface texturing

Providing Two – Part Polysulphide sealant in the expansion joints of concrete to a thickness of 3mm including cost of the material, layingetc., complete as per the specifications and as directed by the Engineer and confirming to MORT&H having superior UV and fuel attack resistance.

Please Enable Macros to View BoQ information