Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.1 CrAccepted-Finance NO 102 2ND FLOOR SHEIK DAWOOD STREET ERODE 638 001 | ERODE | TAMIL NADU | 638001 | ₹27.1 Cr | L1 | Accepted-Finance 10.79 Percentage more than the estimate rate. |
| 2 | L2₹28.3 CrRejected-Finance SAKTHI MAHAL NO 63 PERUNDURAI ROAD ERODE 638 011 | ERODE | TAMIL NADU | 638011 | ₹28.3 Cr | L2 | Rejected-Finance 15.91 Percentage more than the estimate rate. |
| 3 | Rejected-Technical NAMAKKAL | - | - | Rejected-Technical Bidder Submitted Technical Qualification Documents are not Satisfied. |
Tender Value
₹26 Cr
EMD Value
₹26 L
Closing Date
17 Mar 2023, 3:00 pmClosed
Commissioner
Tiruppur City Municipal Corporation, Municipal Office Road, Tiruppur 641604.
Construction of New Bus Stand at Kovilvazhi in Tiruppur City Municipal Corporation.
2023_MAWS_285023_1
E1 / 2191 / 2022
Open Tender
Civil Works - Buildings
540 days
Tiruppur
Please refer Tender documents.
6 documents required · 6 mandatory
₹0
₹26 L
Tiruppur City Municipal Corporation, Tiruppur.
19 Apr 2023
31 Jan 2023
17 Mar 2023
31 Jan 2023
17 Mar 2023
1 Feb 2023
1 Feb 2023
Amount
Dismantling the existing Plain cement concrete including removing the debris from the site and stacking useful material at work site for reuse etc., complete complying with standard specification.
Dismantling the existing Brick / Stone masonry in cement mortar including removing the debris from the site and stacking useful material at work site for reuse etc., complete complying with standard specification.
Dismantling the existing Reinforced cement concrete including removing the debris from the site and stacking useful material at work site for reuse etc., complete complying with standard specification.
Dismantling the existing AC / Galvalume / Light Roofing sheet roofing without roof Truss including removing the debris from the site and stacking useful material at work site for reuse etc., complete complying with standard specification.
Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification. for first depth Upto 2.00 below GL
Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification. for Second depth 2.00 to 3.00M
Removal of excavated excess earth away from the site to 5 KM including loading and transportation charge etc., complete complying with standard specification.
Supplying and filling in basement, etc with filling M Sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.
Cement Concrete 1:4:8 (One Cement, Four sand and Eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification
Providing and laying in position standardised concrete mix M-30 Grade in accordance with IS 456 2000 using 20mm and down graded hard broken jelly for all RCC items of works with minimum cement content of 400kg/cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without impairing strength and durability with about (5.0cum), 7730kg of 20mm machine crushed stone jelly and with about (4.79cum) 7670kg of sand, but excluding cost of reinforcement grill and fabricating charges cantering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing etc and providing fixtures like fan clamps in the RCC floor / Roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and directed by the departmental officers.
For Below GL from 1.50M to 4.50M
For foundation & Basement
ABOVE GROUND LEVEL
Ground Floor
First Floor
Second Floor
Providing and laying in position standardised concrete mix M-20 Grade in accordance with IS 456-2000 using 20mm and down graded hard broken jelly for all RCC items of works with minimum cement content of 325kg/cum and maximum water cement ratio of 0.50 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without impairing strength and durability with about (5.0cum), 7730kg of 20mm machine crushed stone jelly and with about (3.30cum) 5156kg of 10-12 mm machine crushed stone jelly and with about (4.79 cum) 7760 kg of sand, but excluding cost of reinforcement grill and fabricating charges cantering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing etc and providing fixtures like fan clamps in the RCC floor / Roof slabs wherever necessary without claiming extra cost including cost of material, labour, HOM of machinery, etc., complete complying with standard specification.
For Below GL from 1.50M to 4.50M
For foundation & Basement
Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D)Data 38 For Foundation
Footing, Plinth Beam & RCC Wall up to 1m height
Columns
Roof Slab and Beam
Plain Surface above GL from 3.00M to 4.00M For ARCH
Plain Surface above GL from 4.00M to 5.00M For Arch
Plain Surface above GL from 5.00M to 6.00M For Arch
Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D)Data 38 - RC Wall up to 3m height (For Sump& STP)
Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D)Data 38 -RC WAll For above 1M height
Supplying, fabricating and placing in position of Steel Reinforcement using Mild Steel or Ribbed Tor steel bars for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors etc., complete complying with standard specification.
Supplying and filling in foundation, basement, etc with Well Gravel in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.
Brick work In CM 1:5 mix using best Second Class ground Moulded Chamber Burnt Bricks 9"x4?"x2 3/4" having 350 kg/cm² compressive strength and 15% or less water absorbent in the period of 24hours immersement and confirming to ISI specifications including finishing, curing etc., complete complying with standard specification.
For foundation & Basement
In Ground Floor
First Floor
Second Floor
Construction of HALF THICK BRICK PARTITION WALL using ground moulded second class chamber burnt bricks of size 9" x 4 3/8" x 2 3/4" in cement mortar 1:3 (One cement and three sand) using hoop iron reinforcement if found necessary (the hoop iron will be supplied departmentally free of cost at site of work) including finishing and curing as directed by the Departmental Officers complete complying with standard specification.
In Ground Floor
In First Floor
Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers.
Plastering with cement mortar 1:5 mix, 12mm thick in all floors using clean screened sand and including cost of curing for fifteen days from the completion of the work and surface should free from undulations and including the cost of preparing the surface for plastering and protecting from other damages till setting of mortar etc., complete complying with standard specification.
Paving the floor with best quality Flamed Steel Grey Granite Slab 1200mm x 600mm, 16mm to 18mm thick in cement mortar 1:3 mix and pointing with white cement and colouring pigments to the colour of slabs including the cost of nosing, grooving etc., complete complying with standard specification.
Paving the floor with 8mm thick Double Charged Vitrified Tiles in all floors over a base layer of cement mortar 1:3 [one cement and three sand] 20mm thick of walls and floors and pointed with the same colour cement neatly, including polishing with electric polishers to a high degree so as to make it perfectly smooth and showing etc., complete complying with standard specification.
Paving the floor with Design Antiskid Ceramic Tiles (Colour and shade as directed) of size 305mm x 305mm x 6mm in all floors over a base layer of cement mortar 1:3 [one cement and three M-sand] 20mm thick laid in-situ and pointed with the same coloured cement etc., complete as per standard specification.
Dadooing the walls with 8mm thick Ceramic Tiles of size 300mm x 450mm of approved make and quality in cement mortar 1:2 mix [one cement and two sand] over 10mm base layer plastering and pointing with white cement neatly etc., complete as per standard specification.
Providing Polymer Coating (Water Proof Coating) for sunken portion of toilet with following specification and the surface shall be cleaned to remove all dust, foregin, matters lose materials or any other deposits of contamination by rubbing with wire brush. Slurry: Dry blend and polymer liquid blend shall be mixed into the desired ratio as per recommendation of the supplier. The mix shall be stirred thoroughly until no bubbles remain in the mix. Any lumps found in mix shall be removed. Apply first coat of polymer modified cementitious slurry by brush on wet cleaned surface. After drying, second coat shall be applied on the first coat as directed by the departmental officers etc. The rate inclusive of coat of materials and labour etc., complete
Weathering Course with Brick jelly lime concrete made in Broken Brick Jelly 20mm gauge in pure slaked lime (no sand to be added) laid over roof slab, the proportion of brick jelly to lime being 32 to 12.5 and well beated with wooden beaters for giving required slope and thickness etc., complete complying with standard specification.
Finishing the top of the roof slab with one course of Machine pressed tiles of size 20cm x 20cm x 2cm of approved quality laid in cement mortar 1:3 [one cement and three sand] 12mm thick mixed with waterproofing compound 2% by the weight of cement used and the top pointed with same mortar etc., complete complying with standard specification.
Supply and fixing FRP door shutter with frames made out of FRP Sheets of 3mm thick of over all size 65mm x 50mm with rebate suitably reinforced using MS Angle / Flats, cost of hold fasts and solid core FRP shutter Panel of 5mm thick and hollow core frames of 3m wall thickness for styles and rails etc., complete complying with standard specification.
ABS DOOR (Design Pre-laminated Doors) : Providing of 35mm thick factory made Pre-laminated ABS (Acrolynitrile Butadiene Styrene) Door Shutter moulded in different designs, consisting of all round frame made out of water proof solid foam PVC bar of size 20 x 32mm, reinforced by 32 x 32mm - 2 Nos., for vertical made out of LVL (Laminated Veneer Lumber), core material of 32mm thick high density craft paper honey comb board, sandwiched on both sides with pre-laminated ABS sheet thickness of 1.5mm. PVC edge banding of size 0.45mm on the vertical sides. Hardware made out of steel coated butterfly hinges - 3 Nos., for each shutter and ISI make SS round lock complete for finished item of work, complete complying with the standard specification. The door shutter and frame should be got approved from the Executive Engineer before use on work
ROLLING SHUTTERS (WITH ISI MONOGRAM) Manually Operated Type ( Upto 8 m2 area) Supplying and Erecting Pull and Push Type Rolling Shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc
UPVC Window : Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Window of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window.
UPVC Ventilator : Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work
Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification
White washing One coats with freshly burnt white shell lime in all floors including cost of lime, blue powder fevicol type gum, brushes, scaffolding charges etc, complete complying with standard specification and as directed.
Painting the wall with texture finish paint including labour charge etc, complete complying with standard specification and as directed.
Painting two coats with ready mixed Plastic Emulsion paint (weather proof) of approved quality and colour over a priming coat ,including thorough scraping, clean removal of dirt and including necessary plaster of paris, putty wherever required etc., complete as per standard specifications.
Painting two coats for New iron work surface using best quality synthetic enamel paint etc., complete complying with standard specification.
Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete
Supplying, fabricating and fixing in position of Alumi.Anod.natural colour matt finish door half glazed and half PLB board using 12 mm thick PLB board and 5.5 mm thick glazed door using rectangular Alu.Box section of following sizes for frame and shutter with necessary accessories such as rubber beading, Al. Clips, Best double action floor springs, Aluminium Handles on both sides,floor stopper,Tower bolt, Locks and glass including all materials, Labour, power consemption charges required for fabrication if necessary chipping, dismantling making necessary holes in RCC Coloums, Beams or Masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing etc.,complete. The Alumi. surface must be anodised with matt finish under electrically controlled condition in accordance with IS specification 1868 / 1962 of Anodic filthickness of not less than 15 Microns (Fifteen) for all sections
Supplying & Installation of Tensile Polyester Fabric minimum of 1050 gsm (Ferrari TX 30)Tensile Membrane, Including MS Structural Steel Work is finished with two coats of epoxy primer and two coats of epoxy paint colour, 12mm SS rope with stay Accessories etc. Complete
Structural Glazing: Providing and fixing structural glazing fabricated from roll formed sections made of galvanized steel colour coated (Base steel as per IS 513 of 'D' quality, galvanized as per IS 277 with Zinc of 120 grams / sqm.) with total coated, thickness of 0.72mm. The glass holding section made of 304 grade SS of 0.6mm thick. Galvanized steel sections are to be used as stiffeners inside the colour coated steel / powder coated sections as per the design requirement. Design calculations are made to suit wind pressures as given in IS 875. Paint specifications: Primer coat with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns or powder coated with pure polyester powder upto 50-60 microns thick. Dimensions: The section should be of 37 x 53mm for frame vertical, 37 x 53mm for frame horizontal section and section for reinforcement should be of 31 x 55mm. glass holding section should be of 37 x 37mm for top and bottom grids in between should be of 37 x 18mm.
Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers) (40 mm Thick)
Plain Cement concrete 1:2:4 [one cement, two sand and four course aggregates] using 20mm size Hard Broken/Machine crushed Granite Stone Jelly including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted etc., complete complying with standard specification.
Fabricating supplying and fixing of pre painted galvanized iron sheets for Roofing with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47mm thick 24 gauge having width 1050mm. The sheet should be G.I base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws and plastic washer. The washer and screws to be fixed by using minute power machine drilled without damaging the sheets paint coating to be regular modified polyester coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like Malabar Mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated, cutting the sheet in to the required size and making ornamental designs as per the site condition and as directed by the departmental officers.
Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification
Fabricating, Supply and fixing of polycarbonate sheet with following Specification. The Sheet Thickness should be 6mm with co-extruded UV coating of 40 microns ensuring weather resistancewaranty with light transmission of not less than 85%. The sheets are having anti glare- white diffuser cover with 100% light disperssion as per standard speciification etc., complete.
Supplying and fixing in position of Steel Fibre Reinforced Concrete (SFRC) Manhole cover (heavy duty with frame) of size 600mm x 600mm with best approved quality etc., complete as per standard specification.
Providing and laying of 83mm thick Rubber Moulded Hydraulic Pressed Paver Block in uniform shape of approved make to be laid in flurring bond pattern with 150mm thick quarry rubbish cushion below the uniform shape of approved non-skitting surface in the top and the rates including levelling the base, preparation of pavers as sub base, quarry rubbish cushion 150mm thick, laying out of pavement, cut the pieces to fix the edge, vibring the pavers, sweeping, transporting, loading and unloading etc., complete
OVER HEAD TANK
Providing and laying in position standardised concrete mix M-30 Grade in accordance with IS 456 2000 using 20mm and down graded hard broken jelly for all RCC items of works with minimum cement content of 400kg/cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without impairing strength and durability with about (5.0cum), 7730kg of 20mm machine crushed stone jelly and with about (4.79cum) 7670kg of sand, but excluding cost of reinforcement grill and fabricating charges cantering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing etc and providing fixtures like fan clamps in the RCC floor / Roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification
Column above GL upto 4.50 m
Column above 4.50 m upto 7.50m
Column above7.50 m upto 11.50m
Floor Slab, beam, Side wall at 12.00M from above GL
Supplying and erecting centering for soffits of plane surfaces like RCC Slabs, Lintels, Sunshades, Square Columns, Staircase waists, Beams etc., including strutting 3m high using mild steel sheets of size 90cm x 60cm and BG 10 stiffened with M.S angles of size 25mm x 25mm x 3mm laid over silver Oak (C.W) joists of size 10cm x 6.5cm (spaced at about 90cm c/c) and supported by casurina props of 10cm to 13cm dia (spaced of 75cm c/c) etc., complete complying with standard specification
Square Column:
Colum above 3.00m to 4.00m
Column above 4.00 m upto 5.00 m
Column above 5.00 m upto 6.00 m
Column above 6.00 m upto 7.00 m
Column above 7.00 m upto 8.00 m
Column above 8.00 m upto 9.00 m
Column above 9.00 m upto 10.00 m
Column above 10.00 m upto 11.25 m
Plain Surface
For brace at 5.60 m height
For brace from 8.20 m to 8.60 m height
Floor beam sides from 11.00 m to 12.00 m above GL - Inside & outside
Floor slab and working platform at 11.64 m above G.L.
Roof slab at 2.95m above floor slab at 14.50M from GL
Curved Surface at 11.50M to 14.50M
Supply and fixing of M.S Steel ladder with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification
Provision for pipe connection arrangements for inlet, outlet scour and overflow etc. including cost of pipes, specials, valve, labour charge for lifting, aligning, cutting, threading, fixing and painting of GI pipes with two coats of approved quality enamel paint etc. complete as detailed below.
65mm dia GI pipes for inlet, Overflow, Scour & delivery connection
90mm dia PVC Threaded coupler
63mm dia PVC Threaded coupler
65mm dia GI Tee
65mm dia GI 90o Bend
65mm dia GM Gate valve
90 mm dia. OD PVC pipe rain water harvesting
ELECTRICAL Work for all Blocks
LT PANELS Design, fabrication, supply, erection,testing and commissioning of following Cubicle type, fully compartmentalized LT Switchboards dust tight and vermin proof, fabricated out of 16 SWG CRCA sheet, chemically treated and painted with 2 coats of primer and two coats of stoving enamel paint of approved shade.The Switchboards should have a Set of suitably rated TPN Aluminium busbars with the specified current and fault level, Insulated with heat shrinkable, color coded PVC Sleeves and supported using DMC/ SMC Pillar or Finger type busbar supports. shall be provided with MCBs at incomer side to protect the controlling and indicating equipment in the lower sides.The design should be as per the standards of the State Electrical Inspectorate.
MAIN PANEL Incomer: 160A FP MCCB -- 2 Nos Digital Multifunction Meter which can read current,voltage,KW,KHhr,Power Factor,THD With Rs-485 Port-1 Nos 1Set -160A TPN Aluminum bus bars, interconnections with colour coated heat shrinkable sleeves and SMC Bus bar supports (40 mtrs) RYB Indication Lamp with 6A SP MCB- 1 No. 160/5A,10VA CL:1,CRCT - 6 Nos. Out Goings: 100A TP MCCB -- 2 Nos 63A TP MCB -- 5 Nos 32A TP MCB -- 1 Nos
MLSB Incomer 63A TPN MCB -- 1 No 1 Set Bus Bars - 100A TPN Aluminium bus bars, inter connections with colour coated heat shrinkable sleeves and SMC bus bar support (10 Meter) Out Goings 32A DP MCB (Side Handled) Add fabrication and other fitting cost 35%
Metering Panel for Parking Block & Main Block The Panel should meet TNEB Standards and have provisions for locking arrangement as per standards Incomer 200A TPN Fuse -- 1 Nos 1 set of Bus bars aluminium with colour coated heat shrinkable sleeve and SMC bus bar support - 30Kgs Outgoing: 40A TPN MCB -- 16 Nos Add fabrication cost 35% of breakers.
Metering Panel for Center Block & Admin Block The Panel should meet TNEB Standards and have Provisions for locking arrangements as per standards Incomer: 200A TPN Fuse -- 1 Nos 1 Set of TPN Aluminium bus bars with colour coated heat shrinkable sleeve - 25 Kgs Out Goings: 40A TPN MCB - 13 Nos Add Fabrication cost 35% of breaker cost
PUMP PANEL ( UG Sump) Incomer 32A TPN MCB 1 Set of TPN Aluminium Bus bars, intterconnection with colour coated heat shrinkable sleeves and SMC bus bar support- (10M) - 7 Kgs 32A TPN MCB -- 8 Nos DOL Starter (1.5 - 3.75kW - Upto 5/6HP) - 6 Nos Add Fabrication Cost.
PUMP PANEL ( Borewell) Incomer 32A TPN MCB 1 Set of TPN Aluminium Bus bars, intterconnection with colour coated heat shrinkable sleeves and SMC bus bar support- (10M) - 7 Kgs 32A TPN MCB -- 8 Nos DOL Starter (Upto 10HP) - 6 Nos Add Fabrication Cost.
UPS COMMON PANEL Incomer 63A TPN MCB 1 Set of TPN Aluminium bus bars interconnections with colour coated heat shrinkable sleeves and SMC bus bar supports(10 M) - 7 Kgs Outgoings: 25A DP MCB -- 4 Nos Add fabrication cost and other fitting costs 35%
LT/LTCT METERING BOX as per IE rules and TANGEDCO norms Supply and installation of 75HP/56 KW (which includes LT meter panel board, 6 Nos. suitable fusecarriers.The panel should meet local TNEB standarads and should have provision for locking arrangements as per local TNEB standarads.
CHANGE OVER ENCLOSURE Supply,installation testing and commisioning of wall mounting type dust tight and verminproof, fabricated out of 16 SWG CRCA sheet, treated and painted with 2 coats of primer and two coats of paint and shall include the following. 100A FP Manual Change Over Switch -1 No.
UPS Supplying, Testing & commissioning of 7.5KVA Single Phase UPS as the following specification Inveter Technology, with less than 50dB noise level, <2% of Harmonic Distortion,Input : 3 phase 230VAC+ Neutral + Earth, 46 - 54 HZ. Output : 220/230 1 phase + N, 50hz +/- 0.1% Frequency, Pure Sine wave output wave form with isolations on both input & outputs UPS shut down with audiable alarm and Indication in case of Out put over voltage, Output undervoltage, Battery Low, Inverter over load, Over temperature & Main Failures. The UPS shall have backup of 60 minutes. The UPS should be have a minimum standardization of ISO 9001:2008 or above.
METALLIC ENLOSURE ISOLATORS Supply, installation, Testing & Commissioning of following type of isolator, in enclosure made up of 1.6mm thick CRCA sheet, pretreated in seven tank process, powder coated with paint thickness not less than 100 micron ( Shade RAL 7032 ). Cable end box shall be provided for incoming and outgoing cable
32A DP isolator
32A 4P isolator
25A 4P isolator
25A DP isolator
DISTRIBUTION BOARDS
DISTRIBUTION BOARD ( DB ) Supply & Erection of 12 way single phase double door with angle frame,Incoming/out going suitable adapter box (cable end box) bold & nuts and angle fastener with earthing. Cost should include chipping,removing debris, repacking with cement mortor,curing Complete Work. Incoming : 32A DP MCB - 1 No 32A DP RCCB 30mA - 1 Nos Outgoing : 6A SP MCB - 10 Nos (EX DB - 1,2 & LDB -5)
DISTRIBUTION BOARD ( DB ) Supply & Erection of 16 way single phase double door with angle frame,Incoming/out going suitable adapter box (cable end box) bold & nuts and angle fastener with earthing. Cost should include chipping,removing debris, repacking with cement mortor,curing Complete Work. Incoming : 32A DP MCB -1 No, 32A DP RCCB 30mA - 1 Nos Outgoing : 6A SP MCB - 8 Nos (LDB-4)
DISTRIBUTION BOARD ( DB ) Supply & Erection of 4 Way / 8 way / 12 Way Vertical TPMCB sheet steel distribution boards Flush type/Surface type fitted with Bus bars and Neutral links with single / three phase MCB out goings and separate 4 way provision for accommodating one No. 4 pole incoming MCB / Isolator and another separate 4 way provision for accommodating one No. 4 pole ELCB/ RCD with label holder and provisions for taking up cable for size not less than 35 sq.mm
4 Ways 3 Phase DB
8 Ways 3 Phase DB
12 Ways 3 Phase DB
6 Way Vertical TPN Distributions boards; IP43 with double door (Metal); with 12 module incomers and 18 Single Phase/Three Phase/ MCB's outgoing
DIESEL GENERATOR
Supply, Transportation, erection and commissioning (Excluding Foundation) of 3 Phase, 415, 50Hz, water cooled multi cylinder diesel generator set with alternator of 62.5KVA/ 50KW out put contineous rating directly coupled Engine and Alternator with guard and mounted on a common base plate of Robust construction and complete IP-52 protection, Acoustic Enclosure as per CPCB norms , sound absorbing material,to restrict sound level up to 75 dB up to 1 mtr distance and as per CPCB norms with AMF Panel
POWER CABLES
Supply, laying, termination, testing and commissioning of following sizes of 1.1 KV PVC insulated Aluminium/Copper conductor armoured cables laid on overhead cable trays or over MS supports in masonry trenches including providing required Glands and Lugs & MS supports and clamps for fixing to supports in an approved manner complete as required and as per specifications.
LT CABLES
31/2 core 240 sq.mm. UG Aluminium Armoured Cable
31/2 core 185 sq.mm. UG Aluminium Armoured Cable
31/2 core 150 sq.mm. UG Aluminium Armoured Cable
31/2 core 95 sq.mm. UG Aluminium Armoured Cable
31/2 core 50 sq.mm. UG Aluminium Armoured Cable
31/2 core 25 sq.mm. UG Aluminium Armoured Cable
4 core 16 sq.mm. UG Aluminium Armoured Cable
4 core 10 sq.mm. UG Aluminium Armoured Cable
4 core 6 sq.mm. UG Aluminium Armoured Cable
LT cable Terminations
For 31/2 core 240 sq.mm. UG Aluminium Armoured Cable
For 31/2 core 150 sq.mm. UG Aluminium Armoured Cable
31/2 core 50 sq.mm. UG Aluminium Armoured Cable
4 core 16 sq.mm. UG Aluminium Armoured Cable
4 core 10 sq.mm. UG Aluminium Armoured Cable
4 core 6 sq.mm. UG Aluminium Armoured Cable
SUBMAINS/CIRCUIT MAINS /POWER WIRING
Wiring with 2 of 1.5sqmm(22/0.3) PVC insulated Single core multi strand fire retardant flexible copper cable with ISI Mark conforming to IS:694/1990 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with M.S metal box with front plate, with modular type 5A switch. for light fixture point/Fan/Bell.
Supply and run of 2 of 1.5 sqmm (22/0.3) PVC insulated Single core multi strand fire retardant flexible copper cable with ISI Mark conforming to IS:694/1990 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling.
Supply and run of 2 of 4 sqmm (36/0.3) PVC insulated Single core multi strand fire retardant flexible copper cable with ISI Mark conforming to IS:694/1990 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling.
Supply and run of 1 no.of 1.5 sqmm wire for earth connection.
POWER POINTS
Supply, Fixing of 5A 3pin and 2pin combined Modular type wall socket with 5A Modular type switch concealed in suitable MS box including connections
Supply, Fixing of 5A/15A 3pin combined Modular type wall socket with 15A Modular type switch concealed switch concealed in suitable MS box including connections.
Supply, Fixing of 15A 3pin Modular type wall socket with 15A Modular type switch concealed switch concealed in suitable MS box including connections.
Supply and fixing of 25Amps DP Plug and Socket in sheet enclosure with 25A DP MCB in flush with wall with earth connection (For AC Plug) [ ISI marked / Reputed make]
Supply and fixing of Ceiling Rose
PVC CONDUIT
Supply and Laying of 1.8 mm thick PVC rigid conduit with all the required accessories like collars,bends, junction boxes, etc., complete.
20 mm dia conduit.
25 mm dia conduit.
32 mm dia conduit.
LIGHT FIXTURES
Supply, Installation, Testing and commissioning of following lighting fixtures with all the accessories to complete the system to function.
24 W LED recessed light
18W Wall Light
60W Ceiling fan
60W Wall mounted fan
45W Exhaust fan
Supply of LED Flood light 150W with intergrated Driver
CABLE TRAY
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
150 width x 50 depth x 1.6 mm Thickness
300 width x 50 depth x 1.6 mm Thickness
EARTHING
Supply and insallation maintenance free GI Earthing System comprising of 50mm dia and 2 mtr. long earth electrode of low carbon steel rod with 100 micron bonding and 25 kgs. of carbon based environment friendly backfill compound and suitable clamp
Supply and run of 25mm x 6mm AL strip on surface or in recess for connections etc. as required.
Providing and fixing 8 SWG dia CU. wire on surface or in recess for loop earthing as required.
Supply and run of 25mm x 3mm Cu strip on surface or in recess for connections etc. as required.
CCTV SYSTEM
Supply,installation,configuring,programming,customizing ,testing and commissioning of 1/2.8" 2MP progressive scan CMOS auto iris,1920x1080 @ 30fps with POE ,Defog which supports H.265+/H.265/H.264+/H.264 MJPEG video compression and should have IR anti-reflection window,lighting protection,surge protection,anti static protection and IR range upto 15M.
Supply,installation,configuring,programming ,customizing ,testing and commissioning of 16 channel 160Mbps NVR with 1920x1080 resolution,pluggable HDD's upto 2SATA Harddisks,supports HDMI/VGA output,ANR techmology,RJ-45 self adaptive ethernet interface with optional LCD display
Supply,installation,testing and commissioning of Cat 6 Cable
Hard Disk 4TB-SATA
Supply,insatallation,testing and commissioning of I/O with camera back box.
Supply,installation,testing and commissionong of 32 inch monitor SAMSUNG make or equivalent LFD (large format display) with HDMI
Supply,installation,testing and commissining of 24 port switch with all the accessories.
Supply,installation,testing and commissining of 24 port patch panel with all the accessories.
Supply,installaton,testing and commissioning of 36 U rack with all the accessories.
DATA WIRING
Supply,installation, Testing & commissioning of Data outlet box with cover plate, metal box and data socket, Anchor Roma or equivalent with terminations.
Supply,installation,testing and commissining of 24 port switch with all the accessories.
Supply,installation,testing and commissining of 24 port patch panel with all the accessories.
Supply,installation,testing and commissioning of Cable Manager.
Supply,installaton,testing and commissioning of 12U rack with all the accessories.
Supply,installation,testing and commissioning of Cat 6 Cable
TV SYSTEM
Supply of all materials and fixing of coaxial modular TV sockets, recessed FRP mounting box and front plate for TV sockets and terminating RG6 TV Cable.
Supply and laying of RG-6 Coxial cable with all cabling accessories.
Supply and laying Armoured Co-Axial cable for TV
Supply and fixing of multi adaptor
Supply and fixing of Line/Hybrid Amplifier
Supply and fixing of Ceiling Speaker 20W
Supply and fixing 2 Core - 1.5 sq.mm Unarmoured Speaker Cable
TELEPHONE SYSTEM
TelePhone Jack : Supply, Installation, Testing & Commissioning of wall mounted TelePhone Jack with GI box along with modular base & cover plate for Jack with all fittings & accessories.
Supply, installaton, testing and commissioning of 40 pair Krone Connector Box.
Supply,installaton,testing and commissioning of 20 pair Krone Connector Box.
Supply,installation,testing and commissioning of 50 pair jelly filled armoured Telephone Cable.
Supply,installation,testing and commissioning of 20 pair jelly filled armoured Telephone Cable.
Supply,installation,testing and commissioning of 2 pair unarmoured Telephone Cable.
Lightning Arrestor:
The ESEAT has corrosion resistant stainless chrome body made up of AISI 316 grade of height 0.50 metres capable of working in hazardous atmosphere. The Air terminal is non-radioactive and requires no special licensing. The unit is fully autonomous (no battery, no external power supply is required), collects energy from the ambient electric field.The ESEAT model has been tested in a high voltage laboratory in accordance with NFC 17 102 in order to measure the average gain in triggering. The average gain in triggering time (?Ts) obtained during the lab test for the offered model is 60 µs. The ESEAT works on negative as well as positively polarized discharges. ESEAT has been tested for such discharges in Central Power Research Institute (CPRI). A dedicated tester is avilable to test the healthiness of the ESEAT on request (Page No.37, Point No. 3 of Clause 8.6 of the Revised NFC 17-102 version 2011 ). ESEAT Model : L - Radius of protection : 86 Metre
MOUNTING STRUCTURE: Supply of standard/ Special Mounting Structure of height 4.5 Mts Pipe and 300 x 300 x 8mm MS Plate, 3 Mts. 48mm OD classC GI Outerpipe, 1.8m, 3.8mm OD inner pipe, for roof mounting on concrete
Down Conductor: Supply and run of 25mm x 6mm x GI Flat Down conductor with necessary clamps/ supports on wll/ floor/ ground for earth connnection
Test Link: Supply of test link box for each down conductor inorder to disconnect the earth termination system to enable measurement of resistance
Earth Electrode: Supply and installation maiintenance free GI earthing system comprising of 50mm dia and2mtr long earth electrode of low carbon steel rod with 100 micron bonding and 25 kgs if carbon based environmental friendly backfill compound and suitable camp
Surge Protection: Supply and installation cabinet type class 1 and 2 combined model SPD to rrest surges and over voltages in the power line due to lightning switching action etc. they must be installed in the incoming MCC Panel/ DB of the respective building in parallel to the power circuit. Model PSV4-12.5/400TT (3 phase power network)
LIFT ARRANGEMENTS
Supply, installation, testing & commissioning of 8 Passenger Lift (W/o Machine Room)
Supply, installation, testing & commissioning of 15 Passenger Lift (W/o Machine room)
COMMON AMENITIES
Supply, Installation, Testing and Commissioning of 12 meter Mini mast Lighting with 8 Nos of 2 X 150 W LED fitting etc., Complete.
Design,supply and Installation , test , commissioning and five years comprehensive operation and maintenance of roof top Solar PV systems on grid including applicable all taxes a. facilitating net metering from TANGEDCO (Tamil nadu Generation and Distribution Coropation Limited) and Capital incentives approval from MNRE,Minestry of new renewable energy,Government of India. b.Design,supply Installation Testing and Commisioning of roof top Solar PV systems (On Grid)shadow free Rcc roofs Specification as per the tender condition in the Bid Document. C.obtaining Chief Electrical inspectorate to Government(CEIG) approval. d.Five(5) years comprehensive Operation and Maintenance. (Excluding liason Work)
Supplying and Fixing of LED Scrolling Display - P10 - Single Colour RED - 1 sq.ft, Display Size:10.5ft (3200mm) x 4.2ft (1280mm), P10 LED module, RED colour, MS Panel, Programmable via USB or LAN, Over 100 animations and graphics options, [V-SRV-004] Fabrication and installation service package - This package indicates the fabrication work and commissioning charges for the respective products which includes Material charges for the fabrication work, Labour charges for the fabrication work, Installation and commissioning engineers consultation and planning charges, Site survey specific to installation
Supply of solar street light system consisting of 80mm GI pipe IS 1239 ISI 'B' Class, 6 Meter Height Pole with 225x225x10mm bottom plate, M16x450 mm length foundation bolt, panel frame, light arm, battery stand, battery cover, 125watts poly crystalline panel, 65AH VRLA SMF battery including erection and commissioning. 2C x 1.5 sq.mm Multitranded PVC insulated flexible cable for internal wiring
Transformer Sub Station related Works
500 KVA, 22 KV / 433 V Outdoor Oil Cooled Transformer with off Circuit (As per IS 1180-Level 2)
Prepartion of CEIG Drawings, obtaining approval and safety certificate including submission of completion report and rectification report
Supply, delivery of 6 pole structure materials with suitable Size RSJ along with all structure material are as under. For 22KV Sub Station
Construction of a transformer plinth
Chain link fencing with gate including the TNEB 2 poles Spreading of materials as per CEIG requirements
Transformer Yard earthing using thin copper flat and twin earthing as per IS for above 250KVA transformer Sub station
Transformer Sub station erection charges
MISCELLANEOUS ITEMS
Electrical gloves tested to 11 KV /22 KV with wooden box dusted with french chalk powder
Electrical quality 6mm thick rubber mat
5 kg capacity ISI marked Dry chemical powder fire extinguisher
Fire Bucket-3 Nos Hooked to MS stand
Laminated shock treatment chart
Wooden First Aid Box
Rechargeable Emergency lamp( 600mm fluorescent lamp)
Earth Discharge Rod (3 Nos. -RYB)
Security Cabin Frame: MS section frame. Roof: PPGI insulated sandwich panels. Walls: PPGI insulated sandwich panels. Flooring: 15mm cement fiber board with Vinyl sheeting. Base Frame: MS grid frame, raised from ground by 4". Electrical: 1 internal tubelight, 1 external bulb & 1 internal fan point. Windows: Aluminium with sliding/openable glass and rain cutter. Door: PPGI panel door. Paint: Pre-painted White/Ivory/Blue combination.
Toll Booth Material Mild Steel + Insulated Sheet Size Customized Built Type Prefab Shape Rectangular Color White Surface Treatment Customized Weight 400 - 500 Kg
Police/Security Kisok One counter Top, ACP false celling One exhaust fan, one tube light one small and two power point for mobile charging 12 backlit advertisement panels with inbuilt tube lights Made of Stainless Steel SS-304 and SS-202 grade Civil/footing/footing work in client scope as per site and choice
Supplying and Fixing of SS (Stainless Steel) Airport Chair - Made from top quality perforated Crc Sheet having thickness in the range of 1.2mm to 1.6 mm & then surface treated & powder / enamel coated, Arms/legs - 1.2 mm thickness steel, Crc steel & chrome plated,Made from top quality steel after precise pressing and welding with powder coating. 40*80cm , 2.0mm thick tubular steel; size of 1800*660*810 mm (3 Seater) with Gross Weight : 32kg, Beam and Supporters Steel with Black Powder Coating
PLUMBING WORK
Supply and Delivery and Fixing of 250 Lit Capacity Wall-mount cum Counter-top water purifier.2. Reverse Osmosis Technology.3. Anti-bacteria 3-in- 1 Silver Doser, Taste Conditioner and Activated Carbon as post treatment of RO, to enhance the shelf life & taste of water.4. No of Stages: 6 (1+5). 5. Purification Capacity: Up to 25 lph† .6. Optional storage tank of capacity: 7 ltrs.7. Built-in SMPS to operate from 120~280 V AC for erratic voltage supply.8. Can Attach with Water Cooler or Dispenser.9. Dimensions: W 335 D 235 H455 Following Specification(1) Purification capacity- 20*(+/- 5) Litres per hour *(2) Max Duty Cycle- 250 liters per Day (3) Storage Tank Capacity- 7 Litres (optional at extra cost) (4) 6 stagesPurification -1) Sedement , 2)Activated Carbon 3)Sediment, , (4)RO Membrane,(5)Post Corbon, 6) TDS Minimiser,5) RO Membrane-2 Units (6) Minimum Inlet Water Pressure -0.3 kg/sq cm (7) Maximum Inlet water Pressure -2 kg/sq cm.
Supplying and fixing in position of Indian make Colour glazed earthenware WASH HAND BASIN of size 550x400mm with a pair of C.I. Brackets, 15mm dia C.P. Pillar tap, 32mm G.I. Waste water pipe, 32mm dia C.P. Brass waster coupling, plug with chain, 15mm dia PVC connection, 15mm G.M. wheel valve with ISI mark and necessary G.I. union and G.I. Elbow, including fixing wash hand basin in position with white lead, clamps, teakwood plugs, screws, rubber washer etc., complete without any leakage complying with standard specification.
Supplying and fixing in position of Indian make Colour glazed earthenware Lipped mouth porcelain flat back urinal with all accessories such as 32mm dia bell mouth PVC connection, 15mm dia GM wheel valve, 15mm dia "B" class GI waste water pipe, 15mm dia nylon connection, 15mm dia bass nipple etc., and re joining the same to the original condition without any leakage etc., complete complying with standard specification.
Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with 'P' trap or 'S' trap confirming to IS:2556 - Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers.
Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws etc., complete
Supply and fixing of Stainless Steel Health Faucet including cost of materials and labour charge etc. Complete as per standard specification.
Supplying and fixing in position of 150mm x 100mm square mouth 'P' or 'S' trap stoneware Gully Trap Agrade with cast iron Double Gratings of size 150x100mm with C.I Air tight cover with frames of size 300 x 300mm at bottom and top respectively laid over a bed of 150mm thick brick jelly cement concrete 1:3:6, using 40mm size brick jelly including dismantling masonry wherever necessary and redoing the damaged portions to the original conditions and by using cement concrete 1:3:6 using 20mm HBG metal / jelly for fixing the gully trap and giving connections to the stoneware sewer line etc., complete complying with standard specification.
Supplying and fixing in position of 110mm x 75mm C.I Nahini / Floor Trap with best stainless steel Grating with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 [one part of lime two parts of sand and five parts of 40 mm size broken jelly] and finished with cement mortar 1:3 [one cement and three sand] including dismantling masonry works wherever found necessary and making good the damaged portions to the original condition and giving connection to the cast iron pipe as directed etc., complete complying with standard specification.
Construction of Inspection Chamber of 0.60m X 0.60m X 0.60m clear size including earth work excavation, base concrete of 50mm thick CC 1:5:10, 11.50cm thick brick work in cement mortor 1:5 using best quality second class ground moulded bricks of size 9" x 4½" x 3", Inner, top and outer sides should be plastered with CM 1:3, 12mm thick and 50mm thick wearing coat 1:3:6 using 20mm metal should be laid over the inner flooring and the top covered with 50mm thick precast slab etc., complete complying with standard specification.
Supplying and fixing of PVC Screw down tap heavy type 15 mm dia of approved make conforming to ISI specification and quality including cost of shellac, thread etc., complying with standard specification including cutting and threading wherever necessary
Supplying and fixing of best and approved quality of Brass Chromium Plated Soap tray of size 150mm x 100mm including cost of teak wood plugs brass screws etc., complete complying with standard specification
Supplying and fixing in position of PVC / Fibre glass framed 5.5mm thick MIRROR of approved brand and size of 600mm x 450mm fibre glass shelf type with necessary hard board backing etc., complete complying with standard specification.
Supplying and fixing in position of Steel Fibre Reinforced Concrete (SFRC) of size 600mm x 600mm with best approved quality etc., complete as per standard specification.
Internal Water Supply - P.V.C. Pipes (10Kg/SqCm) Supplying laying and jointing P.V.C pipes (6Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges.
