Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | l-1₹17.9 LAccepted-AOC 12 DORU DOORU VERINAG ROAD NEAR TOWN HALL ANANTHNAG JAMMU KASHMIR 192211 | ANANTNAG | JAMMU AND KASHMIR | 192211 | l-1 | Accepted-AOC Tender accepted due to lowest and quoted reasonable rates | |
| 2 | l-2₹21.5 L+₹3.6 L (20.0%)Rejected-Finance 361 BEHIND DAV SCHOOL JAWAHAR NAGAR SRINAGAR 190008 | SRINAGAR | JAMMU AND KASHMIR | 190008 | l-2 | Rejected-Finance Higher side quoted amount |
Tender Value
Refer Docs
EMD Value
₹40,940
Closing Date
2 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE KHUMBATHANG
CWE KHUMBATHANG
SPL REPAIR TO VERANDAH PORTION IN DIV HQ OFFRS RESIDENCE BLDG NO T 11 T 12 T 14 AND T 15 IN DIV HQ UNDER GE KHUMBATHANG
2022_MES_561737_1
80051/113/E8
Open Tender
Civil Works
Works
180 days
GE Khumbathang
As per tender docu
7 documents required · 7 mandatory
₹500
GE Khumbathang
₹40,940
12 Dec 2022
5 Nov 2022
3 Dec 2022
5 Nov 2022
2 Dec 2022
19 Nov 2022
Amount
Dismantling plain or corrugated stee/Fiber sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified
Dismantling wrought iron or mild steel work of any description not otherwise provide complete all as specified
Demolition of concrete in ground floor and paving n exc 15 cm thickness (below or above ground level)
M & L for pre-cast cement concrete block type C-1,1:3:6 (20mm graded agg) in masonry with solid blocks exc 10 cm in width and setting in cement mortar 1:6 in walls complete all as specified
Taking down plastering on lathing (other than wire-netting), without removing lathing, in cement lime or cement mortar complete all as specified
M&L for rendering 10 mm thick on brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement. Complete all as specified
M&L for rendering 15 mm thick on brick work or concrete surfaces in CM 1:4 finished even and fair without using extra cement. Complete all as specified
M & L for Prepairing new or previous untreated surfaces on Brick/Concrete Surfaces of any description over 10 cm girth or width, not otherwise described with two coat of Plastic Emulsion paint over a coat of primer complete all as specified
M & L for Prepairing on plastered or unplastered surfaces of wall of any description over 10 cm girth or width, not otherwise described with two coat of Cement Base paint complete all as specified
Hacking out old broken glass (any thickness, size,quality or description) from wooden frames glazed with putty or fixed with beads.
S & F sheet glass,5.50 mm thick, ordinary quality fixed with beads or oil putty in squares exc 0.5 Sqm in each pane, etc all as specified
S & F 2nd class hard wood, plain, solid, straight chowkats and frame, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned and joints, etc. complete all as specified
M&L preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified
M&L for mild steel work as in bands, straps, supports and stays for rain water, ventilating pipes including bolts (if required), clamps; hold fasts; wall ties; plain angle cleats for small article confirming to FE 290 Gd E-165 securing purlins to wood trusses or rafters and similar work complete all as specified
M& L for demolition of Roofs, floors, beams, staircases, landing, chajjas and similar suspended work complete all as specified
S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9 mm dia or securing with clips complete all as specified.
S&F mild steel TMT bars 5 mm dia and over upto and including 10mm dia in stirrups, spacers and binders10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9 mm dia or securing with clips complete all as specified.
M& L form work to sides and soffits of lintels including sup-ports, overhangs, etc. also splays between floors and beams etc. complete all as specified.
M&L RCC 1:2:4 type B1 using 20mm stone aggregates Nominal mix concrete using 20mm graded stone aggregate as in lintels and mass concrete and similar items , complete all as specified and directed.
M&L cement concrete type C1, 1:3:6 (20mm graded aggregate) as in cills, copings, bed plates, blocks for hold fasts, etc & similar work including weathering, slightly rounded or chamfered angles and throating, etc. complete all as specified
M&L 75 mm thick PCC 1:3:6 type C-1 using 20mm graded stone agg in plinth protection, finished even and smooth w/o using extra cement complete all as specified and directed.
S & F 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc with grade of zinc coating 275 all as specified complete
M & L for Prepairing on steel Surfaces of any description over 10 cm girth or width, not otherwise described with two coat of synthetic enemel paint over a coat of red oxide primer complete all as specified
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick cement mortor in CM 1:4 complete all as specified and directed.
