REPAIR REPLACEMENT OF VARIOUS UNSV LIGHT FITTINGS LUMINARIES FIXTURES DISTRIBUTION BOXES MCBS WIRING EARTHING FIRE ALARM SOLAR HOT WATER SYSTEM AND CONNECTED MISC EM WORKS FOR ANAND PARBAT AND KWC TIMARPUR AREA UNDER GE DELHI CANTT 10

Amount

Taking down carefully copper/aluminium point wiring (light/fan/socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc including making good the disturbed surfaces to match with the existing complete

Taking down unserviceable main switches, DBs,metal enclosure boxes,bus bars chambers etc from wall / existing main boards and removing from site complete

M&L for point wiring with single core FRLS, PVC insulated, unsheathed multi stranded copper conductor of size 1.5 sqmm alongwith 1.5 sqmm earth wire of multi strand copper conductor (with same specification) drawing through existing conduit pipe including replacement of sunk zinc coated pressed steel terminal box of 1.60mm thick with 3mm thick plastic laminated sheet top cover, brass screws, cup washers etc and making good to the disturbed surfaces to match the existing complete for the following :-

One light point controlled by one switch

One ceiling/exhaust fan point controlled by one switch

One socket outlet 5 Amps controlled by one switch on same board

One socket outlet 5 amps controlled by one switch on independent board

One bell point controlled by one bell push switch

All as per item No 3 above but wiring with 2.5sqmm copper wire and 1.5sqmm earth wire for socket out let 16 Amps on independent board

All as per item No 3 above but wiring with 4 sq mm PVC insulated multi-stranded copper conductor for industrial socket outlet 3 pin 16 / 20 Amps point and one single core 2.5 sq mm PVC insulated unsheathed copper cable as earth continuity conductor

M&L for point wiring concealed type with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable connected to common earth and earth dolly with suitable copper lugs drawing into and including rigid non-metallic PVC surface conduit of 20mm dia or higher, medium grade complete with all PVC conduit accessories,GI metal flush box of 1.60 mm thick suitable for modular/conventional type switches/sockets/fan regulators with cover plates, blanking plates, brass screws, cup washers etc including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified and directed for the followings :- (Note: Rates deemed to be included for GI metal flush box, laminated sheet top cover,modular cover inner and outer, blanking plates etc complete).

One light point controlled by one switch

One ceiling/exhaust fan point controlled by one switch

One socket outlet 5 Amps controlled by one switch on same board

One socket outlet 5 amps controlled by one switch on independent board

One bell point controlled by one bell push switch

All as per serial item No 6 above but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 16 Amps socket outlet point on independent board with 1.5 Sqmm nominal cross sectional area copper conductor cable as continuous earth wire.

All as per item No.6 above but wiring with 4 sq mm PVC insulated multi-stranded copper conductor for industrial socket outlet 3 pin 16 / 20 Amps point and one single core 2.5 sq mm PVC insulated unsheathed copper cable as earth continuity conductor

M&L for point wiring surface type with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable connected to common earth and earth dolly with suitable copper lugs drawing into and including rigid non-metallic PVC conduit/caping casing of 20mm dia or higher, medium grade complete with all PVC conduit accessories,GI metal flush box of 1.60mm thick suitable for modular/conventional type switches/sockets/ fan regulators with cover plates, blanking plates, brass screws, cup washers etc including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified and directed for the following :- (Note: Rates deemed to be included for surfacemounting plastic boxes,laminated sheet top cover,modular cover inner and outer, blanking plates etc complete).

One light point controlled by one switch

One ceiling/exhaust fan point controlled by one switch

One socket outlet 5 Amps controlled by one switch on same board

One socket outlet 5 amps controlled by one switch on independent board

One bell point controlled by one bell push switch

All as per serial item No 9 above but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 16 Amps socket outlet point on independent board with 1.5 Sqmm nominal cross sectional area copper conductor cable as continuous earth wire.

All as per item No.9 above but wiring with 4 sq mm PVC insulated multi-stranded copper conductor for industrial socket outlet 3 pin 16 / 20 Amps point and one single core 2.5 sq mm PVC insulated unsheathed copper cable as earth continuity conductor

S&F Switch piano flush type 5/6 Amps single pole one way 230 Volts complete

S&F Switch piano flush type 15/16 A single pole one way 230 Volts complete

S&F Socket Outlet 2 in 1, 3 pin 5 Amps flush type 230 Volt complete

S&F Socket Outlet 2 in 1, 3/6 pin 5 and 15 Amp flush type 230 Volts complete

S/F Bell push, flush type 5 Amps 230 Volts complete

S&F electronic fan step regulator flush type 120 watt, 230 Volt complete

S&F ding dong bell, AC, 230 volts, single pole complete

S&F lamp holder, 230 volt AC, PVC / Polycarbonate type of angular shape with back plate suitable for batten fittings complete

S&F ceiling rose, 6 Amps, 250 volts, AC with three terminals and PVC / Polycarbonate insulated body of 50 x 25mm size complete.

S&F modular switch 6 Amps, one way, one module 240 volts complete

S&F modular socket, 3 pin 6 Amps,240 volts, 2 module complete

S&F modular switch 16 A, 1 module,240 volts complete

S&F modular socket 6/16 A, 5 pin, 2 module, 240 volts complete

S&F modular Bell push 6 Amps, one module 240 volts complete

S&F modular fan regulator, step type, 120 W, humfree, AC, 230 volts, 2 module complete

Supply and fixing Modular type 25 Amps capacity starter type 2 module type for AC plug unit complete.

S&F sheet metal enclosure with Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB with 20 Amps complete.

M&L in repair for two single core (submain) PVC insulated cable with 4 sqmm nominal cross sectional area 1100 V,stranded copper conductor, multistranded, and one single core green PVC insulated 2.5 sqmm stranded copper conductor earth continuity cable drawn through non metallic rigid PVC conduit 20 mm dia concealed in wall including all conduit and fixing accessories including cutting chases & making disturbed surfaces complete

All as per above item herein before but with 6 sqmm two runs and 4 sqmm one run as earth wire

All as per above item herein before but with 4 sqmm four runs and 2.5 sqmm one run as earth wire

S&F MCB DB, single pole and neutral with 200 Amps rated bus bar, 230 volts, glazed, double door type, IP-43, including connecting all connections of wire to MCBs with proper lugs & making good to the disturbed surface complete for the following :-

S&F of factory made distribution box 4 way, AC, TP & neutral metal enclosure, Glazed double dooor, 415 V, AC, IP-43, concealed type with suitable bus bar, neutral link, earth link suitable complete

S&F of factory made distribution box 8 way, AC, TP & neutral metal enclosure, Glazed double dooor, 415 V, AC, IP-43, concealed type with suitable bus bar, neutral link, earth link suitable complete

S&F of loadline distribution box 4 way, AC, TP & neutral metal enclosure, Glazed double dooor, 415 V, AC, IP-43, concealed type with suitable bus bar, neutral link, earth link suitable for MCCB 63/100 Amps as incomer and MCB SP as out going complete

S&F of loadline distribution box 8 way, AC, TP & neutral metal enclosure, glazed double dooor, 415V AC, IP-43, concealed type with IP-43 protection complete with suitable bus bar, neutral link, earth link suitable for MCCB 125/160 Amps as incomer and MCB SP as out going all as directed.

S&F in repairs for MCB TPN, 240 Volts, AC, 63 amps, breaking capacity 10 KA, 'C' curve and connection by using suitable copper lugs complete

S&F in repairs for MCB TPN, 240 Volts, AC, 40 amps, breaking capacity 10 KA, 'C' curve and connection by using suitable copper lugs complete

S&F in repairs for MCB, DP/SPN, 240 Volts, AC of breaking capacity 10 KA, 'C' curve and connections by using suitable copper lugs complete of following rating :-

16 to 32 Amps

S&F in repairs for MCB SP, 240 Volts, AC, 6 to 32 amps, breaking capacity 10 KA, 'C' curve and connection by using suitable copper lugs complete

S&F in repairs for MCCB 2 Pole, 240 volt, AC, fixed type,32 Amps, 16 kA, suitable for load line DB/LT PB connection complete of following rating :-

S&F in repairs for MCCB 4 Pole, 415 volt, AC, fixed type, suitable for load line DB/LT PB connection complete of following rating :-

63 amps, 25 kA

100 amps, 25 kA

125 amps, 25kA

200 amps, 25kA

S&F in repairs for MCB 32 amps DP with 30 mA, 10 KA, RCBO,IP 20, Dual on position DIN clip type complete all as specified.

S&F in repairs for MCB 40 amps FP with 30 mA, 10 KA, RCBO,IP 20, Dual on position DIN clip type complete all as specified.

S&F in repars for blank plates for MCB space in any type of DBs complete

Supplying and laying in replacement or fixing or passing through pipe, 1100 volts grade PVC insulated aluminium stranded conductor cable served with inner sheathing of PVC tape and overall PVC sheathed in service connections one twin core cable flat or circuler for the following size of cables :-

S&F in repair of 3mm thick plastic laminated sheet cover with brass screws , cup wahser and cutting of grooves for switchs,scoket and regulator etc complete for following sizes.

S&F in repairs of rigid non metalic 25mm dia PVC conduit with all ftgs(tees,bends,elbows,reducers, bell mouth,saddles,pipe hooks) complete.

S&F in repairs of GI flexible conduits 25mm dia with check nut and clamps and accessories complete.

S & F LED Batten type fitting for surface/wall mounted 20W,230V,6500K integrated electronic driver completely pre wired, LED 4 feet fitting with polycarbonate housing & integrated electronic driver complete with connector blok, screws , gutties etc.and removing the UNSV fitting and all as specified and directed.

S & F LED Batten type fitting for surface/wall mounted 9W,230V,6500K integrated electronic driver completely pre wired, LED 2 feet fitting with polycarbonate housing & integrated electronic driver complete with connector blok, screws , gutties etc.and removing the UNSV fitting and all as specified and directed.

M&L for the remove the existing 36/40W tube light fitting batten and refixing the LED type batten up to 1x22 W single sided connection for fixing of LED type tube rod 18 to 22 W , 230V , and necessary internally pre-wired with suitable size copper flexible wire , screws , gutties etc.and removing the UNSV fitting all as specified and directed complete

M&L for the remove the existing 36/40W (T-8 type) tube rod and fixing the Energy efficient LED tube rod 20 W, 230V, Polycorbonate tube light, single side connection and necessary internally pre-wired with suitable size copper flexible wire and remove the UNSV choke and starter and including connecting up with suitable size copper flexible wire ,screws,gutties etc. complete all as specified and directed.

S&F surface mounted LED panel type 36W,230V,5700K complete with driver full window glarefree opal diffuser LED panel of size 2ftx2ft with CRCA powder coated white housing, CDL/Warm type illumination complete with all accessories required for connection and making good the disturbed any type of ceiling and remove the UNSV fittings and all as specified and directed.

S&F recessed type LED panel type 36W,230V,5700K complete with driver full window glarefree opal diffuser LED panel of size 2ftx2ft, suitable for exist false ceiling with CRCA powder coated white housing complete with all accessories required for connection and making good the disturbed any type of ceiling and remove the UNSV fittings and all as specified and directed.

S&F indoor decorative wall light fixture suitable for 10 W LED lamp,230V for soft light ambiance, made up of polycarbonate, spiral B22 base lamp holder used,globe shape, incl LED lamp 10W(warm/CDL type) and remove the UNSV fittings and all as specified and directed.

S&F lighting fixture wall mounted LED bulk head luminaire 10W,230V, made of die cast aluminium with opal diffuser IP 65, complete with mounting Brackets & accessories as required with connections and remove the UNSV fittings and all as specified and directed.

Supply and fixing LED bulb 9W inverter type upto 4 hrs back up, 6500K and remove the UNSV bulb and all as specified and directed.

M&L for the remove the existing 28 W (T 5 type) tube rod and fixing the Energy efficient LED tube rod 18 W, 230V, Polycorbonate diffuser housing,Double side connection, with LED driver out side type, incl and necessary internally pre-wired with suitable size copper flexible wire and remove the UNSV choke, and starter and including connecting up with suitable size copper flexible wire, holders, screws,gutties etc. complete all as specified and directed

Supply and fixing Indoor recessed/surface type mounted LED luminaires round/square type light weight plastic body downlight fitting 15 Watt, CDL/Warm type with all accessories 3 core copper wire for connection, making good the disturbed any type of ceiling and remove the UNSV fittings and all as specified and directed. (Make-

Supply and fixing Indoor recessed/surface type mounted LED luminaires round/square type light weight plastic body downlight fitting 5 Watt, CDL/Warm type with all accessories 3 core copper wire for connection, making good the disturbed any type of ceiling and remove the UNSV fittings and all as specified and directed.

S&F bldg security light LED luminaries with low wattage with pressure die cast aluminium housing, with heat resistant thoughened glass & IP 65 protection and 25 Watt with suitabe size GI pipe bracket,clamps incl taking down old unserviceable one all specified and directed.

S&F security light LED luminaries with low wattage with pressure die cast aluminium housing, with heat resistant thoughened glass & IP 65 protection and 45 Watt with suitabe size GI pipe bracket,clamps incl taking down old unserviceable one all specified and directed.

S&F in repairs for LED type IP 66, bush light with die cast aluminium having with toughened glass 9 W incl fixing arrangements complete all as specified and directed.

S&F, testing and commissioning of common area lighting panel for high rise buildings, with contactor, analog time switch, MCB rating 40 A suitable for 3 Phase 415 Volts and having over and under voltage protecction relay to protect the contactor coil, with panel locking facility, wall mounted type incl necessary cable lugs, necessary copper wirinng to connect exist TPN DB with remove UNSV DB/panel complete all as specified and directed.

S&F in reapirs of garden light fitting 10 watts, IP65 rated Inverted Pyramid Tripod type LED Bollard with soft 360 deg light distribution with tapping from nearest electrical point incl provn of copper wire, PVC conduit,necessary brick/PCC work finishing with fair cement for base fitting all as specified and directed.

S&F in passing through pipe, 10 sqmm 2 core,1100 volts grade heavy duty cable PVC insulated aluminium stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular incl taking down unsv complete all as specified and directed.

M&L for making hole for fixing of exhaust/ventilation fan size 150 mm to 380mm with necessary civil work, alteration in exist ventilation window of iron/aluminium frame as per site requirement complete make good the wall/ventilation window match with exist complete all as specified and directed.

Supply and fixing in repair of 300mm dia, 900 RPM, exhast fan witlh louvers including frame, blades complete and UNSV Ex fan deposit in E/M store yard. .

Supply and fixing of display board made up with acrylic sheet of size 200mm x 100mm and 3mm thick with engraving the mobile Nos. of Lift attendant/Rescuer, OEM AMC rep,JE E/M, AGE E/M and GE with lettter size 10mm in height. The mobile number should be of fluorescent colour/ radium paint which will be visible in dark place (in case of power failure) as well in day light, display board should be tempered proof complete in lift cabin all as specified and directed. (Note:- The rate to be included for necessary drilling/ boring on steel surfaces and screwing the board with necessary steel fastener complete.)

M&L for Inspection, checking, cleaning and testing of fire alarm system 10 Zone window type complete including fire alarm panel, manual call box, hooter,wiring with PA eqpt etc. work portion of bldgs up to G+8 storey bldg through trained/experianced technician of OEM complete all as specified and directed. Notes :- (a) Fire Alarm control panel:- These shall be kept clean by checking for its controls, indicating equipment’s system and all operations/fault indicators including checking of panel circuits for its healthiness and including of healthy battery/UPS/battery charger system. (b) Manual Call Point and Hooter: All items which are installed at common area, stair case shall be tested by actuating the particular detectors every quarterly so as to ensure proper functioning of indicator. (c) Wiring and cables:Complete wiring shall be inspected jointly by contractor, MES rep. (d) Quarterly maintenance schedule submit by the contracor to the department for his approval before going to the quarterly check.(e) Deployed Technician/mechanic fully equiped with necessary tools and plants are deemed to be included in the quoted rate. (f) Arrangement of testing equipment provided by the contractor deemed to be included in quoted rates. (g) Quarterly inspection test report will be submitted to deptt duly signed by user. (h) Mock drill will be conducted once in quarterly in presence of user after completion of cleaning and testing. (j) Adequate manpower shall be deployed at site to carried out for quarterly maintenance check as per CA provision. (k) All the work mentioned in notes above are deemed to be included in the quoted rates.(l) During attending complaint and quarterly maintenance check any spares/items required for replacemnet will done by the technician of OEM (i.e manual call box,hooters, wiring with steel conduit pipe, battery) and spares will be measured and paid separately under relevant items (m) The rates for making necessary arrangement of scaffaolding/ ladders is deemed to be included in the quoted rates.(n) Any damage to fire alaram system during maintenance shall be repaired by the contractor at his own cost.

Supply only flush mounted 16 gauge MS sheet Manual Call Box with micro switch with transparent hinged vandal resistanat cover with SS hammer and chain, red colour complete.

Supply only wall mounted speaker(electronic hooter) in acoustically treated box with 4 watt speaker and line matching transformer, Hi-Intensive sound (80 to 100 db), Colour Red complete all as specified and directed.

Supply only sealed maintenance free battries of 15 AH capacity of 24 Volts capable of running min of 8 hours back up complete all as specified and directed.

Supply only 16 gauge MS conduits 20mm dia alongwith the accessories in surface/recess and making good the exist wall fixed with saddles with base plate after every 500mm distance complete all as specified and directed.

Supply only multi-stranded copper conductor cable 1.5 Sq. mm nominal cross-sectional area, two core, PVC insulated and unsheathed FRLS cable 1100 volts grade for sub main wiring in existing surface/reccessed steel conduit and capping complete with thimbles and ferrules as required complete all as specified and directed.

Supply only GI flexible conduit 20mm dia complete all as specified and directed.

S&F electronic energy meter current rating 10-60 amps, 3x240 V, 50Hz, AC, three phase, four wire, LCD display, Class 1.0 accuracy (PPEM 01) in built CT operated as per IS-13779, made out of FR polycarbonate, dust proof, good mechanical strength incl connection and depositing old meter to MES store complete all as directed

S&F electronic energy meter current rating 10-60 amps, 240 V, 50Hz, AC, single phase, two wire, LCD display, Class 1.0 accuracy (SPEM 36) as per IS-13779, made out of FR polycarbonate, dust proof, good mechanical strength incl connection and depositing old meter to MES store complete all as directed

S&F for LED Based Outdoor Weatherproof Aviation Obstruction Lighting Luminaire wiith Inbuilt AC-DC Converter 48V / 160 – 230 VAC Housed in Die-Cast Aluminium (LM 6) / Aviation Orange Finish Ultra Violet Stabilised Acrylic Lens for directing light Built in Photo Controller / Built in SS Bird Spike Solid State high flux Light Emitting Diode / Intensity: 32.5 Candelas Life: >50000 Hrs / Sealed with EPDM Gasket Power Supply: AC-DC Converter 48V / 160 – 230 VAC Standards: Confirms to ICAO Annex 14-6, FAA AC No. 70/7460-IG, Radio Interference: BS 800/EN 55014 Connections, necessary welding, clamping,mounting with 32mm dia GI pipe, 1.2 mtr height,1.5 sqmm copper wire with 20mm PVC conduit fixing on work portions upto nine storeys height bldg incl taking down UNSV complete all as specified and directed. Make : ITPC AOL30/ Inpocon Aviator / Kratos

M&L for taking down carefully storge type water cooler of any type/make, capacity (40/80 ltrs, 60/120 ltrs) incl discoonection of electric/water supply connections from various locations, servicing with washing, removing of dust particles,cleaning of condenser coil by blower,painting the outer body (including replacement of corroded sheet with new one) writing letters mentioning the MES Ser No,checking of complete wiring , tightening of loose wire connections with proper Lugs / clips. renewal of defective wiring and connector terminal , proper setting of the thermostat and other electrical / Refrigerant controls and refixing to its original position,, testing for proper functioning / cooling effect complete all as specified and directed.

M&L for taking down carefully Refrigerator/Deep freezer of any type/make, capacity (165/185/310/320 Ltrs) incl discoonection of electric supply connections from various locations, servicing with washing, removing of dust particles,cleaning of condenser coil by blower,painting the outer body (including replacement of corroded sheet with new one) writing letters mentioning the MES Ser No,checking of complete wiring , tightening of loose wire connections with proper Lugs / clips. renewal of defective wiring and connector terminal , proper setting of the thermostat and other electrical / Refrigerant controls and refixing to its original position,, testing for proper functioning / cooling effect complete all as specified and directed.

S&F in replacement of starting capacitor/running capacitor, suitable range, 240 volt including making connection complete all as directed.

S&F in replacement of relays suitable for water cooler/freezer all as directed . Makes as per sample

S&F in repairs for overload protection coil 230 Volts for any type water cooler/freezer, ISI marked complete all as specified and directed.

S&F in replacement of thermostate switch of suitable temperature range ISI marked suitable for water cooler/freezer of any make/type complete.

M&L for charging of refrigerant R-22 / R-410A or any other recommended refrigerant gas in water cooler/freezer including detecting leakage and rectify the leakage with proper brazing and testing on full load complete all as directed.

S&F for replacement of capillary tube and stainer for any type freezer/water cooler of capacity.

M&L for replacement of hermatically sealed reciprocating/rotary type (as per existing) compressor unit, incl taking down UNSV complete for watercooler/freezer with charging of refrigerant. (Make as per sample)

S&F in repairs for Printed Circuit Board for control unit for any type of water cooler/freezer as per existing and same make ISI marked, incl taking down UNSV complete all as specified and directed.

M&L for replacement of fan blower motor copper wound for water cooler/freezer, with same rating 220/230 volts,incl taking down UNSV complete . Makes as per sample

S&F for push type water tap made of CP brass suitable for water cooler capacity 80/150 ltrs capacity including taking out old unserviceable tap.

S&F for 60 cm long PVC connector including taking out old unserviceable PVC connector.

S&F for CP angular stop cock with wall flange including taking out old unserviceable stop cock.

S&F for drain tray for water cooler of any capacity including taking out unserviceable drain tray.

S&F for head cover gasket for water cooler of any capacity including taking out unserviceable head cover gasket.

S&F for drain pipe flexible type of existing dia meter for water cooler of any capacity including taking out unserviceable drain pipe.

S&F for magnetic door gasket screw for refrigerator of any capacity including taking out unsv one.

"M&L for servicing, descaling with descaling agents (chemical solvents) for removing all silt/ rust of the solar water heater 500/ 300 LPD capacity solar water heating system and making good any leakages, cutting/ brazing of copper tubings, replacement of gaskets and minor spares/ parts for functioning of complete system (rubber gaskets 63mm dia, flange brass dia 63mm, hose clamps of suitable size, flange pieces, glass rubber beedings with nut, bolts and if any minor spares etc required) including testing complete all as specified and directed [Note :- (a) Rates of spares/ parts as mentioned above and any civil work for MS structure base fixing complete, are deemed to be included in the quoted rate. (b) Replacement of copper tubing of size 12.5mm to 20mm dia will be measured and paid seperately. (c) Contractor or his rep will attend & rectify the complaints with material and labour within 24 Hrs of intimation of breakdown/ complaint. In case the contractor or his rep will not rectify the complaints within 24 Hrs, a penalty of Rs 600/- per Job/ 24 Hrs shall be imposed to the contractor and shall be deducted from his dues.]"

M&L for hose pipe (EPDM) size 25mm inner dia and 36mm outer dia suitable for solar hot water system incl taking down unsv complete all as specified and directed.

M&L for toughened glass 2000 mm x 1000 mm suitable thickness as exist size ISI marked suitable for solar hot water system incl taking down unsv complete all as specified and directed.

M&L for solar plate collector flat type of capacity 100 ltrs, ISI marked incl cover plate, collector box, absorber, suitable insulation incl taking down unsv complete all as specified and directed.

M&L for cylindrical type hot water tank of capacity 500 ltrs made of stainless steel sheet 1mm thick including insulation with PUF 50mm thick of 40 kg/cum density covered with SS 304 stainless steel cladding with 1mm thsick sheet incl taking down unsv complete all as specified and directed.

M&L for cylindrical type hot water tank of capacity 300 ltrs made of stainless steel sheet 1mm thick including insulation with PUF 50mm thick of 40 kg/cum density covered with SS 304 stainless steel cladding with 1mm thick sheet incl taking down unsv complete all as specified and directed.

M&L for taking down hot water tank 300/500 ltrs capacity and replacement of PUF insulation 50mm thick of 40 kg/cum density covered with SS 304 stainless steel cladding with 1mm thick sheet and refixing the same complete all as specified and directed.

M&L for temparature gauge ISI marked dial type haveing range 0 to 100 ºC incl taking down unsv complete all as specified and directed.

M&L for water make up tank of 15 ltrs capacity made of 1.6mm thick mild steel sheet, painting 2 coats of synthetic enamel paint surface & inner surface shall be painted with 02 coat of black bituminous paint incl taking down unsv complete all as specified and directed.

M&L for PVC ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball, ISI marked,15mm bore complete assembly screwed for iron pipe and fixed and taking out UNSV complete all specified and directed.

M&L for lagging to hot water pipes all round with nitryl rubber insulation 9mm thick with 26 SWG aluminium cladding system only for open surface 15 to 32 mm bore pipe work portion upto eight storeys height high rise bldgs and conforming to IS 9842 complete incl taking down unsv complete all as specified and directed.

M&L for MS angle iron,flats,plates,clamps including nuts,bolts,washers, welding,bending,drilling holes for bolts in any shape or size as indicated or directed of making staging of the hot water tank and applying two coats of aluminium paint over a coat of red oxide zinc chrome primer including preparation of steel surface including taking down old unserviceable one complete all as specified and directed.

Supply and laying galvanised steel water tubing medium grade 15mm bore ISI marked screwed socketed joints complete with all tube fitting (such as bends,elbow,tees,short pieces,connectors,caps,plugs and unions,etc) and fixing complete with clips,wall hookswooden plugs,etc.,also cutting,screwing and waste and for making forged bends on piping as required at site including taking down the existing pipe line with fitting complete all as specified and directed.(Note:- laying of pipe line on wall/floors/terrace of high raise buildings up to the 8 th floor by using with suitable clamps, jointing material and necessary accessories and T&P complete necessary arrangement like scaffolding to carry out the work).

All as per above item but 20 mm dia.

Supply and fixing gunmetal gate valve 15mm dia screwed down high pressure with iron wheel head ,screwed both ends for iron pipe including taking out unserviceable valve complete all as specified and directed.

All as per above item but 20 mm dia.

S&F indoor decorative wall mounting, brushed nickel finish fixture with opal glass diffuser suitable, incl 9 W LED lamp (CDL/Warm type) B22 base and remove the UNSV fittings and all as specified and directed.

S&F of decorative polycarbonate gate/post top lights made up of high grade unbreakable polycarnbonate material suitable upto 20W LED lamp (B22), mounting and exist pipe with necessary fixing arrangements,fitting size in width 150/200mm, height 182/227mm incl taking dwn unsv complete all as specified and directed.

Repair of earth pit incl required exacavation, earth work and PCC work to make good damaged/disturbed surfaces of earth pit chamber & making new pit cover of RCC 1:2:4 type B-1 using 20mm graded stone aggregate reinforced and lifting handle on RCC cover with 8 mm MS bars at 150 mm centre to centre both ways incl supply & fixing of wire mesh and funnel including re-connection of earth wire/strip with panel/transformer using GI nut, bolts & washer complete all as specified & directed

Material & labour for earthing with Galvanised Steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground vertically at a depth not less than 2.25metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Galvanised Iron wire of 4 mm dia as earthing lead (upto the body of the equipment) by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and protected by light grade 40mm dia GI pipe connected to main switch board or main control board and GI pipe medium grade 20mm bore for watering and including funnel , wire mesh , RCC pit cover and PCC chamber pit with PCC (1:3:6) type C-2 using 40mm graded stone aggregate, including excavation and earth work in any type of soil , returning , filling in approved soil and disposal of surplus soil to a distance not exceeding 50m all as specified and shown in electrical plate No 5 of SSR 1991(Part-I) complete all as specified and as directed .

M&L for copper tubing 12.5mm to 15mm dia for solar hot water system incl taking down unsv complete all as specified & directed

"M&L for copper tubing 20mm dia for solar hot water system incl taking down unsv complete all as specified & directed

Sch of Credit- Total contract sum shall be calculated after deduction of Sch of Credit amount Credit amount - Rs. 91799.00

NEETU TRADERS (INDIA)

M/s Prakash Enterprises

V M CONSTRUCTION

Saini Enterprises