ADDN / ALTN CUM SPL REPAIR TO BLDG. NO. P-01, P-08, P-450, P-451 AND P-455 AT HALDI GHATI LINE IN ZONE-III AREA UNDER AGE BR-III OF GE(S) JAIPUR

Amount

Surface excavation not exc. 1.5m deep and getting out in soft/loose soil complete all as specified and directed.

Rough excavation not exceeding 1.5 m deep and getting out soft/loose soil complete all as specified and directed.

Excavating over areas, loose/ soft soil n exc 1.5 m deep and getting out complete all as specified and directed.

Excavating in trenches n exc 1.5m in width & n exc 1.5m in depth for foundation etc. and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n exc 25cm in soft/losesoil complete all as specified and directed.

Excavating in post holes (or similar holes) each n.exc 0.50 cum,getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm, watering, and removing surplus soil to a distance n.exc 50 m and making good surface in soft/ loose soil complete all as specified and directed.

Removing excavated soil not exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed.

M&L for broken stone hardcore of gauge not exc. 63mm, deposited, spread and levelled in layers not exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2, using 40mm graded stone aggregate in foundation, filling and mass concrete complete all as specified and directed.

M&L for PCC 1:3:6 type C2 using 40 mm graded stone aggregate in foundations, post holes, filling and mass concrete complete all as specified and directed.

M&L for cement concrete type B1 (using 20mm graded stone aggregate) 1:2:4 in roof kerbs, roof padding, chajja, rounded or chamfered on edges including necessary formwork complete all as specified and directed.

M&L for reinforced cement concrete M-25 (design mix) (20mm graded stone aggregates) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc complete all as specified and directed.

M&L for RCC M25 (design mix) (20 mm graded stone aggregate ) as in chhaja ,roof projection etc complete all as specified and directed.

M&L for reinforced cement concrete M-25 (design mix) using 20mm graded stone aggregate in columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for cutting holes in stone / brick walls built in CM for inserting hold fast & making good dismantled portion in CM (1:3) or cement concrete 1:2:4 depth of embaded portion of holdfast n. exc half brick complete all as specified and directed.

M&L for granite 18 to 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window & Door cills, kitchen shelf and like including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed or bedding layer in cement mortor 1:4 complete all as specified and directed.

M&L formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or as directed complete all as specified and directed.

M&L form work to chullah hoods, chajjas, troughs and similar items including edges finish with finish flat surface complete all as specified and directed.

M&L for formwork to sides of pillars, and stanchions for rough finished flat surfaces of concrete complete all as specified and directed.

S&F 2nd class hard wood 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass , gauze, etc, (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) fitted to chowkats complete all as specified and directed.

M&L for 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Taking down chowkats or frames (without taking of shutters) not exceeding 1.5 Sqm each complete all as specified and directed.

Taking down Chowkats or frames exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down shutters of any description exc 1.00 sqm but n exc 2.00 sqm each complete all as specified and directed.

M&L for 18 mm thick wood plastic composite (WPC) panel fixed in repair with suitable pins, screws and adhessive in cabinets body, shutters and shelves complete all as specified and directed.

S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt 200 mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F Aluminium handles 125 mm size, cast type, anodised complete all as specified and directed.

S&F harrison rail/curtain rod, 20mm dia, mild steel chromium plated with fixing bracket, stops and complete fitment complete all as specifed and as directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified and directed.

M&L for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed to wooden or aluminium shutters complete all as specified and directed.

S&F for caps/ side Bulbs PVC suitable for curtain rod fixed in repair complete all as specified and directed by Eng-in-Charge

S&F soft close clip on hinge bright finish (Auto close hinges) complete all as specified and directed.

S&F of fancy type MS bracket suitable for curtain rod fixed in repair complete all as specified and directed.

S&F stainless steel cabinet handles 75mm size decorative type complete all as specified and directed.

S&F of 20 mm dia drapery fancy type curtain rod fixed in repair complete all as specified and directed by Eng-in-Charge

S&F 125 mm dia oval shape brass handle fancy type bright finish complete all as specified and directed.

S&F MS TMT bars 10 mm dia and above cut to length bent to shape reqd incl cranking, bending spirally for hooping for cols, hooking ends and binding with steel MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

S&F MS TMT bars 6 mm to 8 mm dia cut to length bent to shape reqd incl cranking, bending spirally for hooping for cols, hooking ends, stirupps and binding with steel MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

S&F Plate girder or single stanchions, built up of one beam or channel section with flange plates, caps,bases. splices, angle brackets of Fe-410W(Gde E-250) quality A complete all as specified and as directed.

S&F plain or chequered plates (Fe-290 Gde E-165) square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.

S&F rolled mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-410W Gde E-250 quality 'A' complete all as specified and directed.

M&L for Steel work in square or rectangular tubular purlins complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St-240 complete all as specified and directed.

M&L for pressed steel frames 105 x 60mm made out of 1.25 mm thick mild steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., and filling hollow of frame with plain cement 1:3:6 type C-1 (20mm graded aggregate) concrete, supplied and fixed complete all as specified and directed.

S&F 125 x 60 mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,hold fast includ etc., complete all as specified and directed.

M&L for aluminium powder coated frame (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

M&L Powder Coated (minimum thickness of powder coating 50 micron) Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.

M&L for powder coated aluminium (thickness of powder coating not less than 50 micron) window and ventilator shutters, side or top hung or sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays, hinges, suitable handles complete all as specified and directed.

S&F of fibre glass reinforced translucent corrugated sheeting 2mm thickness with two corrugations side lap fixed with coach screw and washer in roof, wall etc as per directed complete all as specified and directed.

M&L for Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall , fixed with L-type of J-type hook bolts in lieu of screws and washers in roofs etc complete all as specified and directed.

M&L for Pre-painted galvatume aluminium zinc coating GI based Plain steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall , fixed with L-type of J-type hook bolts in lieu of screws and washers in roofs etc complete all as specified and directed.

S&F for Polycarbonate sheeting 2mm thick in plain or color coated with side lap fixed with coach screw and washer in roof, wall incl connected items etc complete all as specified and directed

M&L for suspended false ceiling using mineral fibre board of size 600 x 600 x 15mm as ceiling over and including suspension metal(galvanised iron) system ) designer grid (15mm grid 8mm return) bevelled tegular suprafine XL 15mm / silhouete complete including necessary hanging system arrangement 6 mm dia suspenders as per manufacture's instruction which is required to be made from existing RCC roof/stone slab of building complete all as specified and directed. Make :- Armstrong(ANF RH 95) or equivalent make of Everest , Gypsum India Ltd, Bison and Aerolite.

M&L for rounding to edges of granite one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base to floor complete all as specified and directed.

M&L for 40mm thick PCC 1:3:6 type C1 using 20mm graded stone aggregate as in plinth protection, finished even and fair without using extra cement complete all as specified and directed.

M&L for Glazed ceramic colored tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set such as skirting, dados and riser etc including a layer of screed bed 10mm thick in cement mortar 1:4 and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile complete all as specified and directed

M&L Non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeing 0.06 sqm but n.exc 0.11sqm in floors etc set and including 15mm thick layer of screed bed in cm 1:6 on floor surfaces and jointed in neat cement slurry and pointed in white or coloured cement to match the shad of tile complete all as specified and directed.

M&L for Non-skid joint free ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

M&L for Non-skid joint free coloured ceramic tiles 7 to 8 mm thick (square/rectangular) cut out of tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for Non-skid joint free coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

S&F light shade Vetrified Ceramic digital tiles edge cut 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM (1:4) finished fair and even complete all as specified and directed.

M&L for designer Chequred Cement concrete tiles 30cm x 30cm x 25mm thick set jointed and pointed in neat cement concrete slurry in floors with grey cement and no pigments complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M&L for factory made M-25 grade cement concrete kerb stone fixed in position to the required line, level and curvature including necessary earthwork, jointed with cement mortar 1:4, making joints with or without grooves, thickness of joints not more than 5 mm (except at sharp curves) complete all as specified and directed.

M&L for Glossy/ Matte finish tiles in vertical surface 200mm x 300mm x 9mm to 300mm x 600mm x 9 mm thick set and including 10mm thick layer of screed bed in cm 1:4 on verticle surfaces and jointed in neat cement slurry and pointed in white or colour cement to match the surface of tiles as on verticle surfaces complete all as specified and directed by the Engr-In-Charge.

M&L for 10 mm thick plaster in CM 1:4 on ceiling surfaces or concrete surfaces finished even and fair without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 mixed with water proofing compound on faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 15 mm thick in CM(1:4) on brick walls or concrete surface, surface finished even and smooth without using extra cement complete all as specified and directed.

Taking down cement plaster including raking out joints, hacking for key scrubbing down with water etc built in CM complete all as specified and directed.

M&L for complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered or unplastered surfaces including filling of minor holes/ depressions etc with wall care putty and applying two coats of oil bound distemper of approved tint complete all as specified and directed.

M&L for preparing new plastered surfaces including scrapping and applying two coat of oil bound distemper complete all as specified and directed by Eng-in-Charge

M&L for complete removal plastered surfaces on ceiling and applying two coats of distemper oil emuslion over one coat primer complete all as specified and directed.

M&L for preparing new plastered surface by sand paper to obtain truely smooth surface and two coats of oil bound distemper paint by roller application over wall care putty of 1 mm thickness for internal wall complete all as specified and directed.

M&L for complete removal of exiting treatmetent, preparing surface by sand paper to obtain truely smooth surface, and two coats of exterior emulsion paint by roller application over water based akali resistant priming paint for external wall complete all as specified and directed.

M&L for preparing new plastered surface by sand paper to obtain truely smooth surface and two coats of exterior emulsion paint by roller application over wall care putty of 1 mm thickness for external wall complete all as specified and directed.

S&F frosted glass 5.0mm thick, pin head type & glazing with neoprene rubber beading in squares in aluminium frames complete all as specified and directed.

M&L for 5.5mm thick sheet glass plain or tinted not exc 0.5sqm in each pane, ordinary quality and glazing in existing snap beading and neoprene/rubber gasket in aluminium frames complete all as specified and directed.

M&L for Preparing new wood and wood based surfaces over 10 cm width or girth and two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome complete all as specified and directed.

M&L for 20 mm bore galvanised steel water tubing medium grade with all fittings complete fixed to wall and ceiling or laid in floors complete all as specified and directed.

Taking up or down Gl tubing 15mm dia, with connections complete all as specified and as directed

Taking up or down, 20mm dia bore, GI tubing, medium grade, removing from site, complete all as specified and as directed.

M&L for 3-layer PP-R 20 mm dia Polypropylene rando copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

M&L for 3-layer PP-R 25 mm dia Polypropylene rando copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

Dismantling of existing water tanks exc 500 but not exc 1000 ltrs capacity complete all as specified and directed.

S&F in rotational moulded polythene water storage tank (Cylindrical vertical with closed top ) hoisted and fixed in position 1000 ltrs capacity including disonnecting and refixing the GI pipe and fittings complete all as specified and directed.

M&L for chromium plated cast copper alloy fancy type long body bib taps with capstan heads screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe 15 mm bore, fixed in repairs complete all as specified and directed.

S&F in repair waste coupling brass chromium plated 32mm dia for wash hand basin complete all as specified and directed.

S&F in repair 20mm bore Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 15mm- 142 gms) complete all as specified and directed.

S&F in repair PVC connection 15mm dia 45cm long with 2 Nos brass check nuts with washer complete all as specified and directed.

S&F in repair PVC connection 15mm dia 60cm long with 2 Nos brass check nuts with washer complete all as specified and directed

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floor or trenches complete all as directed and specified .

M&L for 75 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F CP brass bottle trap 32mm size with 300 mm & 190 mm long wall conection pipes & wall flange complete all as specified and directed. Make : Jaquar Cat No : ALD-769L 300 X 190 / Kohler Cat No. K-73141N-CP or equivalent.

M&L for PVC (SWR) floor trap of 75 mm dia outlet, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F PVC grating 125mm dia of weight not less than 40gm for floor trap / Nahani trap complete all as specified and directed.

S&F in repair kitchen sinks with drain board made of stainless steel sheet 18 guage of Grade SS-304 incl plug, washer, brass sink coupling, waste pipe, bowl size 410x330x160mm and overall size 915mmx460mm including fixing to existing granite platform, connecting to pipe and taking down of u/s sink complete all as specified and directed.

