REPAIR MAINTENANCE OF LT OH LINES PANELS SWITCH GEARS LIKE APFC PANELS AND UG CABLES INCLUDING ALL CONNECTED WORKS AND REPAIR MAINTENANCE WORK OF EXTERNAL WATER SUPPLY DAY TO DAY COMPLAINTS FOR BLDGS AT VARUNAPURI DCRA UWR DAD BLDGS UNDER AGE EM II

Amount

REPAIR / MAINT OF LT OH LINES, PANELS, SWITCH GEARS LIKE APFC PANELS & UG CABLE INCLUDING ALL CONNECTED WORKS UNDER AGE EM-II OF GE (NW) VASCO

Excavation in trenches not exc 1.5 Mtr wide and not exc 1.5 Mtr deep in soft/disintegrated rock getting out and levelling of bottom surface to required level .

Removing excavated material of soils from site to a distance not exc 50mtr away and depositing where directed not exc 1.5mtr from the starting point.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm thick.

Material & Labour for LT Cable XLPE insulated heavy duty armoured sheathed 1100 volts grade 120 Sq mm, 3½ core, with aluminium conductor, ISI marked as per IS : 7098(Part-1) complete including taking down old unserviceable as specified.

All as per item No 1.04 here in befor but of size 185 sqmm

All as per item No 1.04 here in befor but of size 240 sqmm

All as per item No 1.04 here in befor but of size 95 sqmm

All as per item No 1.04 here in befor but of size 70 sqmm

Material & Labour for Clear Sand for cushioning under ground cable 8 cm below and 15 cm above in trenches / cable duct filling complete in level all as specified.

Material & Labour for Un-reinforced precast concrete cable cover, class LV, type 1, flat, size 250mm x 150mm x 40mm in trenches for protect to under ground cable complete.

Supply, install, testing and Commissioning of APFC Panel of capacity 150 KVAR with relay 06 step auto/manual operation suitable for improving PF up to unity Double door type Panel factory made, CPRI approved, Outdoor Type, Weather, Dust and vermin Proof, fabricated Of 3 mm thick CRCA sheet (size not less than 1200x1000x500mm), Duly Powder Coated with 7 Tanks Process with Metalized Poly Propylene (MPP) type capacitor bank heavy duty of 150 KVAR with variable correction with Copper Bus Bar of suitable size and mounted on M.S. Angle Frame of 50x50x6mm with Double Door and Locking arrangement to facilitate easy Maintenance with, IP 52 protection cable alley, cable entry hole at the bottom and mounting on PCC (1:3:6) platform raised at 30 cm above Floor level with the following Accessories:-

(h) Internal power and control wiring with suitable size of PVC insulated copper wire and LED indicating lamps. (j) Multifunctional Meter WL4410110000 – 1no. (k) Indicating Lamps – 3sets. (l) 6 Stage APFCR Relay for controlling variable correction of KVAR.

Supply & Fixingin repairs Manufacture of LT Control panel board Main Distribution Panel, Outdoor Type, Double Door, factory made, fabricated out of 3 mm thick CRCA sheet (size not less than 2500x1000x1000mm) suitable for 3 Phase, 4 wire, 415 volts 50 Hz, AC supply, bus bar chamber with Copper bus bar of size (80X10) 1000 Amp rating for 3 phase and neutral 4 wire system duly insulated with Powder Coated and mounted on M.S. Angle Frame of 50x50x6mm. Provision for fixing ACB, MCCB, MC/change over swicth / inter connections, common earth bus bar of GI Strip 32 x 6 mm at bottom with panel board at two earth terminals, cable glands with independent plates at bottom for each out going and in coming cables in cable alley panel and Including 150 KVAR Capacitors Bank etc. with the following incoming and out going accessoriesall as approved and comprising as under : - Location : New Leading MAP Sub Stn.

Outgoing :- (g) 160A 4P MCCB 25KA – 6nos. (h) 200A 4P MCCB 25KA – 5nos. (j) Timer and Contactor for Street Light – 1set. (k) 25KVAR Capacitor MPP Heavy Duty – 6nos. (l) 63A TP MCB, Capacitor Duty Contactor, Auto Manual Switch, Push Button. (k) APFCR Rely 8 stages for controlling variable correction of KVAR (l) Material & Labour for necessary fixing arrangements by drilling and provn of fdn bolts in the existing floor complete - 01 job

Supply & Fixingin repairs LT Control panel board, outdoor type,double door, floor mounted, overall size not less than 1200 x 1000 x 400 mm, having independent compartment for bus bar, incoming feeder and each out going feeders, dust and vermin proof & lockable, factory made, fabricated out of 3 mm thick CRCA sheet suitable for 3 Phase 415 volts 50 Hz, AC supply, bus bar chamber with copper bus bar of 200 Amp rating for 3 phase and neutral 4 wire system duly insulated with heat shrinkable type sleeves as per colour code, supported on epoxy insulators - 01 Set incl necessary copper cables of suitable size for MCCBs/MCBs / change over swicth / inter connections, common earth bus bar of GI Strip 32 x 6 mm at bottom with panel board at two earth terminals, cable glands with independent plates at bottom for each out going and in coming cables in cable alley panel board and painted with powder coating in siemens grey colour and provision for the following incoming and out going accessories all as approved and comprising as under : Location : UWR

Incoming :- a) Provision for MCCB 4 Pole, 40 Amp 415V - 01 No. b) Multifunctional Meter WL4410110000 - 01 No. e) Indicator Lamps (LED type) showing R,Y, B phase - 01 set. Outgoing :- (a) 32A TPN MCB – 3nos. (b) 20A TPN MCB – 1no. (c) 20A DP MCB – 1no. d) Timer & Contactor 20A TP for Street Lighting e) Angle iron base frame as reqd size as per above panel, total leg height 600 mm and grouting in side PCC 150 mm legs and made out of ISA 5050, 50 x 50 x 6 mm thick angle iron duly painted - 01 No. f) Material & Labour for necessary grouting as reqd PCC 1:3:6 (40 mm graded aggregate) Type C2 for foundation of angle iron legs frame work complete - 01 job

Material & Labour for LT heat shrinkable cable Jointing kit suitable for 3.5 core 70 to 150 Sqmm aluminium cable all as directed.

Material & Labour for LT heat shrinkable cable Jointing kit suitable for 3.5 core 185 to 300 Sqmm aluminium cable all as directed.

Material & Labour for removing vegitation, grass, scrubs and bushes or any small tree branches growing in Sub station yard along with fancing, around the pole, under the HT / LT transmission lines, yards or any description by mannually / mechanically and keep the sub station yard neat and clean complete all as specified and as directed. Note :- Unit rate quoted deemed to include to keep the installation neat and clean through out the period of contract and each cleaning will be measured and paid separately.

Material & Labour for Cutting and trimming of tree branches 3 mtr all around of any size obstructing lumination of street light and touching LT / HT Over head line incl removing trimmed tree branches all as directed.

Material & Labour for Earthing complete with galvanised steel earth plate, electrode, 600x600x6.0 mm thick burried directly in ground (earth pit not less than 2.25m deep below normal ground level) connected to GI strip 32x 6 mm thick dia by mens of nuts, bolts, & washers of GI as shown in electrical plate No. 5 of SSR Part-I Connected to earthing ten point all as specified and including necessary earth pit PCC 1:3:6 chanber be 50mm thick PCC 1:2:4 chamber cover with 6mm dia mild steel reinforcement of 10 cm c/c spacing both ways in lieu of CI cover, watering arrangement shall be made with GI pipe light grade of 20mm dia including funnel and protection to earth lead shall be provided with GI pipe light grade 15mm dia unto 7.5 from the earth plate electrode & refilling of soil etc including necessary excavation & earth work in any strata and PCC chamber all as specified and directed by Engr-in-Charge including demolish existing earth pit taking out old materials.

Supply & Fixingin repairs Galvanised iron strip 32 x 6 mm buried in ground / fixed on walls / ceilings by using suitable size GI saddles etc incl taking out old one all as specified.

Supply and fix or laying in trenches / on wall / poles / structures in repairs GI tubing light grade for road crossing for cable protection of the following sizes including necessary suitable size MS flat fixing clamps, fixing screws complete all as directed.

(a) 50 mm dia

(b) 40 mm dia

REPAIR/ MAINTENANCE WORK OF EXTERNAL WATER SUPPLY DAY TO DAY COMPLAINTS FOR BIDGS AT VARUNAPURI, DCRA, UWR, DAD BLDGS UNDER AGE E/M -II OF GE (NW) VASCO.

Labour only for Attending day to day external water supply complaints of all nature i.e. leakage in water supply pipe lines, fittings/fixtures, over flow of overhead tank, less/no water supply including noting the complaints in complaint register complete all as specified and as directed. Note :- Material required for attending complaints shall be measured & paid separately under respective items here-in-after.

Notes for Srl No. 1 :- The rates quoted by the contractor shall also deemed to be included for the following :- (i) The complaints shall be attended and the defects shall be rectified by a team of One Experienced Plumber assisted with two helper, matriculation passed qualified having minimum 03 years experience . (ii) The complaints shall be attended & defect shall be rectified within 08 hrs commencing from date and time of notifying the complaint failing which a penalty @ Rs 500/- per complaint per day (08 hrs) shall be levied upon/imposed on the contractor and recovery shall be made from Contractor's dues. (iii) In case , after checking & attending the defect,if it is not possible to rectify the defect within 08 hrs, the facts shall be brought to the notice of Engineer-in-charge by the contractor/his rep. If Engineer-in- charge is satisfied with contractor's view, no recovery will be made.

(iv) While attending the complaint if earth work is required then the same shall be measured and paid seperately under appropriate item of Sch 'A'/BOQ. However no extra payments shall be made for dewatering. (v) Cutting of GI pipe in position and threading is also deemed to be included in the job quoted rates (Fittings and fixtures shall be measured and paid separetely under respective items of Sch A/BOQ). (vi) All T&P required for attending the complaints shall be provided by the contractor without any extra. (vii) The pipe fitter shall always be in possession of die set complete with cutters,Taps, Pipe wrench ,Chain wrench, Caulking tools, complete set of spanners and ladders etc..,as required at site.

Supply only GI Socket, medium grade, ISI Marked complete all as specified and as directed of following sizes.

GI Socket 15 mm bore

GI Socket 20 mm bore

GI Socket 25 mm bore

GI Socket 40 mm bore

GI Socket 50 mm bore

Supply only GI Elbow, medium grade, ISI Marked complete all as specified and as directed of following sizes.

GI Elbow 15 mm bore

GI Elbow 20 mm bore

GI Elbow 25 mm bore

GI Elbow 40 mm bore

GI Elbow 50 mm bore

Supply only GI Union, medium grade, ISI Marked complete all as specified and as directed of following sizes.

GI Union 15 mm bore

GI Union 20 mm bore

GI Union 25 mm bore

GI Union 40 mm bore

GI Union 50 mm bore

Supply only GI Nipple of different length as per requirement, both end screwed medium grade, ISI Marked complete all as specified and as directed of following sizes.

GI Nipple 15 mm bore

GI Nipple 20 mm bore

GI Nipple 25 mm bore

GI Nipple 40 mm bore

GI Nipple 50 mm bore

Supply only GI reducing socket, medium grade, ISI Marked complete all as specified and as directed of following sizes.

GI reducing socket size 20 x15 mm bore

GI reducing socket size 25 x15 mm bore

GI reducing socket size 25 x20 mm bore

GI reducing socket size 50 x40 mm bore

Supply only GI Tee, Medium Grade, complete all as specified and as directed of following sizes

GI Tee , 15 x 15 x 15 mm bore

GI Tee , 20 x 20 x 15 mm bore

GI Tee , 20 x 20 x 20 mm bore

GI Tee , 25 x 25 x 15 mm bore

GI Tee , 25 x 25 x 20 mm bore

GI Tee , 25 x 25 x 25 mm bore

GI Tee , 40 x 40 x 20 mm bore

GI Tee , 40 x 40 x 25 mm bore

GI Tee , 40 x 40 x 40 mm bore

GI Tee , 50 x 50 x 20 mm bore

GI Tee , 50 x 50 x 25 mm bore

GI Tee , 50 x 50 x 40 mm bore

GI Tee , 50 x 50 x 50 mm bore

Supply only GI plug, solid, heavy duty, complete all as specified and as directed of following sizes.

GI plug, 15 mm bore

GI plug, 20 mm bore

GI plug, 25 mm bore

GI plug, 40 mm bore

GI plug, 50 mm bore

Supply Only PVC 'L' type holder, suitable for aluminium rod, float ball, of following size bore complete all as specified and as directed.

15 mm bore

20 mm bore

25 mm bore

40 mm bore

Supply only PTMT float valve, Sizes as under, with epoxy coated aluminium rod and high density plastic ball complete all as specified and as directed.

PTMT float valve, 15 mm bore

PTMT float valve, 20 mm bore

PTMT float valve, 25 mm bore

PTMT float valve, 40 mm bore

Supply only Gun metal gate valve, with iron wheel head screwed both ends for iron pipe as per IS-778 and fixed including taking out unserviceable one, complete all as specified and as directed of following sizes.

Gun metal gate valve, 15 mm bore

Gun metal gate valve, 20 mm bore

Gun metal gate valve, 25 mm bore

Gun metal gate valve, 40 mm bore

Gun metal gate valve, 50 mm bore

Supply Only lead pig bar complete all as specified and as directed.

Supply Only Lead wool complete all as specified and as directed.

Supply and fixing in replacement 25 to 150 mm long, 6 to 20 mm dia nuts, bolts & washers complete all as specified and as directed.

Taking up or down GI steel tubing of following sizes with connections from Trenches / floors / walls including cleaning for refixing or removal complete all as specified and as directed. Note :- Excavation & earth work shall be measured & paid separetely.

15 mm bore

20 mm bore

25 mm bore

40 mm bore

50 mm bore

Refixing/ relaying, jointing and testing old GI steel tubing of following sizes, retrieved under srl No 16 here-in-before in new or old position at walls,ceiling or floor etc including cleaning or rerunning the old screw threads, with & including providing new GI fittings complete all as specified and as directed. Note :- Excavation & earth work shall be measured & paid separetely.

15 mm bore

20 mm bore

25 mm bore

40 mm bore

50 mm bore

Laying only of GI steel tubing medium grade of following size in old or new position as in trenches/ceiling/walls/Floors with necessary fixing arrangements and including providing new GI fittings complete all as specified and as directed. Note :-(i) Excavation for new location shall be measured & paid separetely. (ii) GI Steel tubing shall be issued under schedule 'B' free for Fixing. (iii) GI fittings should be measured and paid under respective items.

15 mm bore

20 mm bore

25 mm bore

40 mm bore

50 mm bore

Cutting and screwing the existing steel tubing of following size bore for addition & alteration or lengthening screw on pipe to form connector complete all as specified and as directed.

15 mm bore

20 mm bore

25 mm bore

40 mm bore

50 mm bore

Taking up or down CI/DI Pipe of following sizes including all fittings) with spigot and socketed ends and lead tyton joints including burning out lead joints and recovering lead and including cleaning for refixing or removal complete all as specified and as directed. Note:- Excavation & earth work shall be measured & paid separetely.

100 mm bore

150 mm bore

200 mm bore

Supply, laying, jointing and testing in trenches DI pipes class K-9 of standard length spigot and socketed end push type joint with rubber gasket as jointing material, internal cement morter cutting and external surface with bituminious paint ISI marked for followibng sizes all as specified & directed.laid in trenches complete :-

100 mm bore

150 mm bore

200 mm bore

Material and Labour for CI/DI fittings/specials such as Tees of any size and radious, bends, collars, tapers, tail pieces,caps and plugs up to 150 mm bore complete all as specified and directed by Engg-in-charge.

Material and Labour for CI/DI fittings/specials such as Tees of any size and radious, bends, collars, tapers, tail pieces,caps and plugs from 200 to 300 mm bore complete all as specified and directed by Engg-in-charge.

Opening of existing sluice valve including opening of gland cover taking out with stem nut of brass or of stainless steel & refexing the same after with & including replacement of rubber packing, nut & bolts, glands dori etc complete all as specified and as directed of following sizes. Note:- Spare parts under relevant items shall be measured and paid separately under respective items.

100 mm bore

150 mm bore

200 mm bore

Supply only 'stem' made out from stainless steel of sluice valve of following sizes, complete all as specified and as directed.

Stem, 100 mm bore

Stem, 150 mm bore

Stem, 200 mm bore

Supply only 'Stem Nut' made out from stainless steel suitable to match with existing sluice valve, sizes as under, complete all as specified and as directed.

Stem Nut, 100 mm bore

Stem Nut, 150 mm bore

Stem Nut, 200 mm bore

Supply only 'Gland Plate' made out from Cast Iron suitable to match with existing sluice valve, sizes as under, complete all as specified and as directed.

Gland Plate, 100 mm bore

Gland Plate, 150 mm bore

Gland Plate, 200 mm bore

Supply only 15 mm bore Bib tap of PTMT, any tint, high pressure screwed for male/ female threaded, for pipe of size 15 mm bore complete all as specified and as directed.

Material & Labour for Rubber Gasket joint(Tyton) including jointing material for CI/DI Pipe of following sizes complete all as specified and as directed .

100 mm bore

150 mm bore

200 mm bore

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified with all fitting (union, elbow, socket) of the following sizes :-

(a) 25 mm bore size

(b) 20 mm bore size

Supply and fixing rotational moulded polyethylene water storage tank, cylindrical vertical with closed top, 500 litres capacity, tripple layered, hoisted and fixed in position after taking down as existing at site (of any capacity) complete all as specified and as directed.

Supply and fixing rotational moulded polyethylene water storage tanks, cylindrical vertical with closed top, 1000 litres capacity, tripple layered, hoisted and fixed in position after taking down as existing at site (of any capacity) complete all as specified and as directed.

Excavation in trenches not exc 1.5 M wide and not exc 1.5 M in depth for pipe line, etc in soft/ loose soil getting out and levelling of bottom surface to required level all as specified and as directed.

All as per Item No.3.26 above but in soft disintegreted rock/ laterite rock.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick complete all as specified and as directed.

Removing excavated material to a distance not exc 50 m and depositing where directed not exc 1.5 meters above the starting point complete all as specified and as directed.

Surface dressing of uneven surfaces of natural ground, rough excavated surfaces not exceeding 15 cm deep and filled area where ordered shall be trimmed to an even surface horizontal or slopping, by removing vegetation and by scrapping high patches and filling low patches with the scrapping soil to given an even and neat look to the site. complete all as specified and as directed.

Shine Enterprises

OM SAI ELECTRICALS

M/s Ekta Engineering Works

Susheel Enterprises