SPL REPAIR TO BLDG NO E-31 AT ILP LOC EX 60 ENGR REGT UNDER AGE B/R-IV AND AGE E/M-II OF GE (SOUTH) MEERUT CANTT

Amount

Taking down Chowkats or frames exceeding 1.5 sqm but not exceeding 4 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkhats or frame not exceeding 1.5 Sq. m each with shutters without taking off shutters from the frame complete all as specified and directed.

S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

S&F Steel windows box type using 'P' section comprising double frame for gauge and glazed skelton shutter jointly with flat iron 40x3mm complete including hinges, handle, tower bolts, stops, lugs etc complete all as specified and directed. Note:- (i) For the perpose of measurement & payment double shutter with frame shall be considered as one unit (ii) Unit rate quoted against this item shall also include the iron mongreries shown on drgs (iii) gaurd bars glazing & Wire mesh shall be measured and paid for separately

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors and frames/ chowkats; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe-410 or Fe-310 complete all as specified and directed.

S&F 2nd class hard wood, 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples, complete all as specified and directed.

S&F 3 mm thick, plain sheet glass ordinary quality and glazing with oil pane putty in squares not exceeding 0.5 Sq. m in each pane. complete all as specified and directed.

S&F Butt hinges 100mm size, medium weight, cold rolled including necessary screws complete all as specified and directed.

S&F Aluminium handles 125mm size, cast type, anodised including necessary screws complete all as specified and directed.

S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section including necessary screws complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy. complete all as specified and directed.

S&F in repair 25 mm bore drapery curtain rods poweder coated finished as directed with fancy type incl fixing brackets, stops, rollers etc. complete all as specified and directed.

Demolition of PCC in ground floors & pavings not exceeding 15 cm thickness (below or above ground level) (unreinforced) complete all as specified and directed.

M&L for 50mm thick PCC 1:2:4 type B-0 (12.5mm graded aggregate) as in sub base floor etc complete all as specified and directed.

S&F Coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including15mm thick screed in CM (1:6)complete all as specified and directed.

All as per serial item No 16.00 here-in-before but as in vertical surfaces such as skirting/dado's etc over and including 10mm thick rendering in CM 1:4

Material & labour for glazed coloured ceramic tiles of size 450x300x7-8mm thick, on vertical surfaces set and jointed in neat cement slurry and pointed in white/ coloured cement to match with existing work over and including 10mm thick rendering in CM 1:4 complete all as specified & directed.

M&L PCC 1:3:6 type C1 (using 20 mm graded aggregate) as in bed block, copings, kneelers, apex stones, bed plates, water troughs and the like including cutting into bricks of stone wall as reqd for inserting hold fasts complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6 type C1 (20 mm graded stone aggs) as in plinth protection, path including finished surfaces even and smooth without using extra cement complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards / slabs / blankets, any thickness, including cover fillets complete all as specified and directed.

Material & labour for provision of GI frame work(snap grid) suitable for size as in false ceiling of size 605mmx605mm consisting of followings and all as directed:-i) Powder coated GI sections in corporated in frame work confirm to relevant IS Code. ii) The snap grid shall consist of powder coated main /cross tee of size 36.5mmx25mmx1.4mm thick and 25mm x 25m x1.4mm thick, respectively. iii) Snap grid frame shall be fixed to ceiling with and including supporting hangers consisting of 2mm to 4mm dia mild steel GI wire. iv) The main and cross tees shall be jointed at junction/crossings with powder coated angle bracket, of size 15mmx15mmx1.5mm thick, fixed with suitable mild steel, bolts, nuts and washers all as per manufacturer’s instructions. (v) The snap grid (main/cross tee section) shall be supported at ends all along the wall with powder coated angle of size 25mmx25mmx1.4 m thick. (vi) Size of the snap grid shall be 605mm by 605mm. (vii) Minimum average thickness of powder coating shall be 50 micron complete all as specified and directed.

S&F 4mm thick E-board, white laminated, set embossed reinforced designer ceiling board of ocean texture with aluminum coating on back side in ceiling size 60 cm x 60 cm fixed to GI snap grid complete all as specified and directed.

Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. complete all as specified and directed.

M&L for Rendering 15 mm thick in cement mortar (1:4) on bricks or concrete surface, finished even and smooth without using extra cement complete all as specified and directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified and directed.

Material and labour for brick work with burnt clay bricks of straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 complete all as specified & directed.

All as per item No 27.00 here-in-before but except bricks.

Dismantling of Asbestos cement / Fiber (corrugated,semicorrugated, etc.) sheet any description as in roof covering incl ridge and removing from site complete all as specified and directed.

M&L Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding / ridges, fixed with self tapping screws complete all as specified and specified.

S & F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and directed.

S&F MS flate iron as in wind ties for roof cutting tops to shape as directed, drilling holes flat iron fillets including all necessary drilling, bolting or riveting, etc & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed.

S & F MS work as in framed work for roof trusses purlin rafter fastning distance pieces cleats etc (including fixing independently vertical post) complete all as specified and directed.

M&L for preparation of newly plastered surface of wall etc and applying wall putty and thereafter two coat of oil bound distemper (OBD) over one coat of suitable primer complete all as specified and directed.

M&L for preparation of newly plastered surface of wall etc and applying wall care putty and thereafter applying two coats of Cement base paint over a coat of alkali resistence primer in any colour complete all as specified and directed.

M&L for preparation of new or previously untreated wooden surface of any description, not otherwise described over 10 cm width or girth and apply two coat of synthetic enamel paint over over a coat of pink primer complete all as specified and directed.

M&L for preparation of old painted steel & iron surfaces of any description, not otherwise described over 10 cm width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30cm deep and averaging 15 deep and getting out in soft /loose soil. complete all as specified and directed.

M&L 75 mm thick cement concrete 1:3:6 type C-2 using (40 mm graded stone agg) as in sub base complete all as specified and directed.

Removing excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point soil. complete all as specified and directed.

M&L in repair for laying 60 mm thick machine pressed precast PCC coloured interlocking paver block moulded in PVC frame / mould any shape and size conforming to IS 15658-2006 of M-35 grade of approved design with gray cement and pigment to match shade / colour / matrix of tiles set and bedded over and including 25mm thick fine river washed sand duly compacted with surface vibrator laid over compacted sub soil in flooring complete all as specified and directed.

M&L Sand for cushioning, interlocking tiles joint to be filled with sand, including spreading and levelling in layers n exc 25 mm thick. complete all as specified and directed.

S&F powdered coated aluminum window sliding type glazed or gauged of stainless steel wire cloth nominal dia of wire 0.56 mm and average width of aperture 1.18 mm along with aluminum grill 15 micron type DG-117 having size of frame 125 mm x 44.5 mm of 18 gauge aluminum section with 15 micron anodizing size of shutter top bottom and side rail 44.5mm x 44.5 mm x 18 guage & 4.8 mm thick plain sheet glass to be fixed in glazed portion and stainless steel hooks & eye to be provided as stay of shutter etc complete including necessary jointing cleats glazing clips rubber packing anodized aluminum snap beading screws anodized aluminum fittings such as peg stay 150 mm long (01 No for each leaf) hinges type B-21 100 mm long (02 Nos for each leaf) suitable handle (01 No for each leaf ) and 100 mm aluminum tower bolt (2 Nos in each leaf ) complete all as specified and directed

S&F powder coated anodised aluminium Ventilators fixed type with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) incl stainless steel mosquito proofing wire mesh fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame, with one or more rebates including S&F 5.50 mm thick tinted pin headed glass complete all as specified and directed.

S&F Pre-cast cement concrete block masonry 1:2:4 Type B-1 (using 20mm graded stone aggregates) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and directed.

Taking up or down steel tubing and connection 20 mm bore pipe and removing from site. complete all as specified and directed.

Supply, fix 20 mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing complete all as specified & directed.

Supplying and laying of CPVC 20mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling or laying in floors complete all as specified and directed.

Dismantling PVC water tank of capacity exc 250 ltr but not exceeding 500 ltr and removing from site complete all as specified and directed.

S&F triple layer white color 500 Ltrs Rotational moulded polyethylene (PVC) water storage tanks cylindrical vertical with closed top including nipple nuts and washers for fixing inlet, outlet/washout pipes and air vent pipes complete all as specified and directed.

M& L for Ball valves 20 mm dia high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms/ 50mm-1240 gms) complete all as specified and directed

S&F in repair chromium plated 15 mm bore size Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 15 mm dia stop cock/angle cock cast copper alloy chromium plated screwed down high pressure with fancy type screwed both ends for iron or for union. complete all as specified and directed.

S&F in repair Vitreous China wash basin including pedestal, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & rag bolts,32 mm CP waste coupling complete all as specified and directed.

S&F 15 mm dia brass chromium plated central hole wash basin mixture, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstanhead screwed for 15mm dia pipe fixed in repair. complete all as specified and directed.

Supply and fixing PVC Heavy Duty waste pipes of 40/32mm bore suitable for wash hand basins/sinks complete all as specified & directed.

Supply & fixing pressed steel frames for doors with one or more rebates including necessary fixing lugs lugs, hinges, lock strike plates etc completed size of frame 125x60mm made out of 1.25mm MS sheets complete all as specified & directed.

Supply & fix in repairs second class hardwood (SAL) as in wooden scantling, rafter, purlins and like truss work etc framed together with glue pinned at joints, with single or double rebates or as in perlins, rafters etc complete all as specified and directed.

M&L RCC type B1 (1:2:4) using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; n exc. 200mm thick (Horizontal or sloping) Rough finished surfaces of concrete flat complete all as specified and directed.

M&L Makrana white/ Udaipur green stone slab, polished 14 to 16 mm thick (table rubbed & polished) I jambs, window cills, cooking plateforms and the like in CM 1:4 incl pointing in white cement 1:2 using marble dust with admixture of pigment to match with marble slab of Makrana white / any colour incl making of holes for gas pipe and including dismantling of old stone slab/ granite complete all as specified and directed.

Material & labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLS- FLEXIBLE WIRING CABLE. CONFORMING TO IS: 694-1990 PVC insulated, unsheathed copper conductor cable in and including PVC surface conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc, sunk zinc coated pressed steel terminal boxes including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing with 3.0 mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for One Tube light/bulb/fancy/bell/street light point controlled by one, one way switch 05 / 06 Amps.

All as per serial item No 63.00 here-in-before but One ceiling fan/ exhaust fan point controlled by one, one way switch 05 / 06 Amps.

All as per serial item No 63.00 here-in-before but One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch.

All as per serial item No 63.00 here-in-before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch.

All as per serial item No 63.00 here-in-before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board.

Supply & fixing switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified & directed.

Supply & fixing socket outlet 3 pin, 05 / 06 Amps flush type 240 volts complete all as specified & directed.

Supply & fixing switch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified and directed.

Supply & fixing of socket outlet 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified and directed.

Supply and fix lamp holder , PVC / polycarbonate type back plate suitable for batten fitting complete all as specified and directed. .

Supply and fixing LED tube light fitting 4' long wall mounted 20 Watt, 230 V, MS batten with retrifit T8 glass tube, including tube LED 20 watt T8 etc complete all as specified and directed.

Supply and fixing LED luminaire 600 mm x 600 mm,40 watt, 220 V AC recessed type with highefficiency PMMA diffusersoftglare free light completewith driver, holders & LED lamp suitable for roofceiling including connecting up with driver threecore flexible copper conductor cases of suitable size complete all as specified and directed.

Supply and fixed LED security light fitting 35 watt suitable for 230 volt single phase complete with all accessories complete all as specified and directed.

Supply & fixing of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified and directed.

Supply and fixing sheet metal enclosure, Triple pole and neutral AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection including provision for four pole isolator/mcb as incomer with metal double door and flush to wall including all cutting etc complete all as specified and directed.

Supply and fix MCCB for 4 pole 100A 18KA of capacity frame fixing in sheet metal enclosure on wall 415 volt 50Hz using trimble/ligs properly also including all nut and bot reqd fixing complete all as specified and directed.

Supply and fix sheet metal enclosure double door SPN 8 way DB 200 Amps rated copper bus bar, single phase and neutral rated copper bus bar, etc complete all as specified and directed.

Supply and fixing MCB SP, AC, 240 volts of 06 to 40 Amps, B curve, 10 kA,. complete all as specified and directed.

Supply & fixing MCB SPN, AC, 240 volts of 63 Amps, B curve, 10 kA. complete all as specified and directed.

Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade complete all as specified and directed.

Material and labour for sub main wiring with 06 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLS- FLEXIBLE WIRING CABLE. CONFORMING TO IS: 694-1990 with and including continuous earth wire of size 6.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all MS conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed. Note:- One meter of conduit along with 2x6 sq mm wire and one 6.0 sq mm earth shall be measured as one unit length.

Supply, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 16 Sqmm 4.0 core armoured, PVC sheathed with aluminium conductor heavy duty laid in tranchies, fixing on wall, under road crossing through protection pipe etc complete all as specified and directed

Supply / laying and fixing 40mm bore galvanised steel tubes with all fittings, light grade, laid in trenches for cable protection complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 M depth in soft / loose soil and gating out in soft / loose soil complete all as specified and directed.

M&L for washed river dry sand cushioning in trenches 80mm thick before laying the cable and 150mm thick after laying the cable including spreading levelling andhard punning complete all as specified and directed.

Material and labour for contineous brick edging with width equal to the depth of the brick of whole sub class 'B' bricks laid on edge complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n. exc. 25cm thick in soft / loose soil complete all as specified and directed.

Removing surplus excavated materials n.exc. 50 Mtr and depositing where directed at a level n. exc. 1.5 Mtr above the starting point complete all as specified and directed.

Supply and fixing exhaust fan steel body AC single phase 230 V of size 450mm sweep with blade , frame and lauvers complete all as specified and directed.

Taking down Ceiling fan and hook , sealing cable end , dismantling blades and removing fans and blade to stores for safe costudy. complete all as specified and directed.

Supply and fixing new ceiling fans complete with blades, down rods, electronic regulator and ccessories, 230 V, 1400 mm sweep. Min air delivery 245 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor ( BLDC) complete all as specified and directed.

M&L for Ceiling fan hook made from steel structural, bracing support bend into shape for hanging of ceiling fan complete all as specified and directed.

Supply and fix desert cooler electric driven single phase 230 Volt metallic body (GI) , thickness not less than 1.5mm capacity of water not less than 67 Ltr , 1440 RPM with copper winding and power consumption not more than 240 watt, 50 Hz complete all as specified and directed

Arun Construction Co. (BID ID -3506981)

SHAKTI CONSTRUCTION CO (BID ID -3502672)