Works Contract for Erection and transportation of poles paving of HT/LT lines, DT erection works, and other allied works in 11KV G.C Kuppam feeder by proposing new 11KV Karadi Kuppam feeder(non agl) from 33/11KV Ozhugur SS under RDSS in Ozugur sectio

Amount

Excavation and Erection of RCC, REC, PSC poles upto 8.00m length by using JCB/Manual with Base Plate.

Excavation and Erection of RCC, REC, PSC poles above 8.00m length by using JCB/Manual with base plate.

Excavation and Erection of metal supports above 9m/RSJ/Rail pole/Tubular pole with Steel plate.

Excavation and Erection of stay set complete with fixing up stay wire Eye, Bow,Guy Shackle, Binding, Stay Plate etc.

Fixing of HT Tapping X arm / V Cross arms 3 1/2, 4 1/2 & 5 feet

Fixing of LT 3 Phase cross arm

Fixing of HT / LT TI Fitting

Fixing of HT Pin Insulators (11/33KV)

Fixing of LT Pin Insulators

Fixing of HT 11KV stain disc

Fixing of LT Shackle

Fixing of Aluminium knob

Fixing of HT LAS (3 Nos)

Paving and stringing of conductors of sizes upto 7/2.59 mm ACSR or other equivalent conductor/AB Cable. (route length)

Paving and stringing of conductors of sizes above 7/2.59 mm ACSR or other equivalent conductor /AB Cable upto 7/3.35mm ACSR. (route length)

Paving and stringing of conductors of sizes 7/4.09 mm ACSR or other equivalent conductor/AB Cable. (route length)

Erection of Distribution transformer at structures upto 25KVA DT/Metering set.

Erection of Distribution transformer at structure above 25KVA to 100KVA DT.

ERECTION of Single Pole TRANSFORMER STRUCTURE COMPLETE inclusive of following works - Excavation of pole pits sizing 2' X 2' X 6', erection of poles, erection of base plate, erection of structure materials , erection of 11 KV GOS and HG Fuse, Structure Earthing complete , Pole concreting (2' x 2' x 6') for both base and sleeve including supply of jelly, sand and cement by the contractor in the ratio of concreting 1:2:4 , plinth erection with plastering ratio 1:2 including supply of cement and sand , Fixing of Open Type fuse units, HT/LT LAS fixing and LAS earthing through PVC Pipe 0.5" , Provision of bus-bar arrangement, Erection of Stay Set complete, Jumpering, erection of support angles and insulators if any , Alteration of materials in lathe works if any, provision of danger board, 3 Nos Earth pipe including erection of cement collar and painting of pole with Distember (paint and earth bit collar to be supplied by contractor) (without centre support)

ERECTION of Single Pole TRANSFORMER STRUCTURE COMPLETE inclusive of following works - Excavation of pole pits sizing 2' X 2' X 6', erection of poles, erection of base plate, erection of structure materials , erection of 11 KV GOS and HG Fuse, Structure Earthing complete , Pole concreting (2' x 2' x 6') for both base and sleeve including supply of jelly, sand and cement by the contractor in the ratio of concreting 1:2:4 , plinth erection with plastering ratio 1:2 including supply of cement and sand , Fixing of Open Type fuse units, HT/LT LAS fixing and LAS earthing through PVC Pipe 0.5" , Provision of bus-bar arrangement, Erection of Stay Set complete, Jumpering, erection of support angles and insulators if any , Alteration of materials in lathe works if any, provision of danger board, 3 Nos Earth pipe including erection of cement collar and painting of pole with Distember (paint and earth bit collar to be supplied by contractor) (with centre support)

Erection of DP Structure with 11KV AB Switch with stay including fixing of Top Channel, Cross bracing, concreting, painting, earthing, danger board, Colour washing etc., as per board standard.

Transportation of all types and sizes of poles and other associated material from road side to pole pit and vice versa upto 0.50KM

Transporting of all types of poles by bullock cart or other vehicle (for all size of poles including loading and unloading) for a lead upto 5KM

Transporting of all types of poles by bullock cart or other vehicle (for all size of poles including loading and unloading) Above 5KM of lead of every KM

Transporting of Distribution Transformer / Line materials from Sub stores to office/ site upto 10KM distance by engaging 1 ton capacity Minidor(lorry)

Transporting of Distribution Transformer / Line materials from stores to office/ site above 10KM distance by engaging 1 ton capacity Minidor(lorry)

Loading/Unloading of DT upto 100KVA

Loading/Unloading of variouse size of REC, RCC,PSC Poles upto 8.0m length

Loading/Unloading of variouse size of REC, RCC,PSC Poles above 8.0m length

Loading/Unloading of metal Poles of all sizes

Loading of conductor

Unloading of conductor

Loading/Unloading of line material

Dismandling of RCC, REC, PSC & Metal poles of all sizes including the closing of pit

For breaking of mass concrete of all supports

Dismandling of Stay set complete including Stay rod

Dismandling of Stay set complete without Stay rod

Dismandling of conductor of upto 7/3.35/AB Cable including Transporting the conductor to the nearest road side and stocking in coils

Dismandling of Cross arm clamps, TI fittings hardwares, insulators etc.

Earthing of poles with GI wires 4/ 6/8 SWG by coil earthing

Cement Concrete of ratio for individual poles shall be in the ratio of 1:2:4 (1 part Cement, 2 parts coarse sand and 4 parts 20mm aggregate stones chips)(material +labour) sleeve concreting of poles

Cement Concrete of ratio for stay set foundation shall be in the ratio of 1:3:6 (Cement concrete in mixture 1 part cement, 3 part coarse sand, 6 part 40mm size aggregate stone chips).

Provision of muffing on RSJ Poles of 250mm dia X 12" size to prevent rain water entry

Painting of structure materials distribution transformers with 1 coat of Red Oxide paint and 2 coats of aluminium paint of structure pole and writing of transformer details including material cost.

Numbering of each Poles with black letters in Yellow base by using stencils/skilled painters (including cost of paint per pole).The height of the lettering shall be 40mm for numbers and 50mm for alphabets.

Painting of metal pole with 2 or more coats of Red Oxide paint and 2 or more coats of Aluminium paint by either including cross arm per coat using his own brush(including cost of paint per pole)

Painting of all types of X arm and TI fitting with Aluminium Paint (including cost of paint)

Tree cutting

clamp alteration

E.P.F. @13 % should be Entered by the Bidder

E.S.I. @3.25 % should be Entered by the Bidder

G.S.T. @18% should be Entered by the Bidder

Sri Venkatakrishna Engineering Works