Providing workstations to newly constructed Sub division office and section offices with allied works at Koratagere in KPTCL Leased Land.

Providing workstations to newly constructed Sub division office and section offices with allied works at Koratagere in KPTCL Leased Land.

Clearing and grubbing road land including uprooting rankvegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable m...

Earth work in surface excavation by manual means for lowering & levelling the ground by chiselling and wedging in Hard rock for all works other than foundation & depth not exceeding 100 mm as per draw...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ra...

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...

Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacte...

Providing and Filling in foundation with granite / trap broken metal 100mm. and down size, with approved sand including hand packing, ramming, watering, including cost of all materials and labour wit...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggre...

Providing and laying in position cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with sup...

do columns upto plinth (Including formwork charges).

do Plinth Beam (Including formwork charges).

Providing and laying in position cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Providing and laying in position cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ t...

do slab (Including formwork charges).

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, ty...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing 20 mm cement plaster (external surface) of mix :1:4 (1 cement: 6 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing s...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...

Providing and laying water proofing treatment to the Water tanks & Liquid Retaining structures with two component acrylic polymer modified cementitious waterproofing membrane with minimum elongation o...

STP (inside) waterproofing with Anticorrosive & protective Coating Providing and Applying two component coal tar epoxy-based coating on inside surface of Sewage & Effluent treatment tank @ 0.30 kg/m2 ...

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural...

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make co...

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make co...

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doo...

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and ...

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. compl...

Providing and fixing aluminium tubular handle bar 32 mm outer dia,3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge.: Polyester powder coated minimum ...

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and ...

Providing and fixing aluminium die cast body tubular type universal hy draulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 ...

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 g/m2 (b...

Providing & Fixing of Mineral Fibre Suspended Ceiling System in the module size of 600x600x19mm with Exposed grid for Hospitals, Shopping malls, Commercial establishments and office complexes. The ti...

Water Bound Macadam Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling ...

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, laid...

Kerb Stones Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (...

Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G...

Providing and fixing Veneer panelling, over50mm x35mm sal wooden frame work at spacing not exceeding 600mm c/c fixed to the floor & ceiling, and top covered out of 4mm thick approved quality Veneer, f...

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is...

STRAIGHT WORKSTATIONS (FRAME AND SEPARATOR) Providing and fixing STRAIGHT WORKSTATIONS consisting of BACK TO BACK unit made out of 75 mm thick MS CRCA powder coated, tile based system for main sprin...

CUBICLE WORKSTATIONS : Providing and fixing CUBICLE WORKSTATIONS consisting of wings made out of 75 mm thick MS CRCA powder coated ,tile based system for main and return spine, Top tile finish 8 mm...

b) T Type 2 wings, Size: 1500mmW x 1500mm D x 1200mm ht.

d) L Type 1 wing, Size: 1500mmW x 1500mm D x 1200mm ht.

Providing and fixing storage unit of 0.75m width made out of 19mm thick commercial ply vertical support finished in approved 1.5mm laminate with 12mm thick ply packing internally finished with enamel ...

Providing and fixing Free Standing Table for Cabin- with frames consisting of 30 mm thick tabletop in 1.5mm thick approved Laminate finish with reverse waterfall edge , 30 mm thick PLY with edge bom...

Providing and fixing Free Standing Table for Cabin- without frames consisting of 25 mm thick PLY table top , 25 mm thick PLY with edge bomded End table,18 mm thick PLY with edge bonded Modesty, Wire ...

FREE STANDING TABLE FOR CABIN - WITHOUT FRAMES Providing and fixing Free Standing Table for Cabin- without frames consisting of 25 mm thick PLPB table top , 25 mm thick PLPB with edge bomded End tabl...

DISCUSSION TABLE - METAL LEG

Size: 900mm dia x 750mm Ht (4-Seater)Providing and fixing discussion table metal leg consisting of 25mm thick PLPB table top edge bounded MS CRCA sheet roud plate at botto...

SINGLE SEATER SOFA

Providing & fabricating SINGLE SEATER SOFA in silver wood frame work with 150mm thick foam backing for seat & back rest clad with two layers of 12mm thick foam of approved make cla...

THREE SEATER SOFA

Providing & fabricating THREE SEATER SOFA in silver wood frame work with 150mm thick foam backing for seat & back rest clad with two layers of 12mm thick foam of approved make clad ...

Providing & fabricating centre table of size 1000mm x 1000mm formed out of 19mm thick commercial ply finished in 1.5mm thick approved laminate with edge lipping with approved edge bindin...

Providing and fixing 450mm W x 450mm D x 685mm Ht Mobile pedestal unit-Wooden with 18mm thick PLPB with edge bonded for body, Two equal drawer and one filing drawer with centralized locking system, Te...

RUNNING COUNTER

Providing & fabricating counter made out of 19mm thick Ply with Postformed Edge, 750mm deep. All the exposed edges to be finished with approved edge binding, the counter top shall be ...

OVERHEAD STORAGE (ABOVE PANTRY COUNTER) - 450mm deep x 450mm ht.Providing & fabricating storage formed out of 19mm thick commercial ply for front, sides & back formed out of 12mm thick marine grade pl...

PANTRY COUNTER - GRANITE TOP

Fabricating and fixing low height storage cabinet of height 850mm and depth 600mm formed of 19mm marine grade plywood formwork/carcass for front, sides & back formed out o...

Providing and fixing chromium plated brass curtain rod with ISI mark hav ing wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., whereve...

Providing & fixing 100% Polyester Curtains with specification of regular wash as per direction of Engineer in charge

Providing & fixing Roller blinds of reputed make 38mm round Aluminium channel with blackout fabric, telting with chain (Ball) system with all necessary fittings and fixtures as per direction of Engine...

MEETING ROOM TABLE Dimension: 4200mm x 900mm x 750mm Providing and Fabricating Meeting Room Table with 19mm ply Finished with 4mm thk Approved Veneer Melamine finished. Table top: 40mm thick table to...

MEDIUM BACK CHAIR - Leatherette with castors Supplying & placing in position Medium back chair with following specification.Seat: Seat to be formed out of bent ply / PVC backing with deformable pre mo...

MEDIUM BACK CHAIR- FABRIC without castors, with collapsible writing desk Supplying & placing in position medium back chair with following specification. Seat: Seat to be formed out of bent ply / PVC b...

Providing and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fix...

Fabricating, supplying and erecting tubular FLAG POLE of height 9 Mtr having three sections with necessary hooks for flag hoisting and providing two coats of red oxide paint and finished with two co...

Ahuja SSA-250DP Amplifier

Ahuja16 external mixer

Ahuja GMB-6C Gooseneck Microphone AND GM-615PA

Speaker Ceiling 6.5 Inch (8 Ohm), White 30 W

Speaker Cable [FINOLEX]1.5 sq mm 2 Core

Microphone Cable

Supply and installation of WXGA Projector (BenQ MW560C WXGA )1200x800,HDMI, (with above spec) the rate shall include all necessary accessories., connectivity HDMI,IR,USB, Display resolution with warr...

Projector Motorized Screen 8ft width x 6ft ht with all installation, materials, labour complete.

Projector Ceiling KIT

Projector HDMI Cable

Projector HDMI Extender And accessories

Projector Audio cable [Projector to Amplifier]

Supplying and fixing of PVC casing and capping on the wall or ceilling using necessary materials like bends,junction box , elbows,screws at an interval of 300mm etc as required. 25mm size-

Supplying and fixing superior quality switch mounting poly carbonate plate with necessary supporting back plate with required nos of machine tools, bolts, nuts etc., complete on the existing metal/PVC...

Supplying and fixing superior quality switch mounting poly carbonate plate with necessary supporting back plate with required nos of machine tools, bolts, nuts etc., complete on the existing metal/PVC...

Supplying and fixing superior quality switch mounting poly carbonate plate with necessary supporting back plate with required nos of machine tools, bolts, nuts etc., complete on the existing metal/PVC...

Supplying and fixing superior quality of modular switch & connected acceessories on existing modular switch plate as per IS 1293. 6Amps one way Switch.

Supplying and fixing superior quality of modular switch & connected acceessories on existing modular switch plate as per IS 1293.- 6Amps 3way socket.

Supplying and fixing superior quality of modular switch & connected acceessories on existing modular switch plate as per IS 1293.- RJ 45/I.O outlet cat -6.

Supplying and drawing UTP-CAT 6E LAN cable.

Wiring for lighting /Power Circuit using one FRLS/PVC insulated 1100v Grade , multistand Copper with Low conductor resistance single core wire in open or concealed system of wiring with specified IS 6...

Supplying of recess mounting non integral type LEDw luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clamps, Power LED swith CCT 6500 degree K,CRI...

Supply of round/square recess/surface mounted rolling type LEDDown light with ......WGU10 LED Lamp Rib Fabricated from diecast aluminium with white powder coatedprewired to mains connector & has swive...

UPS & BATTERY:-Supplying, erecting, testing & commissioning of ON-LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with isolation transformer all accessories complete and Exclud...

Supplying, installation, testing & commissioning of 12V DC, 100AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries.-100 AH capacity.

Supplying, erecting, testing & commissioning of OFF- LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with all accessories complete and Excluding batteries and wiring co...

Supplying, installation, testing & commissioning of 12V DC, 150AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries.-150AH capacity.

Street light Pole :- Fabricating, supplying and erection of ... ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door...

Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete.- Single Arm Bracket with 10...

Supply of LED Street light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with In...

Foundation work for 6 meter street light pole

Earthing of Street light Pole:- Supply ,Installation of 25m GI heavy duty pipe 1.5 meter length for grounding earth with 8 SWG Copper wire 2.5meter length for connecting the street light pole and ...

DATA WORKS :- Supplying & Fixing of switch mounting rack with power manager & cable manager. 9U with 450 mm depth.

Supplying fixing of Network Switches - 48port 10/100 switch.

Supplying fixing of Network Switches - 8 port 10/100/1000 Switch.

Supplying and Fixing of Patch panel for LAN cabling 48 port 10/100 patch panel.

Supplying and Fixing of Patch panel for LAN cabling 16 Port 10/100 patch panell.

Supplying and Fixing of I/O socket with back box single I/O.

Supplying and Fixing of 2mtrs Cat6 Patch cable .

Supplying of four bucket stand alongwith buckets. Complete

Supplying of Hand gloves. Complete

Supplying of first aid box. Complete.

Supplying of SAFETY MASK. Complete.

Supplying of FIRST AID CHART with lamination. Complete

Providing 4.5Kg C02 Wheel Type Supply and installation of 4.5Kg C02 gas valve type Fire Extinugisher, Tro lleyMounted, EasyWeightManagement used UnusedMechanism, Gross Weight 19.1 Kg. empty Weight 14....

Supplying and installation of RUBBER MAT 1mtr x 1mtr -1Omm thick.complete including cost of materials, labour, usage charges of machinery complete as per specifications.

Providing and fixing Naming board for office with ACP back drop of (3mm thickness), with acrylic letters of 3mm thick, M S frame work for back drop, including LED lighting with warrantty of 1years, ...

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-...

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as a...

LANDSCAPING WORKS KSRRB M-300-1. Spreading of sludge farm yard maure or and good earth in required thickness(cost of sludge, farm yard manure and good earth to be paid separately) complete as per spec...

KSRRB M300-2.2. Grassing with Doobs grass including watering and maintance of the lawn for 30 days or more till the grass forms a thick lawn face free from weeds and fit for moving including supplying...

KSRRB M300-3. Making lawns including ploughing and breaking of clod removal of rubbish, dressing and supplying doobs grass and planting at 15cm apart, including and spreading of farm yard manure at ra...

KSRRB M300-4. Maintance of lawns or turfing(rough grassing) for a period of one year including watering etc complete as per specifications. MORTH Specification No.307

KSRRB M300-11. Supply at site of work well decayed farm yard manure from any available source, approved by the Engineer in charge including screening and stackin complete as per specifications. MORTH ...

KSRRB M300-13. Supplying sludge duly stacked at site/store complete as per specifications. MORTH Specification No.308.2

Planting of trees in 0.60m dia holes, 1m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, planting the saplings, backfilling the trench, watering, fixing the tree guard an...

Conveying the plants to the excavated pits and planting the seedling in the pit tying the seedling to the supporting stake at 3 places. Plant : Plumeria alba

Providing and fixing in position artificial Pots with following specification: Recyclable natural fiber material reinforced with clay to achieve different finishes like, stone finish, sand finish clay...

Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement con...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...