Construction of P.W.S. Scheme at Pimpari/Boudhawasti, Tal. Khatav, Dist. Satara

Subwork No 1.Pumping Machinary 3.00HP Sub. Pump

Item No. 1 :-

Providing, erecting and giving test of submersible pump set conforming to IS 8034 and motor conforming to IS 9283, with water proof winding. Pump shall be suitable fopr various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415 V+/- 10%, Ph, 50 Hz A.C. Supply, with cable guard, thrust carbon/fiber bearing to withstand entire hydraullc thrust. The pump set shall be suitable for direct coupling, with suitable suction strainer. Pump should have suitable discharge out let as per manufacturer'sdesign.Antithrust stream lined non return valve shall be provided with the pump 3 m. Submersible copper conductor cable, in single/double run and 2 pair of erection clamp 65 mm width 10 mm thick shall be provided with each pump.

Pump duties H= 135Mtr 3.0HP Submersible Pump

Item No. 2 :-

Sluice valve of PN 1 rating with rising spindle generally conforming to IS 780 for sizes 50 mm to 300 mm dia and IS 2906 for various sizes and above with concrete supports.

50mm dia on delivery

Item No. 3 :-Reflux valves

Reflux valve of PN 1 rating generally conforming to IS - 5312 with renewable gun metal sealing face on swing door with concrete supports (DSR,MJP for Electrical & Mechanical works, P-15)

80mm dia on delivery

Item No. 4 :- Pressure Gauge

Providing Errecting 100 mm dia diaphram type specially designed for swage pumping Pressure Gauge of various capacities

Item No. 5A :- GI Pipe B class 50 mm

Providing ISI mark GI Pipe of following class and dia including all local and central taxes, octroi, inspection charges transportation to stores etc. complete (IS- 1239-2004)

Item No. 5B :- GI Bend B class 50mm

Providing ISI mark GI Bend of following class and dia including all local and central taxes, octroi, inspection charges transportation to stores etc. complete (IS- 1239-2004)

Item No. 6 :- MS Pipes and Specials

Designing Providing, Fabricating M. S. Special cable Tray supports, Drain pipes for D.G. Set, Pipe work& items related to all other similer work incuiding cutting bending & Painting , as per detailed specification.

Item No. 7 :- L.T. Control Panel Board

Designing, Providing , Errecting, Testing & Commissioning with Satsfactory Test & Trial of Various Panel Boards as per detailed specifications.

1) GI sheet fabricated box for panel board 16guage

2) Self Locking arrangement

3) Marine water proof plywood

4) ELCB 63Amp as per BIS 4293-1983

5) Volt Meter

6) Ammiter

7) Capacitor polypropylene condenser (HP x 1.5)

8) Pilot Lamp Set

9) DOL starter

10) Triple pole clad / metal clad switch

11) Iton meatclad change over switch

12) Earthing GI Plate 0.6 x 0.6 x 0.6, charcoal

Item No. 8 :-Cables

Item No. 8A :-.Al armoured cable

From MSEB supply to Main Panel board

3 Core 4Sq. MM Aluminium Armoured Cable

Item No. 8B:- Submersible cable

Submersible cable 3core 4.00 Sq. mm

Subwork No2 .Rising Main 75mm dia HDPE 6Kg Pipe= 400m

Item No: 1- Excavation for foundation /Pipe trenches in Hard Murum including removing the excavated materials upto a distance of 50 M and lift 1.50 m stacking and spreading as directed by Engineer in charge normal dewatering shoring and strutting preparing the bed for the foundation and excluding back filling etc.

In Soil MJP DSR 2023-24

In Hard Murum MJP DSR 2023-24

In HMB MJP DSR 2023-24

In SOFT ROCK MJP DSR 2023-24

In HR CHISELLING MJP DSR 2023-24

Item No: 2- Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete.

75mm dia HDPE Pipes 6KG MJP DSR 2023-24

65 mm dia GI Pipes MJP DSR 2023-24

Item No: 3- Lowering, Laying and Jointing H. D. P. E./M. D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II

75mm dia HDPE Pipes 6KG MJP DSR 2023-24

65 mm dia GI Pipes MJP DSR 2023-24

Item No: 5- Providing and fixing ISI Mark Air Valves Sluice Valves Non Return Valves as below of following diameter including all taxes ( central & local) railway freight inspection charges unloading and loading etc.

20mm Dia Air Valve MJP DSR 2023-24 P/I-15 + 10%

65mm Dia Sluice Valve MJP DSR 2023-24 P/I-15 + 10%

65mm Dia NRV MJP DSR 2023-24 P/I-15 + 10%

Item No: 6- Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion precast RCC frame and cover, etc.complete as directed by Engineer-in-charge.

B.B. masonry valve chamber 60x45, Depth 0.9M with cover MJP DSR 2023-24 P/I-15 + 10%

Item No: 7- Hydraulic testing of GI/PVC pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position.

75mm dia HDPE Pipes 6KG MJP DSR 2023-24

65 mm dia GI Pipes MJP DSR 2023-24

Item No: 8- Refilling the trenches with available excavated stuff with soft materials first over pipeline and then hard materials in 15 cm laters with all leads and lifts including consolidation surcharging etc.

Subwork No 3 .RCC ESR 15000Litre 9m Stagging

Item No: 1- Designing (aesthetically), and constructing RCC elevated service reservoirs of following capacity with RCC staging consisting of columns, internal and external bracings spaced vertically not more than 4.5 metres centre to centre for ESR having capacity upto 500 cum and not more than 6 m c/c for ESRs having capacity above 500 Cum including excavation in all types of strata, foundation concrete, cement plaster with water proofing compound to the inside face of the container including refilling disposing off the surplus stuff within a lead of 50 metres, all labour and material charges including lowering, laying, erecting, hoisting and jointing of pipe, assembly of inlet, outlet, washout, overflow and bypass arrangements as per departmental design, providing and fixing accessories such as M.S. ladder, C.I. manhole frame and covers, water level indicators, lightening conductor, G.I. pipe railing around walk way and top slab, providing spiral stair case from ground level to roof level, M.S. grill gate of 2 M height with locking arrangement of approved design, B.B. masonry chambers for all valves, ventilating shafts, providing and applying three coats of cement paint to the structure including roof slab, epoxy painting to internal surface and antitermite treatment for underground parts of the structure and giving satisfactory water tightness test as per I.S. code. The job to include painting the name of the scheme and other details on the reservoir as per the directions of Engineer-in-Charge.

15,000 Litre RCC ESR 9m Stagging Height Basic Rate + Add 10% for Hilly Area

For 1st 15000Litre Basic Rate for 12% Staging Height 39.02Rs/Liters - 585300.00 rs

Reduce Rate 2% per Meter Stagging Height (Total 2% x 2m)- 35118-585300 = 550182.00 rs

Add 10% for Hilly Area-55018.20+550182.00 = 605200.20 rs

Add 5% for Sesmic ZoneRs. - 30260.01+605200.20 = 635460.21 rs

15,000 Litre RCC ESR 9m Stagging Height

Item No: 2- Providing & Supplying medium class G.I.Pipes of following dia & class including all local & cental taxes octroi inspection trasporation to stores & all cost of jointing materials of labour & giving satisfactory hydraulice testing etc.

100 mm dia G.I. Pipes MJP DSR 2023-24 +10%

Item No: 3- Providing & fixing Air Valves Sluice Valves ,Non Return Valves including all central and local taxes transporatation all labour materials & giving satisfactory hydraulice tsting etc

A) 100 mm Sluice Valves MJP DSR 2023-24+10%

Subwork No 4 .Distribution System

Item No: 1- Excavation for foundation /Pipe trenches in Hard Murum including removing the excavated materials upto a distance of 50 M and lift 1.50 m stacking and spreading as directed by Engineer in charge normal dewatering shoring and strutting preparing the bed for the foundation and excluding back filling etc.

In Soil MJP DSR 2021-22

In Hard Murum MJP DSR 2021-22

In HMB MJP DSR 2021-22

In SOFT ROCK MJP DSR 2023-24

In HR CHISELLING MJP DSR 2023-24

Item No: 2- Providing & Supplying medium class G.I.Pipes of following dia & class including all local & cental taxes octroi inspection trasporation to stores & all cost of jointing materials of labour & giving satisfactory hydraulice testing etc.

90 mm dia HDPE Pipes 6KG MJP DSR 2021-22

75 mm dia HDPE Pipes 6KG MJP DSR 2021-22

80 mm dia GI Pipes MJP DSR 2021-22

65 mm dia GI Pipes MJP DSR 2021-22

Item No: 3- Lowering laying and jointing P.V.C.Pipes / G.I. Pipes of medium class including conveyance from stores to site all labour giving satisfactory hydraulice test etc.

90 mm dia HDPE Pipes 6KG MJP DSR 2021-22

75 mm dia HDPE Pipes 6KG MJP DSR 2021-22

80 mm dia GI Pipes MJP DSR 2021-22

65 mm dia GI Pipes MJP DSR 2021-22

Item No: 5- Providing and fixing ISI Mark Air Valves Sluice Valves Non Return Valves as below of following diameter including all taxes ( central & local) railway freight inspection charges unloading and loading etc.

80mm Dia Sluice Valve MJP DSR 2021-22 P/I-15 + 10%

65mm Dia Sluice Valve MJP DSR 2021-22 P/I-15 + 10%

50mm Dia Sluice Valve MJP DSR 2021-22 P/I-15 + 10%

Item No: 6- Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion precast RCC frame and cover, etc.complete as directed by Engineer-in-charge.

B.B. masonry valve chamber 60x45, Depth 0.9M with cover MJP DSR 2021-22 P/I-15 + 10%

Item No: 7- Hydraulic testing of GI/PVC pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position.

90 mm dia HDPE Pipes 6KG MJP DSR 2021-22

75 mm dia HDPE Pipes 6KG MJP DSR 2021-22

80 mm dia GI Pipes MJP DSR 2021-22

65 mm dia GI Pipes MJP DSR 2021-22

Item No: 8- Refilling the trenches with available excavated stuff with soft materials first over pipeline and then hard materials in 15 cm laters with all leads and lifts including consolidation surcharging etc.

Subwork No 5 .Miscellenious Works

Item no :- 1

Commissioning, running and maintaining the scheme to quantities, rated capacity, including manning necessary personnel such as operator, valveman, etc. as per requirements of the scheme and who should also administer chemical dose for a period of 1 month for individual scheme and for regional scheme, together with training of personnel spared by MJP / Local Body and handing over the scheme to Local Body after completion of the above period as directed by Engineer-in-charge.

Item no :- 2