25 mm dia Pipe 10 Kg/ cm2
20 mm dia Pipe 10 Kg/ cm2
Supplying, laying and jointing of PVC pipes of approved quality EQUIVALENT conforming to ISS and with ISI mark of various diameter for building external water supply above ground level including cutting, threading and fixing PVC specials but excluding cost of such specials and fixing to wall with necessary teakwood plugs, PVC clamps and screws, making good the dismantled portions to original condition with necessary brickwork and plastering wherever necessary with necessary scaffolding charges etc., complete as per standard specification. Above Ground Level
63 mm dia Pipe 6 kg/ cm2
50 mm dia Pipe 6 kg/ cm2
40 mm dia Pipe 10 kg/ cm2
32 mm dia Pipe 10 kg/ cm2
Supplying, laying and jointing of PVC pipes of approved quality EQUIVALENT conforming to ISS and with ISI mark of various diameter for building external water supply below ground level including cutting, threading and fixing PVC specials but excluding cost of such specials and fixing to wall with necessary teakwood plugs, PVC clamps and screws, making good the dismantled portions to original condition with necessary brickwork and plastering wherever necessary with necessary scaffolding charges etc., complete as per standard specification. Below Ground Level
160 mm dia Pipe 6 kg/cm2
110 mm dia Pipe
75 mm dia Pipe
50 mm dia Pipe 6 Kg/cm2
40 mm dia Pipe 10 Kg/cm2
32 mm dia Pipe 10 Kg/cm2
Providing and fixing of PVC Rain water downfall pipe of 110mm dia 4kg/sq.cm with necessary teak wood clamps etc., complete complying with standard specification.
Supplying and fixing in position first quality and approved variety of 32mm G.M. GATE VALVE (Heavy Duty) with ISI mark including cost of Shellac, thread etc., including labour for cutting and threading of G.I. pipes etc., complete complying with standard specification. (For both internal and external water supply arrangements.)
Supplying of following PVC. SPECIALS of best approved quality conforming to ISS etc. complete complying with standard specification.
32x25mm reducer
25x20mm reducer
32mm dia coupling
32mm Tee
32mm Elbow
32mm Union
25mm Elbow
25mm Union
75 mm plain bend
75 mm dia tee
75 mm dia door tee
110mm dia plain bend
110mm dia PVC cowl
Supply and delivery of the 40mm dia OHT flow control valve with female BSP treaded ends, (20mm length) with Stainless Steel Body as per ANSI 202 Grade, Plug, Flange – Nylon 66, (to be tested at NABL accredited lab.) Triangular notch type flow control path with opening reference scale arrangements for flow notch and Upstream & Downstream pressure checking spring loaded mouth arrangements. Working Pressure 10 KSC, (FCRI, Palgaut pressure test and flow test to be furnished) and with 5 years warranty
Supply and Deleivery of 50mm DI Pressure Reducing Valve (PN10/16) with the function to reduce downstream pressure to set point irrespective of upstream fluctuations. The downstream pressure set point can be changed as per the requirement. “Manufacture supply and delivery of DI D/F Diaphragm type own medium controlled Pressure Reducing valve with cast body of ductile iron grade GGG-40 or equivalent grade or as per IS 3896-Part-2-1985 customized control cylinder for linear control behaviour or equivalent, performed diaphragm and pull out safe profile sealing ring of EPDM, threaded inserts (CORFIX - to prevent the coating from coming off in the connections area as well as corrosion and incrustations in the control circuit) or equivalent. 2 pressure gauges for operator-friendly control to determine the actual inlet and outlet pressure connected directly to the valve
Supply and delivery of 50mm DI Pump control Valve (PN10/16) with the function to open / close the pump discharge to the downstream network gradually the start-up / shut-off of a pump to protect the pumping assembly. “Manufacture supply and delivery of DI D/F Diaphragm type own medium controlled Pump Control Valve with cast body of ductile iron grade GGG-40 or equivalent grade or as per IS 3896-Part-2-1985 customized control cylinder for linear control behaviour or equivalent, performed diaphragm and pull out safe profile sealing ring of EPDM, threaded inserts (CORFIX - to prevent the coating from coming off in the connections area as well as corrosion and incrustations in the control circuit) or equivalent. Flange connection dimensions according to EN 1092, Part 2/ ISO 7005[DIN]/ IS 1538, all parts (Epoxy coating, and diaphragm) in contact with medium are as per KTW and DVGW certified (harmless)/WRAS & NSF approved. The EPDM rubber & Epoxy coating (EP-P) should be approved by W270.
Supply, delivery and erection of Woltman model with removal mechanism water meters (Bulk type) with dirt box conforming to ISO 4064 part I, II, III Class B and IS-2373 with life cycle test certificate from FCRI/ NABL accridiated lab. The watermeter shall have magnetic drivers or mechanical drivers and shall be versatile for installation in any position. The meters shall be hydrodynamically, hydrostatically balanced. The runner, runner chamber, pointers of the meter shall be as per ISO 4064 specification. Dry dial excavated counter housing fully protected against flooding ensuring easy reading in all climates.
Supply and fixiing of 50mm GM Non return Valve
Supply and delivery and fixing of 5000 Litre capacity HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading etc.
Supply and delivery and fixing of 1000 Litre capacity HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading etc.
Supplying & Erection of Pumps
Supply and delivery of 300lpm x 40m (5 HP) head Open well Submersible pump set conforming to IS 14220/2002 and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze mixed type impeller, CI FG 200 grade casing and brass screws and rotor shall be of copper rod as per IS 613/1984 with ISI mark. The pump suitable for installation in sump with 1.1KV grade 3 core suitable copper flat submersible cable to a length of 15m with necessary cable joints. The non-return valve located at the top of the pump in the discharge outlet connection is to be designed with minimum friction. The pump should be directly coupled to 2880 RPM, three phase, 50 Hz (±5), 415V+6% & 415V-15% squirrel cage induction motor suitable for DOL upto 5 HP, Fully Automatic Air break Star Delta up to 20 HP and Auto Transformer starter for above 20 HP starting and for continuous operation.
Supply and delivery of 350lpm x 75m head (10 HP) Supply and delivery of clear water vertical wet type submersible pumpset suitable for 150mm dia borewell conforming to IS 8034/2002 as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continous rated two pole suitable wet type vertical squirrel cage induction motor as per IS9283 /1995 as amended there after, suitable for operation in AC three phase 415 V+/- 10 %, 50 HZ +/- 5
Labour charges for the erection of (upto 5 HP) submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.
Labour charges for the erection of (For 10 HP) submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.
Supply, delivery and erection of submersible centrifugal sewage non-clog pumps having a discharge of 20 M3/hour to 100 M3 /hour at 10m upto 15m head, vertical spindle type pump , wear resistance with submersible motor for the various duty conditions. Pump shall be capable of handling min 100 mm solid size with sewage specific gravity of up to 1.05. Pump shall be of robust construction, Liquid passages shall be finished smooth and designed as to allow free passage to solids. Pump Impeller should be of Non-clog semi open type , single vane / multi vane preferably contra bloc or vortex impeller design. Double mechanical seal with silicon carbide faces should be provided to protect the motor from ingress of sewage along the shaft. The critical speed of the rotor shall be at least 30% above the operating speed. Pumps should have double bearings between the pump & motor. The bearings life shall be minimum 100,000 hrs of operation with greased for life.
