PROVN OF 08 X OR TOILETS AND CONNECTED WORKS NEAR ATTACHED LINE AT 512 LT AD MSL REGT SP IN ARMY AREA 01 X TOILET BLOCK IN CAMP AT CARIAPPA PARADE GROUND AND 01 X BATHROOM BLOCK AT CPG UNDER GE EAST DELHI CANTT 10

Amount

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/loose soil etc complete all as directed and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation of shafts, wells, cesspits, manholes, pier holes, etc n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Returning filling in including spreading leveling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.

Removing excavated material n exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting pointcomplete all as directed and directed.

M&L PCC 1:4:8 type D-2 (using 40 mm graded stone agg) as in foundation complete all as specified & directed.

M&L for RCC M-25 (20mm graded aggregate) as in foundations footings, plinth beams etc all as specified & directed.

M&L for RCC M-25 (20mm graded aggregate) as in columns, pillars etc all as specified & directed.

M&L for RCC M-25 (20mm graded aggregate) as in beams, lintels etc all as specified & directed.

M&L for RCC M-25 (20mm graded aggregate) as in chajjas etc all as specified & directed.

M&L for RCC M-25 (20mm graded aggregate) as in slab type Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as directed and directed.

S&F TMT bars upto 10mm dia and over, cut to length, bent to shape required,including crancking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

S&F TMT bars 5mm and over upto and including 10mm dia in stirrups, spacers and binders bent to shape required,including binding with mild steel wire (annealed) not less than 0.9mm dia complet all as specified.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as directed and directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as directed and directed.

Form work to soffit of suspended slabs such as roof slabs, floor slabs, landings and similar work, n exc 200mm thick (horizontal or sloping) complete all as directed and directed.

M & L formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressumers, lintes,cantilevers, shelves including supports, overhangs, etc also splays beteen floors and beams finished rough surfaces of concrete complete all as specified.

Formwork to chajjas, chullah hoods, similar items including edges all as specified.

M & L form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide complete all as specified.

M&L brick work with sub class B bricks, straight or curved on plan exc 6 m mean radium built in CM 1:4 all as specified and as directed.

M&L half brick wall with sub class B bricks, straight or curved on plan exc 6 m mean radium built in CM 1:4 all as specified and as directed.

M & L hardcore of broken stone or boulders of gauge exc.63mm but n exc 100mm, deposited,spread and levelled in layers n exc. 15 cm thick, watered and well rammed to a true surface.

M&L 75 mm thick PCC 1:4:8 type D2 using 40 mm graded aggregate as in sub base complete all as specified and as directed.

M&L Glazed ceramic tiles 300x450x7mm thick, in vertical surfaces such as skirting & dados set and jointed in neat cement slurry and pointed in coloured cement to match including backing coat of 10mm thick CM 1:4 on brick masonry/concrete surfaces finished even to receive tiles complete all as specified and as directed.

M&L Non skid ceramic tiles (400x400x7mm thick) in floors set and jointed in neat cement slurry and painted with colour cement to match including Screed bed (or) bedding layer of mortar 15mm thick for laying floor finishes CM (1:6) complete all as specified and as directed.

M&L for coloured chequered cement concrete tiles 30cmx30cmx2.5cm ,machine pressed; set jointed and pointed in neat cement slurry in floors, with grey cement and pigments laid over 15 mm thick screed be in CM 1:6 complete all as specified.

M & L 75mm th PCC 1:3:6 type C-2 as plinth protection, finished even and fair without using extra cement complete all as specified.

S & F for rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, quality confirming to Fe-290 (Gde-E-165) complete all as specified.

M&L for 1.25mm thick mild steel, plain, black sheet in wall cladding, steel gates, door shutters, covering to door chowkats and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

S&F solid PVC door frames of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified & directed

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & gap insert for top rail & bottom rail, paneling of plain color PVC sheet to be fitted in the MS frame, welded/sealed to the stiles & rails with suitable PVC sheet beading & jointed together with solvent complete all as specified & directed.

S&F Steel ventilators with centre hung shutter including two pairs of brass cup pivots, catch spring and pulley wheel, complete all as specified and as directed

S&F 3mm thick figured glass I pin head type and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed.

S&F125 mm long,aluminium,anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 125mm size aluminium handles,cast type,anodised complete all as specified and directed.

S&F 100mm butt hinges extruded aluminium alloy with galvanised MS pin anodised type C22 all as specified and as directed.

S&F rotational moulded polythene water storage tank (Cylindrical vertical withclosed top)hoisted and fixed in position of 1000 ltrs capacity fixed with PVC tank nipples,complete all as specified in SSR Part I complete all as specified and directed.

S & F gun metal globe or gate valve with iron wheel screwed both edns for iron pipe of 20 mm dia complete all as specified and as directed.

S&F ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for 20mm dia iron pipe and fixed.(Minimum weight 210gm) complete all as specified and directed.

M&L rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces & finishing the surface even & smooth without using extra cement complete all as specified & directed.

M&L rendering 15mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces & finishing the surface even & smooth without using extra cement complete all as specified & directed.

M&L Rendering 5mm thick on concrete surfaces in CM 1:4 as on ceiling complete all as specified and directed.

Material and labour for APP polymaric water proofing membrene minimum 3mm thick and weighting not less than 3.6 kg / sqm of make 'Moply FP' manufactured by STP Texsa Ltd or' Hyper Plas' ( polyster) manufactured by M/S IWL Ltd or'Shaliplas' (polyster) manufactured by M/S Capital Steels and chemicals Pvt Ltd or 'Mak polyplast' manufactured by M/S M K Petro as approved by GE , black finished reinforced with non weven polyster matt,with fusable inish laid over compatable bitumen primer at the rate of 0.40 Ltr/Sqm torching overlaps with a propane or abutane gas torch, with f a over lap of 75mm at the sides and100 at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufactur's instructions including 0.40 Ltr/Sqm torching overlaps with a propane or abutane gas torch, with f a over lap of 75mm at the sides and100 at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufactur's instructions including preparation of surface, complete all as specified and as directed. Note : the water proofing treatment shall be carried out by the manufacturer or their authorised applicators.

M&L applying two coats of synthetic enamel paint over a coat of red oxide or zinc chromate primer including preparation of new steel or iron surfaces exc 10 cm width or girth, complete all as specified and directed.

M & L applying two coats of cement based paint on newly plastered or unplastered wall surface including preparation of surfaces, complete all as specified and directed.

M&L three coat of white wash including preparation of new surfaces as on walls complete all as specified and as directed.

M&L three coat of white wash including preparation of new surfaces as on ceiling complete all as specified and as directed.

S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 15 mm bore GI tubing complete all as specified and as directed.

S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing complete all as specified.

S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 25 mm bore GI tubing complete all as specified.

S&F Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms) for iron pipe or for brass ferrule complete all as specified and directed.

S & F chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed..

S&F Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm- 92gms) , screwed both ends for iron pipe of 15 mm bore complete all as specified and directed.

S & F PVC connection 15x450mm size complete all as specified and directed.

M&L Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4)complete all as specified and directed.

S&F counter type vitreous china,white, wash hand basin, flat back size 550x400mm including cutting for and pinning in, including waste pipe complete all as specified and as directed

M&L 18-20mm thick granite slabs of any type machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone over 15mm thick screed bed in CM 1:6, including grinding and polishing complete all as specified and directed.

S&F Soap dish vitreous China white, approximate size 160x 160x90mm, fixed to plugs with chromium plated brass screwscomplete all as specified and directed.

S&F 20mm dia brass chromium plated tubular towel rails,D type,60cm long between flanges,complete all as specified and directed.

S&F15 mm dia Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms, screwed for 15mm dia pipe complete all as specified and directed.

S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills,steps,and other similar bands,plinth courses, string courses, lacing courses, parapets and railing upto 60cm height, copings, kneelers, apex stone, bed plates and the like including weathering slightly rounded or chamfered angles and throating, complete all as specified and directed.

M&L for PCC 1:2:4 type B 1, using 40 mm graded stone aggregate as surface channels and drains incl fair finishing complete all as specified and directed.

Supply only 9 Ltrs (PVC) white, valve less, syphonic action type, dual type flushing cistern, low level with inlet ball valve, float and top push button type, complete all as directed. Note:- The rate for fixing flushing cistern are deemed to be included with the rate of fixing water closet any type, complete all as specified and directed.

Supply only 32mm dia flush pipe of polythelene of low or high density, for low or high level flushingh cistern. Note:- The rate for fixing flush pipe are deemed to be included with the rate of fixing water closet any type, complete all as specified and directed.

S&F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including P or S trap including provn of lime concrete bedding including connections to 'flushing cistern/pipe complete all as specified and as directed.

M&L PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150 mm dia SWSW pipe complete all as specified & directed.

DWCPE (SN8) nominal size 150 mm (internal dia) mm including all fixing accessories or fittings like socket/spigot joint with elastomeric sealing ring, rubber ring, SILAID rubber lubricants required for laying of pipes, laid in trenches, complete all as specified and directed.

S&F 100mm dia Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors or on the walls complete all as specified and as directed.

S&F CI bends 150mm, laid and jointed, complete complete all as specified and directed.

S&F CI Single 'Y' junctions 150mm laid and jointed, laid and jointed, complete complete all as specified and directed.

M&L precast RCC 1:2:4 type B1 as in landings, cover slab,chajjas etc.and similar articles with plain faces set in CM 1:6, complete all as specified and directed.

Cutting in to existing manholes for connecting new drains, making good to pipe & rendering cutting out existing benching for and forming branch channel in cement concrete1:2:4 type B-1 smooth finished and reforming benching as required for 150 mm bore drain pipe complete all as specified and directed.

Excavation over areas, n exc 1.5m deep and getting out in hard/dense soil complete all as specified and directed.

M&L sand filling under floor or in foundations including watering and consolidation complete all as specified and directed.

M&L 25mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in filling under floor, complete all as specified and directed.

M&L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and no pigment complete all as specified and as directed.

M&L Joist, channel, angle, or tee sections, fixed as in doors , balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc, complete all as specified and directed.

S&F 300mm long Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy all as specified and as directed.

S&F Hold fastsflat iron 25x3mm complete all as specified and directed.

Preparing surfaces of hold fasts,area tarred n.exc 0.10 Sqm each and treated with tar or coal tar back paint complete all as specified and directed.

M & L for rendering 10mm thick in cement plaster 1:3 on concrete surfaces as on ceiling using 2% WPC ( water proofing compound ) complete all as specified and directed.. (Note: WPC paid separately).

Supply only integral water proofing compound, complete all as specified and directed.

Cutting chases, pinning in , for concealed water tubing on block walls, making good to facing where required and pointing in cement mortar 1:3, not exc 10 cm girth. complete all as specified and directed.

S&F 15 mm dia bib tap cast copper alloy (fency type), chromium plated ,'with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed.

S&F stop valve cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe of 15 mm bore complete all as specified.

S&F 100mm internal dia of SGSW pipes laid in trenches and jointed with cement mortar 1:3 complete all as specified and directed.

S&F 150mm internal dia of SGSW pipes laid in trenches and jointed with cement mortar 1:3 complete all as specified and directed.

S&F 100mm SGSW, Y Junction, fixed with solvent cement, complete all as specified and directed.

S&F 150mm SGSW, Y Junction, fixed with solvent cement, complete all as specified and directed.

S&F 100mm SGSW bends any radius complete all as specified and directed.

S&F 150mm SGSW bends any radius complete all as specified and directed.

S&F vitreous china,white, wash hand basin, flat back size 550x400mm 'including MS brackets including cutting for and pinning in, but excluding waste pipe, complete all as specified and directed.

S&F vitreous china,white, padestal suitable for wash hand basin, flat back size 550x400mm complete all as specified and directed.

S&F Vitreous china half stall urinal (back or corner wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 , securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement fixing flush Pipe, grating & union for discharge Pipe complete all as specified and directed.

S&F15 mm dia brass chromium plated pillar tap, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut, capstan head, screwed for 15mm dia pipe complete all as specified and directed.

M&L for point wiring complete with 1.5 Sq mm (nominal area) FRLS, PVC insulated un-sheathed and stranded copper conductor cable ISI marked and including PVC concealed conduit ISI marked of size 20 mm dia medium grade and PVC conduit fittings such as tees, bends, elbow, reducers except conduit junction box (junction box will be of MS) including FRLS, PVC insulated unsheathed 1.5 Sqmm copper earth wire, connecting to common earth dolly with and incl Metal flush box of suitable size for fixing modular switches/sockets/fan regulator etc , with and including Modular cover plates of suitable size and making good surface as original by plastering, whitewash/colour and distemper etc complete all as specified and directed for the following :- (Note : The cost of modular type Metal boxes and modular accessories like cover plates will be included in quoted rate.):

(a) one light point / fan point/ wall fan point/ bell/ buzzer controlled by one 1-way switch/ bell push.

(b) one socket outlet point 5 amps on the same board.

(c) one socket outlet point 5 amps on the independent board.

All as per srl item no.97 here-in-before but with 2.5 sq mm FRLS copper wire with 1.5 Sqmm FRLS copper earth wire for 15 Amp light point complete all as specified and directed.. Note : The point wiring for power point will not be mixed with light/fan point circuit or not in the same conduit pipe.

M&L for Sub main wiring with 2 run of 4.0 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to separate PVC concealed conduit 25 mm dia with and including 4.0 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB complete all as directed.- Note : 1. The conduit and conduit accessories shall be measured and paid as one unit. 2. The cost of earth wire is included in the quoted rates.

Supply and fixing of Switch Piano flush type, single pole, one way, 5/6 Amps complete all as specified and directed.

Supply and fixing of socket two-in-one, 5 pin, 5/6 Amp universal type complete all as specified and directed.

Supply and fixing of Switch16 Amp,single pole one way complete all as directed.

Supply and fixing of socket out let 6/16 Amp, flush typecomplete all as specified and directed.

M&L for Ceiling rose, insulated body, 3 terminal, 240 volts, 5 Amps with and including pressed steel powder coated MS sunken box of suitable size, covered with & including 3 mm thick bakelite, laminated hylem sheet top cover and making good surface as original by plastering and whitewash/ colour/ distemper etccomplete all as specified and directed. Note : The cost of MS sunken box and bakelite sheet is included in the quoted rate.

Supply and fixing of LED tube light fitting, 20/22 watt. wall mounting type with and including all electric connections with two core PVC insulated, PVC sheathed copper conductor flexible cable, complete all as specified and directed. Make : Havells/Philips/CG/Syska Cat Part No-SSK-SQ 2201-22W.

S & F of LED Mirror light 10/ 12W diffuser, driver and making all electrical connections complete as directed

Supply & fix exhaust fans AC single phase 230/ 240 V of size 300 mm sweep heavy duty with louver and making all electric connections complete all as directed.

Supply and fixing of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc and making all necessary connections complete all as specified and directed.

Supply and fixing of MCB C Curve type, 10 kA, 10 to 32 Amp, Single Pole with over load and short circuit protection complete all as specified and directed.

Supply and fixing of MCB C Curve type, 10 kA, 40 to 63 Amp, SPN with over load and short circuit protection complete all as specified and directed.

Material and labour for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sq. mm 2 core ISI marked in service connections, suspended by insulating hanger (not more than 1 mtr apart) including all connections from main panel to main DB with thimbles of suitable size, including taking down of old unserviceble cable of any size complete all as specified and directed.

Excavation in trenches in loose/soft soil not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep and getting out including forming bottom surface for laying LT cable as specified and directed at site by Engineer-in-Charge.

Returning filling in soil including spreading, levelling, watering and well rammingin layers not exceeding 25 cm complete as specified and directed by the Engr-in-charge.

Removing excavated soil not exceeding 50 mtr and depositing wheredirected at a level not exceeding 1.5 mtr above the starting point complete as specified and directed by the Engr-in-charge.

M&L for sand cushioning to under ground cable provided with layers of sand (8 cms deep before laying the cable and 15 cms deep after laying) complete allas specified and directed at site by Engineer-in-Charge.

Supply and laying burnt bricks class - B for protection of cable complete all as specified and directed at site.

M&L for earthing complete with GI earth plate electrode 600 mmx 600mm x 6mm thick burried directly in ground not less than 2.25 mtrs below ground level, with top edge of the plate not less than 1.5 mtrs deep below normal ground level, connected to galvanised earth wire 4mm by means of bolts, nuts check nuts to earth test point including necessary PCC 1:2:4 type B-1 pit, cover frame, GI pipe 15mm dia light grade for protection of earthing lead and GI pipe 20 mm dia for watering pipe with funnel, wire mesh, salt, charcoal dust and excavation complete all as directed.

Supply and fixing of LED security light luminaire 40 watt pressure die cast aluminium housing with heat resistance toughned glass & IP- 66 protection with and including driver/transformer complete all as directed.

Supply and fixing of street light fitting bracket, 1.5 mtr long made out of galvanized iron pipe of 40 mm dia size light grade complete with nut, bolts, washer etc inclusive of one primer coat, one under coat and one finishing coat of silver paint complete all as directed.

Supply and fixing of sheet metal enclosure, single pole and neutral enclosure with a two pin and earth plug and socket complete with single pole MCB 32 Amps, 10 KA complete all as specified and directed.

Supply and fix of geyser 50 ltrs capacity with copper tank complete incl necessary nuts, bolts and including making necessary electric/water connection incl mason works complete all as specified and as directed.

Fresh air fan 250 mm sweep plastic body type including making hole of appropriate size for fixing of ventilating fan and all electric connections complete all as specified and directed

S & F of MCB SP C Curve type suitable for 240 volts AC supply, with over load and short circuit protection and rupturing capacity not less than 10 KA complete all as specified and directed and 10 to 32 Amps.

S & F of MCB SPN C Curve type suitable for 240 volts AC supply, with over load and short circuit protection and rupturing capacity not less than 10 KA complete all as specified and directed and 40 to 63 Amps.

Supply and fixing of LED security light luminaire 60 watt (white) Five star Rating pressure die cast aluminium housing with heat resistance toughned glass & IP- 66 protection with and including driver/transformer complete all as directed.Make:Philips/Havells/Syska. Cat Part No-SLG 40 W.

M&L in replacement for laying of Galvanised iron tubes light grade 80mm dia for cable protection at site complete all as specified and directed

sunil traders

imran construction company

S.K. ENTERPRISES

SHIV INFRA

M/S GR construction compony

M/s Shubh Enterprises