REPAIRS TO GALVALUME ROOF SHEET, WATERPROOFING TREATMENT, CERTAIN B/R WORKS AT CERTAIN MD AND OTM ACCN OF AREA III (NML AREA) OF AGE B/R CENTRAL UNDER GE (W) COLABA, MUMBAI

Amount

Taking down cement plaster on brick/stone or concrete surfaces including racking out joints, hacking for key, scrubbing down with water to receive plaster, including removing debris/rubbish materials off the site out side MD land all as specified and directed. Note : Height of Bldg Up to fourth floor.

Taking down cement plaster on brick/stone or concrete surface including racking out joints, hacking for key, scrubbing down with water to receive plaster, including removing debris/rubbish materials off the site out side MD land all as specified and directed. Note : Height of Bldg above five Up to Eight floor.

M&L 15-20 mm thick ready mix plaster in multy layer with liquid water proofing compound on fair faces of brick wall or concrete surfaces, finished surfaces even and fair, including use of scaffolding, for height of bldgs upto Four stories, all as specified and directed. Name of Manufacturer: M/s Dr Fixit /ACC/ M/s Ultratech Cement Ltd/ M/s Sound buildcare pvt. Ltd/ or other approved equivalent make.

M&L 15-20 mm thick ready mix plaster in multy layer with liquid water proofing compound on fair faces of brick wall or concrete surfaces, finished surfaces even and fair, including use of scaffolding, for Height of Bldg above five up to Eighth floor all as specified and directed. Name of Manufacturer: M/s Dr Fixit /ACC/ M/s Ultratech Cement Ltd/ M/s Sound buildcare pvt. Ltd/ or other approved equivalent make.

M&L 12 mm thick Ready Mix Plaster in single layer of make / brand - ACC's Accoplast / CK Birla's Aerocon / Speed Dry Mix's Ecoplaster / Magic Plast / Build well, on other than fair faces of concrete surfaces in wall (internal surface) and finished surfaces even and smooth without using extra cement all as specified and directed Make:- M/s Dr Fixit /ACC/ M/s Ultratech Cement Ltd/ M/s Sound buildcare pvt. Ltd/ or other approved equivalent make..

Firstly old loose spelled concrete should be chiseled from roof ceiling with the help of scrapers chisel & hammer after that cleaning of rust from mild steel rod and applying cement sprey 3.00 Kg per sqm by paint brush over cleaned surfaces and Material and Labour for 20-25 mm thick ready mix plaster in Multi layer for ceiling on fair faces of brick wall or concrete surfaces, finished surfaces even and fair Including applying three coats of white wash all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil emulsion distemper over a coat of alkali resistant primer coat through authorised applicators of paint manufacturers only of approved shade all as specified and directed Make: "Tractor Uno" of Asian Paints / "Jadoo"of Berger Paints / Nerolac Beauty of Nerolac paints as approved by GE complete all as specifeid .

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles including removing debris out side MD land all as specified and directed.

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6 metres mean radius built in CM 1:6 all as specified and directed.

M&L for preparing newly plastered surfaces of walls / ceilings by scrapping / rubbing and applying two coats of weather proof acrylic exterior paint (100% Acrylic) Base coat of Apex ultima protek duralife and top coat of Apex Ultima protek, Make : Asian Paints) over a coat of alkali resistent primer through authorized applicator only including use of scaffoldings from Ground floor upto 04 storeys height of bldgs all as specified and directed. Make: "Apex Ulitima" of Asian Paints "trucare" Primer / "Weather coat all Guard"of Berger Paints / Dulux weather shield Max of Dulux Paints/Excel top Guard of Nerolac paints as approved by GE complete all as specifeid .

M&L for preparing newly plastered surfaces of walls / ceilings by scrapping / rubbing and applying two coats of weather proof acrylic exterior paint (100% Acrylic) Base coat of Apex ultima protek duralife and top coat of Apex Ultima protek, Make : Asian Paints) over a coat of alkali resistent primer through authorized applicator only including use of scaffoldings from 5th floor upto 08th storeys height of bldgs all as specified and directed. Make: "Apex Ulitima" of Asian Paints "trucare" Primer / "Weather coat all Guard"of Berger Paints / Dulux weather shield Max of Dulux Paints/Excel top Guard of Nerolac paints as approved by GE complete all as specifeid .

M&L for preparation of old plastered or unplastered surface of wall including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying two coats of acrylic Elastomeric water proofing coating Make : Dr fixit rain coat WPC/ equvqlient to Asian Paints) through authorized applicator only including use of scaffoldings complete all as specified and directed. Make and colour as approved by GE all as specified and directed. Note : Up to fourth floor.

All as per item No. 12 above but 5th to 8th floor all as specified and directed. Note : from fifth floor and above

Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings including ridges all as specified and directed.

Dismantling timber in scantlings 40 Sqcm and over in section, in unframed work in any position all as specified and directed.

S&F for Rolled mild steel sections conforming to Gde Fe-290(Gde-165-E) as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails & guides for sliding doors, fixed with angle cleats or other connecting plates all as specified and directed.

M&L multi-rib TM profile high tensile 550 MPA yield strength colour coated galvalume corrugated steel sheet having maximum pitch of 250mm, c/c and minimum 30mm crest depth in length as per site requirement. The feed material is to be manufactured out of 0.50mm (TCT). Total coated thickness with 18-20 microns top coat over 5 microns primer and 8-10mm alkyd backer, zinc aluminium alloy of AZ-150. The sheet shall have a hot dip metallic zinc aluminium alloy coating of zinc 43.5%, aluminium (55%) and silicon (1.5%) with toal mass coating of 150 gms/sqm on both sides. Covered width will be 1020mm and sheet length as per site requirement. The profile is having return leg for proper side lap. The sheet shall be fixed using self drilling/self capping screws with EDPM seal or fixed with 'L' or 'J' type or cranked hook bolts in roof all as specified and directed.

M&L for heavy duty outdoor vitrified tiles dark or light shade 10-12 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.16 sqm and not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shed of tiles laid over and including 20 mm thick screed bed or bedding layer in cement mortar 1:6 all as specified and directed. Make : Johnson tiles / Kajaria /Euro, approved sample as kept in GE Office.

S&F in repairs for stainless steel grade 304 (square/ round/rectangular) of suitable gauge as in gaurd bars / railing /frame work including all fixing arrangement all as specified and directed.

M&L for preparation of new untreated steel surface of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.

M&L multi-rib TM profile high tensile 550 MPA yield strength colour coated galvalume plain steel sheet having maximum pitch of 250mm, c/c and minimum 30mm crest depth in length as per site requirement. The feed material is to be manufactured out of 0.50mm (TCT). Total coated thickness with 18-20 microns top coat over 5 microns primer and 8-10mm alkyd backer, zinc aluminium alloy of AZ-150. The sheet shall have a hot dip metallic zinc aluminium alloy coating of zinc 43.5%, aluminium (55%)and silicon (1.5%) with toal mass coating of 150 gms/sqm on both sides. Covered width will be 1020mm and sheet length as per site requirement. The profile is having return leg for proper side lap. The sheet shall be fixed using self drilling/self capping screws with EDPM seal or fixed with 'L' or 'J' type or cranked hook bolts in roof,complete all as specified and directed by Engr-in-charge.

Taking up or down 15 mm bore steel tubing and connection including cleaning for refixing or removal to store all as specified and directed

S&F 15 mm bore tubes medium grade galvanized iron with all fittings and fixtures fixed to walls and ceilings or laid in floor all as specified and directed

Demolition and breaking up drain pipes (SGSW, AC or RCC, CI ) of internal dia 75/110 mm, set in cement mortar all as specified and directed

S&F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls, 110mm bore all as specified and directed

S&F for PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls, 75 mm bore all as specified and directed

S&F for PVC (SWR) bends any radius, 110 mm bore all as specified and directed

S&F for PVC (SWR) bends any radius, 75 mm bore all as specified and directed

S&F for PVC (SWR) branch piece, single ( single Y) equal or unequal radius, 110 mm bore all as specified and directed

S&F for PVC (SWR) branch piece, single ( single Y) equal or unequal radius, 75 mm bore all as specified and directed

S&F for PVC (SWR) branch piece, single ( single T) equal or unequal radius, 110 mm bore all as specified and directed

S&F for PVC (SWR) branch piece, single ( single T) equal or unequal radius, 75 mm bore all as specified and directed

S&F for PVC (SWR) reducers, 110 mm bore all as specified and directed

M&L for minor cleaning work, removal of loose concrete and filling cracks with polymer modified mortar using Epoxy Mortar and supplying and applying High performance hybrid polyurea elastomeric water proofing coating cold applied of spray / brush applied, PU solvent membrane with an elongation of 600% and tensile strength of 12.6 N/mm2 as per ASTM D 2370, crack bridging ability of 3mm as per ASTM C1305, shore A Hardness of min. 75 as per ASTM D 2240. The system includes final base preparation, epoxy primer application and applying PU solvent or approved equivalent in two coats at 1.5 kg per Sqm etc, complete as per Manufacturer specifications. Supplying and applying High performance hybrid polyurea elastomeric waterproofing coating cold applied of spray / brush applied, PU solvent membrane with an elongation of 600% and tensile strength of 12.6 N/mm2 as per ASTM D 2370, crack bridging ability of 5 mm as per ASTM C1305, shore A Hardness of min. 75 as per ASTM D 2240. The system includes final base preparation, epoxy primer application and applying PU solvent or approved equivalent in two coats at 1.5 kg per Sqm to achieve total dry film thickness of 850 to 1000 microns etc, complete as per Manufacturer specifications over and including padding of ready mixed micro cement concrete Type B1, 1:2:4 , 35 mm average thick concrete on RCC roof surfaces and all other similar works all as specified and directed Make: Dr fixit flexi PU / Asian

S&F for PVC (SWR) reducers, 75 mm bore all as specified and directed

S&F for PVC (SWR) vent cowl, 110 mm bore all as specified and directed

S&F for PVC (SWR) "P" trap, 110 mm bore all as specified and directed

S&F for PVC (SWR) "P" trap, 75 mm bore all as specified and directed

S&F for PVC (SWR) "Q" trap, 110 mm bore all as specified and directed

S&F for PVC (SWR) "Q" trap, 75 mm bore all as specified and directed

Demolition of cement concrete (Unreinforced) in ground floor & pavings n.exc 15 cm thickness (below or above GL) and including removing debris/rubbish materials off the site out side MoD land all as specified and directed.

M&L hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate ) as in plinth protection / path laid in panel including necessary expansion joint filling with bitumen at a certain distance all as specified and directed.

M&L for 100 mm thick PCC 1:2:4 type B-2 (using 40mm graded crushed stone aggregate ) as in hard standing & similar work laid in panel including necessary expansion joint filling with bitumen at a certain distance all as specified and directed.

M&L for PCC 1:4:8 type D2 (using 40mm graded crushed stone aggregate) as in sub base as in floor 75 mm thick finished surfaces even and fair all as specified and directed.

M&L for 30mm thick sand filling below paver block including watering & cosolidation all as specified & directed.

M&L in repairs for machine pressed glossy coloured precast concrete interlocking paver block any shape and sizes, coloured, with grey cement & pigment, 60 mm thick, conforming to IS 15658-2006 of M-35 grade concrete with grey cement and pigment all as specified and directed.

HINDUSTAN BUILDERS

Frends Enterprises

SHREE JAGDISH FURNITURE CO.

SAI SIDDHI CONSTRUCTION

RUPESH CONSTRUCTION CO

SHRI SAI ENTERPRISES

SN CONSTRUCTION

Unitech Enterprises

Nilesh Construction

Bidder Name

Unitech Enterprises

HINDUSTAN BUILDERS

Frends Enterprises

Nilesh Construction

SN CONSTRUCTION

SAHU AND SAHU CO.

SHRI SAI ENTERPRISES

SHREE JAGDISH FURNITURE CO.

SAI SIDDHI CONSTRUCTION

RUPESH CONSTRUCTION CO