80870 Special Repairs to Building No P 67 at vijay baugh under GE Haddo Port Blair

Amount

Dismantling floor, hearth or wall tiling including CM bedding, removing rubbish off the premises complete all as specified and as directed.

M&L for vitrified tiles light shade 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white/ coloured cement, laid over and including cement screed bed 15mm thick in cement mortar 1:4, complete all as specified.

All as per item No 02 above but as in skirting / dados etc. including backing coat 10mm thick in cement mortar 1:3, complete all as specified.

M&L for vitrified tiles light shade 10mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white/ coloured cement, laid over and including cement screed bed 15mm thick in cement mortar 1:4, complete all as specified.

All as per item No 04 above but as in skirting / dados etc. including backing coat 10mm thick in cement mortar 1:3, complete all as specified.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tiles exc 0.06 Sqm but n. exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed of CM (1:4) bedding complete all as specified

M&L for glazed ceramic designed coloured tiles as in vertical surfaces of size 300x450x7 to 8mm thick set and jointed in neat cement slurry and pointed in coloured cement to match designed incl 10 mm thick backing coat in CM (1:3) complete all as specified.

M & L PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) 25mm thick as in levelling course, sub-floors and paving etc complete all as specified.

Demolition of cement concrete un-reinforced in any position and paving not exc 15cm thick above or below ground level complete all as specified and as directed.

M&L PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in levelling course, floorings, copings and paving etc complete all as specified.

Taking down chowkhats or frames with shutters without taking off shutters from frame exe 1.5 Sqm and n.exc 4 Sqm each

Taking down chowkhats or frames with shutters without taking off shutters from frame n exe 1.5 Sqm each

S&F Solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube, fixed in opening as per specification complete all as specified and as directed.

S & F for Factory made solid PVC moulded with particle board core door shutter 28 to 30 mm thick (style) with 2,4 or 6 raised panel design with 2mm thick molded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing all as specified

S&F Butt hinges extruded aluminium alloy with galvanized mild steel hinge pin ,anodized of hinges 100 mm type B-21

S&F extruded aluminium alloy handle fabricated type anodized 150mm long.

S&F Aluminum anodized barrel tower bolt of extruded section 150mm long

S&F Aluminum alloy anodized sliding door bolt 300mm long with hasp and staple (bolt type) and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy

S&F for powder coated aluminium shutters of sliding/ openable/ fixed/ fully glazed/partially glazed/fully gauge/ Skelton door/ window and ventilator frame etc., with glass or gauge and panels with prelaminated particle board inserts, side hung type, without sash bars, using standard aluminium sections including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, roller for sliding windows, locking arrangement, anodized aluminium fittings such as handles, required hinging device etc. complete all as specified and directed.

Supply only aluminium alloy wire cloth,0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples

Supply only plain sheet glass 4.0 mm thick ordinary quality and glazing with aluminum glazing clip in aluminum window shutter not exc 0.5 Sqm in each pane.

S&F of solar control film 25 micron reflective type (garware control or equivalent).

S&F of PVC sheet of 5 mm thick plain colour in strips & channel feathered at the edges for fixing on solid PVC wall lining, insulated PVC wall lining, and solid PVC partitions insulated PVC wall lining and solid PVC partitions inclusive of solvent cement and fixing at site.

Supply only figured glass ,4mm thick,pin head type in squares n exc 0.5 sqm in each pane .

Dismantling of Precast cement concrete block walling built in CM or Cement lime Mortar complete all as specified and as directed.

M&L precast cement concrete block masonry exc. 10 cm width with solid block type C1 (1:3:6) (using 20 mm graded stone aggregate) and setting in cement mortar (1:6) all as specified.

M&L precast cement concrete block masonry or slabs 10cm thick ( with plain or interlocking joint as directed) complete in walls type C1 1:3:6 (using 20 mm graded stone aggregate) and setting in cement mortar (1:6) all as specified.

Taking down cement plaster on brick /stone masonry / concrete surfaces of wall / ceiling incl raking out joints, hacking for key, scrubbing down with water etc and deposited the debris outside the MD land complete all as specified.

M&L for 10mm thick plaster in CM (1:6) on fair faces of concrete/PCC block surfaces of walls finished even and smooth (without using extra cement) all as specified.

M&L for rendering in two layer i.e.5mm thick in CM 1:4 including mixing water proofing compound over 10mm thick in CM (1:6) on concrete/block masonry surfaces and finished even and smooth without using extra cement all as specified. Note : WPC shall be measured and paid separately.

Supply only water proofing compound.

M&L for preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over one coat of primer including leveling the surfaces where undulation found with cement putty etc complete all as specified and directed.

M&L for preparation on newly plastered wall surface and applying two coats of weather proof exterior grade paint over a coat of primer all as specified.

M&L for complete removal of existing treatment on wall by scrapping, washing, cleaning etc and applying two coats of oil bound distemper over one coat primer including filling of cracks, holes and including leveling the surface where undulation found with cement putty etc. all as specified.

M&L for preparation of wall surfaces and complete removal of existing treatment by scrapping, washing, cleaning etc and applying two coats of weather proof (exterior grade) paint over a coat of primer incl crack filler in cracks where required all as specified.

S& F in repairs 20mm dia, Harrison rails, anodized aluminium alloy with fixing curtain brackets, stops, rollers etc

S & F in repairs vitreous china ware wash basin white Table top basin, flat back size 165 X 580 X 450 mm including 32 mm CP waste coupling, chain and plug, waste fittings, PVC connection of 450mm long, union and waste pipe 32mm dia or required length and all necessary inlet, out let connections complete all as specified.(Make Jaquar Cat No. JDS-WHT-25907N)

S&F in repairs 15 mm bore pillar taps, long neck with aerator 15 mm dia as approved. (Make Jaquar Cat No. ALI-85001) complete all as specified.

S & F in repairs bib taps with wall flange 15mm dia as approved (Make Jaquar Cat No. ALI-85037) complete all as specified

S&F in repairs Angular stop cock with wall flange 15 mm dia with PVC connecting pipe 15mm bore with PTMT nut as approved (Make Jaquar Cat No. ALI-85053)

S&F in repairs Hand shower (health faucet) with 8mm dia & 1.0mtr long flexible tube with wall hook. (Make Jaquar Cat Part No. ALD CHR-585) or equivalent

S&F in repairs brass chromium plated Soap dish holder. Make :Jaquar Code (AQN-7731) or equivalent complete all as specified and directed.

S&F in repairs PVC Flushing wall hung cistern installation kit high or low level including waste pipe bracket etc fixed with wall complete all as specfied and directed (Make Jaquar Cat Pt No WHC-WHT-184A) or equivalent.

Supply and fix in repairs CP grating 100 mm dia complete all as specified .

S&F in repairs two way bib cock cast copper alloy fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shank and cup Make : (Jaquar Cart Part No CAN-FLR -5041 N)

S&F in repairs concealed stop Cock with wall flange incl all fittings complete all as specified and as directed. Make : Jaquar Cat No. CON - 1081 KN

S&F in repairs CP Single Towel Rail 600 mm long Make : Jaquar (AQN 7711) complete all as specified and directed.

S & F in repairs Brass chromium plated towel rack with lower hanger (stainless steel) with hook. (Make Jaquar Cat Part No. AHS-1581H)

S&F in repairs Brass chromium plated tubular towel ring square/round with round flange. (Make Jaquar Cat Part No. ACN- 1121N)

Supply and fix in repairs vitreous china wall hung WC, wash down water closet with seat cover with 'S' or 'P' trap and other connecting items approved brand including fix with white cement complete. (Make-Jaquar Cat Pt No.SLS-WHT-6951 (Couple closet)

S & F in repairs vitreous china squating pan "Orissa Pattern" water closet of size 580 x 440 mm with integral foot rest of 'P' or 'S' trap including provn of lime concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match existing surface complete all as specified and as directed.

S & F in repair PVC valveless syphonic action type flushing cistern 10 ltr capacity white with intel ball valve float flush pipe and handle including brackets complete all as specified.

S & F in repairs vitreous china bowl urinal (top inlet), size 610X345X330 mm white (minimum), with grating and urinal for discharge pipe, complete including providing and fixing plugs, bedding urinal against wall in CM securing urinal to plugs with and incl 60mm long brass screws, pointing around, fixing cistern with brackets, flush pipe grating and union for discharge pipe complete all as specified.(Make : Jaquar Cat No URS-WHT-13257)

S & F in repairs of Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (min wt 60 gms)

Dismantling stone slabs and tiles of any description or thickness in floors, aprons, riser of steps, skirting, dado etc laid in any mortar complete all as specified.

M&L 20mm thick granite stone (of any type ) work (table rubbed and polished) in cooking platform, window cill/jambs, steps, pillers, counter type WHB etc in CM (1:4) incl pointing in white cement (1:2) using marble dust with admixture of cement and pigment to match with shade of granite & pointed in white/coloured cement to match coloured tiles including grinding and rounding (chamfering) to exposed edges of granite slab with mirror polishing complete all as specified and as directed. Note : Colour of granite shall be as approved by Engr-In-Charge.

M&L 20mm thick granite stone (of any type ) work (table rubbed and polished) for wall lining (veenering to wall) 12 mm thick in CM 1:3 & pointing with white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. Note : Colour of granite shall be as approved by Engr-In-Charge.

S&F in repairs PVC connection 15 mm dia and 600 mm long with bolt and nuts complete all as specified and as directed.

Taking up or down 15mm dia steel tubing connection, complete all as specified.

Taking up or down 25mm dia steel tubing connection, complete all as specified.

S & F for 15mm bore unplasticised PVC pipe of pressure ratings 10kgf/Sqcm including all fittings fixed to wall, ceilings and floors etc concealed wherever required & complete all as specified.

S & F for 25mm bore unplasticised PVC pipe of pressure ratings 10kgf/Sqcm with all fittings in concealed manner wherever required fixed to wall, ceilings and floors etc complete all as specified.

Cutting chases in PCC block walls for concealed water tubing etc., and making good, cutting not exc 10 cm girth complete all as specified.

Dismantling of 110mm dia PVC pipes incl bends/branch pieces jointed in cement mortar and taking out all as specified and as directed by Engineer-in-Charge.

S & F for 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified.

S & F for 110mm dia PVC (SWR) bends any radius complete all as specified.

S & F for 110mm dia PVC (SWR) branch piece single (single Y) equal or unequal complete all as specified.

S & F for 110mm dia PVC (SWR) vent cowl complete all as specified.

Dismantling of 75mm dia PVC pipes incl bends/branch pieces jointed in cement mortar and taking outall specified and as directed by Engineer-in-Charge.

S&F for 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified.

S&F for 75 mm dia PVC (SWR) grade bends of any radius

S&F PVC (SWR) branch piece, single (Single Y) of radius equal or unequal, 75mm dia.

S&F PVC (SWR) vent cowl, 75mm dia.

M&L PVC (SWR) multi floor trap in repairs 75mm with grating including jointing with solvent cement complete all as specified.

M&L for low density polyethylene (LDPE) pipes of 32mm dia, pressure rating 6 kgf/sqcm fixed complete to walls, ceilings or in floors etc

M&L for Unplasticised PVC (UPVC) pipes of 32mm dia, pressure rating 6 kgf/sqcm fixed complete to walls, ceilings or in floors etc

M & L for seamless gypsum board false ceiling 12mm thick including for any sunk or raised moulding with 25mm long self drilling/tapping screws having Philips head with joining compound and 48 mm wide fiber tape to provide seam less finish and including GI framework of seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flange of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm c/c / intermidiate channel 0.9mm thick having two equal flanges of 15mm suspended from soffit at apprx 900mm c/c with GI cleats and steel expansion fasteners with and incl ceiling section (not exc 1.2m length) of 0.55mm thick having kurled web of 50mm an flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting across the intermediate channel at 457mm c/c incl hangers 6mm dia GI adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long & expansion hold fasteners 12.5mm dia 40mm long complete incl thin layer of PoP with Gypsum binder, sanding the surfaces till smooth surface is obtained and finally applying two coats of oil bound distemper over one coat primer with roller finish including dismantling of old existing false ceiling complete all as specified.

S & F stainless steel tubing of any diameter of square or rectangular in shape of grade AISI-316 (type Austenitic anticorrosive in nature) as in railings / grills / designer work including post top cap, bottom plate, cutting, bending, seamless welding and fixing in any type of location incl taking down old railing of any description complete all as specified and as directed.

S & F in repairs of Rotational moulded Polyethylene [HDPE] Water Tanks, Triple Layered, ISI Marked Cylindrical & Vertical Type 1000 Litres Capacity hoisted and fixed in position including provision of 40mm/25mm dia spouts for connecting inlet, outlet, over flow and washout pipes including taking down old tanks complete all as specified and as directed by Engineer- in - charge.

S & F in repairs Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe bore dia of 20mm/25mm (Minimum weight 455 gms) complete all as specified and as directed by Engineer- in - charge.

S & F in repairs for providing 25mm dia Gun Metal, globe or gate valves with iron wheel head, screwed both ends for iron pipes

M & L preparing old wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M & L for preparation of old painted steel surfaces over 10 cm in width or girth not otherwise described and applying 2 coats of synthetic enamel paint over one coat of red oxide primer all as specified & directed.

M & L for hard core of gauge exc 63mm but not exc 100mm , deposited spread and levelled in layers not exc 15 cm thick, watered and rolled/rammed to a true surface with brocken stone or boulder complete all as specified and as directed.

M & L for PCC (1:4:8) type D-2 (40 mm graded stone aggregate) 75mm thick as in sub base complete all as specified and as directed.

S & F for glossy finished chequered cement concrete tiles 30cmx30cmx25mm thick set jointed with grey cement and pigment and pointed in neat cement slurry including 20 mm thick screed bed of CM(1:4) in floors all as specified and as directed by Engineer-in-Charge.

Dismantling plain or corrugated steel sheeting any gauge, thickness including similar pattern roof coverings.

S & F for pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of approved colour having tensile strength of 550Mpa as in roof covering fixed with self tapping screws all as specified and as directed by Engineer-in-Charge.

S&F for pre painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of approved coloure having tensile strength of 550Mpa as in roof covering, ridges, eves gutter etc fixed with self tapping screws all as specified and as directed by Engineer-in-Charge.

Dismantling structural steel work of any descritpion all as specified and as directed by Engineer-in-Charge.

Excavation in post holes(or similar holes) each n. exc 0.5 Cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers n. exc exc 25 cm watering and removing surplus soil to a distance n exc 50 m and making good surface as in soft/loose soil complete all as specified and as directed.

M&L for cement concrete Type C-2, 1:3:6 (using 40 mm graded stone aggregate) as in post foundation and mass concrete all as specified and directed

S & F rolled sections as in post built up of one beam / channel or angle section with flanged plates, caps bases slices angle brackets cleats and other connections, conforming to Fe 410-w.(Gde-E-250 ) quality A complete all as specified and as directed.

M&L for rolled section as in main and cross beam, hip and jack rafter,purlin where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates of grade Fe 290 (grde E-165)

S & F for mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410-W (Gde E-250) Quality -A complete all as specified and as directed.

M&L plain aluminium flat section not less than 0.68 Kg per Rm as in wind tie fixed with aluminium self tapping screws etc.

M&L for preparation of new steel surfaces over 10 cm in width or girth not otherwise described and applying 2 coats of synthetic enamel paint over one coat of red oxide primer all as directed.

Taking down copper/aluminium point wiring(light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc., removing materials and making good disturbed surfaces of walls, floors, etc.

Taking down fuse Unit/DBs 415 Volt/230 Volt

Taking down light fittings of any type complete all as directed .

Taking down old aluminium sub main wiring of any size.

M&L for Point wiring complete as specified with 1100 volt grade 1.5sq.mm. (nominal area) single core PVC insulated unsheathed cable multi-stranded copper conductor drawn through and including rigid non-metallic PVC Conduit of suitable size but not less than 25mm dia ,with all fittings, fixed on wall/ceiling /floor including decorative modular cover plates (inner and outer) suitable for housing modular pattern switches/sockets regulators etc., along with necessary metal boxes flush and covers plates mounting in the wall duly earthed with same cable as for wiring above but green in colour as continuous earthing wire complete all as specified for :-

One light/fan point controlled by one switch 5 Amps one way. Make:- Havells/Finolex/polycab

Two light point controlled by one switch 5 Amps one way.

One 3 pin 5 Amp socket out let on independent board. Make:-Havells/Finolex/polycab

All as per item No.104 above but point wiring with 2 runs of 2.5 sqmm PVC insulated multistranded copper conductor and single run of 2.5 sqmm copper conductor as earth continuity conductor green colour suitable for one 3 pin 15 Amps socket out let on independent board all as directed. Make:-Havells/Finolex/polycab

S & F snap switch 6/10 Amp one way 230 V AC. Make : ROMA(Anchor)/Havells(Crabtree)/Legrand

S & F snap switch 16/20 Amp one way 230 V AC. Make : ROMA(Anchor)/Havells(Crabtree)/Legrand

S & F socket outlet 6/10 Amp intel multi socket for all pins 230 V AC Make : ROMA(Anchor)/Havells(Crabtree)/Legrand

S & F socket outlet 16/20 Amp and 6/10 Amp two socket heavy duty 230 V AC Make : ROMA(Anchor)/Havells(Crabtree)/Legrand

S & F fan regulator electronic socket two module step type 120 W complete all as specified. Make : ROMA(Anchor)/Havells(Crabtree)/Legrand

S & F Ceiling rose PVC polycarbonate , isolated body 3 terminals 230 V complete.

Taking out old burnt winding of ceiling fan motor of 1200/1400mm sweep and M&L for rewinding with new copper winding wire of same gauge with approved quality of super enameled copper winding wire including varnishing heating., including one coat of Spray painting of existing colour and refixing in original position etc complete all as directed.

S & F of ball bearing of ceiling fan No. 6201/6202 all as directed.

S & F of ceiling fan shaft suitable for 1200/1400mm sweep ceiling fan all as directed.

S & F Sub main wiring with PVC insulated multistranded copper cable 2 runs of 6 sq mm 1100 V grade with stranded copper conductor in and incl rigid PVC Casing & Capping fitted on wall (ISI marked) incl all specials like joint elbow. Tee, junction, bend etc and provision of PVC insulated copper conductor single run of multistranded copper cable 6 sq mm for earth continuity all as directed.

S & F Sub main wiring with PVC insulated multistranded copper cable 2 runs of 4 sq mm 1100 V grade with stranded copper conductor in and incl rigid PVC Casing & Capping fitted on wall (ISI marked) incl all specials like joint elbow. Tee, junction, bend etc and provision of PVC insulated copper conductor single run of multistranded copper cable 4 sq mm for earth continuity all as directed.

S & F tripple pole and neutral sheet steel powder coated Distribution board Normal type for MCBs fitted with 200 Amps rated bus bar , Neutral link ,Earth Bar and Din rail suitable for MCCB 3 pole incomer and use on 415 V, 50 Hz supply double door TP & N DB system 04 ways. Make: Legrand/L&T/Havells/ABB

S & F single pole and neutral sheet steel powder coated Distribution board double door 08 ways for MCBs fitted with bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 240 V, 50 Hz complete all as directed.Make: Legrand/L&T/Havells/ABB

S& F MCCB TP, 125 Amps, 50 KA , 415 volts 3 pole. Make: Legrand/L&T/Havells/ABB.

S& F MCB SPN , 40 amps, 16 KA , 240 volts. Make: Legrand /L&T/Havells/ABB

S& F MCB SP , 6-32 amps, 10 KA , 240 volts. Make: Legrand /L&T/Havells/ABB

S& F in repair of 18 W recess mounting LED light fitting in round shape with edge lit luminaire suitable for armstong/grid ceiling complete with separate electronic diver type of fitting 18 W LED 6000K complete all as specified and directed. Make : Philips (Ultraslim+)/Luker/Osram/Havells.

S& F starter switch of capacity 25 amps, working on 240 volts AC supply and suitable for air conditioner all as directed. Make: Crabtree (ACAO252504)/Anchor(Roma)/Legrand

Allied Trading Company

DEEPAK AGENCIES

Sree Tirumala Enterprises

M/S VISHAL CONSTRUCTION

M/s G K Enterprises

Priya construction

RELIANCE SALES AGENCY

AR CONSTRUCTIONS

M/s Sriya Enterprises

MS KAMARIKAR CONSTRUCTION