Blank

S&F in repairs CP grating 100mm dia round with or without waste hole fixed on floor/nahani trap fixed with cement complete all as specified and directed.

S&F in repairs 15 mm concealed stop Cock with wall flange incl all fittings complete all as specified and as directed. Make Jaquar Cat No. CON-083 KN or equivalent

S&F in repair CP towel ring round complete all as specified and as directed. Make: Jaquar, CAT Part No AQN-7721 / Kohler Cat No. K-5631IN-CP / Roca Cat No. RA816070172

S&F as in repairs Double Coat Hook complete all as specified and directed. Model Jaquar ACN-1161N

S&F in repair Toilet paper holder complete all as specified and as directed. Make: Jaquar Code ACN-1153S / Kohler Cat No. K-56331N CP / Roca Cat No. RA816384001

S&F in repair Corner glass shelf (with bracket) complete all as specified and as directed. Make : Jaquar CAT Part No. ACN-1173 / Kohler / Roca or equivalent.

S&F in repair Soap dish complete all as specified and directed. Make Jaquar Code AQN-7731 / Kohler Cat No. K-56341N-CP / Roca Cat No. RA816070132

Supply and fixed in repair CP bib cock 15mm dia with crutch handle as approved fancy type long body complete all as specified and as directed. Make-Jaquar Con-107KN, Kohler Cat No. K-11749IN-9-CP / Cera Cat Part No. G1017152 / Roca Cat Part No. RT5A7820CA1

S&F in repair CP single towel rail 600 mm complete all as specified and as directed Make: Jaquar-AKP-35711PS / Kohler Cat No. K- 250651N-CP / Roca Cat No. RA816070165.

Supply and fixed in repairs CP angle cock 15mm dia fancy type cast coper alloy complete all as specified and directed. Make-Jaquar Cat. No. Con-053KN / Kohler cat No.K- 117911N-4A-CP / Roca Cat No. A5A154BC00

S&F in repair for CP hand shower (Health faucet) with 15 mm dia, 1.2 meter long flexible tube & wall hook with N.R.V (Back Flow Preventer) complete all as specified and directed. Make : Jaquar CAT Part No. ALD-577 / Kohler Cat No. K-129271N-CP / Cera Cat No. F8030105AB

Supply and fixed in repair CP bib cock 15mm dia with crutch handle as approved fancy type two way Bib Cock complete all as specified and as directed.Make-Jaquar Con-041KN, Kohler Cat No. K-37320IN-4- CP / Roca Cat Part No. RT5A9320CA1

S & F as in repairs Multipurpose Towel Rack, 65x20.3x11.3 cm complete all as specified and directed. Make Kohler SS304 or equivalent

S&F 5mm thick looking mirror of size 600mm x 450mm and looking mirror edges moulding, including hole 4 Nos for looking mirror and incl S S cap screw complete all as specified.

S&F in repairs CP overhead shower dia 110 mm round with revolving joints (with body rotation) & 115mm long arm shower with rabit cleaning system and all fittings complete all as specified and directed. Make - Jaquar OHS-1709 / Kohler Cat No. K-724191N-CP / Cera Cat No. F7010606AB / Roca Cat No. RT18700A1

S & F in repair hand shower 105 mm dia round shape multi flow with air effect (ABS Body & Face Plate Chromium Plated) with rubit cleaning system and incl Easy flex tube in chromium finish 1.5 meter long with both end nuts complete all as specified and directed. Make : Jaquar CAT Part No. HSH-1721 / Kohler Cat No. K-72421IN-CP / Cera Cat No. F7030113AB

Supply and fixed in repairs CP WHB mixture cast coper alloy with central hole for WHB and long shank fancy type 15 mm bore complete all as specified and directed. Make-Jaquar Cat. No. Con-167KNB / Cera Cat No. F2013461 / Roca Cat No. A5A474BC00

Supply and fixed in repairs CP brass hot and cold 15mm dia wall mixture 3-in-1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe, connecting leg & wall flange complete all as directed.Make-Jaquar Cat. Con-281KN, Kohler Cat No. K-16298IN-9-CP / Cera Cat No. F1019403 / Roca Cat No. RT5A1709CA1

S&F as in repairs LED Lite Looking Mirror 22 Inches x 15 Inches, made of premium quality “Saint Gobain” glass highly resilient and with great shine. Color Of The LED – Warm White with Smart touch switch or sensor that makes it glow as soon as one approaches the mirror, complete all as specified and directed.

S&F in repairs wash hand basin vitreous china white of size 800x475 mm with cabinet (Vanity) and including all fittings and bottle trap complete all as specified and as directed. Make : Somany S110527 / Parryware Cat No WPC897T1C / Cera CAB1042 .

Demolition of old Existing unserviceable EWC seat and S&F white rimless Single piece- WC with UF soft close slim seat cover, Hinges, fixing accessories and accessories set and cistern fittings. S trap incl all neccessories items complete all as specified and as directed. Make : Jaquar CAT Part No OPS-WHT-15853S300UF / Roca Cat Part No. RS34273700H / Kholer Cat part No. K-77739T-SL-0 / Cera Cat Part No. S1013245 .

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concretebut excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Dismantling precast concrete blocks in road kerbs built in cement mortar including cleaning serviceable blocks for re-fixing and removal of unserviceable material out of MoD land complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in in any position laid bedded and pointed in any mortar complete all as specified and directed.

Dismantling interlocking paver blocks of any description, laid dry including cleaning serviceable blocks for re-fixing and removal of unserviceable material out of MoD land laid dry or laid dry pointed complete all as specified and directed.

Demolition of PCC in ground floors and pavings not exc. 15cm thickness (below or above ground level ) complete all as specified and directed.

Demolition of cement concrete (reinforcement cut as per requirement) in Roofs, floors, beams, staircases, landing, chajjas and similar suspended workground floors and pavings any thickness complete all as specified and directed.

Dismantling boarding plywood etc of any description and in any position fixed with nails etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description such as purlins, truss for roof and window guard bars complete all as specified and directed.

Dismantling of structural steel work including doors, gates wind ties gutter supports etc complete all as specified and directed

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Taking down sub main wiring of copper/aluminium with PVC / Steel conduit complete all as specified and directed.

Taking down unserviceable DBs / Sheet Metal enclosure of any type, disconnecting carefully and making good distrubtion complete all as specified and directed.

M&L for point wiring complete with 1.5 Sqmm single core PVC insulated and unsheathed multi stranded copper conductor FRLS cable of 1100 V grade PVC insulated and unsheathed cable inclosed in concealed pvc conduit 20 mm dia medium grade with all accessories ISI marked, including MS sunken box modular type for mounting fitting like switches, sockets fan regulators modulor type etc. including 1.5 sqmm single core PVC insulated but unsheathed copper earth continuty conductor to common earth and connected FRLS cable 1100 V grade as continuous earth wire to earth dolly for followings :-

One light/fan/ bell point controlled by one, one way switch.

One 3 pin 5 Amp socket outlet on same board with other switches.

One 3 pin 5 Amp socket outlet on independent board with other switches.

All as per Item No 140 above but with 4 Sqmm copper cable for 3 pin 15 Amps socket outlet on independent board, including 4 Sqmm copper cable continuous earth wire and connecting to common earth dolly.

S&F switch, Modular type 230/250 volts ISI marked, complete all as specified and directed of following type rating :-

One way, 6 Amp, 1 module

One way, 16 Amp, 1 module

S&F Socket outlet of modular type multipurpose use, 230/250 Volts grade (ISI marked) on top cover complete all as specified and directed of following type & rating :

6A -2/3 pin combined, 2 module

6A/16A -2/3 pin combined, 2 module

M & L in repair Sub main wiring complete with 2 runs of 6 Sqmm single core PVC insulated unsheathed FRLS cable 1100 V grade with multistranded copper conductor ISI marked drawn through and including 25mm dia PVC rigid conduit and conduit accessories fixed on surface/wall celing etc including provision of 1 run of 6 Sqmm PVC insulated unsheathed cable with multistranded copper conductor as earth continuity incl taking down old U/s sub main, complete all as specified and as directed. Note : 2x6sqmm +1x6sqmm earth and one run of conduit shall be measure one unit.

Supply and fix factory made sheet distribution board double door protection class IP-42 double door type suitable for mounting MCB/MCCB conforming to IS 13032 IS- 8623 and BS 5484 with minimum 200 Amps bus bar of 8 Way SPN DB complete all as specified and as directed. (Note: Cost of wall cutting for suitable mounting of DBs in recess alongwith proper connection with suitable lugs and making good disturbed surfaces with PCC work will be inclusive in above item quoted price)

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning :

(i) SP 6 To 32 AMP

(ii) SPN 40 to 63 AMP

Supply & fix LED lights fitting 1x20 watt, 220V AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose all as specified and directd.

Supply and fix, testing and commissioning of Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5.0 KVA with time delay relay 2 to 3 minutes over load protection complete all as specified and directed.

S&F 20 amp, 240 Volt single pole and neutral enclosure with two pin and earth plug socket, metal enclosed plug top in power coated CRCA steel sheet enclosure recess mounted with chained metal cover for socket outlet with and including one number single pole 'C' series MCB 20 amp as required.

M&L for Earthing complete with galvanized steel earth plate 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized iron wire 4 mm dia as earthing lead by means of bolts, nuts, check nuts & washers of galvanized iron or steel besides building at all joints including excavation and earth work, GI pipe light grade 15mm bore for protection of GI wire from earth electrode, supply and laying charcoal dust, common salt, PCC (1:3:6) type B-1 using 20mm graded stone aggregate for chamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4) type B-1 using 20 mm graded stone aggregate Reinforced with 6 mm dia round bars @ 75 mm C/C both ways with MS handle 12 mm dia, PGI funnel and wire mesh, 20 mm bore GI Pipe medium grade for watering complete all as shown in electrical plate No 3 of SSR Part-I(1991) and connected to earth test point including testing complete all as specified and directed. Note : GI wire and protection pipe upto 7.5 meter from the earth plate electrode is deemed to be included in quoted rate.

Taking down and dismantaling Ceiling fan including accessories of any type or make,safely and refixing after oiling, greasing and servicing in serviceable condition duly painted by synthetic enamel paint of in white/off white colour complete all as specified and directed including writing MES nos.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 2.5 sqmm (Green), concealed in wall, drawn into and including rigid non metallic PVC conduit medium grade not less than 25 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and terminated in modular metal flush boxes for mounting switches, sockets, fan regulator as required for One 3 pin socket outlet 5 amps on the same board with other switches.

All as per item No. 152 here-in-before but one ceiling fan point controlled by one switch

All as per Item No 152 above but with 2.5 Sqmm copper cable for 3 pin 15 Amps socket outlet on independent board, including 2.5 Sqmm copper cable continuous earth wire and connecting to common earth dolly. Note for Item No 140 to 141 & 152 to 154 :- (a) The cost of Modular Metal flush box & modular cover plate colour and size as required at site and cutting chases in stone masonary and making good disturbed surfaces using CM 1:3 shall deemed to be included in quoted rate and the make of modular plate shall be of the same brand as per Switch/Socket accessories (b) Modular switch/socket accessories shall be measured & paid separately in respective items.

S&F ceiling rose 3 pin (phase,neutral and earth polycarbonate body complete.

S&F LED Fixtures with extruded polycarbonate, environmental friendly, slim design with decorative and caps, high performance diffuser for soft & glare free light, minimum lumen output 1900 lm with efficacy 110 lm/w. Driver with high voltage protection upto 380 VAC & surge protection upto 2.5 KV, CCT(K)-6500, LM 80 tested high brightness LED technology.

S&F LED mirror light adjustable type 12 watt 230 volt single phase 6500K complete all as specified and directed.

S&F ceiling fan type 1200 mm sweep 50 Hz AC 230 volts, BEE 5 star rated in white colour with with brushless direct current motor (BLDC), blade set , 0.45 mtr down rod, canopy complete all as specified and directed.

S&F in replcement MCB distribution board, powder coated, SPN , 240 volts, 12 ways,CRCA steel sheet, degree of protection IP 43 - IK 09 with reversible double door, recess mounted, having insulated 200 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning.

PUSHPA G ENTERPRISES (BID ID -3189364)

V S Constructions (BID ID -3193737)

Chaudhary Constructions (BID ID -3193837)