Special repair works for the existing 1 No. of SI and 22 Nos. of PC/HC quarters with additional quarters at THIRUGOKARANAM in Pudukkottai District

Amount

24) Manufacturing & supply of steel windows (weight basis)

30) Finishing the top of flooring with cement concrete 1:3, 20mm thick Ellispattern flooring (No sand)

37.1) White washing 3 coats (slaked)

52) Supplying, laying, fixing and jointing the following dia PVC pipes as per ASTM D-1785 of schedule 40 including the cost of suitable PVC/GI/GM specials a. 32 mm dia

b. 25 mm dia

Annexure 8.4.1) Standardized Concrete mix M20 Grade using crushed stone sand with Admixture c. In Second Floor

9.6.1) Brick work in C.M. 1:6 using Kiln Burnt Country bricks of size 22x11x7cm (8 ¾ " x 4 ¼ " x 2 ¾ ") using crushed stone sand with Admixture c. In Second Floor

21.5.2) Supplying and fixing of soild UPVC door shutter with frame

23.2.1) Supplying and fixing of 4mm thick pin headed glass panels with Aluminium beedings

28.1) Finishing the top of flooring in C.M. 1:4, 20mm thick. using crushed stone sand with Admixture

29.8.1) Supplying and fixing of Glazed tiles using Grout (Tile Joint Filler) using crushed stone sand

29.9.1) Supplying and laying of Floor ceramic tiles (Anti-skid) using Grout (Tile Joint Filler). using crushed stone sand

32.1.1) Pressed tiles (23cmx23cmx20mm thick) mixed with water proofing compound @ 2% by weight of cement using crushed stone sand

33.1) Plastering in C.M. 1:5, 12 mm tk. using crushed stone sand with Admixture

35.2) Spl. Ceiling plastering in C.M 1:3, 10 mm tk. using crushed stone sand with Admixture

37.2) White washing two coats for old ceiling surfaces

38.4.1) Two coat of Oil Bound Distemper over the primer coat of white cement

38.4.3) Painting the old walls with two coats of Oil Bound Distemper

38.6) Primer coat using one coat of white cement over the cement plastered/ concrete new wall surfaces or other similar works

40.1) Two coats of painting over the old wood work including Removing old paint from doors, windows & wood works by manual labour

41.1) Two coats of painting over the old iron work and other similar works including Removing old paint from iron surface with sand paper

43.1) Supplying, Fabricating and fixing of Mild steel / RTS grills (without cement slurry wash) reinforcement for all sizes of rods

44.6) Supplying and fixing of PVC SWR 110 mm dia with ISI mark type-A for rain water down fall pipe

51.1) Supplying and fixing of HDPE water tank 700 lit capacity with ISI mark

52.4) Supplying laying fixing and jointing the following dia PVC pipes as per ASTM D-1785 of schedule 40 threaded PVC water supply ASTM pipe (fully consealed in walls) with necessary PVC/GI/GM specials c. 20mm dia

54.1.1) Supplying and fixing of 15mm dia Half turn Brass core C.P. Tap (long body)

54.2.1) Supplying and fixing of 15mm dia Half turn Brass core C.P. Tap (Short body)

56.3.2) Supplying and fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR Grade 'P' or 'S' trap - in G.F. using crushed stone sand

56.4.2) Supplying and fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR Grade 'P' or 'S' trap - Other than G.F. using crushed stone sand

57.2) Supplying and fixing of EWC (White) 500mm with PVC SWR grade "P" or "S" Trap

58.3) Supplying and fixing of PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia

60.1) Supplying and fixing of PVC Nahani trap (4way/2way)

61.1.1) Supplying and fixing of UPVC Non Pressure Pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 b) 160mm dia UPVC Non Pressure pipe

100) Supplying and fixing of 9 watts LED Bulb

102) Supplying and fixing of 4'18 watts crystal LED tube light fittings

104) Supplying and fixing of 12 watts LED bulb for bulk head fittings

119) Supplying and delivery of single phase 2 HP submersible pumpset suitable for borewell

119.1) Supplying and delivery of 3 HP clear water vertical wet type submersible pumpset three phase suitable for borewell

120) Labour charges for erection of submersible pumpset in borewell / openwell upto 5 HP

121.1) Supplying and delivery of single phase panel board of direct online starter with two level guard and auto start 2 HP

121.2) Supplying and delivery of three phase panel board of direct online starter with two level guard and auto start 3 HP

123) Supplying and Delivery of PVC insulated and sheathed 3 core 4 sq.mm flat type copper cable for submersible pumpset

124) Supplying and delivery of following dia GI pipes 'B' class in position for Pumpset suction pipe arrangements a) 32mm dia GI pipe

124.1) Labour charges for fixing the following dia GI pipe for Pumpset suction pipe arrangements in the Sump a) 32mm dia GI pipe

126.1) Supplying and fixing of following dia M.S. Clamp set a) 150 mm dia MS clamp set

127) Supplying and delivery of required dia Nylon rope for tieing of submersible motor pump

128) Supplying of 32mm dia Cast Iron Adopter

132) Drilling of 150mm dia borewell in hard rock areas

132.1) Charges for developing the Borewell with Air compressor of 600 CFM capacity (Minimum 8 Hrs)

133) Supplying and fixing of following dia PVC casing pipe as per IS 12818/2010 a) 150mm dia PVC Casing Pipe (Casing Shallow depth)

134) Supplying and fixing of 160mm dia PVC end cap suitable for covering the 150mm dia borewell casing pipe

134.2) Supplying of following dia UPVC pipe for Borewell a) 32mm dia UPVC pipe

796) Two coat of Exterior emulsion paint including special primer for outer wall surfaces

796.1) Painting the old outer walls with two coats of Exterior emulsion paint without primer and including thorough scrapping

800.1) Dismantling, clearing away and carefully stacking materials useful for re-use of Reinforcement cement concrete by manual / by using deploying machineries

800.2) Dismantling, clearing away and carefully stacking materials useful for re-use of One Course of Pressed Tile Roof finish in cement mortar

800.3) Clean removal of cement plaster from the existing wall surfaces

800.4.1) Dismantling clearing away and carefully stacking materials useful for reuse of brick masonry in cement mortar walls a) Under 3.00m height

M.Mohamed Hussain