GE/SRA/T-15/2025-26

Amount

Taking down Cement Plaster including raking out Joints, hacking for Key, scrubbing down with Water and removing Debris, etc. to Outside MD/AF Land, complete all as specified and directed.

M&L for complete removal of existing treatment on old painted surfaces of walls by scrapping and removing layers of all wall finishes including cleaning, watering to make the surface clean and free from dust, etc including necessary scaffolding, safety and protective measures complete all as specified and directed.

M&L for Rendering (Internal) 12mm thick in cement mortar 1:6 on Brick Walls or on Concrete Surfaces, Plastered Surfaces finished Even and Smooth without using Extra Cement complete all as specified and directed.

M&L for Rendering (Internal) 15mm thick in cement mortar 1:6 on Brick Walls or on Concrete Surfaces, Plastered Surfaces finished Even and Smooth without using Extra Cement complete all as specified and directed.

M&L preparing undecorated Plastered surfaces of internal walls and treating with two coats of single component penetrative cum film forming interior water proofing coating (as per manufacturer's instructions) complete all as specified and directed. (MAKE: ASIAN PAINTS, SMARTCARE HYDROLOC / DR FIXIT, SURESEAL / BERGER, DAMPSTOP ADVANCED or similar products as approved by GE) NOTE: This item shall be executed only for surfaces severly affected by moisture before applying top coat finishes.

M&L for preparation of surfaces and applying one coat of cement primer suitable for internal walls complete all as specified and directed.

M&L for applying 1.5mm thick Wall Putty (overall thickness in two coats) over internal plastered surfaces of wall/cement board including Rubbing down with Sand Paper of proper grade to obtain a Smooth Finished Surface complete all as specified and directed.

M&L for applying Two Coats of Acrylic Distemper (as approved), mixed with stainer for achieving the desired shade and applied with rollers on walls/cement boards complete all as specified and directed.

M&L for Rendering 5.0mm thick in cement mortar 1:3 on Concrete Surfaces of Ceilings, Plastered Surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing newly Plastered surfaces of Ceiling and applying Three Coats of White Wash, complete all as specified and directed.

M&L for 15 mm thick plastering in two layers, 10 mm + 5 mm in cement mortar 1:4, top layer of 5 mm thickness mixed with with water proofing compound (as per manufacturer's instructions) on external surfaces of brick/stone walls or concrete surfaces finished even and fair upto 4 storey height including necessary scaffloding complete all as specified and directed. Note : Water Proofing compound shall be measured and paid seperately as "Supply only".

Supply only Liquid Water Proofing Compound, ISI Marked, as approved, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of external walls and applying a coat of suitable exterior primer, on new wall surfaces of any description, over 10cm width or girth not otherwise described, upto 4 storey height including necessary scaffloding complete all as specified and directed.

M&L for applying two coats of exterior acrylic emulsion paint (having anti-dust & anti-algae properties), applied with rollers to new wall surfaces of any description, over 10cm width or girth not otherwise described, as per manufacturer's instructions, upto 4 storey height including necessary scaffloding complete all as specified and directed.

M&L for Rough Cast Plaster on Brick Walls consisting Under Coat of Cement and Sand Mortar 1:3 not less than 10mm thick and while it is still in Plastic state the Rough Cast Mixture consisting of Crushed Stone or Fine Gravel mixed with Coarse Sand and Cement in the Ratio 1:1:1 shall be applied and finish Even, complete all as specified and directed.

M&L preparing newly Rough Cast plastered surfaces of exterior Walls and applying a coat of suitable exterior Primer (as per Manufacturer's instructions), complete all as specified and directed.

M&L for applying two coats of Exterior Emulsion Paint (having anti-dust & anti-algae properties) with approved Tint (as per Manufacturer's instructions), on rough cast plastered surfaces complete all as specified and directed.

M&L preparing old Distempered surfaces of Walls/cement boards including filling the existing Nails/Screw Holes, etc. and applying One Coat of Acrylic Distemper (of approved tint) with rollers complete all as specified and directed.

M&L for preparing old treated/decorated surfaces of ceilings and applying One Coat of White Wash, complete all as specified and directed.

M&L for preparing old treated/decorated surfaces of walls and applying One Coat of White Wash, complete all as specified and directed.

M&L preparing old Treated/Painted Steel and Iron Surfaces of any description, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and directed.

M&L preparing old decorated/painted Wood and Wood Based Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (1st quality), complete all as specified and directed.

M&L Writing Letters or Figures (Block Roman, Italic or Indian) on Buildings, not exc 15 cm High, complete all as specified and as directed.

M&L preparing old Decorated/Treated Plastered surfaces of Exterior Walls upto Four Storey by brooming down or steel wire brushing and scraping down, filling of cracks with suitable paste and applying with rollers One Coat of Exterior Emulsion Paint (having anti-dust & anti-algae properties) with approved Tint, applied with rollers to wall surfaces of any description, over 10cm width or girth not otherwise described, as per manufacturer's instructions, upto 4 storey height including necessary scaffloding complete all as specified and directed.

-ditto- but with One Coat of Exterior Emulsion Paint (having anti-dust & anti-algae properties) on old Decorated/Treated Rough Cast Plastered surfaces.

M&L preparing old Decorated/Treated Plastered surfaces of Exterior Walls upto Four Storey by brooming down or steel wire brushing and scraping down, filling of cracks with suitable paste and applying with rollers Two Coats of Exterior Emulsion Paint (having anti-dust & anti-algae properties) with approved Tint, applied with rollers to wall surfaces of any description, over 10cm width or girth not otherwise described, as per manufacturer's instructions, upto 4 storey height including necessary scaffloding complete all as specified and directed.

M/S GOYAL CONSTRUCTIONS (BID ID -3310246)

M/S Aggarwal construction co. (BID ID -3309936)

M/s MANN CONSTRUCTIONS (BID ID -3310018)

M/s Har Nandi Construction Company (BID ID -3310166)

M/s Satguru Traders (BID ID -3309982)

shiv shanker enterprises (BID ID -3315432)

M/S D C M Enterprises (BID ID -3308424)