SPECIAL REPAIR TO BLDG NO. ET-125 AT HATTIGOR AND OTHER SANCTIONED WORK AT DARRANGA AND HATTIGOR MILITARY STATION UNDER GE RANGIA

Amount

Dismantling Unframed timber scantlings 40 Sqcm and over in section and in any position complete all as specified and as directed by Engineer-in-charge.

M&L for 2nd class hardwood in scantling wrought timber unframed and fixed complete all as specified and as directed by Engineer-in-charge.

S&F Mild steel work in hand rails, wind ties, posts and struts in fencing screwed or welded to shape as directed, including all necessary drilling, bolting or riveting etc., and similar works complete all as specified and as directed by Engineer-in-charge.

Demolition of reed lathing single or double including battens and plaster or chicken wire lathing complete all as specified and as directed by Engineer-in-charge.

M&L for brick work with sub-class `B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed by Engineer-in-charge.

M&L for G.I. Wire netting 0.9 mm dia and 12 mm mesh lathing to wood or metal studding, joists, etc., in walls, ceilings, stanchions, beams, etc., including all laps, cutting and waste complete all as specified and as directed by Engineer-in-charge.

M&L for rendering 15 mm thick on fair faces of brick work or one side of lathing in cement mortar 1:4, surface finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.

M&L for rendering 10 mm thick on other than fair faces of brick work or on other side of lathing in cement mortar 1:6, surface finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.

Dismantling of unframed fillets, rails, posts, rafters, purlins etc., under 40 Sqcm in section complete all as specified and as directed by Engineer-in-charge.

Dismantling of wall and ceiling boards (Fibre, pulp, insulation etc) of any thickness, including cover fillets complete all as specified and as directed by Engineer-in-charge.

M&L 4 mm thick E-board fixed to frame with screws, including powder coated GI frame (snap grid) work for false ceiling and 1 mm thick G.I. wire hangers complete all as specified and as directed by Engineer-in-charge.

M&L for preparing new plastered surface and applying two coats of distemper oil emulsion on wall surfaces over a coat of alkali resistant primer complete all as specified and as directed by Engineer-in-charge.

M&L for preparing new plastered surfaces and applying two coats of cement base paint on surfaces of walls including primer complete all as specified and as directed by Engineer-in-charge.

M&L for preparing surfaces of wood and wood based materials, new or old of any description and girth, not otherwise described and treated with two coats of creosote oil complete all as specified and as directed by Engineer-in-charge.

M&L for preparation of newly untreated wood or wood base surfaces of any description, not exceeding 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engineer-in-charge.

Dismantling Asbestos Cement (Corrugated, Semi corrugated etc.) sheets in roof coverings etc. complete all as specified and as directed by Engineer-in-charge.

S&F pre-painted gavalume aluminium zinc coating GI based semi-corrugated/corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as per specified and as directed by Engineer-in-charge.

S&F pre-painted gavalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as per specified and as directed by Engineer-in-charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc. 15 cm thickness (below or above ground level) complete all as specified and as directed by Engineer-in-charge.

M&L 75 mm thick Cement concrete type C-2, 1:3:6 (using 40 mm graded stone aggregate) in footpath / hardstanding / pavings / plinth protections, finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.

S&F Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over 15 mm thick screed bed or bedding layers in CM 1:6, complete all as per specified and as directed by Engineer-in-charge.

M&L glazed ceramic tiles (coloured) of size 300 x 200 x 6/7 mm thick on vertical surfaces such as dados, skirting, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including backing 10 mm thick in CM 1:4 complete all as per specified and as directed by Engineer-in-charge.

Taking down shutters of any description not exceeding 1 Sqm each complete all as specified and as directed by Engineer-in-charge.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and as directed by Engineer-in-charge.

S&F 35 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., without sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., as specified in SSR Pt I Section 8, clause 8.24 (a) and as directed by Engineer-in-charge.

S&F 30 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided into squares with plain, chamfered or rounded mitredand rebated sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. for windows and ventilators, etc are provided with stiles and rails as specified in SSR Pt I Section 8, clause 8.24 (b) and as directed by Engineer-in-charge.

S&F 35 mm thick second class hardwood kiln seasoned and chemically pressure treated plain framed panelled shutter (Two panel) with lock rail and panel of 10 mm bison panel as specified in SSR part I section & clause 8.24 (a) complete all as specified and as directed by Engineer-in-charge.

S&F 3 mm thick sheet glass, ordinary quality in squares not exceeding 0.5 Sqm in each pane fixed with cut & mitred beads complete all as specified and as directed by Engineer-in-charge.

S&F 4.8 mm thick sheet glass, ordinary quality in squares not exceeding 0.5 Sqm in each pane fixed with cut & mitred beads complete all as specified and as directed by Engineer-in-charge.

S&F in repair stainless steel wire cloth, 0.56 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and as directed by Engineer-in-charge.

S&F 300 mm long helical door spring of approved quality complete all as specified and as directed by Engineer-in-charge.

S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed by Engineer-in-charge.

S&F 125 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed by Engineer-in-charge.

S&F 125 mm long Aluminium alloy handles, fabricated type, anodised complete all as specified and as directed by Engineer-in-charge.

S&F 150 mm long Aluminium alloy handles, fabricated type, anodised complete all as specified and as directed by Engineer-in-charge.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and as directed by Engineer-in-charge.

S&F 75 mm long extruded Aluminium alloy anodised butt hinges with galvanized mild steel hinge pin type C-21 complete all as specified and as directed by Engineer-in-charge.

S&F 100 mm long extruded Aluminium alloy anodised butt hinges with galvanized mild steel hinge pin type C-21 complete all as specified and as directed by Engineer-in-charge.

Demolition of brick work built in any cement mortar complete all as specified and as directed by Engineer-in-charge.

Taking down cement plaster on brick wall of any description, including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed by Engineer-in-charge.

M&L rendering 15mm thick on brick or concrete surfaces in cement mortar 1:6 to be finished fair & even without using extra cement complete all as specified and as directed by Engineer-in-charge.

S&F solid PVC wall panelling consisting of 5 mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC fillet in any position with screws complete all as specified and as directed by Engineer-in-charge.

S&F 5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame complete all as specified and as directed by Engineer-in-charge.

M&L for preparing old painted plastered surfaces including washing, rubbing and stopping and applying one coat of cement base paint on surfaces of walls complete all as specified and as directed by Engineer-in-charge.

Excavating in trenches, not exc. 1.5 m wide and not exc. 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc. 10 sqm on plan and not exc. 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed by Engineer-in-charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm complete all as per specified and as directed by Engineer-in-charge.

Removing excavated material (soil) not exc. 50m and depositing where directed at a level not exc. 1.5 m above the starting point complete all as per specified and as directed by Engineer-in-charge.

M&L 75 mm thick PCC (1:4:8) type D-2 (using 40 mm graded crushed stone aggregate) as in sub-base of flooring/hard standing complete all as specified and as directed by Engineer-in-charge.

S&F 38 mm glass dividing strip 3 mm thick and inserted in position conform to design complete all as specified and as directed by Engineer-in-charge.

M&L plain cement concrete type C-2, 1:3:6 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed by Engineer-in-charge.

M&L plain cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in coping complete all as specified and as directed by Engineer-in-charge.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out soft/loose soil complete all as specified and as directed by Engineer-in-charge.

M&L for PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation filing and mass concrete complete all as specified and as directed by Engineer-in-charge.

M&L for brick work with sub-class `B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-charge.

M&L for providing precast cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate as in landings, cover slabs (for manholes, etc.) shelves and similar articles with plain faces and set in CM 1:4 complete all as specified and as directed by Engineer-in-charge.

M&L for cement concrete bed to drain pipe 100mm bore (Internal) in cement concrete (1:3:6) type C-2 with using 40mm graded crushed stone aggregate including packing under and haunching against the sides of pipes after they are laid and tested complete all as per specified and as directed by Engineer-in-charge.

S&F MS steel work in tubular trusses including special shaped washers etc. Using ERW or induction butt welded tubes confirming to IS-1161-1979 graded St240 with one shop coat of zinc chromate primer paint complete all as specified and as directed by Engineer-in-charge.

M&L for mild steel TMT bars of 6mm to 8mm dia, cut to length, bent to shape required including cranking bending spirally & binding with and in including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed by Engineer-in-charge.

M&L 50 mm thick Cement concrete type C-2, 1:3:6 (using 40 mm graded stone aggregate) in footpath / hardstanding / pavings / plinth protections, finished even and smooth using extra cement including spike rolling to make impresssion of expanded metal while concrete is green complete all as specified and as directed by Engineer-in-charge.

S&F second class hard wood wrought fillets in square, rectangular or triangular in section, clean swan secured with screws or beads having sectional area exc.13sqcm but not exc. 25 sqcm complete all as specified and as directed by Engineer-in-charge.

S&F second class hard wood plain fillets in rectangular tringular in section clean sawn secured with nails of sectional area exc. 6sqcm but not exc. 13 sqcm complete all as specified and as directed by Engineer-in-charge.

Dismantling of timber boarding of any description fixed in any position with nails complete all as specified and as directed by Engineer-in-charge.

M&L for 2nd class hardwood in scantling wrought timber framed and fixed complete all as specified and as directed by Engineer-in-charge.

S&F 20 mm thick planed one side second class hard wood boarding with butt joints clean sawn fixed with nails in any situation (except flooring and skirting) complete all as specified and as directed by Engineer-in-charge.

S&F 50 mm thick second class hard wood boarding with butt joints clean sawn fixed with nails in any situation (except flooring and skirting) complete all as specified and as directed by Engineer-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as per specified and as directed by Engineer-in-charge.

M&L for 40 mm thick plain cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in sub-base complete all as specified and as directed by Engineer-in-charge.

S&F solid PVC door frame of size 50x47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed by Engineer-in-charge.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed by Engineer-in-charge.

S&F 15 mm bore Galvanized Steel tubes, medium grade, with all fittings complete all as per specified and as directed by Engineer-in-charge.

S&F 20 mm bore Galvanized Steel tubes, medium grade, with all fittings complete all as per specified and as directed by Engineer-in-charge.

Cutting into existing steel tubing for alterations or additions of 20 mm dia of pipes complete all as per specified and as directed by Engineer-in-charge.

S&F bib tap 15mm bore cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron plate or for brass ferrule complete all as per specified and as directed by Engineer-in-charge.

S&F 15mm bore pillar tap, fancy type, cast copper alloy with capstin head CP screwed down high pressure with or without littered 'H' or 'C' with long screwed shank and fly nuts screwed for iron pipe complete all as per specified and as directed by Engineer-in-charge.

S&F 20mm bore stop valve screwed down high pressure with crutch or butterfly handle screwed both end for iron pipe complete all as specified and as directed by Engineer-in-charge.

S&F 15mm bore stop valve screwed down high pressure with crutch or butterfly handle screwed both end for iron pipe complete all as specified and as directed by Engineer-in-charge.

S&F chromium plated shower rose 125 mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified and as directed by Engineer-in-charge.

S&F 15mm dia PVC connection pipe with PTMT nuts of length 450mm complete all as specified and as directed by Engineer-in-charge.

S&F Vitreous China Ware Wash hand basin white, flat back of size 550 x 400 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand including waste couplings complete all as per specified and as directed by Engineer-in-charge.

M&L for preparation of new or previously untreated surfaces of wood and wood based surfaces of any description not other wise described of over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as per specified and as directed by Engineer-in-charge.

M&L for preparation of old or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint (Ordinary tint) complete all as per specified and as directed by Engineer-in-charge.

M&L for preparation of new or previously untreated steel surfaces of any description not otherwise described over 10cm girth or width and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as per specified and as directed by Engineer-in-charge.

M&L for preparing newly plastered surfaces of walls and applying three coats of white wash complete all as per specified and as directed by Engineer-in-charge.

M&L for preparing plastered surfaces of walls and applying two coat of white wash complete all as per specified and as directed by Engineer-in-charge.

M&L for 20mm thick Granite stone slab, machine cut, as in floors, skirting/dado, etc. laid over cement screed layer 15 mm thick in CM 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as per specified and as directed by Engineer-in-charge.

M&L for RCC type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves complete all as specified and as directed by Engineer-in-charge.

M&L for mild steel TMT bars 10 mm dia. and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips, complete all as per specified and as directed by Engineer-in-charge.

S&F 15 mm bore fancy type chromium plated bib tap, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as per specified and as directed by Engineer-in-charge.

S&F 75mm PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as per specified and as directed by Engineer-in-charge.

S&F sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915 mm x 460 bowl size 410 mm x 330 mm x 160 mm, complete all as per specified and as directed by Engineer-in-charge.

S&F 110 mm dia PVC (SWR) pipes single socketed, in any length, laid in trenches or in floors, complete all as per specified and as directed by Engineer-in-charge.

M&L for preparing old plastered surface and applying two coats of oil bound distemper on wall surfaces complete all as specified and as directed by Engineer-in-charge.

Surface dressing not exc. 15 cm deep in soft/loose soil, complete all as per specified and as directed by Engineer-in-charge.

M&L for hardcore of guage not exc. 63mm deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface of broken stone or boulders, complete all as per specified and as directed by Engineer-in-charge.

M&L for 100 mm thick plain cement concrete type B-2, 1:2:4 (using 40 mm graded stone aggregate) as in pavement/hardstanding surface finished fair and smooth complete all as specified and as directed by Engineer-in-charge.

Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance not exc. 50 m and making good surfsce in soft/loose soil, complete all as per specified and as directed by Engineer-in-charge.

S&F rolled MS section frame work of Angle Iran as in vertical post fixed with cleat and connecting plate etc. including necessary welding, drilling etc. complete all as per specified and as directed by Engineer-in-charge.

S&F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates of grade Fe 410-W (Gde- E- 250) quality- A complete all as per specified and as directed by Engineer-in-charge.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of grade Fe 410-W (Gde- E- 250) quality- A complete all as per specified and as directed by Engineer-in-charge.

M&L for 100 mm thick plain cement concrete type D-2, 1:4:8 (using 40 mm graded stone aggregate) as in sub-base/floor surface complete all as specified and as directed by Engineer-in-charge.

M&L for Machine cut kota stone slab flooring 20 - 25 mm thick over 15 mm thick cement screed bed in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and polishing complete all as per specified and as directed by Engineer-in-charge.

M&L plain cement concrete type B-2, 1:2:4 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed by Engineer-in-charge.

S&F fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with L-type or J-type or cranked hook bolts in roof covering or cladding to wall complete all as specified and as directed by Engineer-in-charge.

M&L precast coloured cement concrete chequered tiles 300x300x25mm thick set jointed and pointed in with grey cement and pigment laid over and including 20mm thick screed bed in CM 1:4 in floorings, complete all as per specified and as directed by Engineer-in-charge.

S&F powder coated aluminium anodised frame work for fixing of glass with one or more rebates including joining cleat, rubber, etc. for fixing complete all as per specified and as directed by Engineer-in-charge.

Supply & fix aluminium (anodised) grill made out of 7mm wide flat, square, ractangular or similar section, fixed with channel of size 38mm x 12 mm x 13mm all as per manufacturer's specifications complete all as per specified and as directed by Engineer-in-charge.

M&L for 40 mm thick, 2nd class hard wood, plain, framed paneled shutters (any number of panels) with panels of timber flat on both side (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers etc complete all as per specified and as directed by Engineer-in-charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as per specified and as directed by Engineer-in-charge.

S&F GI wire cloth, 0.56 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and as directed by Engineer-in-charge.

S&F 100 mm mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and as directed by Engineer-in-charge.

S&F 150 mm mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and as directed by Engineer-in-charge.

S & F 75 mm long medium weight, cold rolled mild steel Butt hinges complete all as per specified and as directed by Engineer-in-charge.

S & F 100 mm long medium weight, cold rolled mild steel Butt hinges complete all as per specified and as directed by Engineer-in-charge.

S&F 100 mm long mild steel pressed handles, oval type, stove enamelled black complete all as per specified and as directed by Engineer-in-charge.

S&F 125 mm long mild steel pressed handles, oval type, stove enamelled black complete all as per specified and as directed by Engineer-in-charge.

S&F 300 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as per specified and as directed by Engineer-in-charge.

M&L for treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as per specified and as directed by Engineer-in-charge.

M&L for treatment of soil along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as per specified and as directed by Engineer-in-charge.

M&L for ATT at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same complete all as per specified and as directed by Engineer-in-charge.

Taking down carefully aluminum/copper point wiring (light, fan, socket or power) complete incl fittings and fixtures such as switches, sockets, light fittings, ceiling rose, pendants, lamp holders, shade conical, regulators and removing all removed fittings and fixtures with wiring cable, battons, wooden boards etc from site and making good disturbed surfaces of walls, floors, ceiling etc all complete all as per specified and as directed by Engineer-in-charge.

Taking down carefully U/S main switches and DB’s including wooden bds and removing from site incl making good disturbed surfaces of walls all complete all as per specified and as directed by Engineer-in-charge.

Dismantling of house service brackets of any size and type and making good the distrubed wall surfaces complete all as per specified and as directed by Engineer-in-charge.

M&L for point wiring with 1.5 sqmm size (nominal area) PVC insulated single core multi stranded copper conductor cable drawn into and incl PVC conduit of adequate width and length with all accessories and fittings like bends, elbow, crosses and GI box, inner plate, combined plate cover for modular fittings etc like switches, sockets and fan regulator incl 1.5 sqmm size PVC insulated multistranded copper conductor cable as earth continuity conductor and connected to earth dolly for one light point controlled by one switch complete all as per specified and as directed by Engineer-in-charge.

All as per serial item no. 125 above but for one fan point controlled by one switch.

All as per serial item no. 125 above but for socket combination 5 Amps on independent board.

All as per serial item no. 125 above but for 5 amp socket on same board.

All as per serial item no. 125 above but with 4 sqmm (nominal area) cable with 4.00 sq mm size copper earth continuity conductor of green colour for 15 A socket outlet on independent boards .

S&F modular switch, single pole, 5 AMPs, 230 volts complete all as specified and as directed by Engineer-in-charge.

S&F modular socket outlet 3 Pin 5/6 AMPs shuttered socket with ISI marking complete all as specified and as directed by Engineer-in-charge.

S&F modular switch for 15/16 Amps with neon indicator complete all as specified and as directed by Engineer-in-charge.

S&F modular socket outlet 3 Pin 6/16 A shuttered socket with ISI marking complete all as specified and as directed by Engineer-in-charge.

S&F stepped type 4 Step Fan Regulator - 1 module electronic fan regulator on the existing laminated sheet (plate) etc. as reqd including necessary electric connection complete all as specified and as directed by Engineer-in-charge.

S&F ceiling rose three terminals PVC/Polycarbonate, isolated body complete all as specified and as directed by Engineer-in-charge.

S&F Regal batten for LED, wall mounted and LED tube 20 W (double side connection) 4ft, 230V, complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor of suitable size complete all as specified and as directed by Engineer-in-charge.

S&F reccess mounted luminaire with high brightness LED light fittings high efficiency glare free uniform light distribution 2x2 ft recess LED edge lit luminaire including driver 36 watt, 230V, complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed by Engineer-in-charge.

Supply and fix lamp holder, PVC/Polycarbonate type with back plate including 10 watt LED bulb complete all as specified and as directed by Engineer-in-charge.

S&F PVC rectangular block for mounting, DBs, etc. with 3mm thick plastic laminated sheet cover of size 350x300 & 50 mm deep complete all as specified and as directed by Engineer-in-charge.

S&F single pole & neutral 8 way DB with single door, complete all as specified and as directed by Engineer-in-charge.

S&F triple pole & neutral 4 way DB with single door, complete all as specified and as directed by Engineer-in-charge.

S&F triple pole & neutral 6 way DB with double door, complete all as specified and as directed by Engineer-in-charge.

Supply and fix MCB FOUR POLE 415 Volts 100 Amps breaking capacity 10 kA rating 'C' series complete all as specified and as directed by Engineer-in-charge.

Supply and fix MCB THREE POLE 415 Volts 63 Amps breaking capacity 10 kA rating 'C' series complete all as specified and as directed by Engineer-in-charge.

Supply and fix MCB SPN 240 Volts 40 Amps breaking capacity 10 kA rating 'C' series complete all as specified and as directed by Engineer-in-charge.

Supply and fix MCB SP 240 Volts 6-32 Amps breaking capacity 10 kA rating 'C' series complete all as specified and as directed by Engineer-in-charge.

Taking down old ceiling fan/exhaust fan and refixing only serviceable fans after testing to its original position/location and handing over old unserviceable ceiling/exhaust fans to MES store yard complete all as specified and as directed by Engineer-in-charge.

S&F Ventilation fan refresh air of size 250 mm sweep, 230 Volt, single phase, Plastic body, outside opening louvers, fixed in wall complete all as specified and as directed by Engineer-in-charge.

S&F exhaust fan refresh air of size 300 mm sweep, 230 Volt single phase, Metalic body, outside opening louvers, fixed in wall complete all as specified and as directed by Engineer-in-charge.

M&L for earthing with Galvanised Iron Earth Plate Electrode 600X600X6mm size buried directly in Ground vertically at a depth not less than 2.25 METRE below Ground Level with the Top Edge of Earth Plate at a depth not less than 1.50 METRE below Ground Level connected to Galvinased earth lead wire 4.0mm dia by means of Bolts, Nuts, Check Nuts and Washers of Galvanised Steel, Earth Plate Electrode surrounded by a packed thickness of Char Coal or Coke Dust mixed with common Salt in alternate layers not exc. 150mm thick including Galvanised Iron Pipe 25mm Bore (dia) Light Grade, upto test points above the Floor Level of the Building situated including PCC Pit in Cement Concrete 1:3:6 (20mm Graded Stone Agg-regate) and RCC Cover of size 540X540X50 mm in RCC 1:2:4 (20mm Graded Stone Aggregate) einforced with and including 8.0mm dia TMT Bars @ 100mm centre to centre both ways including taking down old unserviceable one complete all as specified and as directed by Engineer-in-charge.

Supply, laying and testing of cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 50 Sqmm 3.5 core including taking old unserviceable cable complete all as specified and as directed by Engineer-in-charge.

S&F sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and as directed by Engineer-in-charge.

M&L for sub-main wiring along with earth wire of sizes 2 x 6.0 sqmm and 1 x 6 sqmm earth continuity conductor and connected to earth dolly, PVC insulated single core multi stranded copper conductor cable drawn into and incl PVC conduit of adequate width and length with all accessories and fittings like bends, elbows, crosses, etc.including taking old unserviceable wiring complete all as specified and as directed by Engineer-in-charge.

M&L for sub-main wiring along with earth wire of sizes 4 x 10.0 sqmm and 2 x 10 sqmm earth continuity conductor and connected to earth dolly, PVC insulated single core multi stranded copper conductor cable drawn into and incl PVC conduit of adequate width and length with all accessories and fittings like bends, elbows, crosses, etc.including taking old unserviceable wiring complete all as specified and as directed by Engineer-in-charge.

OUTGOING :- (i) MCCB of capacity 125 Amps 4 pole, 415 volts 50 Hz, 3 phase breaking capacity 25 KA - 01 Nos (main DB). (ii) MCCB of capacity 63 Amps 4 pole, 415 volts 50 Hz, 3 phase breaking capacity 25 KA - 02 Nos ( AC DB & one being spare). (iii) On load Change over switch advance neutral 160 Amps open execution, rotary handle complete, 415 volts, 50 Hz 3 phase 4 pole - 01 No. (iv) MCB TPN 40 Amp , 415 Volt,10 KA-01. (v) MCB 32 Amp , SPN Volt,10 KA-03.

Supply and filling of sand in and around LT cables 80mm thick below the cable and 150mm thick after laying the cable and gently punning down to180mm thickness complete all as specified and as directed by Engineer-in-charge.

Supply & Laying of Sub-Class 'B' Bricks, well burnt, laid breadth wise along the length of cable laid in trenches laid for UG cable protection, complete all as per specified and as directed by Engineer-in-charge.

M&L for point wiring with 1.5 sqmm size (nominal area) PVC insulated single core multi stranded copper conductor cable drawn into and incl PVC casing capping sleeves and caps of adequate width and length with all accessories and fittings like bends, elbow, crosses and PVC rectangular block with 3mm thick plastic laminated sheet cover as directed for mounting fittings etc like switches, sockets and fan regulator incl 1.5 sqmm size PVC insulated multistranded copper conductor cable as earth continuity conductor and connected to earth dolly for one light point controlled by one switch complete all as per specified and as directed by Engineer-in-charge.

All as per serial item no. 159 above but for one ceiling/exhaust fan point controlled by one switch.

All as per serial item no. 159 above but for one 5 Amps socket on independent board.

All as per serial item no. 159 above but for one 5 Amps socket on same board.

All as per serial item no. 159 above but with 4 sqmm (nominal area) cable with 4.00 sq mm size copper earth continuity conductor of green colour for 15 A socket outlet on independent boards .

Supply and fix switch piano type 5 Amp single pole one way complete all as specified and as directed by Engineer-in-charge.

Supply and fix socket outlet, flush type, 5 Amp complete all as specified and as directed by Engineer-in-charge.

S&F switch socket combination 5 in 1, 05/16 Amps flush type with neon indicator complete all as specified and as directed by Engineer-in-charge.

S&F switch socket combination 05/06 Amps flush type complete all as specified and as directed by Engineer-in-charge.

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd including necessary electric connection complete all as specified and as directed by Engineer-in-charge.

S&F PVC rectangular block for mounting, DBs, etc. with 3mm thick plastic laminated sheet cover of size 250x200 & 50 mm deep complete all as specified and as directed by Engineer-in-charge.

S&F single pole & neutral 4 way DB with double door, complete all as specified and as directed by Engineer-in-charge.

Supply and fix MCB SPN 240 Volts 32 Amps breaking capacity 10 kA rating 'C' series complete all as specified and as directed by Engineer-in-charge.

S&F 1100 volts grade heavy duty cable PVC insulated and sheathed aluminum conductor in service connections suspended by insulating hangers not more than 1 m apart including 4 mm suspension wire one twin core cable flat or circular of 10 Sqmm size with multistranded conductor complete all as specified and as directed by Engineer-in-charge.

S&F House service bracket(Hook type) complete with 3.0m long G.I pipe 40mm dia medium grade, two nos. 90 degree bends, M.S hook and stay or guy complete all as specified and as directed by Engineer-in-charge.

S&F electric water heater, storage type, metal body, 25 litres capacity, BEE 5 star rated, fixed by using min 2 Nos 75 mm long MS fasteners, nuts and washers and making all necessary electric connection complete all as specified and as directed by Engineer-in-charge.

S&F brass CP connection 15mm dia and 45 cm long with 2 Nos brass check nuts with washers for geyser, complete all as specified and as directed by Engineer-in-charge.

S&F angular stop cock 15 mm dia size with wall flange made of cast copper alloy, chromium plated fancy type, complete all as specified and as directed by Engineer-in-charge.

S&F sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB 25 Amps complete all as specified and as directed by Engineer-in-charge.

M&L for sub-main wiring along with earth wire of sizes 2 x 4.0 sqmm and 1 x 4 sqmm earth continuity conductor and connected to earth dolly, PVC insulated single core multi stranded copper conductor cable drawn into and incl PVC conduit of adequate width and length with all accessories and fittings like bends, elbows, crosses, etc.including complete all as specified and as directed by Engineer-in-charge.

S&F single pole & neutral 4 way DB with single door, complete all as specified and as directed by Engineer-in-charge.

Supply & laying 25 mm dia High density polyethylene pipes (HDPE) for Cable protection of pressure rating 6 kgf/cm2 laid in trenches complete all as specified and as directed by Engineer-in-charge.

Supply & laying XLPE insulated, armoured heavy duty electric cable in trenches, wall, floor with aluminium conductor, 1100 volts grade, cross-sectional area 6 sqmm, 2 Core complete all as specified and as directed by Engineer-in-charge.

S&F sheet metal enclosure 2 way including MCB SPN 16 Amps complete all as specified and as directed by Engineer-in-charge.

Supply and fixing new genration post top light, IP-65, long life aesthetically with symmentrical light distribution, spun aluminium landscape luminaire with high power LEDs, suitable for 50/75 mm dia pipe complete all as specified and as directed by Engineer-in-charge. Make - Havells cat No. CORALPT25WLED757PSYMTOPC or equivalent model of makes mentioned in the "LIST OF PRODUCTS FOR INCORPORATION IN THE WORK" of Particular Specification.

Supply and fixing integral LED bulb post top lanterns, PDC aluminium spigot for 2 x 18 W lamp holder, spun aluminium canopy, with funnel shape opal/clear diffuser and accessories complete all as specified and as directed by Engineer-in-charge. Make - Bajaj cat No. BJCPTI 218 Opal or equivalent model of makes mentioned in the "LIST OF PRODUCTS FOR INCORPORATION IN THE WORK" of Particular Specification.

Supply and fixing decorative gate light made up of high grade unbreakable polycarbonate material suitable for 20 W LED lamp, suitable for mounting on pole of dia.(max.) 60mm complete all as specified and as directed by Engineer-in-charge. Make - Havells cat No. LHFXBON1TN6F035 or equivalent model of makes mentioned in the "LIST OF PRODUCTS FOR INCORPORATION IN THE WORK" of Particular Specification.

Supply and fixing decorative gate light made up of high grade unbreakable polycarbonate material suitable for 07 W LED lamp, suitable for mounting on pole of dia.(max.) 60mm complete all as specified and as directed by Engineer-in-charge. Make - Havells cat No. LHFXBON1TN6F023 or equivalent model of makes mentioned in the "LIST OF PRODUCTS FOR INCORPORATION IN THE WORK" of Particular Specification.

Supply and fixing decorative gate light made up of high grade unbreakable polycarbonate material suitable for 20 W LED lamp, suitable for mounting on pole of dia.(max.) 60mm complete all as specified and as directed by Engineer-in-charge. Make - Havells cat No. LHFXBON1TN5Q020 or equivalent model of makes mentioned in the "LIST OF PRODUCTS FOR INCORPORATION IN THE WORK" of Particular Specification.

Supply and fixing decorative gate light made up of high grade unbreakable polycarbonate material suitable for 20 W LED lamp, suitable for mounting on pole of dia.(max.) 60mm complete all as specified and as directed by Engineer-in-charge. Make - Havells cat No. LHFXBON1TN5Q014 or equivalent model of makes mentioned in the "LIST OF PRODUCTS FOR INCORPORATION IN THE WORK" of Particular Specification.

Supply & Fix GI Pipe, 'light grade', galvanised, with all fitting for light post of Size 50 mm complete all as specified and as directed by Engineer-in-charge.

Supply & Fix GI Pipe, 'light grade', galvanised, with all fitting for light post of Size 40 mm complete all as specified and as directed by Engineer-in-charge.

Material & labour for PCC Type C-1 1:3:6 (20 mm graded stone aggregate) for light post foudation & coping complete all as specified and as directed by Engineer-in-charge.

S&F single pole & neutral 8 way DB with double door, complete all as specified and as directed by Engineer-in-charge.

Supply and fix MCB SPN 240 Volts 63 Amps breaking capacity 10 kA rating 'C' series complete all as specified and as directed by Engineer-in-charge.

S&F 1100 volts grade heavy duty cable PVC insulated and sheathed aluminum conductor in service connections suspended by insulating hangers not more than 1 m apart including 4 mm suspension wire one twin core cable flat or circular of 16 Sqmm size with multistranded conductor including taking down old unserviceable cable complete all as specified and as directed by Engineer-in-charge.

Supply and fix metal body exhaust fan of 450 mm Sweep, Single phase, 230 Volt, 50 HZ , Heavy duty copper wound motor, double ball bearing, 900 RPM, with outside opening louvers made up of MS sheet complete all as specified and as directed by Engineer-in-charge.

Supply and Fixing 15 W security light fittings suitable for new generation energy saving & environmental friendly long life LED street light made up of pressure die-cast aluminium housing with high efficient LED as lighting source and PC cover having TOP opening seperate driver compartment with IP66 protection and impact resistance of IK07 complete all as specified and as directed by Engineer-in-charge. Make - Havells cat No. ENDURAPEARLSL15WLED757SASYTOPCMP or equivalent model of makes mentioned in the "LIST OF PRODUCTS FOR INCORPORATION IN THE WORK" of Particular Specification.

S&F street light bracket made out of GI tubing 25 mm bore medium grade 1.20 Mtr long bend to required shape as in bracket for street light fittings fixed with two pair or MS flat iron 40mm x 5mm size and 30cm long clamp of required shape with bolts nuts and washers suitable for steel tubular pole including painting of mild steel flat iron surfaces with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in-charge. Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ.

OM CONSTRUCTIONS

SHARMA ENGINEERING ENTERPRISES

M/S KIRAN ENTERPRISE