M&L for 3mm thick wall care putty on wall complete all as specified and directed.
Excavation in trenches in any type of soil not exceeding 1.50m deep and n-exc1.5mtr wide getting out complete all as specified.
Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick each,of any type soil, complete all as specified and directed.
Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
Demolition and breaking up of 150mm internal dia of drain pipes(Salt glazed, PVC,Ac or reinforced concrete) set in cement mortor complete all as specified and directed.
M&L for concrete bed to drain pipe 150mm including packing under and haunching against the sides of pipes after they are laid and tested in cement complete all as specified and directed.
M&L laying, bedding and testing of 150mm SGSW/PVC drain pipe complete all as specified and directed.
Dismantling wall and ceilling boards of any description including cover fillets complete.
Dismantling timber fillets, rails, posts rafter purlins under 40 Sqcm in sectional area complete all as specified and directed.
M&L 9mm thick, prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work as in ceiling complete all as specified.
M&L second class soft wood, plain fillets, square or rectangular in section of area exc 13 and n exc 25 Sqcm, clean sawn, secured with nails or brads complete all as specified.
M&L second class soft wood, plain fillets, square or rectangular in section of area exc 6 and n exc 13 Sqcm, clean sawn, secured with nails or brads complete all as specified.
M&L second class soft wood, plain fillets, square or rectangular in section of area exc 3 sqcm but n exc 6 Sqcm, clean sawn, secured with nails or brads complete all as specified.
M&L second class soft wood, plain fillets, square or rectangular in section of area n.exc 3 Sqcm, clean sawn, secured with nails or brads complete all as specified.
S&F in repairs looking mirror of size 600x450mm, 5mm thick bevelled edge mounted on 6mm thick plywood including fixing with screws and cup washers.
S&F in repair vitreous china pedestal pattern water closet with seat cover any colour complete all as specified and directed by Engr-in-Charge.
S & F in repair high or low level colour/white PVC valveless syphonic action type flushing cistern 10 ltrs capacity with inlet ball valve, float and handle including brackets, 450mm long PVC short connection complete all as specified and directed by Engr-in-charge.
S&F floor door stopper of aluminium alloy body and tongue 150 mm overall length, anodized with hard drawn steel spring, fixed in floor all as specified.
S&F in repair aluminium extruded section Door closer hydraulically regulated, designation no 2 universal type, suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 kg and fixed in repairs.
S&F in repairs Stainless steel chromium plated brass towel rail 20mm dia D type 60cm long between flanges .
S&F towel ring of PTMT fixed with and including chromium plated brass screws and wooden/ plastic cleats(Mini weight 90 gms), complete all as specified.
S&F aluminium anodised sliding door bolt 250 mm long plate type stove enamelled black with bright bolt not less than 12 mm dia with and incl a minimum of 6 bolt and nut four on bolt plate and two on staple plate and fixed complete all as specified.
S&F in repair 125mm long , extruded aluminium alloy handles fabricated type anodised and fixed complete all as specified.
S&F in repair 125mm aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified.
S&F 100 mm butt hinges medium weight cold rolled mild steel fixed with screws or welded all as directed.
S & F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP brackets guard and railing 60cm long complete
S & F in repairs for Bib taps, CP for iron pipe and fixed 15 mm bore complete all as specified and directed by Engr-in-Charge.
S&F in repairs 15 mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe and fixed.
S & F in repairs Pillar taps fancy type 15 mm bore cast copper alloy, with capstain heads, chromium platedscrewed down high pressure, with or without lettered "Hot" of "Cold" with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge.
S&F PVC connection 15mm size with PTMT Nut of length 450mm complete.
S & F Vitreous China wash basin, angle back, size 600x480mm white, excluding taps, waste chain and plug and porcelain stopper but including brackets complete all as specified
Taking up or down steel tubing and connections, including cleaning for refixing or removal to store bore of pipe 15mm.
S&F Steel water tubing 15 mm bore medium grade galvanised with all fittings including short lengths, fixed to walls, or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) all as specified.
Taking up or down steel tubing and connections, including cleaning for refixing or removal to store bore of pipe 20mm.
S&F Steel water tubing 20 mm bore medium grade galvanised with all fittings including short lengths, fixed to walls, or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) all as specified.
S&F 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified.
S&F 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified.
S&F 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified.
KASHMIR FAIR DEAL SERVICES
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .