Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹49.4 LAccepted-AOC 10 11 PANDRI GOVIND NAGAR RAIPUR CHATTISHGARH 492001 | RAIPUR | CHHATTISGARH | 492001 | L1 | Accepted-AOC Accept | |
| 2 | L2₹51.0 L+₹1.6 L (3.30%)Rejected-Finance 290 NEW PLOT JAWAHAR NAGAR JAMMU JAMMU JAMMU KASHMIR 180005 | JAMMU | JAMMU AND KASHMIR | 180005 | L2 | Rejected-Finance Not being L1 | |
| 3 | L3₹51.5 L+₹2.1 L (4.31%)Rejected-Finance SAMBA LINE JUNGLIGHAT POST SRI VIJAYA PURAM 744103 | SRI VIJAYA PURAM | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | L3 | Rejected-Finance Not being L1 | |
| 4 | L4₹52.0 L+₹2.6 L (5.30%)Rejected-Finance | L4 | Rejected-Finance Not being L1 | |
| 5 | L5₹52.3 L+₹2.9 L (5.89%)Rejected-Finance | L5 | Rejected-Finance Not being L1 |
| Sl No | Description | Qty | Unit | bansal construction L4 | KRISHNA TRADING COMPANY L1 | Kathir Marketing Services L7 | M/s Pooja Enterprises L5 | Ravi Enterprises L6 | SKY GROUP L8 | AB ENTERPRISES L3 | Allied Trading Company L2 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Demoliton of cement concrete including tiles and mortar of any description and in any position not otherwise specifically provided for complete all as specified and as directed by Engineer in charge | 5 | Cum | 575 ₹2,875 | 500 ₹2,500 Lowest | 610 ₹3,050 | 582 ₹2,910 | 600 ₹3,000 | 625 ₹3,125 | 540 ₹2,700 | 560 ₹2,800 |
| 2.00 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engineer in charge | 475 | Sqm | 60 ₹28,500 | 45 ₹21,375 Lowest | 70 ₹33,250 | 63 ₹29,925 | 66 ₹31,350 | 74 ₹35,150 | 58 ₹27,550 | 54 ₹25,650 |
| 3.00 | M&L for double charged vitrified tiles (dark shade) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor over and including 15mm thick screed bed in CM (1:4) complete all as specified and as directed by Engineer in charge | 475 | Sqm | 2,280 ₹10,83,000 | 2,200 ₹10,45,000 Lowest | 2,320 ₹11,02,000 | 2,286 ₹10,85,850 | 2,300 ₹10,92,500 | 2,330 ₹11,06,750 | 2,250 ₹10,68,750 | 2,230 ₹10,59,250 |
| 4.00 | M&L for coloured non-skid ceramic tiles 7 to 8 mm thick exc. 0.06 sqm but n.exc 0.11sqm area of each tiles in floor/ steps etc set and jointed in neat cement slurry and pointed in coloured cement to match as in floor over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed by Engineer in charge | 100 | Sqm | 1,475 ₹1,47,500 | 1,400 ₹1,40,000 Lowest | 1,500 ₹1,50,000 | 1,482 ₹1,48,200 | 1,490 ₹1,49,000 | 1,520 ₹1,52,000 | 1,465 ₹1,46,500 | 1,440 ₹1,44,000 |
| 5.00 | M&L for glazed ceramic tiles 450 x 300x 7mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick backing in cement mortar (1:3) complete all as specified and as directed by Engineer in charge | 90 | Sqm | 1,640 ₹1,47,600 | 1,600 ₹1,44,000 Lowest | 1,662 ₹1,49,580 | 1,648 ₹1,48,320 | 1,655 ₹1,48,950 | 1,670 ₹1,50,300 | 1,635 ₹1,47,150 | 1,620 ₹1,45,800 |
| 6.00 | M&L for 20mm Granite (of any type) work (table rubbed and polished) including necessary moulding on edges fixed on cup board shelves partitions holded on angle cleats , holdfasts ,rails etc independently complete all as specified and as directed by Engineer in charge | 25 | Sqm | 6,140 ₹1,53,500 | 6,000 ₹1,50,000 Lowest | 6,170 ₹1,54,250 | 6,160 ₹1,54,000 | 6,152 ₹1,53,800 | 6,161 ₹1,54,025 | 6,125 ₹1,53,125 | 6,110 ₹1,52,750 |
| 7.00 | Demolition of precast concrete block walling built in Cement Mortar including all quoins arches pillars etc complete all as specified and as directed by Engineer in charge | 3 | Cum | 525 ₹1,575 | 500 ₹1,500 | 534 ₹1,602 | 520 ₹1,560 | 540 ₹1,620 | 550 ₹1,650 | 510 ₹1,530 | 480 ₹1,440 Lowest |
| 8.00 | M&L for precast cement concrete block masonry with solid block, exc 10cm in width in PCC type C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:6) complete all as specified and as directed by Engineer in charge | 3 | Cum | 11,200 ₹33,600 | 10,500 ₹31,500 Lowest | 11,450 ₹34,350 | 11,250 ₹33,750 | 11,400 ₹34,200 | 11,500 ₹34,500 | 10,900 ₹32,700 | 11,000 ₹33,000 |
| 9.00 | Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces, ceiling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed by Engineer in charge | 300 | Sqm | 49 ₹14,700 | 40 ₹12,000 Lowest | 56 ₹16,800 | 50 ₹15,000 | 53 ₹15,900 | 58 ₹17,400 | 48 ₹14,400 | 44 ₹13,200 |
| 10.00 | M & L for rendering to concrete or block masonry surfaces or surfaces other than fair faces of brick surfaces, 10mm thick in Cement Mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer in charge | 160 | Sqm | 362 ₹57,920 | 350 ₹56,000 Lowest | 370 ₹59,200 | 365 ₹58,400 | 368 ₹58,880 | 372 ₹59,520 | 360 ₹57,600 | 356 ₹56,960 |
Tender Value
₹49.5 L
EMD Value
₹99,000
Closing Date
18 Feb 2025, 5:45 pmClosed
GE, Minniebay, Sri Vijaya Puram
GE, Minniebay, Junglighat (PO), Sri Vijaya Puram -744103
8516-SPECIAL REPAIRS TO KITCHEN, FLOORING, DOORS, WINDOWS, ROOF CEILING ETC AT CERTAIN MD ACCDN JAYANT PARK BLDG NO-P-109, P-107 UNDER GE MINNIE BAY, SRI VIJAYA PURAM
2025_MES_695114_1
8516/E8
Open Tender
Civil Works
Item Rate
180 days
GE, Minniebay, Sri Vijaya Puram
Please refer Tender documents.
11 documents required · 11 mandatory
₹500
Yes
GE, Minniebay
₹99,000
Yes
23 Aug 2025
28 Jan 2025
19 Feb 2025
28 Jan 2025
18 Feb 2025
11 Feb 2025
Amount
Demoliton of cement concrete including tiles and mortar of any description and in any position not otherwise specifically provided for complete all as specified and as directed by Engineer in charge
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engineer in charge
M&L for double charged vitrified tiles (dark shade) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor over and including 15mm thick screed bed in CM (1:4) complete all as specified and as directed by Engineer in charge
M&L for coloured non-skid ceramic tiles 7 to 8 mm thick exc. 0.06 sqm but n.exc 0.11sqm area of each tiles in floor/ steps etc set and jointed in neat cement slurry and pointed in coloured cement to match as in floor over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed by Engineer in charge
M&L for glazed ceramic tiles 450 x 300x 7mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick backing in cement mortar (1:3) complete all as specified and as directed by Engineer in charge
M&L for 20mm Granite (of any type) work (table rubbed and polished) including necessary moulding on edges fixed on cup board shelves partitions holded on angle cleats , holdfasts ,rails etc independently complete all as specified and as directed by Engineer in charge
Demolition of precast concrete block walling built in Cement Mortar including all quoins arches pillars etc complete all as specified and as directed by Engineer in charge
M&L for precast cement concrete block masonry with solid block, exc 10cm in width in PCC type C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:6) complete all as specified and as directed by Engineer in charge
Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces, ceiling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed by Engineer in charge
M & L for rendering to concrete or block masonry surfaces or surfaces other than fair faces of brick surfaces, 10mm thick in Cement Mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer in charge
M & L for rendering 5mm thick in CM (1:3) on ceiling surfaces finished even & smooth without using extra cement complete all as specified and as directed by Engineer in charge
M & L for rendering 5 mm thick in cement mortar 1:4 over a backing coat of 10mm thick in CM 1:6 (Total 15 mm thick) on concrete or brick masonry surfaces including mixing water proofing compound as per manufacurers instructions and finishing the top surface even and fair without using extra cement complete all as specified and as directed by Engineer in charge Note: Water proofing compound will be measured and paid separately.
M & L for rendering 5mm thick in CM (1:3) on ceiling (external) surfaces finished even & smooth without using extra cement complete all as specified and as directed by Engineer in charge Note: Water proofing compound will be measured and paid separately.
Supply only Integral water proofing compound complete all as specified and as directed by Engineer in charge
M & L for providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and as directed by Engineer in charge
M&L for preparing newly plastered surfaces of wall and applying two coats of plastic emulsion paint over a coat of primer complete all as specified and as directed by Engineer in charge
M&L for preparing newly plastered surfaces of ceiling and applying two coats of plastic emulsion paint over a coat of primer complete all as specified and as directed by Engineer in charge
M & L for complete removel of existing treatment on ceiling and applying two coats of plastic emulsion paint over a coat of primer complete all as specified and as directed by Engineer in charge
M & L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed by Engineer in charge
M & L for preparation of old distempered surfaces of walls and applying one coat of plastic emulsion paint complete all as specified and as directed by Engineer in charge
Taking up or down 20 mm bore tubing and connections and removing off the site complete all as specified and as directed by Engineer in charge
Taking up or down 25 mm bore tubing and connections and removing off the site complete all as specified and as directed by Engineer in charge
Supply and laying of CPVC pipes 20 mm dia outer boreSDR 11 &plain CPVC SDR 11 with all special fittings on walls /ceilings or laying in floors complete all as specified and as directed by Engineer in charge
Supply and laying of CPVC pipes 25mm dia outer boreSDR 11 &plain CPVC SDR 11 with all special fittings on walls /ceilings or laying in floors complete all as specified and as directed by Engineer in charge
Supply and fixing 20 mm outer dia CPVC Male Brass Threaded Adaptor (MTA/MBTA) complete all as specified and as directed by Engineer in charge
Supply and fixing 25 mm outer dia CPVC Male Brass Threaded Adaptor (MTA/MBTA) complete all as specified and as directed by Engineer in charge
Supply and fixing 20mm outer dia CPVC pipes brass Elbow (3/4 X1/2) complete all as specified and as directed by Engineer in charge
Supply and fixing 20mm outer dia CPVC female brass adaptor (FTA/FBTA) complete all as specified and as directed by Engineer in charge
Supply and fixing 25 mm outer dia CPVC female brass adaptor (FTA/FBTA) complete all as specified and as directed by Engineer in charge
Supply and fixing 20 mm outer dia CPVC Brass Tee complete all as specified and as directed by Engineer in charge
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by Engineer in charge
S&F Ball brass valve high pressure of polyethylene float and fly nut complete screwed for iron pipe and fixed, cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule etc and fixed of 25mm bore complete all as specified and as directed by Engineer in charge
Dismantling plain or corrugated steel sheeting,any gauge, thickness,including nanital or similar pattern roof coverings complete all as specified and as directed by Engineer in charge
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer in charge
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in ridges, hips, valley gutter, drip, and straight flashing complete all as specified and as directed by Engineer in charge
M&L Roof trusses (framed), trusssed, purlings, crane gantries, rails and fasternings and heavy breacket frasming(Beam,tee,angle,Channel, hollow sec or flat sections) including distance pieces, cleates etc complete all as specified and as directed by Engineer in charge
S & F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe-410 W (Grade E-250) quality A complete all as specified and as directed by Engineer in charge
M & L for providing cement concrete type B1 (1:2:4) using 20 mm graded aggregate as in copings,apex stones,bed plates etc complete all as specified and as directed by Engineer in charge
M&L for preparing new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer in charge
S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed by Engineer in charge
S&F Aluminium flat as wind tie fixed with 50mm/75mm aluminium self tapping screws complete all as specified and as directed by Engineer in charge
Removing loose and broken concrete/ masonary surface by chiseling/ mechanically etc from the roof slab, coloumn, beam and similar structural members cutting edges, cleaning the dismantled portion with wire brush etc to make the reinforcement naked and remove dust, dirt and other foreign particle etc and removig to debries 50 Mtr from site complete all as specified and as directed by Engineer in charge
M&L for applying IPH RB -107 polymer based rust-remover (pH value –12 ) and applying IPH RB -167 Polymer based rust preventive (pH value-9) to all exposed reinforced bars complete all as specified and as directed by Engineer in charge
M&L for applying one coat of epoxy bonding coat as per manufacture's instruction to bind with old concrete / wall surfaces of soffit of slab, coloumn, beam and similar structural members for new cement surface complete all as specified and as directed by Engineer in charge
M&L for applying polymer modified cement mortar rendering 15mm average thick in CM 1:3 on concrete surface duly mixing polymer modifier of approved makecomplete finished even and smooth without using extra cement as per manufacturer's instructions complete all as specified and as directed by Engineer in charge
BLANK
M&L for preparation of old steel surfaces exc. 10cm width and girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer in charge
Taking down chowkats or frames not exceeding 1.5 Sqm (with shutters & grill (if fixed) without taking off shutters from the frame) complete all as specified and as directed by Engineer in charge
Taking down chowkats or frames exc 1.5 Sqm and not exceeding 4 Sqm (with shutters and grill (if fixed) without taking off shutters from the frame) complete all as specified and as directed by Engineer in charge
S & F Solid PVC Door frame of size 50mm x 47mm made out of 5mm rudraksh colour PVC sheet reinforced with MS square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed by Engineer in charge
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of rudraksh colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed by Engineer in charge
M&L for powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium frame for doors, windows, ventilators and partition with one or more rebates including joining cleat for fixing etc complete all as specified and as directed by Engineer in charge
S&F Anodised aluminium powder coating of any colour (Thickness or powder coating not less than 50 micron) door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and as directed by Engineer in charge
M&L for minor repair to aluminum joinery and making serviceable the same by meance of adjustment, greacing as necessary etc complete all as specified and as directed by Engineer in charge
S & F Anodised aluminium powder coating of any colour (Thickness or powder coating not less than 50 micron).window and ventilator shutters (sliding type), side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed by Engineer in charge
M&L for taking out window,ventilator shutter and changing imax and glazing and beading and re fixing complete all as specified and as directed by Engineer in charge
Taking down Shutters of any description exc 2 sqm each and refixing in the same opening complete all as specified and as directed by Engineer in charge
Taking down Shutters of any description exc 1 but nexc 2 sqm each and refixing the same complete all as specified and as directed by Engineer in charge
Refixing shutter of any description not exceeding 1 Sqm in the same location complete all as specified and as directed by Engineer in charge
Refixing shutter of any description exceeding 1 Sqm and not exceeding 2 sq m in the same location complete all as specified and as directed by Engineer in charge
S&F 12mm thick Prelaminated particle board, interior grade, prelaminated on both sides with decorative choice lamination fixed as in panels of Aluminium door shutters, partition etc complete all as specified and as directed by Engineer in charge
S & F only 4 mm Plain sheet glass ordinary quality ,in square exc 0.5 sqm each complete all as specified and as directed by Engineer in charge
S & F only Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed by Engineer in charge
S & F only Figured glass 4 mm,pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and as directed by Engineer in charge
S & F second class hard wood, plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and as directed by Engineer in charge
S & F second class hard wood factory made 40 mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed by Engineer in charge
S & F second class hard wood 35 mm thick glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc divided in to squares with plain, chamfered or rounded, mitred and rebated sash bars fitted with cut and mitred beads for securing glass etc complete all as specified and as directed by Engineer in charge
M&L for preparation of new wood/wood based surfaces of exc. 10cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engineer in charge
M&L for second class hard-wood clean sawn in scantlings framed and fixed complete all as specified and as directed by Engineer in charge
S&F Aluminium anodised sliding door bolts 250 mm long with hasp and staple complete all as specified and as directed by Engineer in charge
S&F Aluminium anodised sliding door bolts 300mm long with hasp and staple complete all as specified and as directed by Engineer in charge
S&F aluminium anodised barrel tower bolt of extruded section 150mm long complete all as specified and as directed by Engineer in charge
S&F extruded aluminium alloy handle fabricated type anodised 100mm long complete all as specified and as directed by Engineer in charge
S&F extruded aluminium alloy handle fabricated type anodised 150mm long complete all as specified and as directed by Engineer in charge
S & F butt hinges of stainless steel 150 mm long ISI marked fixed with brass screws complete all as specified and as directed by Engineer in charge
S & F butt hinges of stainless steel 100 mm long ISI marked fixed with brass screws complete all as specified and as directed by Engineer in charge
S & F 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor complete all as specified and as directed by Engineer in charge
S&F in repairs 18 mm thick HDF board BWP, type BB fixed in cup board shutters, shelves & partition complete all as specified and as directed by Engineer in charge
S&F 100mm long hasp and staples mild steel wire type stove enamelled black including bolt to hinge plate and fixed with screws complete all as specified and as directed by Engineer in charge
S&F stainless steel auto closing heavy duty modular hinges of size 103 x 64mm for cupboard shutters complete all as specified and as directed by Engineer in charge
S & F in repair fancy type curtain Rod, stainless steel,chromium plated 25 mm dia with stops, rollers etc complete all as specified and as directed by Engineer in charge
S & F in repair brass brackets chromium plated suitable for curtain Rod 25 mm dia complete all as specified and as directed by Engineer in charge
S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915x460 mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed by Engineer in charge
S&F in repair stainless steel sink with drainage board made out of 1.00 mm thick sheet with plug, washers, Ms angle cantilever brackets for suitable size and connecting union to pipe of overall size 1140 mm x 500 mm and bowl size 510mm x 400 mm x 190 mm complete all as specified and as directed by Engineer in charge
S&F Wash basins including brackets, Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and as directed by Engineer in charge
S & F 32 mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc.with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed by Engineer in charge
S & F 40 mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc.with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed by Engineer in charge
S & F 32 mm (Dia of discharge pipe) Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms) complete all as specified and as directed by Engineer in charge
S & F 40 mm (Dia of discharge pipe) Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and as directed by Engineer in charge
S&F in repairs vitreous China squatting pan, `Orissa' pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and as directed by Engineer in charge
S&F in repairs Towel Rail CP Brass complete all as specified and as directed by Engineer in charge
S&F in repairs Towel Rack 600mm Long with Lower Hangers Superior finished CP Brass complete all as specified and as directed by Engineer in charge
S&F in repairs angular stop cock cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for pipe or union fixed for 15mm bore complete all as specified and as directed by Engineer in charge
S&F in repairs concealed stop cock with fitting sleeves,operating lever &adjustable wall flange with seal(comatible with ALD-089)valves cast copper alloy chromium plated with long shank and cup (concealed type) fancy type screwed down high pressure screwed both ends for pipe complete all as specified and as directed by Engineer in charge
S&F in repair CP Toilet paper holder fancy type high quality (Make : ACN-1151N of Jaquar/T0254C of Johnson/272130160071 of Somany) complete all as specified and as directed by Engineer in charge
S&F in repairs brass chromium plated shower rose with or without swivel joint 100mm size complete all as specified and as directed by Engineer in charge
S & F in repair Bib Taps with flange, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type with crutch or butterfly handle, screwed down for iron pipe and fixed etc complete all as specified and as directed by Engineer in charge
S & F Two way Bib Taps, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type with crutch or butterfly handle, screwed down for iron pipe and fixed etc complete all as specified and as directed by Engineer in charge
S&F in repairs brass chromium plated Hand shower (Health Faucet)(ABS Body) with 1 Meter long Easy Flex Tube in Chrome Finish& wall Hook complete all as specified and as directed by Engineer in charge
S & F Soap Dish,brass chromium plated of approximate size 160 x 160 x 90 mm with screws complete all as specified and as directed by Engineer in charge
S & F PVC Body Cabinet Box Mirror of size 350mm X 450mm X 100mm in PTMT alloy of approved design and pattern complete all as specified and as directed by Engineer in charge
S & F in repairs Pillar Taps, cast copper alloy, Chromium Plated, Fancy Type, 15 mm dia, with capstan head, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed by Engineer in charge
S&F in repairs Vitreous China wash down watercloset pan (pedestal pattern), white including Plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed by Engineer in charge
S & F in repairs 10 Liters capacity, PVC Valve less, Syphonic action type, low level flushing cistern, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC, 32mm dia including brackets and connections to pipe complete all as specified and as directed by Engineer in charge
S&F in repairs PVC flexible connection with PTMT nuts, of 15mm dia and 600mm long with brass unions and rubber washers on either side, for connecting water supply line to WHB, flushtank ,Geyser etc, complete all as specified and as directed by Engineer in charge
M&L for 75 mm thick PCC 1:3:6 type C-1 (40 mm graded aggregate) as in floor all as specified and directed, finishing cement concrete surface evan and smooth with using extra cement complete all as specified and as directed by Engineer in charge
M & L for 25 mm thick, PCC 1:2:4, Type B-0, using 12.5mm graded aggregate as in Sub base for flooring/levelling coarse, sunken floor etc complete all as specified and as directed by Engineer in charge
M&L for 100 mm thick PCC 1:2:4 type B-2(40 mm graded aggregate) as in PCC path,hard standing and similar work all as specified and directed,finishing cement concrete surface evan and smooth without using extra cement and Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and as directed by Engineer in charge
S&F aluminium door seals of 32 mm (overall size) with standadrd 1 mm thick aluminium sections and bottom brush and provision of counter sunk holes for screws etc complete all as specified and as directed by Engineer in charge
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engineer in charge
Material & Labour for providing and fixing stainless steel (Grade SS-316) ISI marked railing dul polished with buffing machine made of hollow tubes, channels, plates etc., including welding, grinding , buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts complete all as specified and directed by Engineer-in-Charge.
Allied Trading Company (BID ID -3241482)
AB ENTERPRISES (BID ID -3242355)
bansal construction (BID ID -3241460)
M/s Pooja Enterprises (BID ID -3242400)
Ravi Enterprises (BID ID -3242555)
Kathir Marketing Services (BID ID -3242317)
SKY GROUP (BID ID -3242805)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .