Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.5 LAccepted-AOC 210 C RAM DASS KA HATA SADAR CANTT LUCKNOW UP PIN 226002 | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226002 | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹8.9 L+₹1.4 L (18.4%)Rejected-Finance | L2 | Rejected-Finance NOT BEING LOWEST |
Tender Value
₹8.9 L
EMD Value
₹17,800
Closing Date
7 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) BKT
GE (AF) BKT, LUCKNOW
EXTENSION OF MT GARAGE FOR STORAGE OF GROUND EQUIPMENTS AT 2232 SQN AT AF STN BKT
2023_MES_578810_1
8640/BKT/E8
Open Tender
Civil Works
Item Rate
120 days
GE (AF) BKT
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GE (AF) BKT
₹17,800
Yes
20 Mar 2023
3 Feb 2023
9 Mar 2023
3 Feb 2023
7 Mar 2023
16 Feb 2023
Amount
Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth for foundation, for laying of cable/foundation of pole & stay etc and getting out in any type of soil complete all as specified and as directed.
M&L for PCC 1:4:8 type-D2 (40mm graded stone aggregate) as in foundations, filling and mass concrete.sub base as in floors complete all as specified and as directed.
M&L for brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and as directed.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa providing as in roof covering/cladding to wall, fixed with self tapping screws/ welding, nuts and washer complete all as specified and directed.
S&F Rolled mild steel in Roof truss (framed),trussed,purlins,crane grantries,rails and fastening and heavy bracket framing (Beam,tee,angle,channel or flat section) includuing distance pieces,cleats etc (Fe-410W-Grade (E-250) quality-A) complete all as specified and directed.
M&L for preparation of new steel surfaces of any description not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of zink chrome primer including necessary rubbing with sand paper or grinded by hand grinder to achieve smooth and even surface complete all as specified and directed.
M&L for rendering 15 mm thick on fair faces of brick or concrete surface in cement mortar 1:4 finished even and smooth without using extra cement with necessary scaffolding complete all as specified and directed.
M&L for rendering 15 mm thick on fair faces of brick or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed.
M&L for preparation of new plastered/ concrete surfaces of walls to achieve smooth and even surface and applying two coats of Weather proof paint in camouflaging pattern (combination of three colour) over one coat of alkali resistant primer complete all as specified and as directed.
M&L prepration of new plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed.
Surface excavation n. exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.
Returning Filling in,including spreading, levelling, watering and well ramming in layers, not exc 25 cm with excavated soil complete all as specified and as directed.
Removing excavated material n exc 50 m and depositing where directed at level n exc 1.5m above the starting point complete all as specified and as directed.
M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in floor/ plinth protection laid in alternate bays finished even and smooth without using extra cement including joints filling by using mastic filling comprising one part of hot bitumen 85/25 mixed with three parts of coarse sand by weight complete all as specified and directed.
M&L for hard core of broken stone or boulder of gauge not exceeding 63mm, deposited, spread and leveled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and as directed.
M&L for Plain cement concrete (1:4:8), type D-2 (using 40 mm graded stone aggregate) 75 mm thick, as in sub base of floors, finished even and fair complete all as specified and as directed
M&L for 100 mm thick PCC 1:2:4, type B-1, (using 20 mm graded stone aggregate) as in floors, finished even and smooth complete all as specified and directed.
M&L for forming 20mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound,Grade "B"and cover with 100 mm thick cement concrete complete all as specified and directed.
Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
M&L for plain, cement concrete type B1 1:2:4 (12.5mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating,complete all as specified and directed.(the rates include for use of formwork))
M&L for form work to rough finished square, rectangular or polygonal surfaces of concrete side of pillar posts struts, pier, column and stanchions incl finished surface complete all as specified and directed.
M&L for TMT mild steel bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for column, hooking end and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.
M&L RCC type B1, 1:2:4 (20mm graded stone aggregate) as in beams , cantilevers, bressmummers, lintels over 1.5 m span complete all as specified and as directed.
M&L Form work for rough finished flat surfaces of concrete to sides and soffits of floor or roof beams , beam haunchings, girders, bressummers, lintels, cantilevers,shelves including supports, overhangs, etc also splays between floors and beams, etc for complete all as specified and as directed.
Supply and laying well burnt sub class 'B' bricks, locally best available laid in trenches for protection for underground cable complete all as specified and directed.
M&L for dry sand cushioning for protection of LT underground cable including watering & consolidation complete all as specified and directed. Note : Punned thickness will be measured and paid
M&L for GI tubing light grade with all fittings and fixed complete to wall, poles and ceiling or laid in floors/roads of size 40 mm dia complete all as specified and directed. Make- TATA/JINDAL / ZENITH
Tools and Labour for making horizontal hole under road suitable for 80 mm bore size at the depth not less than 1 mtr below ground level for passing of LT underground cable wothout damaging of existing road surface complete all as specified and directed.
Supply, laying, testing and passing through pipe, connecting and testing UG cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavt duty) with stranded aluminium conductor, 1100 volts grade (Note-Excavation, Earth work, pipe etc will be measured and paid separately) XLPE cable of size 10 sq mm 2 core complete all as specified and directed. Make- of cable- Finolex/Havells/RPG(Asian)/RR Kable
S&F sheet metal enclosure double door type 4 way for distribution board when MCB to be used SPN 4 way 240 volt sheet complete all as specified and directed.
S&F MCB SPN 32 to 40 Amps 240 volt, 50 hz, 10 kA breaking capacity :B" curved type complete all as specified and directed.
S&F MCB single pole, 6 to 32 Amps, 240 Volts 50 HZ, 10 KA breaking capacitycomplete all as specified and directed. Make:- Havells/Legrand/GE/Seimens
M&L for point wiring with two single core PVC insulated & PVC unsheathed stranded FRLS copper conductor cable of size 1.5 Sqmm 1100 volts grade confirming to IS 694, drawn through in and including concealed PVC conduit of size 20 mm to 25mm with all accessories including making good the disturbed surfaces of wall with colour washing/ distempering the surface to match the existing and one single core PVC insulated & PVC sheathed multi stranded copper conductor of size 1.5 Sqmm 1100 Volts grade as earth continuity conductor connected to common earth dolly including suitable size of 1 to 8 module metal flux boxes and including modular front cover ,colour plate & back plate for mounting modular type switch socket /fan regulator etc, complete as specified for One light/Fan point controlled by one 5 Amps 240 V switch one way complete.
All as per item No 34 above but One 3 pin 5 amps switch socket outlet point on independent board
All as per item No 34 above but One 3 pin 5 amps socket point on same board
All as per the item no 34 but with 2.5 sqmm conductor for 5 pin 15 Amps switch socket outlet.
S&F switch Modular single pole, one 5 Amps 1 module
S&F switch socket outlet 2 in 1, 5 pin,5 Amps modular type, 3 module
S&F Switch socket outlet 2 in 1, 5 pin, 15 Amps modular type, 3 module
S&F socket outlet 5 Amps, 2 module
M&L ceiling rose, PVC/poycarbonate, isolated body Make: Plaza/Fine/Anchor
S&F for LED light fittings 1x18/20 watt, 220 volt AC decorative end cap type with driver holder including 20 watt LED tube light connecting up with 3 core flexible cable copper conductor of suitable size from ceiling rose complete all as specified and directed.
S&F for LED security light 45 watt or next capacity complete with security light bracket (complete with two set of clamp, made of 50 x 6 mm flat iron with nut and bolt) made out of 40 mm medium grade GI pipe bend to shape and with fixing arrangements duly welded (length of pipe should not be less than 1.2 mtr) and making connection with using 1.5 Sqmm PVC insulated multistranded copper conductor two single core cable complete all as specified and directed.
M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate no 3 of MES schedule Part-I connected to earthing point and testing on completion with and including 15 mm bore light grade GI protection pipe (upto 7.5m beyond outer edge of earth pit) PCC pit in mix 1:3:6 type C1 with RCC 1:2:4 type B-1 40 mm thick cover reinforced with 6 mm dia M.S bars 3 Nos both ways with lifting hook made out of 6 mm dia bar, watering arrangement with funnel and wire mesh and 20 mm bore light grade GI watering pipe, common salt and charcoal filling, necessary excavation and earth work complete all as specified and directed.
ASHWANI BUILDERS & SUPPLIERS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .