Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.5 LAccepted-AOC VPO SAKRALI TEHSIL NABHA DISTRICT PATIALA | NABHA | PATIALA | PUNJAB | L1 | Accepted-AOC Rates are Reasonable | |
| 2 | L2₹3.7 L+₹23,591 (6.74%)Rejected-Finance | L2 | Rejected-Finance Rates are higher than L1 |
Tender Value
₹3.7 L
EMD Value
₹7,500
Closing Date
28 Nov 2019, 5:00 pmClosed
EE No. 1 Patiala
EE No. 1 Patiala
Providing Improved Access to Water through Household connections in existing Water Supply Scheme Kalar Majri of Block Nabha Distt Patiala under sub-component 2a of Punjab Rural water and Sanitation Sector improvement project
2019_WB_40614_1
GPWSC Kalar Majri/1/2019-20 dated 19.11.2019
Open Tender
Civil Works
Item Rate
60 days
EE No. 1 Patiala
Please refer Tender documents.
8 documents required · 8 mandatory
₹1,000
Yes
TIA
₹7,500
Yes
27 May 2020
19 Nov 2019
29 Nov 2019
19 Nov 2019
28 Nov 2019
19 Nov 2019
Amount
Repair of Pumping Machinery:-
P/F Column Pipe 3.00" dia G.I. complete in all respects.
P/F Submersible cable 6mm
Repair of Panel Board :-
P/F Kit Kate 100 AMP complete in all respects
P/F digital AMP Meter and bolt meter complete in all respect
P/F Shunt capacitor 4 KVA
Repair of Pump Chamber
White washing (two coat)
Painting two coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint.
With special quality paint
Distempering with dry distemper of approved manufacture two coats over one priming coat to give an even shade.
Applying Pink Primer or-aluminium priming coat including preparation of surface With special quality paint
Painting two coats excluding priming coat with ready mixed paint in all shades on new wood work With special quality paint.
Applying priming coat with methal primer on new steel or iron work incluing preparation of surface and Painting two coats with ready mixed paint for metallic surfaces in all shades on steel or iron work with special quality paint.
Finishing wall with exterior decorative cement based paint such as snowcem robbiacem etc. on new work in two coats to give even shade. Quanity as per Sr. No. 17 Marked “C”
Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make.
Glass panes 4mm thick above 0.40 sqm area.
P/F Pit cover
Scraping
Cement Plaster.
Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another laver of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg/sqm top of RCC slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing etc.
P/F Electric Fan & Tube set ISI Marked equivalent to Crompton
Repair of OHSR
Repair of expansion joint
Relacement of CI Sluice valve
P/F Main Hole cover of OHSR
Repair of brick masonry over flow houdi of size 1.20 x 1.20 x 1.20 m for OHSR complete in all respects as per analysis A-21
Cleaning of OHSR from inside with soidum hyprochloride complete in all respect.
P/F MS Jali on top of OHSR ventilator
Repair of leakage of OHSR bottom and wall complete in all respect.
Development of Water Works
Providing & fixing G.I. Barbed wire 3 ply fencing around the head works site in three rows complete in all respects including cost of winding wire & aluminum painting complete in all respects as per standard Drawing D-6 & 8 (as per Analysis A-6)
Construction of masonry Corner pillar including cost of cement pointing as per standard drawing D-3 & Analysis of Rates A-5 complete in all respects.
Providing & fixing angle iron pickets with angle 40mm x 40mm x 6mm including cost of concrete & painting complete in all respects as per standard Drawing.
Providing & fixing D.Hook complete with MS Bolts size 300mm x 18mm as per standard Drawing D-7 & Analysis A-7
Providing, installing, testing & commissioning of one No. Electronically actuated, Diaphragm Operated, Metering system, Chemical Doshing Chlorinator, suitabel for delivering 0.5 to 6 Liters of Bleaching Powder Solution/ Sodium Hypo solution per hour under maximum delivery pressure upto 7 kg.cm2, and suction lift not less then 1.5, as per DWSS standard specifications.
Supplying,fixing and testing at site Automatic electronic type water level indication system with gun metal float sensor and electrical cable suitable for three phase pump submersible / monoblock to be fixed on existing panel for OHSRs complete in all respects.
Providing proposed water connection to house hold up to wall with providing, laying jointing, testing MDPE pipe lines 15mm i/d=2.00 mtr & G.I. Pipe lines 15mm i/d = 2.50 mtr including cost of specials such as tees, bends, sockets, elbow etc. cutting, threading, and testing in trenches in the ground and ISI marked 15mm i/d GM ferrule as per IS: 2692 and 3" i/d clamp with C.I. bib cock 15mm i/d as per IS:210 with stainless steel spindle of approved make as per CSR 30.65(b) complete (On Existing Pipeline)
Providing & fixing PVC Pipes & Specials 6Kg / cm2 including cost of earth work in excavation & back filing complete.
Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge).
Class PN-1 as per ISI
80mm i/d Sluice Valves flanged
100mm i/d Sluice Valves flanged
Construction of Brick masonry SV Chamber size 0.60x0.60 m complete in all respects.
Construction of Brick masonry SV Chamber size 0.90x0.90 m complete in all respects.
Dismantling Brick or flanged stone flooring without concrete base as per CSR item No 8.19 & Dry brick on edge on paving with the dismantled bricks including sand grouting complete in all respects.
Dismantling of cement concrete 80mm thick cement concrete 1:2:4 over 100mm thick C.C. 1:8:16 and making good the same to its original condition complete in all respects.
Providing proposed water connection to house hold up to wall with providing, laying jointing, testing MDPE pipe lines 15mm i/d=2.00 mtr & G.I. Pipe lines 15mm i/d = 2.50 mtr including cost of specials such as tees, bends, sockets, elbow etc. cutting, threading, and testing in trenches in the ground and ISI marked 15mm i/d GM ferrule as per IS: 2692 and 3" i/d clamp with C.I. bib cock 15mm i/d as per IS:210 with stainless steel spindle of approved make as per CSR 30.65(b) complete (On Proposed Pipeline)
Providing and Fixing of New sign board as per DWSS Specifications.
NSD Constructions
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .