Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.7 LAccepted-AOC | L1 | Accepted-AOC Being lowest L1 | |
| 2 | L2₹35.5 L+₹57,420 (1.64%)Rejected-Finance | L2 | Rejected-Finance Being other than L1 | |
| 3 | L3₹38.1 L+₹3.1 L (9.00%)Rejected-Finance | L3 | Rejected-Finance Being other than L1 | |
| 4 | L4₹38.8 L+₹3.8 L (10.9%)Rejected-Finance | L4 | Rejected-Finance Being other than L1 | |
| 5 | L5₹39.5 L+₹4.6 L (13.0%)Rejected-Finance 0 MANPUR CHITBARAGAON CHITBARAGAON BALLIA UTTAR PRADESH 221713 | BALLIA | UTTAR PRADESH | 221713 | L5 | Rejected-Finance Being other than L1 |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
12 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 862 EWS
GE 862 EWS PIN-913862 C/o 56 APO
Certain repair to security wall, fencing and connected items under AOR of Dett A under GE 862 EWS
2022_MES_569750_1
GER-63/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE 862 EWS
Class D cat a i
9 documents required · 9 mandatory
₹500
GE 862 EWS
₹80,000
Yes
23 Jan 2023
17 Dec 2022
14 Jan 2023
17 Dec 2022
12 Jan 2023
31 Dec 2022
Amount
Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground as post embedded in concrete, brick work, masonry work etc,complete all as specified and directed.
Dismantling of old unserviceble fencing wire mesh, including round bars any type, complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm and removing surplus soil to a distance n exc 50m and making good surface in soft / loose of soil, complete all as specified and directed.
M&L for plain cement concrete, type B-2 1:2:4, (using 40 mm graded crushed stone aggregates) in foundation, filling and mass concrete as in post, complete all as specified and directed.
S&F for mild steel work as in posts or struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to Fe-290 Gde E-165, embedding in concrete, complete all as specified and directed. Note :- (i) Size of angle shall be as per standard drgs. (ii) Earth work and concrete shall measured & paid for separately under respective items of this BOQ.
S&F for galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line of wire to be measured) after dismantling of old unserviceble barbed wire complete all as specified and directed.
Supply only GI chain link fencing 4mm dai, made of mild steel GI Mess 50x50mm, complete all as specified and directed
Fixing only chain link fencing including line wires, any mesh, size & type to standards, rails, straining bolts, round bar etc including provision of binding wire, complete all as specified and directed. (Note: 10mm dia round bars and flat iron shall be measured and paid separately under respective items of this BOQ).
Supply only mild steel work in MS flat for securing chain link fencing with posts/ struts and filxed with nuts/ bolts and similar items conforming to Fe-410- (Gde-E-250) quality complete all as specified and directed.
Supply only mild steel TMT round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality comfarming to Fe-410-W, grade E-250, as in fencing complete all as specified and directed. (Note for item No. 9 & 10 : Rate for fixing shall deemed to be included in rates of Srl item No. 8).
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality comfarming to Fe-410-W, grade E-250, as in columns complete all as specified and directed.
M&L for mild steel TMT bars 6mm to 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends as in stirrups, spacers and binders including binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality comfarming to Fe-410-W, grade E-250, complete all as specified and directed.
S&F for concertina coil 600 mm dia, 56 loops, 2.5mm core wire heavy galvanised (wire-275 GSM & strip-200 GSM), tensile strength of wire 1400-1500 N/Sqmm, weight 14.63 Kg/coil, stretchable length 12M inlcuding securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc after dismantling of old concertina coil of any type complete all as specified and directed.
M&L for preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided, complete all as specified and directed.
M&L for reinforced cement concrete 1:2:4 type B-1 (20mm graded crushed stone aggregate) as in foundations, including rafts, footings, foundation beams, lintel over 1.5m, plinth beams, bases for columns and the like complete all as specified and directed
M&L for reinforced cement concrete 1:2:4 type B-1 (20mm graded crushed stone aggregate) as in columns pillars, piers, posts and struts complete all as specified and directed
M&L for use & waste of formwork to sides and soffits of floor or roof beams hunchingm lintel, cantilever etc complete all as specified and directed.
M&L for framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks or portion framed and hung as gates, including pintel hinges, stops, hand made sliding bolt etc and similar work conforming to Fe 410-0 or Fe 310-0 after dismantling structural steel work including welded fabricks frames, gate and framed truss etc after dismantling of structural steel work including welded fabricks frames, gates, framed truss etc complete all as specified and directed.
M&L for rendering 15 mm thick on concrete / brick surface on wall in cement mortar (1:4), finished even and smooth without using extra cement complete all as specified and directed.
Demolition of brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified and directed.
M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed.
Description all as per item No. 22 above but except Bricks NOTE: Old brick retrieved from demolition shall be used.
Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of chalk whitening, complete all as specified and directed.
M&L for preparation of old plastered surfaces of walls and applying one coat of cement base paint, complete all as specified and directed.
M&L for preparation old plastered surface of wall completely and applying one coat of exterior weather proof paint, complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floor and paving n exc 15 cm thickness below or above the ground level complete all as specified and directed.
M&L for palin cement concrete type D-2 1:4:8, (using 40 mm graded crushed stone aggregates) in foundation, filling and mass concrete complete all as specified and directed.
Excavation in trenches, n.exc 1.5m wide and n.exc 1.5m depth for laying of cable and foundation of poles and stays and n. exc 10sqm on plan and getting out in soft/loose soil complete all as specified and as directed.
Returning, filling in trenches including spreading, leveling watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed.
Removing of excavated material to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point all as specified and directed.
RAJINDER CHOUDHARY
CHAND CONSTRUCTION CO
M/s Anil Engineers & Builders
NATIONAL TRADING COMPANY
M/S Darshan Kumar
M/S SV CONSTRUCTIONS
M/S Narinder Pal Choudhary
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .