REPAIRS/ MAINTENANCE OF EXISTING UNSERVICEABLE OF INTERNAL ELECTRIFICATION FITTINGS AND FIXTURES IN MD ACCN QUEENS GARDEN AREA, SFC AREA, SCOM AREA, PG RD AREA, KAHUN RD AREA, RS RD AREA, KOHIMA LINE AND OTHER AREA OF AGE E/M UNDER GE (NORTH) PUNE

Amount

Taking down carefully aluminium point wiring (light, fan, socket or power), complete (fittings such as switches, ceiling rose, pendent, regulators, light fittings etc.) and making good disturbed surfaces of wall, floor etc. complete all as directed.

Taking down the existing unserviceable main switch/ cut out/ DBs of any type/ capacity/ description as existing at site including MCBs any type/ capacity and making good the disturbed surfaces of wall/ ceiling to match with the existing finishes complete all as directed.

Taking down the unserviceable submain wiring of any type/ description as existing at site including making good the disturbed surfaces to match with the existing finishes complete all as directed.

Material and labour for point wiring using approved colour coding as per IS, with multistranded FRLS copper conductor 1.5 Sq. mm (nominal area), two single core PVC insulated and unsheathed multistranded cable 1100 volts grade ISI-694 marked through and including heavy duty ISI marked, rigid PVC concealed conduit including all accessories after chasing in wall/ ceiling etc, with GI terminal sunken boxes 1.2mm thick 60mm deep of suitable size as per site requirement, covered with modular white cover plate with frame suitable for housing modular switches, sockets, regulators etc. including PVC insulated multistranded FRLS copper conductor 1.5 Sqmm (nominal area) single core cable as earth continuity conductor and connecting to the common earth dolly for one light point controlled by one, one way switch 5 Amps complete all as specified and as directed.

All as per serial item No.4 here-in-before but point wiring for one ceiling fan/ exhaust fan point controlled by one, one way switch 5 Amps and regulator.

All as per serial item No.4 here-in-before but point wiring for one 3 pin 5 Amps socket outlet controlled by one switch on independent board.

All as per serial item No.4 here-in-before but point wiring for one bell point controlled by one bell switch 5 Amps.

All as per serial item No.4 here-in-before but point wiring for one 3 pin 5 Amprs socket outlet controlled by one switch on same board.

All as per item No 4 above but with multistranded copper conductor 2.5 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded cable 1100 Volt grade ISI-694 marked including PVC insulated multistranded copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly.

Material and labour for point wiring using approved colour coding as per IS, with multistranded FRLS copper conductor 1.5 Sq. mm (nominal area), two single core PVC insulated and unsheathed multistranded cable 1100 volts grade ISI-694 marked through and including heavy duty ISI marked, PVC casing and capping including all accessories, GI terminal boxes 1.2mm thick 60mm deep of suitable size sunken/ surface as per site requirement, covered with modular white cover plate with frame suitable for housing modular switches, sockets, regulators etc. including PVC insulated multistranded FRLS copper conductor 1.5 Sqmm (nominal area) single core cable as earth continuity conductor and connecting to the common earth dolly for one light point controlled by one, one way switch 5 Amps complete all as specified and as directed.

All as per serial item No.10 here-in-before but point wiring for one ceiling fan/ exhaust fan point controlled by one, one way switch 5 Amps and regulator.

All as per serial item No.10 here-in-before but point wiring for one 3 pin 5 Amps socket outlet controlled by one switch on independent board.

All as per serial item No.10 here-in-before but point wiring for one bell point controlled by one bell switch 5 Amps.

All as per serial item No.10 here-in-before but point wiring for one 3 pin 5 Amprs socket outlet controlled by one switch on same board.

All as per serial item No.10 here-in-before but with FRLS copper conductor 2.5 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded cable 1100 Volt grade ISI-694 marked including PVC insulated multistranded FRLS copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor for 3 pin 15 Amps socket outlet on independent board.

Material and labour for point wiring using approved colour coding as per IS, with multistranded FRLS copper conductor 1.5 Sq. mm (nominal area), two single core PVC insulated and unsheathed multistranded cable 1100 volts grade ISI-694 marked through and including heavy duty ISI marked, PVC casing and capping including all accessories, MS sunken boxes 1.6mm thick 60mm deep of suitable size as per site requirement, covered with 3mm thick hylem sheet, ISI marked for switches, sockets, regulators etc. including PVC insulated multistranded FRLS copper conductor 1.5 Sqmm (nominal area) single core cable as earth continuity conductor and connecting to the common earth dolly for one light point controlled by one, one way switch 5 Amps complete all as specified and as directed.

All as per serial item No.16 here-in-before but point wiring for one ceiling fan/ exhaust fan point controlled by one, one way switch 5 Amps and regulator.

All as per serial item No.16 here-in-before but point wiring for one 3 pin 5 Amps socket outlet controlled by one switch on independent board.

All as per serial item No.16 here-in-before but point wiring for one bell point controlled by one bell switch 5 Amps.

All as per serial item No.16 here-in-before but point wiring for one 3 pin 5 Amprs socket outlet controlled by one switch on same board.

All as per serial item No.16 here-in-before but with FRLS copper conductor 2.5 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded cable 1100 Volt grade ISI-694 marked including PVC insulated multistranded FRLS copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor for 3 pin 15 Amps socket outlet on independent board.

Supply and fix for modular switch flush type, single pole, one way 5/ 6 Amps, 1 module complete all as specified and as directed.

Supply and fix for modular switch piano flush type, single pole, one way, 15/ 16 Amprs, 1 module complete all as specified and as directed.

S & F for Modular Socket outlet multipurpose having provision for 3 pin, 5 Amp and 2 pin, 5 Amp, piano flush type complete all as specified.

S & F for Modular Switch Socket outlet multipurpose having provision for 3 pin, 15 Amp and 3 pin, 5 Amp, piano flush type complete all as specified.

Supply and fix for modular step type fan regulator 120 watt 1 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.

Supply and fix for modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.

Supply and fix for modular type bell push one way 5 Amps 1 module complete all as specified and as directed.

Suply and fix for bell electric ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed

Supply and fix for lamp holder, PVC body of brass suitable for batten fitting complete all as specified and as directed.

Supply and fix for ceiling rose, surface bakelite three terminal 230 volt, 50 Hz suitable ISI marked for batten fitting complete all as specified and as directed.

Supply and fix for switch piano flush type, single pole, one way, 6 Amp complete all as specified and as directed.

Supply and fix for switch piano flush type, single pole, one way, 15 Amp complete all as specified and as directed.

Supply and fix for switch socket combination, 2 in 1, 3 pin 5 Amps and 15Amp flush type universal complete all as specified and as directed.

Supply and fix for socket outlet multipurpose having provision for 3 pin, 6 Amp and 2 pin, 6 Amp, piano flush type complete all as specified and as directed.

Supply and fix for socket outlet multipurpose having provision for 3 pin, 15 Amp and 3 pin, 5 Amp, piano flush type complete all as specified and as directed.

Supply and fix for bell push 6 Amp 230 volt 50 HZ AC supply complete all as specified and as directed

Supply and fix for ceiling fan regulator socketed typ, step type, flush type heavy duty suitable to work on 120 watts, 230 volts AC supply complete all as specified and as directed.

Supply and fix for fan capacitor 4.0 Mfd, 230 volts including PVC clamps complete all as specified and as directed.

Supply and fix for fan capacitor 2.5 Mfd, 230 volts including PVC clamps complete all as specified and as directed.

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with multistranded copper conductor of size 4.0 Sq mm nominal area and drawn through PVC non metallic rigid PVC casing caping and its accessories including one run of PVC insulated 2.5 Sq mm (nominal area) multistranded copper conductor FRLS cable as earth wire and connected from DB to DB/ main board complete all as specified and as directed. Note:- Two runs of 4 sqmm cable,one run of 2.5 sqmm cable and one run of PVC casing caping and accessories will be measured as one unit

M & L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLS cable with multistranded copper conductor of size 6.0 Sq. mm nominal area and drawn through PVC non metallic rigid PVC casing caping and its accessories including one run of PVC insulated with 4.0 Sqmm (nominal area) multistranded copper conductor FRLS cable as earth wire and connected from DB to DB/ main board complete all as specified and as directed. Note:- four runs of 6 sqmm cable,one run of 4 sqmm cable and one run of PVC casing caping will be measured as one unit

M & L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLS cable with multistranded copper conductor of size 10 Sq. mm nominal area and drawing into PVC non metallic rigid heavy duty PVC conduit and its accessaries ISI marked heavt duty of suitable size including with two runs of PVC insulated 6.0 Sqmm (nominal area) multistranded copper conductor FRLS cable as earth wire and connected from DB to DB/ main boardcomplete all as specified and as directed. Note:- four runs of 10 sqmm cable, two runs of 6 sqmm cable and one run of PVC heavy duty conduit will be measured as one unit.

S & F for MCB DB VTPN 4 way with provision for FP MCB/Isolator/RCCB etc as incommer and SP/TP MCBs as out going double door IP 43 complete prewired including Bus Bar etc suitable for operation on 415 volt 50 Hz AC supply including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed .Make - Schindier/Legrand/L&T/ ABB

S & F for sheet metal enclosure MCB DB TPN 4 way with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. Make - Schindier/Legrand/L&T/ ABB

Supply and fix for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

S & F for sheet metal enclosure MCB DB SPN 6 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. Make - Schindier/ Legrand/ L&T/ ABB

S & F for sheet metal enclosure MCB DB SPN 4 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. Make - Schindier/Legrand/L&T/ABB

Supply and fix for wall mounted LED 18watts with out put of 1800 lumens , box type (decorative) light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver connector block etc complete with all accessories internally pre wired all as per Cat No. BLRB-DB118 & BLRB 18W CW of make Bajaj or equivalent of make Philips/ Wipro/ Havells/ Syska/ Jaguar as approved and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 4' x 18/ 20 watts complete all as specified and as directed.

S & F for LED down light recess mounted luminare, square type 15 watts with efficiency of 100 lumens per watt, sleek design aluminium housing polycarbonate diffuser white finish operating voltage 150 V-270 V AC, 50 Hz all as per Cat Part No BZSLO 15W NW of Make- Bajaj or its equavalent in Philips, Wipro, Havells.

Supply and fix for recessed mounted low depth LED luminaire 2'x2' square LED panel 36 watts 596x596x9mm size sleek design aluminium housing, polycarbonate diffuser white powder coated finish operating voltage 140-270 volts, AC, 50 Hz all as per Cat No.BARSQL 36W NW of make Bajaj or equivalent of make Philips/ Wipro/ Havells/ Crompton as approved complete all as specified and as directed.

Supply and fix for LED 10 watts batten aluminium extruded with decorative end caps all as per Cat No. BCLSB 10 NW of make Bajaj or equivalent of make Philips/ Wipro/ Havells/ Crompton as approved complete all as specified and as directed.

Supply and fix for energy saving new generation 10 watts LED bulk head fitting IP-65 luminaire with opal diffuser prewired and necessary mounting arrangements, provision of 3 core multistranded copper conductor of size 23/0.193 from ceiling rose with LED bulb all as per Cat No.BIBWP 10W LED of make Bajaj or equvialent of make Philips/ Wipro/ Havells/ Crompton including removal of old existing unserviceable light fitting complete all as specified and as directed.

S & F for Energy saving new generation environmental friendly long life versatile pressure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. Make :- Bajaj Cat part No BRLEP 25W LED (Edge plus series) or its equvalent in Philips, Wipro, Havells.

Supply and fix for MCB TPN rated capacity 63 Amps, 415Volts breaking capacity 10 KA 'C' series complete all as specified and as directed.

Supply and fix for MCB TPN rated capacity 32 Amps, 415Volts breaking capacity 10 KA 'C' series complete all as specified and as directed.

Supply and fix for MCB SPN rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA complete all as specified and as directed.

Supply and fix for MCB SP rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA 'C' series complete all as specified and as directed.

S & F for PL type lamp 2 pin 9 watt suitable for operation on 230 volt 50 Hz A C supply including removal of old unserviceable one complete all as specified and as directed

S & F for PL type lamp 2 pin 11 watt suitable for operation on 230 volt 50 Hz A C supply including removal of old unserviceable one complete all as specified and as directed

S & F for PL type lamp 2 pin 18 watt suitable for operation on 230 volt 50 Hz A C supply including removal of old unserviceable one complete all as specified and as directed

S & F for metal clad box suitable for 230 volt 50 Hz AC supply three pin with MCB SP 20/32 Amps including removal of old unserviceable one complete all as specified and as directed complete all as specified and as directed

Supply and fix for plastic body exhaust fan, AC single phase, 240 volts of size 150 mm sweep with louvers all as per Cat No. Maxio 6" Ivory new of Make Bajaj or equivalent of Make Crompton Greaves/ Havells with necessary connection and replacement of flexible copper cable from ceiling rose including removal of old unserviceable one complete all as specified and as directed

Supply and fix for plastic body exhaust fan, AC single phase, 240 volts of size 200 mm sweep with louvers all as per Cat No. Maxma DX 8" of Make Bajaj or equivalent of Make Crompton Greaves/ Havells with necessary connection and replacement of flexible copper cable from ceiling rose including removal of old unserviceable one complete all as specified and as directed.

Supply and fix for plastic body exhaust fan, AC single phase, 240 volts of size 250 mm sweep with louvers all as per Cat No. Maxma DX 10" of Make Bajaj or equivalent of Make Crompton Greaves/ Havells with necessary connection and replacement of flexible copper cable from ceiling rose including removal of old unserviceable one complete all as specified and as directed.

S & F for LED post top lantern 40 watt light fitting made of cast aluminium spigot housing with decarative opal acrylic diffuser with IP 65 protection complete with all accessories fixed on GI pipe 50 mm dia including removal of old unserviceable one complete all as specified and directed. Make Bajaj Cat part No BGCL 40 W LED or its equavalent in Philips, Wipro.

S & F for metal flush box made of GI sheet 1.2 mm thick, 60 mm deep with earh terminal including necessary cutting in wall and POP work as required for matching existing slot in wall of size 1 or 2 module including removal of old unserviceable one complete all as specified and as directed.

Supply and fix for metal flush box made of GI sheet 1.2mm thick, 60mm deep with earth terminal including necessary cutting in wall and POP work as required for matching existing slot in wall of size 4 module including removal of old unserviceable one complete all as specified and as directed.

Supply and fix for metal flush box made of GI sheet 1.2mm thick, 60mm deep with earth terminal including necessary cutting in wall and POP work as required for matching existing slot in wall of size 6 module including removal of old unserviceable one complete all as specified and as directed.

Supply and fix for metal flush box made of GI sheet 1.2mm thick, 60mm deep with earth terminal including necessary cutting in wall and POP work as required for matching existing slot in wall of size 8 module including removal of old unserviceable one complete all as specified and as directed.

S & F for PVC surface modular box with modular plates inner and outer with earh terminal including necessary fixing arrangements of size 1 or 2 module including removal of old unserviceable one complete all as specified and as directed.

S & F for PVC surface modular box with modular plates inner and outer with earh terminal including necessary fixing arrangements of size 4 module including removal of old unserviceable one complete all as specified and as directed.

S & F for PVC surface modular box with modular plates inner and outer with earh terminal including necessary fixing arrangements of size 6 module including removal of old unserviceable one complete all as specified and as directed.

S & F for PVC surface modular box with modular plates inner and outer with earh terminal including necessary fixing arrangements of size 8 module including removal of old unserviceable one complete all as specified and as directed.

Supply and fix for modular plates white colour with frame of 1 module including removal of old unserviceable one complete all as specified and as directed.

Supply and fix for modular plates white colour with frame of 2 module including removal of old unserviceable one complete all as specified and as directed.

Supply and fix for modular plates white colour with frame of 3 module including removal of old unserviceable one complete all as specified and as directed.

Supply and fix for modular plates white colour with frame of 6 module including removal of old unserviceable one complete all as specified and as directed.

Supply and fix for modular plates white colour with frame of 8 module including removal of old unserviceable one complete all as specified and as directed.

S & F for LED spot light suitable for operation on 230 volt 50 Hz AC supply for 9 to 12 watts as per sample including removal of old unserviceable one complete all as specified and as directed

Supply and fix for casing and capping heavy duty, size 50mm with all fittings including removal of old unserviceable one complete all as specified and as directed

Supply and fix for casing and capping heavy duty, size 25mm with all fittings including removal of old unserviceable one complete all as specified and as directed

Supply and fix for casing and capping heavy duty, size 20mm with all fittings including removal of old unserviceable one complete all as specified and as directed

Material and labour for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less then 2.25 meter deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth lead wire 4.0mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel and connected to main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 54 cm x 54 cm x 5 cm with one handle for lifting made out of 8mm dia MS bar, funnel, wire mesh, 20 mm bore galvanized steel tubing (medium grade) for watering, filling charcoal or coke and salt in alternate layers, 15mm bore galvanized steel tubing light grade for protection of earth lead connection, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown on electrical plate No.3 of SSR Part-I . (Note: GI earth wire and protection pipe upto 7.5metres shall be deemed to be included in quoted rate)

Note : 1. Rerformance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

K.K.Enterprises

PAMS ENTERPRISES

Devesh enterprises

Mahindra Electric Stores

AN-ICON Engineering Technologies And Infrastructure Developments Pvt. Ltd

M/S DHEER ENGINEERING