Supply, delivery and fixing of 80mm DI Pump control Valve (PN10/16) with the function to open / close the pump discharge to the downstream network gradually the start-up / shut-off of a pump to protect the pumping assembly. “Manufacture supply and delivery of DI D/F Diaphragm type own medium controlled Pump Control Valve with cast body of ductile iron grade GGG-40 or equivalent grade or as per IS 3896-Part-2-1985 customized control cylinder for linear control behaviour or equivalent, performed diaphragm and pull out safe profile sealing ring of EPDM, threaded inserts (CORFIX - to prevent the coating from coming off in the connections area as well as corrosion and incrustations in the control circuit) or equivalent. Flange connection dimensions according to EN 1092, Part 2/ ISO 7005[DIN]/ IS 1538, all parts (Epoxy coating, and diaphragm) in contact with medium are as per KTW and DVGW certified (harmless)/WRAS & NSF approved.
Supplying & Errection of Sewage Treatment Plant
BAR SCREEN with 8 mm spacing
Coarse Bubble Diffusers Size: 80 mm dia x 800 mm long Type - Tublar MOC: PVC Make: EPDPM Membrane/ S. Cogen
Fine Bubble Diffusers Size: 90 mm dia x 800 mm long Type Tublar Make: EPDPM Membrane/ S. Cogen
Raw Effluent Pumps Duty: 10 cum/hr @ 10 m head TYPE: Vertical, Submersible, Non clog Make Kirloskar
Filter Feed Pumps Duty: 10 cum/hr @ 35 m head TYPE: Horizontal, Centrifugal, Non clog Pump Make: Kirloskar
Air Blowers (For SBR Tank) Type: Twin lobe Flow Rate - 150 Cum/hr Operating Speed 1440 rpm Operating pressure 0.5 kg/cm2 Make USHA
Sludge Transfer Pumps Duty: 4 Cum/hr at 10m Headd Type" Vertical submerssible, Non Clog Make - Kirloskar
Hypochlorite Dosing Pump capacity: 0-5 lph Dosing Tank = 100 lts Type HDPE, LMI Asia
MS Pressure Sand Filter Duty: 10 Cum/hr Type: Vertical, Cylinder Size 800mm dia x 1200mm Media Graded Sand and pebbles
MS Activated Carbon Filter Duty: 10 Cum/hr Type Vertical Cylinder Size 800mm dia x 1200mm HOS Media: Activated carbon, gravels and pebbles
Filter Press Size: 470mm x 470 mm with 10 plates Make: precision/Hydopress
Screw Pump Duty: 1 cum/hr @ 60 m head Type: Horizontal, screw pump with SS rotor & stator for pressure pumping Make Kirloskar
Manual Decanter Valve Interconnecting piping, fitting & valves MOC: GI/PVC
Type: Powder coated, CRCA, 16 gauge sheet, weather proof, cubicle type, floor mounted.
Function: Manual
Electrical Cabling work
Instrumentation: Float switches,
a) Flow indicators
b) Level switches / controller
c) Pressure guages
Erection & Commissioning Charges for STP Arrangements
Rain Water Harvesting Structure
Providing rain water harvesting using 3 No.of RCC well rings of 90cm inner dia (clear) with 5cm wall thickness made out of cement concrete 1:2:4 using 20mm hard broken jelly to a height of 30cm each supplying and fabricating 16 No. of 6mm dia MS rod vertically and 3 No. of 6mm dia MS rod circumferentially tied together with 18 guage binding wire for well rings including necessary earth work excavation 1m dia to a depth of 1m, supplying and filling 40mm HBG inside the erected well ring to a depth of 90cm, and top covered with RCC circular perforated cover slab of 1m dia and 5cm thick which inclusive of cost and fabrication of 6mm M.S reinforcement at 15 cm spacings on both directions and one 6mm M.S rod ties at the edge of the slab circumferentially including cost of moulding, curing, finishing and well placing in position and disposing off excavated earth with all initial leads and lifts in places as shown by the Departmental officers etc., complete in all respects.
BT ROAD WORK
Earthwork excavating for Sectioning and Levelling and depositing on bank with initial lead of 10m & initial lift of 2m in Sand, Silt or other Loose Soil, Wet Sand or Silt not under water, Light Black Cotton Soil, Sandy Loam and Ordinary Soil including excavated earth etc., complete complying with standard specification (SS20B).
Providing of Granular Sub base using Grade I materials of table 400 -1 of Morth with minimum CBR 30 spreading in uniform layers with motor grader on prepared surface, mix in by place method at OMC and compacting with Vibratory Roller to achieve the desired density including all labour charges etc, complete as per technical specification and as directed by the departmental officers. Morth - IV No. 111,112,401,900
Providing and laying ,spreading and compacting graded stone aggregate to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications.
Providing and laying Prime coat of 7 kgs/10 sqm over the WMM surface treated with primer using 7 kgs of bituminous Emulsion for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as prime coat manually etc., complete as per 502 of MORTH Rev V Specifications.
Providing and laying Tack coat of 2.5 kgs/10 sqm over the Prime surface treated with binder using 2.5 kgs of bituminous Emulsion for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev V Specifications.
Providing and laying 75mm consolidated thick Dense Bituminous macadam using 0.40cum of 37.50-13.20mm,0.35cum of 13.20-2.36mm and 0.36cum of 2.36mm & below size IRC metal with 71.30kgs of VG30/VG40 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to the required temperature and mixing the minimum required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 75mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonne Vibratory / Pneumatic Roller to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for 20-30t CMP with bitumen boiler, tipper trucks, Paver Finisher / 9m paver finisher, Vibratory / Pneumatic roller and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 505 of MORTH Rev-5 specifications.
Providing and laying Bituminous concrete to 40mm thick using 0.13 cum of 19.00-9.50 mm graded metal and 0.17 cum of 9.50-2.36 mm graded metal and 0.26 cum of 2.36 mm & below metal with 45.27 kgs of 60/70 bitumen & 5.03Kg of Plastic waste (Total-50.30 kg) and for premixing per 10 sqm including cost and conveyance of all materials to C M P site, heating the bitumen and agregates to required temperature and mixing them in required temperature in central hot mix plant 20- 30 tonnes capacity conveying the mix by tipper trucks to paver site, spreading the mix in required temperature for uniform thickness of 40mm / 30mm with mechanical paver to the specified grades and cross sections and compaction by Vibratory roller to the required density etc., including labour charges for loading bitumen in to bitumen tank and metal to feeder unit,labour for attending to paver site etc., including hire charges and fuel charges for 20-30t C M P with bitumen boiler,tipper trucks, paver finisher, Vibratory rollers and all other tools and plants required,including all other incidental charges etc.,complete using C M P clause 507 of MORTH Rev-5 specifications.
Providing and Laying of hot applied thermoplastic compound 2.5mm thick including reflecting glass beads @ 250gsm per Sq.m area thickness of 2.5mm is exclusive of surface applied glass beads as per IRC 35. The finished surface to be level, uniform and free from streaks and holes etc., complete. (as MORT & H specification No. 803).
Add GST @ 18%
R R THULASI BUILDERS INDIA P LTD
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid