Supply, Installation and commissioning of Portable Co-ordinate measuring machine and all the concomitant accessories. details are attached in Technical Specification and Terms & Conditions

Special Eligibility Criteria

1. 1

   EARNEST MONEY DEPOSIT : 1) Tenderers are required to deposit Earnest Money equivalent to the amount mentioned in the tender document. Tenderers not submitting Earnest Money should clearly indicate in their offer the reasons for the same, and failure to do so will be taken as unwillingness on their part to deposit the Earnest Money and such offers without requisite Earnest Money will be summarily rejected. Tenderer not falling in the exempted categories as mentioned in the subsequent para shall submit the Earnest Money only through Payment Gateway Facility on the IREPS Portal. Earnest Money shall be accepted only via the online system as available on IREPS portal. No other mode of the submission of Earnest Money is acceptable except in case of Global Tenders. 2) There shall be no exemption from submission of Earnest Money for any tender or by any tenderer except following: (a) Limited Tender Cases (including Single Tender and Global Limited Tender) of value limit up to Rs. 25 (Twenty-five) Lakh. (b) Micro & Small Enterprises (MSEs) registered with agencies mentioned at Para 2.4.1 (i) of Instruction to Tenderer attached with the Tender. (c) Other Railways and Government Departments. (d)I ndian Ordinance Factories. (e) PSUs owned by the Ministry of Railways and PSUs for the group of items that are manufactured by them. (f) Vendors registered with Northeast Frontier Railways for the trade group of the item tendered. (g) Vendors appearing on the approved vendor list of RDSO/PUs/CORE, subject to approval status being valid on the date of tender closing. (h) Vendors registered with Railway Board/Northeast Frontier Railways for supply of medicine, medical equipments and consumables shall be exempted from submission of EMD for these items. (i) In tender issued against PAC, OEM in whose favor PAC has been issued shall be exempted from submitting EMD. KVIC shall be exempted from EMD for items supplied by them. 3) If authorized agent participates on behalf of OEM, such authorized agent can not claim EMD exemption based on its own or its OEMs MSE certificate. 4) Offers of tenderers, who do not submit Earnest Money, and are also not exempted from submission of Earnest Money shall be summarily rejected. The Purchaser reserves the right to forfeit the Earnest Money Deposit if the tenderer withdraws or revises his offer within the validity period. The Purchaser also reserves the right to forfeit the Earnest Money deposit, if the Bidder fails to deposit Security Money in terms of Clause-12 of the Instructions to Tenderers.

   Document optionalConfirmation required
2. 2

   Bid Security Declaration : Bidders claiming for EMD exemption shall submit Bid Security Declaration under heading "BID SECURING DECLARATION" as per mentioned format, which is as, "I/we hereby understand and accept that if I/we withdraw or modify my/our bids during the period of validity, or if we are awarded the contract and on being called upon to submit the performance security/security deposit, fail to submit the performance security/security deposit before the deadline de fined in the request for bid document/notice inviting tender, I/we shall be debarred from exemption of submitting bid security/ Earnest money deposit and performance security/security deposit for a period of 6(SIX) months, from the date l/we are declared disqualified from exemption of EMD/SD for all tenders for procurement of goods issue by any unit of Indian railways published during this period ".

   Document optionalConfirmation required
3. 3

   QUALIFYING REQUIREMENTS OF TENDERERS : i. Bulk order will be placed on the manufacturer or its authorized agent. The manufacturer firm must have satisfactorily executed at least one single purchase order for a minimum of 20 percent of the total tender quantity of Zonal Railways/ PUs/ CORE for the tendered item [OR] for the items having same specification, but of different sizes/ ratings/capacities, during 5 (five) previous financial years and current financial year up to date of tender closing. Purchase Officers can consider such firms for bulk order duly keeping in view the overall performance of the firm. ii. All other offers, who are otherwise not eligible for regular bulk order(s) due to their not meeting with the eligibility conditions mentioned in Para 2.2(i) above and provided they are able to demonstrate their Capacity-cum Capability to manufacture the tendered item, can be considered only for developmental order up to 20 percent of the net procurablequantity. For this purpose, they should submit along with their offer, documented past performance reports of same or similar items of equivalent rating or equivalent performance parameters, details of M&P, testing facilities, QAP (if available), technical manpower available with them, registration for same/similar item(s) with other Government agencies or PSUs etc. or any other details as may be warranted as per the technical specification and drawing. Such tenderers are to note that non submission of such documents as per Annexure shall be taken as their not having any such past performance and/or capacity, and their offer shall be considered further as per extant rules and no back reference in this regard will be made to them. iii. The onus of submission of requisite documents (such as copies of Receipt note for stock items, receipt & acceptance for non-stock items, capacity & capability credentials, M&P required for manufacturing tendered

   Document optionalConfirmation required
4. 4

   item, T&P, technical manpower, in house testing facilities, MSE credentials, financial credentials, PAN no/ ITCC etc.) along with their e-offer regarding 'Bulk order' or 'Developmental order' lies with the tenderers. In case the tenderers do not submit the requisite documents as detailed above along with their e- offer, the tender will be decided on the basis of their past supply performance records as available with Northeast Frontier Railway [if any]. iv. Only Manufacturers or their authorized dealers/ distributors need to quote with Tender specific authorization from the manufacturers failing which offer will be summarily rejected. v. In case tenderers participates as an authorized agent, then the performance as required above shall be that of the principal, authorizing the agent. It may so happen that the agent has credentials of past supply for a different Principal but this will not be considered as performance for placing bulk order in case of change of Principal. OEM Authorization : 1) Manufacturers or their authorized Distributor/ Dealer/Agent with Tenders specific authorization can only quote. OEMs can authorize and give Tender Specific Authorization to its Agent / dealers to quote on their behalf provided the manufacturer takes full responsibility for the quality of the material including warranty obligation and the inspection of product against Railways order is carried out at the manufacturers premises. The offer without Tender Specific Authorisation Letter will be summarily rejected if tenderer is not manufacturer/OEM 2) In case tenderer participates as an authorized agent, then the performance as required above shall be that of Principal authorizing the agent. It may so happen that the agent has credentials of past supply for a different Principal but this will not be considered as performance for placing order in case of change of Principal.

   Document requiredConfirmation required
5. 5

   Technical-Compliance : The tenderers shall give para/clause wise comments on the technical specification to indicate whether the equipment offered fully meets the tender specifications. The offer shall be accompanied with complete details of technical parameters/ brochure/ pamphlets for quoted equipment with model number, if any.

   Document requiredConfirmation required

Check List

1. 1

   Offers validity : The offer should be kept valid for 120 days from the date of opening of the tender.

Commercial-Compliance

1. 1

   Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

   Document optionalConfirmation required
2. 2

   Firm must be GST registered with concerned statutory authorities, otherwise offer will be summarily rejected. All the bidders / tenderers should ensure that they are GST compliant and their quoted tax structure rates are as per GST Law. In case the successful tenderer is not liable to be registered under CGST/IGST/UTGST/SGST Act, the Railway shall deduct the applicable GST from his/her/their bills under Reverse Charge Mechanism (RCM) and deposit the same to the concerned tax authority.

   Document optionalConfirmation required
3. 3

   Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

   Document optional

1. 1

   Payment Terms: No deviation from the Payment Terms stipulated in the tender is permitted.

2. 2

   Validity of Offer: No deviation from the offer validity period stipulated in the tender is permitted.